Products

• Compression Spring: 0.999″ OD, 3″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 27.997 lb/in Spring Rate, Music Wire
• Turning Insert: KNMX16 04 05 R-71 4415, TiCN, Al2O3 & TiN Finish, Right Hand, 0.0197″ Corner Radius, N/A Series KNMX
• Compression Spring: 1.058″ OD, 4.5″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 10.409 lb/in Spring Rate, Music Wire
• Turning Insert: KNMX16 04 05 R-71 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Right Hand, 0.0197″ Corner Radius, N/A Series KNMX
• Turning Insert: KNMX16 04 10 R-71 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Right Hand, 0.0394″ Corner Radius, N/A Series KNMX
• Turning Insert: KNMX16 04 10 L-71 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 0.0394″ Corner Radius, N/A Series KNMX
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 3/4; Length (yd): 20.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series:
• Turning Insert: KNMX16 04 05 L-71 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 0.0197″ Corner Radius, N/A Series KNMX
• Black Double-Sided Polyethylene Foam Tape: 2″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• DCGT2152LF KCS10B Carbide Turning Insert AlTiN Finish, 1/4″ Inscribed Circle, 1/32″ Corner Radius, 55° Diamond
• Spiral Point Tap: M2, Metric & DIN 371, 2 Flutes, Plug, 6H, HSS-E, TiN Finish 6 mm Thread Length, 45 mm OAL, Right Hand, Series TC216
• Ball End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Ball End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, Solid Carbide Uncoated
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Chamfer Mill: 0.039″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• #30, 118° Drill Point, 3.26mm Shank Diam, Fast Spiral Circuit Board Drill Bit 3/4″ Flute Length, 1-1/2″ OAL, Series 300
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 1.175″ OD, 4.75″ Free Length 0.135″ Wire Dia, 58.097 lb Max Load, 28.626 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• XCGT080304TA K10 Carbide Turning Insert 83.5° Included Angle
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: #17, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: OFPT06L5AFENGB, KCK20B, Solid Carbide N/A Finish,
• Compression Spring: 1.88″ OD, 4.5″ Free Length 270.619 lb Max Load, 160.631 lb/in Spring Rate, Music Wire
• Press Fit Headless Drill Bushing: HM, 10.2″ ID Steel
• Jobber Length Drill Bit: 0.161″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.159″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, Bright/Uncoated
• Screw Machine Length Drill Bit: 0.113″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• TPKR 32PPTR-HS IC328 Carbide Milling Insert TiCN Finish, 0.6496″ Long x 0.1378″ Thick
• VNMG330.5ESU-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.6535″ Long, 3/8″ Inscribed Circle, 0.0079″ Corner Radius, 0.1874″ Thick, 35° Included Angle, Series AC5000S
• Impact Socket: 3/4″ Drive 6-Point
• Impact Socket: 3/4″ Drive 6-Point
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 8.07; Load Capacity: 52 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 6.07; Extension F
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 8.07; Load Capacity: 52 lbs Capacity; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 6.07; Ex
• 10mm Inside Diam, Headless LM Drill Bushing Liner 15mm Body Outside Diam, 25mm Overall Liner Length
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 6.49; Load Capacity: 52 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 4.49; Extension Force: 5
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 6.49; Load Capacity: 52 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 4.49; Extension Force: 5
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 6.49; Load Capacity: 52 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 4.49; Extension Force: 5
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 6.49; Load Capacity: 52 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 4.49; Extension Force: 5
• Duct Tape: 1-1/2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 1-1/2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 1-1/2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 1-1/2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 1-1/2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 1-1/2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Film Tape: 48 mm Wide, 60 yd Long, 7.5 mil Thick, Black Polypropylene Film, Rubber Adhesive, 22 lb/in Tensile Strength
