Products

• DCGT32.5.001RFYS Carbide Turning Insert Absotech Bronze Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0012″ Corner Radius, 0.1563″ Thick, 55° Included Angle, Series AC5000S
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9916; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Press Fit Headless Drill Bushing: P, 7/8″ ID, 1-1/8″ OD 1-3/4″ OAL, Carbon Steel
• Grooving Insert: GCM6030RN AC830P, Solid Carbide Super FF Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM6002GF AC520U, Solid Carbide Super ZX Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM6002GG AC520U, Solid Carbide Super ZX Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM6008MG AC520U, Solid Carbide Super ZX Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM6030RN AC520U, Solid Carbide Super ZX Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM6030RN AC425K, Solid Carbide Super FF Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM6250GG AC425K, Solid Carbide Super FF Finish, Neutral, 0.906″ Max Depth, Series GND
• Grooving Insert: GCM6250MG AC425K, Solid Carbide Super FF Finish, Neutral, 0.906″ Max Depth, Series GND
• Compression Spring: 0.881″ OD, 1.625″ Free Length 0.112″ Wire Dia, 59.862 lb Max Load, 90.032 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM6002GF AC530U, Solid Carbide Super ZX Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.112″ Wire Dia, 59.862 lb Max Load, 82.657 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM6030RN AC530U, Solid Carbide Super ZX Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Compression Spring: 0.999″ OD, 2.875″ Free Length 0.092″ Wire Dia, 30.897 lb Max Load, 18.227 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 2.375″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 28.031 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM6250RG AC830P, Solid Carbide Super FF Finish, Neutral, 0.906″ Max Depth, Series GND
• Compression Spring: 1.058″ OD, 3.75″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 9.647 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 2.875″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 16.695 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM6002GL AC520U, Solid Carbide Super ZX Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Compression Spring: 1.058″ OD, 2.375″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 25.565 lb/in Spring Rate, Music Wire
• Compression Spring: 2.35″ OD, 5.75″ Free Length 0.225″ Wire Dia, 164.229 lb Max Load, 52.754 lb/in Spring Rate, Music Wire
• O-Ring: 0.69″ ID x 1.03″ OD, 0.16″ Thick, Viton Round Cross Section
• Compression Spring: 1.351″ OD, 5.75″ Free Length 0.135″ Wire Dia, 50.962 lb Max Load, 18.24 lb/in Spring Rate, Stainless Steel
• Milling Insert: LNGU110416SRGEM, KCK20B, Solid Carbide N/A Finish, 0.2598″ OAW
• Compression Spring: 2.468″ OD, 5.75″ Free Length 0.225″ Wire Dia, 156.761 lb Max Load, 48.657 lb/in Spring Rate, Music Wire
• Milling Insert: LNGU110408SRGEM, KCK20B, Solid Carbide N/A Finish, 0.2598″ OAW
• Compression Spring: 2.526″ OD, 4.25″ Free Length 205.519 lb Max Load, 96.228 lb/in Spring Rate, Music Wire
• Milling Insert: LNGU110412SRGEM, KCK20B, Solid Carbide N/A Finish, 0.2598″ OAW
• Compression Spring: 1.41″ OD, 8″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 53.609 lb/in Spring Rate, Music Wire
• UNLU0603M0TR IN2030 Carbide Milling Insert TiAlN Finish
• Chucking Reamer: #19, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• LNGQ120612ELGEKT4 Carbide Milling Insert TiAlN/AlCrN Finish, 0.5118″ Long x 1/4″ Thick x 0.5222″ Wide
• Compression Spring: 1.058″ OD, 3.5″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 13.548 lb/in Spring Rate, Music Wire
• LNGQ120616ELGEKT4 Carbide Milling Insert TiN Finish, 0.5118″ Long x 1/4″ Thick x 0.5174″ Wide
• LNGQ120616ELGEKT4 Carbide Milling Insert TiAlN/AlCrN Finish, 0.5118″ Long x 1/4″ Thick x 0.5174″ Wide
• Torque Wrench Interchangeable Heads; Head Type: Mushroom; Size (Inch): 3/8; Additional Information: Overall Length: 33 mm; Dimensions: 33 mm L x 32 mm W x 32 mm H; Drive Connector Square (Male): 3/8-1/4 in; Width of Head: 47 mm; Diameter of head 1: 35 mm;
