Products

• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 40 ° Helix, AlTiN+ Coated, Corner Radius End, Centercutting, Series 6/44
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 40 ° Helix, AlTiN+ Coated, Corner Radius End, Centercutting, Series 6/44
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar: 0.12″ Min Bore, 0.6″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.12″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Chamfer Mills; Cutter Head Diameter (Decimal Inch): 0.1250; Number Of Flutes: 2; End Type: Single; Included Centerline Angle: 45; Included Side Angle: 45; Length of Cut (Inch): 1/16; Shank Diameter (Decimal Inch): 0.1250; Shank Diameter (Inch): 1/8; Overa
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GFT1.6J IC1008, Solid Carbide TiAlN & TiN Finish, 0.0629″ Cutting Width, Series SlimGrip
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GFT0.0629 IC1008, Solid Carbide TiAlN & TiN Finish, Neutral, 0.0629″ Cutting Width, Series SlimGrip
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar: 0.16″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 0.031″ Dia, 3/64″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GCM3002GF T2500A, Cermet Uncoated, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, TiAlN Finish, Spiral Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 177
• Grooving Insert: GCM3002ML T2500A, Cermet Uncoated, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM3015RG T2500A, Cermet Uncoated, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Milling Insert: XDKT 11T304SR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Milling Insert: XDKT 11T304SR-F50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Milling Insert: XDKT 11T308SR-F50 CTPM225, CTPM225, Solid Carbide N/A Finish,
• Boring Bar: 0.12″ Min Bore, 1/2″ Max Depth, Left Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Milling Insert: RPHX 1204M8SN CTCP230, CTCP230, Solid Carbide N/A Finish,
• Boring Bar: 9/64″ Min Bore, 1/2″ Max Depth, Left Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Milling Insert: XDKT 11T312SR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/16″ Dia, 5/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 3/16″ Shank Dia, 50 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM4F
• Compression Spring: 0.588″ OD, 9″ Free Length 0.098″ Wire Dia, 46.583 lb Max Load, 17.862 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.881″ OD, 6.75″ Free Length 0.112″ Wire Dia, 46.148 lb Max Load, 16.807 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 6.75″ Free Length 0.207″ Wire Dia, 217.732 lb Max Load, 98.021 lb/in Spring Rate, Music Wire
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 6.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Deci
• Compression Spring: 2.585″ OD, 5.75″ Free Length 0.225″ Wire Dia, 149.99 lb Max Load, 45.193 lb/in Spring Rate, Music Wire
• Compression Spring: 1.175″ OD, 2.375″ Free Length 0.177″ Wire Dia, 118.221 lb Max Load, 189.633 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.028″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Combo Drill & Countersink: #0, 1/8″ Body Dia, 118 ™, Cobalt TiAlN Finish, 1/32″ Point Dia, 1-1/4″ OAL, Right Hand Cut, Series 0915
• 5/16″ Head Diam, 5/16″ Shank Diam, 4 Flute 90° High Speed Steel Countersink Oxide Finish, 2-1/2″ OAL, Double End, Straight Shank, Right Hand Cut
• Screw Machine Length Drill Bit: 0.032″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Swivel Top Plate Caster: Polypropylene, 4″ Wheel Dia, 1-1/4″ Wheel Width, 247 lb Capacity, 5″ OAH 2.5″ Plate Length, 3.69″ Plate Width, Side Pedal Brake
• Compression Spring: 2.056″ OD, 5.5″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 70.138 lb/in Spring Rate, Music Wire
• Clear Double-Sided Polyester Film Tape: 3/4″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Compression Spring: 1.351″ OD, 2″ Free Length 0.207″ Wire Dia, 156.182 lb Max Load, 340.513 lb/in Spring Rate, Stainless Steel
• CCMT120408GK CA320 Carbide Turning Insert TiCl2O3/Ti Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 80° Diamond, Series CA3
• Compression Spring: 1.41″ OD, 3.5″ Free Length 0.162″ Wire Dia, 79.395 lb Max Load, 57.037 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 5.5″ Free Length 0.225″ Wire Dia, 244.756 lb Max Load, 131.218 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.625″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 31.289 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 2″ Free Length 0.085″ Wire Dia, 26.67 lb Max Load, 26.05 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 0.875″ Free Length 0.095″ Wire Dia, 27.09 lb Max Load, 75.803 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 0.875″ Free Length 0.105″ Wire Dia, 47.917 lb Max Load, 133.5 lb/in Spring Rate, Music Wire