• Film Tape: 3/4″ Wide, 60 yd Long, 7.5 mil Thick, Black Polypropylene Film, Rubber Adhesive, 22 lb/in Tensile Strength
• Film Tape: 48 mm Wide, 60 yd Long, 7.5 mil Thick, Black Polypropylene Film, Rubber Adhesive, 22 lb/in Tensile Strength
• Milling Insert: LNPU110408SRGE, KCK20B, Solid Carbide N/A Finish, 0.2598″ OAW
• Compression Spring: 0.999″ OD, 2.625″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 41.222 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.4375″ Dia, 118 °, High Speed Steel Bright/Uncoated, 5.5″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.109″ Dia, 0.327″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.105″ Dia, 0.315″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.103″ Dia, 0.309″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.092″ Dia, 0.276″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.089″ Dia, 0.267″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.081″ Dia, 0.243″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.074″ Dia, 0.222″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.064″ Dia, 0.192″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.048″ Dia, 0.144″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.075″ Dia, 0.113″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: TPMT 11 03 04-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMT-PM
• Turning Insert: TPMT 11 03 08-PM 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMT-PM
• Turning Insert: TPMT 11 03 04-PM 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMT-PM
• Turning Insert: TPMT 11 03 04-PF 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Triangle, Series TPMT-PF
• Compression Spring: 0.97″ OD, 2.75″ Free Length 0.112″ Wire Dia, 42.212 lb Max Load, 35.819 lb/in Spring Rate, Stainless Steel
• Turning Insert: TPMT 11 03 08-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMT-PM
• Turning Insert: WPMT 04 02 04-PF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series WPMT-PF
• Compression Spring: 0.97″ OD, 2.5″ Free Length 0.115″ Wire Dia, 45.305 lb Max Load, 43.316 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.213″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: WPMT 04 02 08-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series WPMT-PM
• Compression Spring: 0.97″ OD, 2.5″ Free Length 0.12″ Wire Dia, 69.242 lb Max Load, 64 lb/in Spring Rate, Music Wire
• Turning Insert: WPMT 04 02 04-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series WPMT-PM
• Compression Spring: 0.999″ OD, 3.25″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 25.695 lb/in Spring Rate, Music Wire
• UHMW Film Tape: 1/2″ Wide, 5 yd Long, 20 mil Thick 145 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Turning Insert: TPMT 11 03 04-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Triangle, Series TPMT-PF
• Ball End Mill: 0.106″ Dia, 0.318″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.351″ OD, 6″ Free Length 0.135″ Wire Dia, 50.962 lb Max Load, 17.445 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.585″ OD, 4.5″ Free Length 201.076 lb Max Load, 86.707 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.054″ Dia, 0.162″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: EPGT4.51.8VL-W08 SH730, Solid Carbide TiAlN Finish, Left Hand, 0.0010″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Ball End Mill: 0.051″ Dia, 0.153″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.586″ OD, 4.75″ Free Length 315.419 lb Max Load, 225.829 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.046″ Dia, 0.138″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Point Tap: 9/16-18, UNF, 3 Flutes, Plug, 2B/3B, High Speed Steel, Steam Oxide Finish 1-21/32″ Thread Length, 3.5938″ OAL, Right Hand, H3, Series 751
• Ball End Mill: 0.073″ Dia, 0.219″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.056″ Dia, 0.168″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.087″ Dia, 0.261″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: EPGT520JS SH730, Solid Carbide TiAlN Finish, Neutral, 0.0040″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Turning Insert: CCGT3251M-FP2 WEP10C, Cermet, TiCN & TiAlN Finish, Neutral, 3/8″ Inscribed Circle, 80.0 &deg N/A Rhombic,
• Compression Spring: 0.999″ OD, 2.375″ Free Length 0.192″ Wire Dia, 167.453 lb Max Load, 430.278 lb/in Spring Rate, Stainless Steel
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 3.77; Overall Length (mm): 3.77; Material: Plastic; Projection: 1.3 in; Finish/Coating: Black Matte; Maximum Load Capacity: 3.00; Minimum Order Quantity: Plastic; Material: Pla
