Products

• Screw Machine Length Drill Bit: 0.152″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Press Fit Headless Drill Bushing: HM, 9.8″ ID Steel
• Milling Insert: WKP35G, Solid Carbide N/A Finish, 1/8″ Insert Thick,
• Press Fit Headless Drill Bushing: HM, 4.25″ ID Steel
• Press Fit Headless Drill Bushing: HM, 4.9″ ID Steel
• Compression Spring: 1.058″ OD, 5″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 11.596 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.5938″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Straight Flutes Tap: Metric Fine, 4 Flutes, Taper, 6H, High Speed Steel, Bright/Uncoated 1-21/32″ Thread Length, Right Hand, D6, Series 755
• Grooving Insert: TDITT AB30, Ceramic Uncoated, Neutral, 0.157″ Cutting Width, Series TDIT-E CE
• Ball End Mill: 0.039″ Dia, 0.117″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: TDTT AB30, Ceramic Uncoated, Neutral, 0.157″ Cutting Width, Series TDT-E CE
• Compression Spring: 1.821″ OD, 6″ Free Length 0.225″ Wire Dia, 208.569 lb Max Load, 80.951 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.039″ Dia, 0.058″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 2.409″ OD, 6.25″ Free Length 0.225″ Wire Dia, 160.409 lb Max Load, 46.257 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.5″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 29.765 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 2.125″ Free Length 0.135″ Wire Dia, 89.033 lb Max Load, 110.341 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 5.75″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 8.071 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 4.5″ Free Length 0.105″ Wire Dia, 33.439 lb Max Load, 11.381 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 2.625″ Free Length 0.125″ Wire Dia, 52.147 lb Max Load, 34.536 lb/in Spring Rate, Music Wire
• Compression Spring: 0.705″ OD, 5.25″ Free Length 0.135″ Wire Dia, 91.644 lb Max Load, 85.613 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.705″ OD, 6″ Free Length 0.125″ Wire Dia, 75.178 lb Max Load, 51.518 lb/in Spring Rate, Stainless Steel
• O-Ring: 2″ ID x 2.63″ OD, 1/4″ Thick, Neoprene Round Cross Section, Black
• Compression Spring: 2.761″ OD, 6.5″ Free Length 0.225″ Wire Dia, 140.829 lb Max Load, 35.786 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 2.5″ Free Length 0.192″ Wire Dia, 114.994 lb Max Load, 141.262 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.94″ OD, 7″ Free Length 0.085″ Wire Dia, 26.278 lb Max Load, 6.021 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 3.5″ Free Length 0.112″ Wire Dia, 57.262 lb Max Load, 33 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.999″ OD, 6″ Free Length 0.092″ Wire Dia, 30.897 lb Max Load, 8.433 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.016″ OD, 3″ Free Length 0.12″ Wire Dia, 66.332 lb Max Load, 46.65 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.058″ OD, 7.5″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 4.711 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 4.25″ Free Length 0.105″ Wire Dia, 33.439 lb Max Load, 12.085 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.469″ OD, 2.5″ Free Length 50.145 lb Max Load, 34.251 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 5/64″ Dia, 15/64″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.586″ OD, 2.75″ Free Length 46.594 lb Max Load, 27.553 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/64″ Dia, 15/64″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6679; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Insert: GCM4002GF T2500A, Cermet Uncoated, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Chucking Reamer: #15, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Grooving Insert: GCM4004ML T2500A, Cermet Uncoated, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.97″ OD, 2.25″ Free Length 0.135″ Wire Dia, 94.117 lb Max Load, 111.84 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM4020RG T2500A, Cermet Uncoated, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Compression Spring: 0.999″ OD, 2″ Free Length 0.135″ Wire Dia, 89.033 lb Max Load, 118.314 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 0.186″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.41″ OD, 3.5″ Free Length 0.112″ Wire Dia, 38.417 lb Max Load, 17.332 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/64″ Dia, 0.141″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Ball End Mill: 0.0156″ Dia, 0.0313″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.035″ Dia, 0.105″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.035″ Dia, 0.105″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.03″ Dia, 0.09″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.03″ Dia, 0.09″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• #27, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.19mm Flute Length, 1-1/2″ OAL, Series 306
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• 3.7mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• #22, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.19mm Flute Length, 1-1/2″ OAL, Series 306
• Corner Radius End Mill: 3/32″ Dia, 9/64″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/32″ Dia, 9/64″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/32″ Dia, 9/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: DGLGL AH7025, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width, Series DGL
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• 4mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Duct Tape: 1″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Grooving Insert: GCM3002GF AC530U, Solid Carbide Super ZX Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Impact Socket: 1/2″ Drive 6-Point
