Products

• Jobber Length Drill Bit: 0.0626″ Dia, 130 °, Cobalt FIREX Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2458
• Engraving Cutter: 300 °, 1/4″ Dia, Tip Radius Point, Solid Carbide Uncoated, 0.452″ LOC, 1/4″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Non-Ferrous Materials
• Boring Bar: 1/4″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Turning Insert: TNMG432-27 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Compression Spring: 1.175″ OD, 2″ Free Length 0.192″ Wire Dia, 145.737 lb Max Load, 339.636 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 3/8'' Shank Dia, 2-5/16'' OAL, 2 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Boring Bar: 0.28″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 3/16″ Dia, 0.15″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Boring Bar: 0.28″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Turning Insert: VCGW220.5FN_A4 CTBH41U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Chucking Reamer: #27, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Exhaust & Intake Mufflers; Type: Muffler; Muffler Type: Muffler
• Ball End Mill: 0.25″ Dia, 5 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Boring Bar: 0.24″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2″ OAL
• Corner Radius End Mill: 0.05″ Dia, 1/4″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.764″ OD, 6.5″ Free Length 0.112″ Wire Dia, 52.54 lb Max Load, 23.773 lb/in Spring Rate, Stainless Steel
• Drawer Slides; Type: Soft-Close Drawer Slide; Extension Style: Full; Slide Length: 400.00; Travel Length: 400.00; Load Capacity (Lb.): 82.000; Width (Inch): 0.5; Additional Information: Mounting Type: Side; Slide Length: 400.00; Material: Stainless Steel;
• Square End Mill: 0.093'' Dia, 0.074'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Chucking Reamer: 0.2797″ Dia, 4.2946″ OAL, 1.2214″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Press Fit Headed Drill Bushing: Type H, #40 ID, 13/64″ OD
• Corner Radius End Mill: 0.062″ Dia, 5/16″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.999″ OD, 2.5″ Free Length 0.177″ Wire Dia, 136.296 lb Max Load, 270.719 lb/in Spring Rate, Stainless Steel
• Press Fit Headless Drill Bushing: P, 63/64″ ID, 1-3/8″ OD 5/8″ OAL, Carbon Steel
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: #26, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Press Fit Headless Drill Bushing: P, 31/32″ ID, 1-3/8″ OD 5/8″ OAL, Carbon Steel
• Corner Radius End Mill: 0.055″ Dia, 0.275″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar
• Compression Spring: 1.41″ OD, 2.75″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 106.62 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Plug Thread Gage: M10x1.25 Thread, 6H Class, Go
• Compression Spring: 1.469″ OD, 2.75″ Free Length 0.177″ Wire Dia, 96.438 lb Max Load, 98.127 lb/in Spring Rate, Stainless Steel
• Boring Bar
• Corner Radius End Mill: 0.031″ Dia, 3/64″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Plug Thread Gage: M10x1.25 Thread, 6H Class, No Go
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 0.97″ OD, 0.75″ Free Length 0.08″ Wire Dia, 22.529 lb Max Load, 60.5 lb/in Spring Rate, Music Wire
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.0625″ Dia, 0.125″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 1.88″ OD, 9″ Free Length 0.207″ Wire Dia, 160.849 lb Max Load, 36.509 lb/in Spring Rate, Music Wire
• Compression Spring: 2.35″ OD, 7″ Free Length 0.207″ Wire Dia, 130.243 lb Max Load, 31.695 lb/in Spring Rate, Music Wire
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 0.94
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Chamfer End Mill: 0.3937″ Dia, 1.1811″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.23 mm OAL, AlTiN Coated
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, 2B, Powdered Metal High Speed Steel, Uncoated 15 mm Thread Length, 80 mm OAL, Right Hand, Series CoroTap 200
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 8; Overall Length: 1.26
• Square End Mill: 0.313'' Dia, 3/4'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 36.5 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 1.22 mm Cutting Width, 3 mm Max Depth
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 3 Flute, 0.0047″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H5 & H6, Series 0391
• Black Double-Sided Polyethylene Foam Tape: 3/4″ Wide, 36 yd Long, 62 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 1.72 mm Cutting Width, 4 mm Max Depth
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 2.77 mm Cutting Width, 5 mm Max Depth
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 283
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.26
• White Double-Sided Urethane Foam Tape: 1-1/2″ Wide, 5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 5.27 mm Cutting Width, 5 mm Max Depth
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 3 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.87 mm OAL, ZrN Coated, Centercutting
• Compression Spring: 1.939″ OD, 9″ Free Length 0.207″ Wire Dia, 156.254 lb Max Load, 34.489 lb/in Spring Rate, Music Wire
• Chucking Reamer: 19/64″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, Cobalt 6 Flute