• Compression Spring: 1.351″ OD, 9.5″ Free Length 0.125″ Wire Dia, 41.475 lb Max Load, 8.358 lb/in Spring Rate, Stainless Steel
• Turning Insert: DNMG331FG PV3010, Cermet TiN Finish, Neutral, 0.4570″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Bottoming, 6H Class of Fit, High Speed Steel, TiCN Finish 0.75″ Thread Length, 2.125″ OAL, Right Hand Flute, Right Hand Thread, D4, Series SFGP
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Plug, 2B Class of Fit, High Speed Steel, TiN Finish 0.875″ Thread Length, 2.375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series SFGP
• OFMT 07T3-AEN IC328 Carbide Milling Insert TiCN Finish, 0.1705″ Thick x 0.7008″ Wide
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Plug, 6H Class of Fit, High Speed Steel, TiCN Finish 0.75″ Thread Length, 2.125″ OAL, Right Hand Flute, Right Hand Thread, D4, Series SFGP
• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, Plug, 6H Class of Fit, High Speed Steel, TiCN Finish 0.875″ Thread Length, 2.375″ OAL, Right Hand Flute, Right Hand Thread, D4, Series SFGP
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Steam Oxide Finish 0.46″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 799
• Compression Spring: 1.645″ OD, 6.5″ Free Length 0.135″ Wire Dia, 42.251 lb Max Load, 11.767 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.821″ OD, 3″ Free Length 0.177″ Wire Dia, 78.843 lb Max Load, 60.004 lb/in Spring Rate, Stainless Steel
• Milling Insert: SPHX1205ZCELGP, KCK20B, Solid Carbide N/A Finish,
• Milling Insert: SPHX1205ZCERGP, KCK20B, Solid Carbide N/A Finish,
• Milling Insert: SPHX1205PCERGP4SB, KCK20B, Solid Carbide N/A Finish,
• Milling Insert: SPHX1205PCERGPB, KCK20B, Solid Carbide N/A Finish,
• Compression Spring: 1.998″ OD, 4.5″ Free Length 255.902 lb Max Load, 140.974 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.125″ Free Length 0.207″ Wire Dia, 156.182 lb Max Load, 315.636 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.939″ OD, 3″ Free Length 0.177″ Wire Dia, 74.281 lb Max Load, 54.132 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.998″ OD, 4″ Free Length 0.162″ Wire Dia, 57.075 lb Max Load, 27.524 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.82″ OD, 6.25″ Free Length 0.225″ Wire Dia, 138.001 lb Max Load, 36.171 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 4.75″ Free Length 0.148″ Wire Dia, 62.518 lb Max Load, 29.048 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 5″ Free Length 349.474 lb Max Load, 291.224 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 4.75″ Free Length 0.148″ Wire Dia, 60.148 lb Max Load, 27.053 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 3.75″ Free Length 0.162″ Wire Dia, 76.412 lb Max Load, 48.965 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 7″ Free Length 0.207″ Wire Dia, 194.85 lb Max Load, 70.792 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/32″ Dia, 0.279″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Milling Insert: AH3135, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/32″ Dia, 0.279″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/32″ Dia, 0.279″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/64″ Dia, 15/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 0.186″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 0.186″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• CXMG 12T508-M3M IC6025 Carbide Turning Insert TiCN/Al2O3/TiN Finish, 0.539″ Long, 1/2″ Inscribed Circle, 0.8mm Corner Radius, 0.228″ Thick
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• CXMG 12T508-M3P IC8150 Carbide Turning Insert TiCN/Al2O3/TiCN/TiN Finish, 0.8mm Corner Radius, 5.79mm Thick
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.881″ OD, 1.625″ Free Length 0.148″ Wire Dia, 127.904 lb Max Load, 308.245 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.881″ OD, 4″ Free Length 0.098″ Wire Dia, 41.442 lb Max Load, 19.932 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/64″ Dia, 0.141″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.881″ OD, 1.875″ Free Length 0.135″ Wire Dia, 99.722 lb Max Load, 169.832 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 6.5″ Free Length 0.085″ Wire Dia, 24.795 lb Max Load, 5.928 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/32″ Dia, 3/32″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.999″ OD, 3″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 35.654 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/32″ Dia, 3/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.999″ OD, 1.75″ Free Length 0.135″ Wire Dia, 89.033 lb Max Load, 138.3 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.058″ OD, 6″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 5.924 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 6.75″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 5.249 lb/in Spring Rate, Music Wire