• LNGQ120620ELGEKT4 Carbide Milling Insert Al2O3 Finish, 0.5118″ Long x 1/4″ Thick x 0.5124″ Wide
• LNGQ120620ELGEKT4 Carbide Milling Insert TiAlN/AlCrN Finish, 0.5118″ Long x 1/4″ Thick x 0.5124″ Wide
• Chucking Reamer: #18, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• LNGQ120616ELGEKT4 Carbide Milling Insert Al2O3 Finish, 0.5118″ Long x 1/4″ Thick x 0.5174″ Wide
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, High Speed Steel, Bright Finish 1.6562″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series 0411
• O-Ring: 0.88″ ID x 1.38″ OD, 0.22″ Thick, Ethylene Propylene Diene Monomer with SS Screen Round Cross Section
• LNGQ120616ELGEKT4 Carbide Milling Insert AlTiN Finish, 0.5118″ Long x 1/4″ Thick x 0.5174″ Wide
• Spiral Flute Tap: #2-56, UNC, 2 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, TiCN Finish 0.438″ Thread Length, 1.75″ OAL, Right Hand Flute, Right Hand Thread, H2, Series 781
• Spiral Flute Tap: M2.50 x, 0.45, Metric Coarse, 2 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, Bright/Uncoated 0.5″ Thread Length, 1.8125″ OAL, Right Hand Flute, Right Hand Thread, D3, Series 716
• Chucking Reamer: 11/64" Dia, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• DCMT32.50.5ESU AC8015P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0079″ Corner Radius, 0.1563″ Thick, 55° Included Angle, Series AC8000P
• Glass Cloth Tape; Width (Inch): 1; Material Type: Glass Cloth; Color: White; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 7.0000; Tensile Strength (Lb./Inch): 180.00; Maximum Operating Temperature (F): 392.000
• Compression Spring: 0.881″ OD, 3.25″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 19.645 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.323″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Compression Spring: 0.881″ OD, 2.75″ Free Length 0.098″ Wire Dia, 41.442 lb Max Load, 29.688 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 4.75″ Free Length 349.474 lb Max Load, 308.355 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.5″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 157.331 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.4531″ Dia, 135 °, Cobalt AlTiN Finish, 5.625″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 0.999″ OD, 4.25″ Free Length 0.085″ Wire Dia, 24.795 lb Max Load, 9.197 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 2.875″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 20.794 lb/in Spring Rate, Music Wire
• Boring Bar: 0.152″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.002″ Corner Radius
• Boring Bar: 0.152″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.002″ Corner Radius
• Boring Bar: 0.152″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.002″ Corner Radius
• TNMG431-PM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 60° Trigon
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Boring Bar: 0.132″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• TNMG432-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Triangle
• TNMG433-QM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 60° Triangle
• Boring Bar: 0.152″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• Turning Insert: TNMG 22 04 12-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Boring Bar: 0.152″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• Turning Insert: TNMG 22 04 16-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series TNMG-MR (ISO P)
• TRI POS RAKE RH Carbide Milling Insert Megacoat Nano Finish, 5.7mm Thick
• Boring Bar: 0.152″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• Turning Insert: TNMG 22 04 16-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series TNMG-MR (ISO P)
• TRI POS RAKE RH Carbide Milling Insert TiCN/Al2O3/TiN Finish, 5.7mm Thick
• Boring Bar: 0.176″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Turning Insert: TNMG 22 04 08-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-MR (ISO P)
• TRI POS RAKE RH Carbide Milling Insert Megacoat Nano Finish, 5.7mm Thick
• Boring Bar: 0.176″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.176″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Turning Insert: TNMG 22 04 08-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-MF (ISO P)