• Combo Drill & Countersink: #5, 7/16″ Body Dia, 118 ™, High Speed Steel TiN Finish, 3/16″ Point Dia, 2-3/4″ OAL, Right Hand Cut
• Compression Spring: 0.97″ OD, 1.75″ Free Length 0.085″ Wire Dia, 20.016 lb Max Load, 25.132 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 1.5″ Free Length 0.08″ Wire Dia, 16.957 lb Max Load, 22.991 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 1″ Free Length 0.095″ Wire Dia, 27.09 lb Max Load, 63.874 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.764″ OD, 9″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 9.841 lb/in Spring Rate, Stainless Steel
• Turning Insert: DNMG432TM T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Ball End Mill: 0.125″ Dia, 1″ LOC, 2 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.1875″ Dia, 0.625″ LOC, 3 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Compression Spring: 0.823″ OD, 5.25″ Free Length 0.125″ Wire Dia, 65.649 lb Max Load, 40.024 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 7″ Free Length 0.125″ Wire Dia, 41.475 lb Max Load, 11.298 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.056″ OD, 4.25″ Free Length 249.222 lb Max Load, 141.738 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 7.5″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 12.309 lb/in Spring Rate, Music Wire
• Compression Spring: 2.526″ OD, 5.75″ Free Length 0.225″ Wire Dia, 153.33 lb Max Load, 46.873 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 9.5″ Free Length 38.293 lb Max Load, 7.344 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 3.5″ Free Length 0.162″ Wire Dia, 76.412 lb Max Load, 52.819 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.881″ OD, 1.875″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 26.701 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 7.5″ Free Length 36.876 lb Max Load, 8.719 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 2.25″ Free Length 0.085″ Wire Dia, 20.016 lb Max Load, 19.092 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.1181″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Quick Release Hinge: 4 Mounting Holes Stainless Steel, Satin Finish
• Quick Release Hinge: 4 Mounting Holes Stainless Steel, Satin Finish
• UHMW Film Tape: 1″ Wide, 5 yd Long, 10 mil Thick 60 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Compression Spring: 1.88″ OD, 5.5″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 83.386 lb/in Spring Rate, Music Wire
• Compression Spring: 2.526″ OD, 8″ Free Length 0.225″ Wire Dia, 153.33 lb Max Load, 33.915 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2.125″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 23.287 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 1.75″ Free Length 0.092″ Wire Dia, 30.897 lb Max Load, 31.32 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 2.25″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 16.603 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.113″ Dia, 135 °, High Speed Steel TiCN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Combo Drill & Countersink: #7, 5/8″ Body Dia, High Speed Steel Bright (Polished) Finish, 1/4″ Point Dia, 1/4″ Point Length, 3-1/4″ OAL, Right Hand Cut
• TCMX32.52-WM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 5/32″ Thick, 60° Trigon
• Jobber Length Drill Bit: 0.5781″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.05″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.351″ OD, 2.375″ Free Length 0.192″ Wire Dia, 128.683 lb Max Load, 196.35 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.045″ Dia, 0.135″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.41″ OD, 4.5″ Free Length 0.148″ Wire Dia, 62.518 lb Max Load, 30.776 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9407; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Spiral Point Tap: M2, Metric & DIN 371, 2 Flutes, Plug, 6H, HSS-E, Steam Oxide Finish 6 mm Thread Length, 45 mm OAL, Right Hand, Series TC216
• Compression Spring: 1.528″ OD, 6″ Free Length 0.135″ Wire Dia, 45.339 lb Max Load, 14.299 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.047″ Dia, 0.141″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/16″ Dia, 0.188″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Point Tap: #6-32, UNC, 3 Flutes, Plug, 2B/3B, Powdered Metal, Uncoated 0.435″ Thread Length, 2″ OAL, Right Hand, H3, Series 772
• Ball End Mill: 0.05″ Dia, 0.075″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Point Tap: #4-40, UNC, 3 Flutes, Plug, 2B/3B, Powdered Metal, Uncoated 9/16″ Thread Length, 1-7/8″ OAL, Right Hand, H2, Series 772
• Spiral Point Tap: #8-32, UNC, 3 Flutes, Plug, 2B/3B, Powdered Metal, Uncoated 29/64″ Thread Length, 2-1/8″ OAL, Right Hand, H3, Series 772
• TNMM333-QR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 60° Trigon
• TNMM332-PR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Diamond