• 1/8″ Head Diam, 1/8″ Shank Diam, 82° Cobalt Countersink 1-1/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Grooving Insert: TDITT K10, Solid Carbide Uncoated, Neutral, 0.118″ Cutting Width, Series TDIT-E (Full Radius)
• Compression Spring: 1.41″ OD, 3.25″ Free Length 0.112″ Wire Dia, 38.417 lb Max Load, 18.764 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M4 x 0.70, Metric Coarse, 3 Flute, Modified Bottoming, 6H Class of Fit, Vanadium High Speed Steel, Hardslick Finish Right Hand Flute, Right Hand Thread, D4
• Corner Radius End Mill: 5/64″ Dia, 0.117″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/64″ Dia, 0.071″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.94″ OD, 2.75″ Free Length 0.112″ Wire Dia, 56.38 lb Max Load, 43.926 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.999″ OD, 5″ Free Length 0.092″ Wire Dia, 30.897 lb Max Load, 10.184 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 4.25″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 15.067 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 6.25″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 5.68 lb/in Spring Rate, Music Wire
• Square End Mill: 0.035'' Dia, 0.175'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 2.233″ OD, 6″ Free Length 0.225″ Wire Dia, 172.361 lb Max Load, 54.984 lb/in Spring Rate, Music Wire
• Compression Spring: 2.056″ OD, 8″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 48.355 lb/in Spring Rate, Music Wire
• Compression Spring: 2.585″ OD, 8″ Free Length 0.207″ Wire Dia, 118.89 lb Max Load, 23.794 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 8″ Free Length 36.876 lb Max Load, 8.157 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.645″ OD, 5″ Free Length 0.148″ Wire Dia, 54.026 lb Max Load, 21.28 lb/in Spring Rate, Stainless Steel
• Milling Insert: OFPT07L6AFENGB, KCK20B, Solid Carbide N/A Finish,
• White Double-Sided Foam Tape: 1″ Wide, 62 mil Thick, Acrylic Adhesive
• Chucking Reamer: #16, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Polyimide Film Tape: 1″ Wide, 5 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 356 ° F
• Compression Spring: 0.881″ OD, 5″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 12.506 lb/in Spring Rate, Music Wire
• Kyocera XPMT 15T304 PR1510 Grade PVD Carbide, Indexable Milling Insert, Parallelogram, Rake Angle, Neutral Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron
• Packaging Tape: 3″ Wide, 60 yd Long, 7.2 mil Thick, Brown Kraft Paper, Natural Synthetic Rubber Adhesive, 40 lb/in Tensile Strength
• XPMT15T324 PR1510 Carbide Milling Insert Megacoat Nano Finish, 0.6071″ Long x 0.1563″ Thick
• Open End Wrench: 19 mm x 22 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Compression Spring: 0.881″ OD, 6.25″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 7.488 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 4″ Free Length 0.105″ Wire Dia, 47.917 lb Max Load, 23.44 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.375″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 41.272 lb/in Spring Rate, Music Wire
• 0.55mm, 118° Drill Point, 0.55mm Shank Diam, Fast Spiral Circuit Board Drill Bit 9.5mm Flute Length, 38mm OAL, Series 300
• TPGX220.5L Cermet Turning Insert 0.008″ Corner Radius, 1/8″ Thick, 60° Triangle
• Milling Insert: SFHT 1204AFSR-F50 CTCP230, CTCP230, Solid Carbide N/A Finish, 1.0000″ OAW
• Screw Machine Length Drill Bit: 0.116″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Milling Insert: OFHT 050410SN-M50 CTPP235, CTPP235, Solid Carbide N/A Finish, 1.0000″ OAW
• Compression Spring: 0.999″ OD, 7.5″ Free Length 0.112″ Wire Dia, 41.068 lb Max Load, 11.829 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 2″ Free Length 0.135″ Wire Dia, 94.114 lb Max Load, 128 lb/in Spring Rate, Music Wire
• Turning Insert: TPGX730.5L CT3000, Cermet Uncoated Finish, Left Hand, 0.3790″ Long, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGX