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 3 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Corner Chamfer End Mill: 0.4724″ Dia, 1.4173″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.74 mm OAL, AlTiN Coated
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 3 Flute, 0.0063″ Chamfer Width, Solid Carbide 3.66 mm OAL, ZrN Coated, Centercutting
• Compression Spring: 1.586″ OD, 5.25″ Free Length 219.119 lb Max Load, 175.702 lb/in Spring Rate, Stainless Steel
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 283
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 3 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.87 mm OAL, Bright/Uncoated, Centercutting
• Roughing & Finishing Mill Straight Shank
• Corner Chamfer End Mill: 0.375″ Dia, 1.125″ LOC, 4 Flute, 0.075″ Chamfer Width, Solid Carbide 3-1/2″ OAL, 3/8″ Shank Dia, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Milling Insert: TPKW 2204PDSR CTPP235, CTPP235, Solid Carbide N/A Finish,
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 0.94
• Compression Spring: 2.291″ OD, 5″ Free Length 156.524 lb Max Load, 83.128 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.1″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Chucking Reamer: #25, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Chucking Reamer: #24, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 3 Flute, 0.0031″ Chamfer Width, Solid Carbide 2.52 mm OAL, ZrN Coated, Centercutting
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 3 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 3 Flute, 0.0063″ Chamfer Width, Solid Carbide 3.66 mm OAL, Bright/Uncoated, Centercutting
• Press Fit Headed Drill Bushing: Type H, 27/64″ ID, 3/4″ OD
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 1-31/32; Additional Information: Knuckles: 2; Hand: Right; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Materia
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Clear Double-Sided Polyester Film Tape: 1/2″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 3 Flute, 0.0047″ Chamfer Width, Solid Carbide 3.31 mm OAL, Bright/Uncoated, Centercutting
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 1-31/32; Additional Information: Knuckles: 2; Hand: Left; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Material
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.26
• Tapered End Mill: 20 ° per Side, 5/16″ LOC, 3 Flutes, Solid Carbide, Square End 5/16″ Shank Dia, 2-1/2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• CNC Storage Accessories; For Use With: Tool Holder Cart; Description: 5 pcs. Tool clamp (for clamp ™12mm)
• Chucking Reamer: #23, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9860; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Internal Boring Bar: 0.1575″ Min Bore, 0.4724″ Max Depth, Right Hand Cut, Carbide 1.1811″ OAL, 0.0039″ Corner Radius
• SNHJ332ENLEH KCSM40 Carbide Milling Insert AlTiN Finish, 10mm Long x 4.52mm Thick
• Black Double-Sided PVC & Foam Tape: 1/2″ Wide, 5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• Spiral Point Tap: M6 x 1, Metric, 3 Flutes, Plug, 6GX, HSS-E, Sirius Finish 80 mm OAL, Right Hand, D7/D8, Series 4638
• White Double-Sided PVC & Foam Tape: 1/2″ Wide, 5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• O-Ring: 5-3/8″ ID x 5-7/8″ OD, 1/4″ Thick, Dash 432, HNBR Round Cross Section
• Chucking Reamer: 5/32" Dia, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Chucking Reamer: 0.1245″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Chucking Reamer: 0.1225″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Compression Spring: 0.588″ OD, 7″ Free Length 0.112″ Wire Dia, 65.988 lb Max Load, 43.068 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.291″ OD, 5.5″ Free Length 0.225″ Wire Dia, 168.233 lb Max Load, 57.806 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.1135″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Ball End Mill: 0.1181″ Dia, 0.1772″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 42 ° Helix, Uncoated, Single End
• Chucking Reamer: 0.1235″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Square End Mill: 0.04'' Dia, 0.325'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.823″ OD, 3.25″ Free Length 0.162″ Wire Dia, 128.13 lb Max Load, 225.383 lb/in Spring Rate, Stainless Steel
• 1/16″ Diam 270° Wrap Angle 0.053″ LOC 2-Flute Uncoated Undercut End Mill 1/8″ Shank Diam, 2″ OAL, 0.031″ Radius, Solid Carbide
• Tapered End Mill: 7 ° per Side, 0.571″ LOC, 2 Flutes, Solid Carbide, Ball End 1″ Shank Dia, 2-1/2″ OAL, AlTiN Finish, Series Runner Cutters
• Square End Mill: 0.1575'' Dia, 0.5512'' LOC, 0.2362'' Shank Dia, 2.2835'' OAL, 5 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series MSM5F
• Corner Radius End Mill: 0.0591″ Dia, 0.0866″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.0591″ Dia, 0.0866″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1562″ Dia, 0.235″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.3937″ Dia, 0.9843″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• 0.7mm, 118° Drill Point, 0.7mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.5mm Flute Length, 38mm OAL, Series 300
• Corner Radius End Mill: 0.3937″ Dia, 0.9843″ LOC, 3 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0787″ Dia, 0.0984″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.175″ OD, 1.75″ Free Length 0.207″ Wire Dia, 176.487 lb Max Load, 580.438 lb/in Spring Rate, Stainless Steel