• Ball End Mill: 0.0625″ Dia, 0.188″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.035″ Dia, 0.052″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Chucking Reamer: #22, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• #87, 130° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 3.81mm Flute Length, 1-1/2″ OAL, Series 302
• Corner Radius End Mill: 1/16″ Dia, 0.188″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0938″ Dia, 3/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0938″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 0.037'' Dia, 0.111'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.3819″ Dia, 118 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 223
• Ball End Mill: 0.0937″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• O-Ring: 0.88″ ID x 1.38″ OD, 0.22″ Thick, Ethylene Propylene Diene Monomer with SS Screen Round Cross Section
• Chucking Reamer: 0.1575" Dia, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7986; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0507MC
• Compression Spring: 0.97″ OD, 1.5″ Free Length 0.092″ Wire Dia, 24.83 lb Max Load, 31.487 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.058″ OD, 1.75″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 35.848 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.0156″ Dia, 0.0313″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• White Double-Sided Polyethylene Foam Tape: 3/4″ Wide, 36 yd Long, 62.5 mil Thick, Rubber Adhesive
• Compression Spring: 0.881″ OD, 2.75″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 17.646 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 33.167 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.25″ Free Length 0.112″ Wire Dia, 59.862 lb Max Load, 122.938 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 1.75″ Free Length 0.095″ Wire Dia, 36.321 lb Max Load, 39.73 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 1″ Free Length 0.112″ Wire Dia, 42.212 lb Max Load, 115.787 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 2.875″ Free Length 0.085″ Wire Dia, 24.795 lb Max Load, 13.872 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 1.5″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 60.552 lb/in Spring Rate, Music Wire
• VBMT160404GP TN620 Cermet Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 35° Diamond, Series HYBCERM
• Compression Spring: 0.881″ OD, 2.625″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 18.544 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 1″ Free Length 0.125″ Wire Dia, 77.458 lb Max Load, 230 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, ZrN Finish 1″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 891
• 3/16″ Head Diam, 3/16″ Shank Diam, 4 Flute 110° High Speed Steel Countersink Oxide Finish, 2″ OAL, Double End, Straight Shank, Right Hand Cut
• Compression Spring: 0.97″ OD, 0.875″ Free Length 0.135″ Wire Dia, 69.315 lb Max Load, 304.878 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 3.25″ Free Length 0.085″ Wire Dia, 24.795 lb Max Load, 12.183 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 2.125″ Free Length 0.092″ Wire Dia, 30.897 lb Max Load, 25.269 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 1.625″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 55.203 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 2.5″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 19.398 lb/in Spring Rate, Music Wire
• Compression Spring: 0.94″ OD, 1.375″ Free Length 0.112″ Wire Dia, 56.38 lb Max Load, 96.401 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 3.5″ Free Length 0.085″ Wire Dia, 20.016 lb Max Load, 11.929 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 2.25″ Free Length 0.095″ Wire Dia, 27.09 lb Max Load, 25.323 lb/in Spring Rate, Stainless Steel
• Cord Stock; Shape: Round; System of Measurement: Metric; Tensile Strength (psi): 725; Coil Length (Feet): 20; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Compression Spring: 0.97″ OD, 2.5″ Free Length 0.095″ Wire Dia, 36.321 lb Max Load, 26.9 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.1575″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• TNMM432-QR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Diamond
• TNMM434-PR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 3/16″ Thick, 60° Diamond
• TNMM432-PR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Triangle
• Turning Insert: TNMM 22 04 08-QR 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Triangle, Series TNMM-QR
• Turning Insert: DNMG442SH AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Turning Insert: CNMG543SM T6120, Solid Carbide TiCN & TiN Finish, Neutral, 5/8″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Compression Spring: 0.764″ OD, 6.75″ Free Length 0.112″ Wire Dia, 52.54 lb Max Load, 22.863 lb/in Spring Rate, Stainless Steel