• Polyethylene Film Tape: 1″ Wide, 1,000' x 3 mil Thick 3,800 Lb/In Tensile Strength, Water Based Acrylic Adhesive
• TPGX090204L CT3000 Cermet Turning Insert 60° Triangle
• Jobber Length Drill Bit: 0.2031″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Straight Flutes Tap: Metric Coarse, 4 Flutes, Bottoming, 6H, High Speed Steel, TiN Finish 1-1/4″ Thread Length, 2-15/16″ OAL, Right Hand, D6, Series 757
• Impact Socket: 1/4″ Drive 6-Point, 26 mm OAL
• Grooving Insert: TDTT TT7505, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDT-E
• Grooving Insert: TDTT TT9030, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width, Series TDT-E
• Grooving Insert: TDTT TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.118″ Cutting Width, Series TDT-E
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDT-E
• Grooving Insert: TDTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDT-E
• CCGT030102L-FF CT3000 Carbide Turning Insert 80° Diamond
• Square End Mill:
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Press Fit Headless Drill Bushing: HM, 5.5″ ID Steel
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Polyester Film Tape: 1″ Wide, 5 yd Long, 1.9 mil Thick 28 Lb/In Tensile Strength, Acrylic Adhesive, -60 to 300 ° F
• Compression Spring: 0.823″ OD, 5.75″ Free Length 0.125″ Wire Dia, 65.649 lb Max Load, 36.386 lb/in Spring Rate, Stainless Steel
• Press Fit Headed Drill Bushing: Type H, 23/64″ ID, 1″ OD
• Compression Spring: 1.88″ OD, 4″ Free Length 0.162″ Wire Dia, 60.499 lb Max Load, 30.159 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.468″ OD, 6.25″ Free Length 0.225″ Wire Dia, 156.761 lb Max Load, 44.462 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 5″ Free Length 337.338 lb Max Load, 260.413 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 6.5″ Free Length 0.135″ Wire Dia, 43.754 lb Max Load, 12.424 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.115″ OD, 6″ Free Length 0.225″ Wire Dia, 181.406 lb Max Load, 60.577 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.1772" Dia, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Compression Spring: 2.526″ OD, 8″ Free Length 0.207″ Wire Dia, 121.552 lb Max Load, 24.626 lb/in Spring Rate, Music Wire
• Compression Spring: 1.58″ OD, 2.5″ Free Length 0.207″ Wire Dia, 135.558 lb Max Load, 174.93 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.0748″ Dia, 0.2165″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0709″ Dia, 0.2165″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.2362″ Dia, 0.3937″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0591″ Dia, 0.1772″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0984″ Dia, 0.2953″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: APHT 100304FR-27P AMZ, AMZ, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.063″ Dia, 0.0945″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: APHT 100302FR-27P AMZ, AMZ, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0709″ Dia, 0.1063″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Screw Machine Length Drill Bit: 0.07″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Corner Radius End Mill: 0.0669″ Dia, 0.1969″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.063″ Dia, 0.1969″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: MH20-080425E-L30 S40T, S40T, Solid Carbide N/A Finish,
• Milling Insert: MH20-080425E-L30 S30T, S30T, Solid Carbide N/A Finish,
• Milling Insert: MH20-080425E-L30 1040, 1040, Solid Carbide N/A Finish,
• Ball End Mill: 0.125″ Dia, 0.5″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Single End
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 281
• Compression Spring: 0.823″ OD, 8.5″ Free Length 0.105″ Wire Dia, 41.357 lb Max Load, 11.787 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.82″ OD, 6.5″ Free Length 0.225″ Wire Dia, 138.001 lb Max Load, 34.676 lb/in Spring Rate, Music Wire
• Open End Wrench: 13 mm x 17 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Compression Spring: 0.999″ OD, 1.75″ Free Length 0.148″ Wire Dia, 114.443 lb Max Load, 206.509 lb/in Spring Rate, Music Wire
• Compression Spring: 1.88″ OD, 6″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 75.874 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 8″ Free Length 0.135″ Wire Dia, 48.941 lb Max Load, 12.258 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.1181″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2463
• Press Fit Headless Drill Bushing: HM, 8.25″ ID Steel
• Press Fit Headless Drill Bushing: HM, 8.8″ ID Steel