• Kyocera TOMT 060504ERGM CA6535 Grade CVD Carbide, 60 Degree Triangle, Positive Rake Angle, Right-Hand Milling insert for Roughing in (M) Martensitic Stainless Steel
• Turning Insert: TNMG 22 04 12-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Kyocera TOMT 060504ERGM PR1510 Grade PVD Carbide, 60 Degree Triangle, Positive Rake Angle, Right-Hand Milling insert for Roughing in (K) Gray Cast Iron
• Kyocera TOMT 060504ERGM PR1525 Grade PVD Carbide, 60 Degree Triangle, Positive Rake Angle, Right-Hand Milling insert for Roughing in (P) Free-Cutting Steel
• Turning Insert: TNMG 22 04 24-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Kyocera TOMT 060504ERGM PR1535 Grade PVD Carbide, 60 Degree Triangle, Positive Rake Angle, Right-Hand Milling insert for Roughing in (M) Precipitation Hardened Stainless Steel and (P) Free-Cutting Steel
• Turning Insert: TNMG 22 04 12-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMG-MF (ISO P)
• Turning Insert: TNMG 22 04 08-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TNMG-MR (ISO P)
• Ball End Mill: 0.0354″ Dia, 0.0551″ LOC, 2 Flute, Solid Carbide 38 mm OAL, 3 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• WNGG080404AH PDL025 Carbide Turning Insert Diamond-Like Carbon (DLC) Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 80° Trigon
• Square End Mill: 0.057'' Dia, 0.086'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.528″ OD, 2.875″ Free Length 0.177″ Wire Dia, 92.973 lb Max Load, 86.338 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.053'' Dia, 0.08'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.058'' Dia, 0.087'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.043'' Dia, 0.065'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.043'' Dia, 0.129'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.053'' Dia, 0.159'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.044'' Dia, 0.132'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.057'' Dia, 0.171'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.038'' Dia, 0.114'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.027″ Dia, 0.081″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.026″ Dia, 0.078″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 0.049'' Dia, 0.147'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.053'' Dia, 0.159'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.059'' Dia, 0.089'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Square End Mill: 0.051'' Dia, 0.153'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.049'' Dia, 0.147'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Swivel Top Plate Caster: Rubber, 2-15/16″ Wheel Dia, 1-1/4″ Wheel Width, 209 lb Capacity, 3-13/16″ OAH 3.125″ Plate Length, 4.13″ Plate Width, Side Cam
• Square End Mill: 0.036'' Dia, 0.108'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.059'' Dia, 0.177'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Square End Mill: 0.043'' Dia, 0.129'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• LNGQ120608ELGEKT4 Carbide Milling Insert TiN Finish, 0.5118″ Long x 1/4″ Thick x 0.527″ Wide
• 3.05mm, 118° Drill Point, 3.05mm Shank Diam, Fast Spiral Circuit Board Drill Bit 16mm Flute Length, 38mm OAL, Series 300
• LNGQ120608ELGEKT4 Carbide Milling Insert Al2O3 Finish, 0.5118″ Long x 1/4″ Thick x 0.527″ Wide
• Screw Machine Length Drill Bit: 0.0748″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• LNGQ120608ELGEKT4 Carbide Milling Insert AlTiN Finish, 0.5118″ Long x 1/4″ Thick x 0.527″ Wide
• 0.65mm, 118° Drill Point, 0.65mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.5mm Flute Length, 38mm OAL, Series 300
• LNGQ120608ELGEKT4 Carbide Milling Insert TiAlN/AlCrN Finish, 0.5118″ Long x 1/4″ Thick x 0.527″ Wide
• Screw Machine Length Drill Bit: 0.0748″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Milling Insert: SDHW 1204AEEN H216T, H216T, Solid Carbide N/A Finish, 1.0000″ OAW