• Turning Insert: DNMG442SH AH630, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Compression Spring: 0.881″ OD, 8″ Free Length 0.105″ Wire Dia, 38.834 lb Max Load, 10.965 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.644″ OD, 4.25″ Free Length 196.818 lb Max Load, 89.031 lb/in Spring Rate, Music Wire
• Grooving Insert: QI-NJTF 1135, Solid Carbide Neutral, 0.1969″ Cutting Width, 0.1378″ Max Depth, Series CoroCut QI
• Grooving Insert: QI-NJTF 1145, Solid Carbide Neutral, 0.1969″ Cutting Width, 0.1378″ Max Depth, Series CoroCut QI
• Compression Spring: 2.703″ OD, 4.25″ Free Length 192.735 lb Max Load, 85.828 lb/in Spring Rate, Music Wire
• Grooving Insert: QI-NJTF 1125, Solid Carbide Neutral, 0.1969″ Cutting Width, 0.1378″ Max Depth, Series CoroCut QI
• Compression Spring: 1.41″ OD, 6.75″ Free Length 0.207″ Wire Dia, 209.56 lb Max Load, 88.439 lb/in Spring Rate, Music Wire
• Grooving Insert: QI-NJTF 1105, Solid Carbide Neutral, 0.1969″ Cutting Width, 0.1378″ Max Depth, Series CoroCut QI
• Milling Insert: LDFT 1504PDSR-29 CTCP230, CTCP230, Solid Carbide N/A Finish,
• Impact Socket: 1/2″ Drive 6-Point, 38 mm OAL
• Impact Socket: 3/4″ Drive 6-Point
• Turning Insert: VCMT332-FM4 WSM01, Solid Carbide TiAlN Finish, Neutral, 0.6540″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VCMT-FM4
• Impact Socket: 3/4″ Drive 6-Point
• Impact Socket: 3/4″ Drive 6-Point
• Chucking Reamer: #21, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Ball End Mill: 0.118″ Dia, 0.354″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 0.999″ OD, 2.125″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 31.664 lb/in Spring Rate, Music Wire
• Impact Socket: 3/4″ Drive 6-Point
• Ball End Mill: 0.039″ Dia, 0.117″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: CNMG160608-UR YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.6300″ Long, 5/8″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG160612-UR YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.6300″ Long, 5/8″ Inscribed Circle, N/A Series CNMG
• Jobber Length Drill Bit: 0.4219″ Dia, 118 °, High Speed Steel Bright/Uncoated, 5.375″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: DNMG150608FW5 WSM20S, TiAlN, Al2O3 & Al Finish, Neutral, 1/2″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Ball End Mill: 0.1875″ Dia, 0.375″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Turning Insert: DNMG150604FW5 WSM10S, TiAlN, Al2O3 & Al Finish, Left Hand, 1/2″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Ball End Mill: 0.1875″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• 100° 1/8″ Diam 1-1/2″ OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 3/8″ Flute Length, 1/8″ Shank Diam
• Jobber Length Drill Bit: 0.1732″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Compression Spring: 0.881″ OD, 2.125″ Free Length 0.098″ Wire Dia, 41.442 lb Max Load, 39.307 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 2.625″ Free Length 0.092″ Wire Dia, 30.897 lb Max Load, 20.093 lb/in Spring Rate, Music Wire
• Chucking Reamer: #20, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• 1/4″ Head Diam, 1/4″ Shank Diam, 1 Flute 82° Cobalt Countersink Uncoated, 1-1/2″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 1.293″ OD, 5″ Free Length 0.25″ Wire Dia, 315.449 lb Max Load, 373.234 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 6.75″ Free Length 0.207″ Wire Dia, 194.85 lb Max Load, 73.585 lb/in Spring Rate, Music Wire
• Compression Spring: 1.116″ OD, 2.5″ Free Length 0.177″ Wire Dia, 123.762 lb Max Load, 202.607 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M3 x 0.50, Metric Coarse, 2 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, ZrN Finish 0.625″ Thread Length, 1.9375″ OAL, Right Hand Flute, Right Hand Thread, D3, Series 892
• Press Fit Headless Drill Bushing: HM, 17″ ID Steel
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1; Length (yd): 20.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 46
• Press Fit Headless Drill Bushing: HM, 3.2″ ID Steel
• Compression Spring: 2.35″ OD, 4.25″ Free Length 220 lb Max Load, 109.442 lb/in Spring Rate, Music Wire
• Compression Spring: 2.409″ OD, 8″ Free Length 0.225″ Wire Dia, 160.409 lb Max Load, 36.627 lb/in Spring Rate, Music Wire
• 1/4″ Head Diam, 1/4″ Shank Diam, 1 Flute 120° High Speed Steel Countersink Oxide Finish, 2″ OAL, Double End, Straight Shank, Right Hand Cut
• Combo Drill & Countersink: Metric Bright (Polished) Finish
• Combo Drill & Countersink: #00, 1/8″ Body Dia, 118 ™, Solid Carbide AlTiN Finish, 1-1/2″ OAL, Right Hand Cut
• Kyocera RCMX 1003M0 CA5525 Grade CVD Carbide, 7 Degree, Round, Positive Rake Angle, Turning Insert for Light Interruption and Medium in (P) Carbon/Alloy Steel