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0472″ Dia, 0.0709″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 2.75; Overall Length (mm): 2.75; Material: Foam; Projection: 0.1 in; Finish/Coating: Plastic; Maximum Load Capacity: 12.00; Minimum Order Quantity: Foam; Material: Foam; Length
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Clear Double-Sided Polyester Film Tape: 3/4″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Compression Spring: 0.94″ OD, 6.75″ Free Length 0.112″ Wire Dia, 43.464 lb Max Load, 14.785 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Polyimide Film Tape: 2″ Wide, 5 yd Long, 2.3 mil Thick 23 Lb/In Tensile Strength, Acrylic Adhesive, -20 to 350 ° F
• Compression Spring: 1.586″ OD, 3.5″ Free Length 0.162″ Wire Dia, 71.102 lb Max Load, 46.055 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.939″ OD, 4.5″ Free Length 0.207″ Wire Dia, 112.083 lb Max Load, 61.499 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 2; Length (yd): 5.00; Thickness (mil): 5.0000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 250.000; Color: Clear; Liner Material: Paper; Series: 950
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0772MC
• Ball End Mill: 0.019″ Dia, 0.028″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 3/4; Length (yd): 5.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 4
• Duct Tape: 3″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Polyester Film Tape: 3/4″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Cord Stock; Shape: Round; System of Measurement: Metric; Tensile Strength (psi): 725; Coil Length (Feet): 3; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Spiral Flute Tap: #6-40, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Polyester Film Tape: 3/4″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Boring Bar: 0.08″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• 30mm Inside Diam, Headless LM Drill Bushing Liner 42mm Body Outside Diam, 25mm Overall Liner Length
• Boring Bar: 0.08″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Screw Machine Length Drill Bit: 0.3445″ Dia, 120 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1100
• Compression Spring: 2.056″ OD, 7.5″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 51.897 lb/in Spring Rate, Music Wire
• NDCW324TR TN100M Cermet Milling Insert TiCN/NbC Finish
• Ball End Mill: 0.375″ Dia, 0.5″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Single End, Series 2115
• Kyocera SPMT 090308EZ PR1210 Grade PVD Carbide, Square, Positive Rake Angle, Neutral Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 4655
• Chucking Reamer: 0.1775″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• SPMT060208EZ PR1210 Carbide Milling Insert Megacoat Finish, 0.0937″ Thick x 1/4″ Wide
• Corner Radius End Mill: 1/8″ Dia, 5/32″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 0.2188″ Dia, 21/64″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 7/32″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Slide Bolts; Type: Spring Loaded Barrel Bolt; Length (mm): 40.00; Width (mm): 26.50; Finish/Coating: Satin; Additional Information: Weight: 36 g; Screw: 2.7 x 16; Counter Plate Size: 14 x 33 x 0.8 mm; Overall Length: 60.3 mm; Minimum Order Quantity: 304 S
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.015″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Compression Spring: 0.97″ OD, 1.25″ Free Length 0.085″ Wire Dia, 20.016 lb Max Load, 36.769 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Damping Stays; Type: Lid Stay; Capacity: 28.500; Overall Length (mm): 270.0000; Thickness (mm): 30.00; Width (mm): 40.00; Side: Universal; Maximum Opening: 90.000; Finish/Coating: White; Satin; Mounting Hole Size Diameter: 4.000; Applications: For Downwar
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D4 & D5, Series 4634
• Corner Radius End Mill: 0.438″ Dia, 1″ LOC, 0.018″ Radius, 3 Flutes, Solid Carbide 2-3/4″ OAL, 0.438″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.2813″ Dia, 9/16″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 9/32″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Spiral Flute Tap: M2.50 x, 0.45, Metric, 3 Flute, Semi-Bottoming, 6GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D4 & D5, Series 4625
• Kyocera TKFB 16L38010MR PR1225 Grade PVD Carbide, Triangle, Positive Rake Angle, Left-Hand Turning Insert for Light Interruption and Medium-Roughing in (M) Stainless Steel and (P) Carbon/Alloy Steel
• Compression Spring: 1.586″ OD, 3″ Free Length 219.119 lb Max Load, 333.834 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Semi-Bottoming, 6GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D6 & D7, Series 4625
• Jobber Length Drill Bit: 0.0929″ Dia, 130 °, Vanadium High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• TKF16R300-GTP PR1725 Carbide Turning Insert Megacoat Nano Plus Finish, RH, 0.003″ Corner Radius, 0.374″ Thick, Irregular Shape, Series KTKF
• TKFB16R38005-GQ PR1225 Carbide Turning Insert Megacoat Finish, RH, 0.002″ Corner Radius, 0.1575″ Thick, Irregular Shape, Series KTKF
• Boring Bar: 0.176″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.132″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Milling Insert: KDMB08M0ERGP, KCU15, N/A Finish, 0.3150″ OAW