• Compression Spring: 1.351″ OD, 2.625″ Free Length 0.105″ Wire Dia, 33.439 lb Max Load, 20.217 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 2″ Free Length 0.207″ Wire Dia, 144.862 lb Max Load, 279.296 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 8.5″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 10.794 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.128″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Kyocera PNEG 1106XNTRT00515 KS6050 Grade Ceramic, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (K) Gray Cast Iron and (K) Nodular Cast Iron
• Compression Spring: 2.703″ OD, 6″ Free Length 0.225″ Wire Dia, 143.723 lb Max Load, 40.282 lb/in Spring Rate, Music Wire
• Compression Spring: 0.94″ OD, 1.5″ Free Length 0.125″ Wire Dia, 76.234 lb Max Load, 136.579 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 2.375″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 36.079 lb/in Spring Rate, Music Wire
• WBGT520.5LFX-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.126″ Long, 0.1563″ Inscribed Circle, 0.0079″ Corner Radius, 0.0626″ Thick, 80° Included Angle, Series AC5000S
• WBGT631RFX-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.1811″ Long, 0.1874″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick, 80° Included Angle, Series AC5000S
• WBGT520.5LFY-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.126″ Long, 0.1563″ Inscribed Circle, 0.0079″ Corner Radius, 0.0626″ Thick, 80° Included Angle, Series AC5000S
• WBGT521LFY-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.126″ Long, 0.1563″ Inscribed Circle, 0.0157″ Corner Radius, 0.0626″ Thick, 80° Included Angle, Series AC5000S
• Chamfer Mill: 0.05″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Chamfer Mill: 0.118″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Chamfer Mill: 0.06″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Ball End Mill: 0.1875″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: SCMT 09 T3 04-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series SCMT-PMC
• Turning Insert: CCMT 09 T3 08-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series CCMT-PMC
• Turning Insert: CCMT 09 T3 04-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series CCMT-PMC
• Milling Insert: SDHT 09T308FR-27P AMZ, AMZ, Solid Carbide N/A Finish,
• Milling Insert: SDHT 0903AEFN-27P AMZ, AMZ, Solid Carbide N/A Finish,
• Ball End Mill: 0.1875″ Dia, 0.375″ LOC, 3 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Jobber Length Drill Bit: 0.201″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Gray Double-Sided Foam Tape: 1″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Press Fit Headless Drill Bushing: P, 1-1/32″ ID, 1-3/8″ OD 1-3/4″ OAL, Carbon Steel
• Turning Insert: DCMT32.52CM T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Compression Spring: 1.586″ OD, 4.75″ Free Length 0.148″ Wire Dia, 55.936 lb Max Load, 23.821 lb/in Spring Rate, Stainless Steel
• Turning Insert: TPMT32.53PM T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0470″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMT
• Milling Insert: ONPX080620SNHB, KCK20B, Solid Carbide N/A Finish,
• Turning Insert: TPMR321-24 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMR
• Milling Insert: ONPX080608SNGP, KCK20B, Solid Carbide N/A Finish,
• Screw Machine Length Drill Bit: 0.3091″ Dia, 118 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 223
• Combo Drill & Countersink: 1/4, 1/4″ Body Dia, High Speed Steel TiCN Finish, 33/64″ Point Length, 2″ OAL, Right Hand Cut
• Combo Drill & Countersink: 1/4, 1/4″ Body Dia, High Speed Steel TiCN Finish, 17/32″ Point Length, 2″ OAL, Right Hand Cut
• Kyocera TPK 43PDFR KW10 Grade Uncoated Carbide, Triangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (N) Non-Ferrous Metals and (K) Gray Cast Iron, (S) Titanium Alloy
• Compression Spring: 0.881″ OD, 4.75″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 9.94 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 1.5″ Free Length 0.135″ Wire Dia, 94.111 lb Max Load, 180.03 lb/in Spring Rate, Music Wire
• Compression Spring: 1.01″ OD, 2″ Free Length 0.112″ Wire Dia, 39.705 lb Max Load, 46 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 4.75″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 7.54 lb/in Spring Rate, Music Wire