• Jobber Length Drill Bit: 0.199″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.196″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.1935″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.065″ Dia, 0.098″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.045″ Dia, 0.068″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• 13/16″, 3/8″ Drive, Deep Hand Socket 12 Points, 2-3/4″ OAL, Chrome Finish
• Press Fit Headless Drill Bushing: HM, 6.2″ ID Steel
• Press Fit Headless Drill Bushing: HM, 7.2″ ID Steel
• Press Fit Headless Drill Bushing: HM, 7.4″ ID Steel
• Turning Insert: TNMG 16 04 08-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-PMC
• Press Fit Headless Drill Bushing: HM, 8.5″ ID Steel
• Press Fit Headless Drill Bushing: HM, 9.2″ ID Steel
• Turning Insert: TNMG 16 04 12-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Press Fit Headless Drill Bushing: HM, 10.2″ ID Steel
• Turning Insert: TNMG 16 04 08-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-MF (ISO P)
• Press Fit Headless Drill Bushing: HM, 10.5″ ID Steel
• Press Fit Headless Drill Bushing: HM, 11.5″ ID Steel
• Turning Insert: TNMG 16 04 12-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMG-MF (ISO P)
• Turning Insert: TNMG 16 04 16-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series TNMG-MF (ISO P)
• Turning Insert: TNMU 16 04 08-PF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMU-PF
• Turning Insert: TNMG 16 04 04-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TNMG-MF (ISO P)
• Turning Insert: TNMG 16 04 08-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Square End Mill: 5/32'' Dia, 5/16'' LOC, 3/16'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: TNMG 16 04 08-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Turning Insert: TNMG 16 04 12-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Compression Spring: 0.881″ OD, 1.375″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 174.812 lb/in Spring Rate, Music Wire
• Turning Insert: TNMG 16 04 08-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-PMC
• Compression Spring: 0.97″ OD, 4″ Free Length 0.085″ Wire Dia, 20.016 lb Max Load, 10.371 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 2.125″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 40.79 lb/in Spring Rate, Music Wire
• Adjustable Stop Replacement Roll
• Compression Spring: 1.058″ OD, 3.25″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 14.653 lb/in Spring Rate, Music Wire
• Adjustable Stop Replacement Roll
• Adjustable Stop Replacement Roll
• Compression Spring: 1.058″ OD, 2.625″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 22.934 lb/in Spring Rate, Music Wire
• Adjustable Stop Replacement Roll
• Milling Insert: RDHX1003M0SGN, KCKP10, Solid Carbide N/A Finish,
• Square End Mill: 0.035'' Dia, 0.052'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.055'' Dia, 0.165'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.045'' Dia, 0.135'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0523MC
• Square End Mill: 3/64'' Dia, 0.15'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.045'' Dia, 0.067'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.881″ OD, 2.625″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 24.675 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 3.5″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 13.671 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2.375″ Free Length 0.098″ Wire Dia, 41.442 lb Max Load, 34.797 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 2.5″ Free Length 0.095″ Wire Dia, 27.09 lb Max Load, 22.408 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.045'' Dia, 0.135'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.97″ OD, 1.5″ Free Length 0.12″ Wire Dia, 50.749 lb Max Load, 94.687 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 4″ Free Length 0.085″ Wire Dia, 24.795 lb Max Load, 9.798 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 2.625″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 25.146 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 1.75″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 64.859 lb/in Spring Rate, Music Wire
• DCGT32.51RFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1563″ Thick, 55° Included Angle, Series AC5000S
• DCGT32.51RFYS-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1563″ Thick, 55° Included Angle, Series AC5000S
• DCGT32.50.5RFYS Carbide Turning Insert Absotech Bronze Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0079″ Corner Radius, 0.1563″ Thick, 55° Included Angle, Series AC5000S
• DCGT32.50LFYS-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0039″ Corner Radius, 0.1563″ Thick, 55° Included Angle, Series AC5000S
• DCGT32.50RFYS-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0039″ Corner Radius, 0.1563″ Thick, 55° Included Angle, Series AC5000S