• Boring Bar: 0.152″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Square End Mill: 1/8'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8200
• Boring Bar: 0.152″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Boring Bar: 0.152″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Compression Spring: 1.88″ OD, 4.25″ Free Length 270.619 lb Max Load, 171.34 lb/in Spring Rate, Music Wire
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 2.60; Overall Length (mm): 2.60; Material: Metal; Projection: 0.625 in; Finish/Coating: Black Matte; Maximum Load Capacity: 1.00; Minimum Order Quantity: Metal; Material: Metal
• 5/64″ Diam 270° Wrap Angle 0.0666″ LOC 2-Flute AlTiN Finish Undercut End Mill 1/8″ Shank Diam, 1-1/2″ OAL, 0.0391″ Radius, Solid Carbide
• Compression Spring: 2.644″ OD, 5.75″ Free Length 0.225″ Wire Dia, 146.79 lb Max Load, 43.633 lb/in Spring Rate, Music Wire
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 2.60; Overall Length (mm): 2.60; Material: Metal; Projection: 0.625 in; Finish/Coating: Brushed Nickel; Maximum Load Capacity: 1.00; Minimum Order Quantity: Metal; Material: Me
• Boring Bar: 0.12″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Corner Radius End Mill: 5/16″ Dia, 0.812″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Compression Spring: 2.233″ OD, 5.75″ Free Length 0.192″ Wire Dia, 80.477 lb Max Load, 28.295 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/32″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• AOMT180532R IN2005 Carbide Milling Insert TiAlN Finish, 0.767″ Long x 0.228″ Thick x 0.422″ Wide
• Corner Radius End Mill: 5/16″ Dia, 0.812″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Spiral Flute Tap: M8 x 1.25, Metric Coarse, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, Steam Oxide Finish 0.52″ Thread Length, 2.7188″ OAL, Right Hand Flute, Right Hand Thread, D5, Series 717
• Ball End Mill: 0.1575″ Dia, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, AlTiN Coated, Single End, Series HARVI
• Ball End Mill: 0.1181″ Dia, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, AlTiN Coated, Single End, Series HARVI
• Ball End Mill: 0.0787″ Dia, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, AlTiN Coated, Single End, Series HARVI
• Chamfer Mill: 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Turning Insert: RCMX 16 06 00 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.3150″ Corner Radius, N/A Series RCMX
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• WNMG332-PM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Diamond
• Turning Insert: RCMX 16 06 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3150″ Corner Radius, N/A Series RCMX
• Compression Spring: 2.35″ OD, 7.5″ Free Length 0.225″ Wire Dia, 116.218 lb Max Load, 35.623 lb/in Spring Rate, Stainless Steel
• WNMG333-QM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Triangle
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TNMG332-XM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Diamond
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TNMG332-XF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Diamond
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TNMG332-XMR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Triangle
• TNMG332L-K 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, LH, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Triangle
• TNMG331-LC 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 60° Triangle
• TNMG332R-K 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, RH, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Diamond
• Combination Wrench: Vanadium Steel, Matte Satin Chrome-Plated
• WNMG333-PR 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Diamond
• WNMG333-PM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Triangle
• WNMG332-PM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Trigon
• WNMG332-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Trigon
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• WNMG331-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Triangle
• TNMG332R-K 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, RH, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Triangle
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TNMG331-QM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 60° Square
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.003″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TNMG333-XM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 60° Trigon
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• WNMG332-QM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Triangle
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• TNMG332-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Diamond
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GFT0.0629 IC1028, Solid Carbide TiAlN & TiN Finish, Neutral, 0.0629″ Cutting Width, Series SlimGrip
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 0.065'' Dia, 0.195'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.3125″ Dia, 1.625″ LOC, 2 Flute, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 3/64'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 40 ° Helix, AlTiN+ Coated, Corner Radius End, Centercutting, Series 6/44