• Compression Spring: 1.016″ OD, 2″ Free Length 0.12″ Wire Dia, 66.332 lb Max Load, 73.16 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 3.75″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 12.598 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.875″ Free Length 0.105″ Wire Dia, 33.439 lb Max Load, 18.321 lb/in Spring Rate, Music Wire
• Compression Spring: 1.821″ OD, 7″ Free Length 0.207″ Wire Dia, 165.716 lb Max Load, 49.332 lb/in Spring Rate, Music Wire
• Turning Insert: VPGT110302MP-CF PR1535, Megacoat Nano Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond,
• Compression Spring: 0.97″ OD, 3.5″ Free Length 0.095″ Wire Dia, 27.09 lb Max Load, 15.619 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 2.25″ Free Length 0.112″ Wire Dia, 57.262 lb Max Load, 54 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 1.75″ Free Length 0.125″ Wire Dia, 77.458 lb Max Load, 115.17 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 1.625″ Free Length 0.125″ Wire Dia, 72.088 lb Max Load, 109.468 lb/in Spring Rate, Music Wire
• 5mm x 10' Silicone Round Cord Stock 450°F Max, Shore 70A, 850 psi Tensile Strength, Red
• Square End Mill: 1/8'' Dia, 1/4'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Open End Wrench: 13 mm x 15 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Compression Spring: 2.115″ OD, 5.75″ Free Length 0.225″ Wire Dia, 181.406 lb Max Load, 63.434 lb/in Spring Rate, Music Wire
• Grooving Insert: FMM4004 KW10, Solid Carbide Co & WC Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series KFMS
• Compression Spring: 0.999″ OD, 5.5″ Free Length 0.125″ Wire Dia, 55.049 lb Max Load, 24.931 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 4.75″ Free Length 0.148″ Wire Dia, 57.949 lb Max Load, 25.318 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.1181″ Dia, 0.2362″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 131.109 lb/in Spring Rate, Music Wire
• Press Fit Headless Drill Bushing: P, 1-1/8″ OD 1″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 27/32″ ID, 1-1/8″ OD 1/2″ OAL, Carbon Steel
• Compression Spring: 0.881″ OD, 3.75″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 16.89 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2.25″ Free Length 0.112″ Wire Dia, 59.862 lb Max Load, 62.258 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 2″ Free Length 0.12″ Wire Dia, 69.242 lb Max Load, 82 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 7.5″ Free Length 0.135″ Wire Dia, 62.105 lb Max Load, 14.125 lb/in Spring Rate, Music Wire
• Combo Drill & Countersink: #8, 3/4″ Body Dia, High Speed Steel Bright (Polished) Finish, 5/16″ Point Dia, 5/16″ Point Length, 3-1/2″ OAL, Right Hand Cut
• Clear Double-Sided Polyester Film Tape: 1″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1; Length (yd): 20.00; Thickness (mil): 2.3000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 46
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Jobber Length Drill Bit: 0.4219″ Dia, 135 °, Cobalt AlTiN Finish, 5.375″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 0.123'' Dia, 0.369'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.122'' Dia, 0.366'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 2.174″ OD, 5.75″ Free Length 0.225″ Wire Dia, 176.77 lb Max Load, 60.364 lb/in Spring Rate, Music Wire
• Square End Mill: 0.121'' Dia, 0.363'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.528″ OD, 5.75″ Free Length 0.225″ Wire Dia, 244.756 lb Max Load, 125.029 lb/in Spring Rate, Music Wire
• Square End Mill: 0.124'' Dia, 0.372'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.098'' Dia, 0.147'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mill: 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Square End Mill: 0.094'' Dia, 0.141'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.2559″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Square End Mill: 0.113'' Dia, 0.339'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 3/32'' Dia, 0.282'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.064'' Dia, 0.192'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.071'' Dia, 0.213'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.175″ OD, 1.875″ Free Length 0.207″ Wire Dia, 176.487 lb Max Load, 530.777 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.098'' Dia, 0.294'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Square End Mill: 0.084'' Dia, 0.252'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/16'' Dia, 0.189'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Kyocera TPG 221SET KBN525 Grade CBN, 11 Degree, Triangle, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Medium in (H) Hardened Materials
• Compression Spring: 1.175″ OD, 3.75″ Free Length 0.148″ Wire Dia, 74.095 lb Max Load, 52.966 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 2.5″ Free Length 0.105″ Wire Dia, 35.498 lb Max Load, 31.654 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 2.25″ Free Length 0.115″ Wire Dia, 45.305 lb Max Load, 49.147 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.058″ OD, 4.25″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 11.049 lb/in Spring Rate, Music Wire
• Spiral Point Tap: M10 x 1.25, Metric, 3 Flutes, Plug, 6H, High Speed Steel, Bright Finish 3/4″ Thread Length, 2-15/16″ OAL, Right Hand, D5, Series SPGP
• Compression Spring: 1.821″ OD, 4.5″ Free Length 278.606 lb Max Load, 172.458 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 2.625″ Free Length 0.112″ Wire Dia, 38.417 lb Max Load, 23.649 lb/in Spring Rate, Music Wire
• Compression Spring: 2.409″ OD, 9.5″ Free Length 0.192″ Wire Dia, 103.145 lb Max Load, 17.087 lb/in Spring Rate, Music Wire
• Square End Mill: 0.106'' Dia, 0.318'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Chucking Reamer: 0.0465″ Dia, 2-1/2″ OAL, 1/2″ Flute Length, Straight Shank, Cobalt 4 Flute
• Chucking Reamer: 0.041″ Dia, 2-1/2″ OAL, 1/2″ Flute Length, Straight Shank, Cobalt 4 Flute
• Press Fit Headless Drill Bushing: HM, 18″ ID Steel
• 415N-050212M-M30 1040 Cermet Milling Insert TiAlN Finish, 2.21mm Thick
• Compression Spring: 0.881″ OD, 2″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 112.379 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.126″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.1181″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.122″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.1″ Dia, 0.3″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.065″ Dia, 0.098″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: TPMR 16 03 04 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMR
• Turning Insert: TPMR 16 03 12 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TPMR
• Turning Insert: TPMR 16 03 08 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMR
• Turning Insert: TPMR 16 03 04-53 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMR-53
• Turning Insert: TPMR 16 03 08-53 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMR-53
• White Double-Sided Urethane Foam Tape: 1/4″ Wide, 5 yd Long, 250 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.055″ Dia, 0.165″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.06″ Dia, 0.18″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.88″ OD, 9.5″ Free Length 0.207″ Wire Dia, 160.849 lb Max Load, 34.453 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.88″ OD, 5.75″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 79.453 lb/in Spring Rate, Music Wire
• 12mm Inside Diam, Headless LM Drill Bushing Liner 18mm Body Outside Diam, 12mm Overall Liner Length
• 3/8″ Head Diam, 3/8″ Shank Diam, 4 Flute 120° High Speed Steel Countersink Bright Finish, 2-1/2″ OAL, Double End, Straight Shank, Right Hand Cut
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 283
• Turning Insert: KNMX16 04 10 R-71 4415, TiCN, Al2O3 & TiN Finish, Right Hand, 0.0394″ Corner Radius, N/A Series KNMX
• Compression Spring: 0.94″ OD, 5.5″ Free Length 0.085″ Wire Dia, 26.278 lb Max Load, 7.715 lb/in Spring Rate, Music Wire
• Turning Insert: KNMX16 04 10 L-71 4415, TiCN, Al2O3 & TiN Finish, Left Hand, 0.0394″ Corner Radius, N/A Series KNMX
• Turning Insert: KNMX16 04 05 L-71 4415, TiCN, Al2O3 & TiN Finish, Left Hand, 0.0197″ Corner Radius, N/A Series KNMX
• Compression Spring: 0.881″ OD, 4.25″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 14.813 lb/in Spring Rate, Music Wire