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3015RN AC520U, Solid Carbide Super ZX Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM3002GF AC520U, Solid Carbide Super ZX Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3015RN AC830P, Solid Carbide Super FF Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3002GF AC830P, Solid Carbide Super FF Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3002CG AC830P, Solid Carbide Super FF Finish, Right Hand, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3002CG AC830P, Solid Carbide Super FF Finish, Left Hand, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM3002CG AC520U, Solid Carbide Super ZX Finish, Left Hand, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 5/64″ Dia, 0.117″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Milling Insert: KS05F, Solid Carbide N/A Finish,
• Grooving Insert: GCM3015RN AC425K, Solid Carbide Super FF Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Screw Machine Length Drill Bit: 0.3438″ Dia, 135 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 610
• Grooving Insert: GCM3002MG AC425K, Solid Carbide Super FF Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3002ML AC520U, Solid Carbide Super ZX Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3015RN AC530U, Solid Carbide Super ZX Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM3004MG AC520U, Solid Carbide Super ZX Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.058″ OD, 2.375″ Free Length 0.085″ Wire Dia, 18.42 lb Max Load, 13.619 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/64″ Dia, 0.071″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM3015RG AC520U, Solid Carbide Super ZX Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.823″ OD, 1.75″ Free Length 0.162″ Wire Dia, 141.646 lb Max Load, 531.832 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/32″ Dia, 3/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.999″ OD, 5.25″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 12.085 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/32″ Dia, 3/64″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 0.999″ OD, 1.875″ Free Length 0.148″ Wire Dia, 114.443 lb Max Load, 190.161 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.351″ OD, 4″ Free Length 0.112″ Wire Dia, 40.024 lb Max Load, 15.998 lb/in Spring Rate, Music Wire
• Grooving Insert: GCM3002CG AC520U, Solid Carbide Super ZX Finish, Right Hand, 3 mm Cutting Width, 20 mm Max Depth, Series GND
• Jobber Length Drill Bit: 0.0512″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Compression Spring: 1.528″ OD, 8.5″ Free Length 0.135″ Wire Dia, 59.818 lb Max Load, 11.639 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.375″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.3594″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: CCGT5.52.21JS SH730, Solid Carbide TiAlN Finish, Neutral, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Ball End Mill: 0.0156″ Dia, 0.0313″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Screw Machine Length Drill Bit: 0.1563″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, 2B/3B, High Speed Steel, Nitride/Steam Oxide Finish 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series 752
• Compression Spring: 0.999″ OD, 4.25″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 19.335 lb/in Spring Rate, Music Wire
• Chucking Reamer: 23/64″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Compression Spring: 1.351″ OD, 2.875″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 33.411 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 8″ Free Length 0.135″ Wire Dia, 67.237 lb Max Load, 15.135 lb/in Spring Rate, Music Wire
• Pneumatic Caster Wheel: Rubber, 10″ Dia, 3.5″ Wide 265 lb Capacity, Plain Bearing
• Compression Spring: 1.41″ OD, 2.25″ Free Length 0.135″ Wire Dia, 64.57 lb Max Load, 54.073 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 2.875″ Free Length 46.594 lb Max Load, 26.241 lb/in Spring Rate, Music Wire
• Square End Mill: 13/64'' Dia, 0.312'' LOC, 2.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.116″ OD, 9″ Free Length 0.192″ Wire Dia, 210.085 lb Max Load, 83.867 lb/in Spring Rate, Music Wire
• Grooving Insert: QI-NGGF H13A, Solid Carbide Neutral, 0.1252″ Cutting Width, Series CoroCut QI
• Jobber Length Drill Bit: 0.1039″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Grooving Insert: QI-NGGF H13A, Solid Carbide Neutral, 0.1181″ Cutting Width, Series CoroCut QI
• Compression Spring: 1.41″ OD, 6.25″ Free Length 0.225″ Wire Dia, 262.92 lb Max Load, 139.22 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.1098″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Glass Cloth Tape; Width (Inch): 1; Material Type: Aluminum; Glass Cloth; Color: Silver; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 6.8000; Tensile Strength (Lb./Inch): 100.00; Maximum Operating Temperature (F): 500.000
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Milling Insert: RNGN 120400TN-010D CTIS710, CTIS710, Ceramic N/A Finish, 1.0000″ OAW
• Compression Spring: 1.116″ OD, 3.25″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 101.237 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.0819″ Dia, 130 °, Powdered Metal FIREX Finish, 1.93″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Compression Spring: 2.409″ OD, 8″ Free Length 0.207″ Wire Dia, 127.196 lb Max Load, 26.471 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.111″ Dia, 130 °, Powdered Metal FIREX Finish, 2.4″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• SCGT431LF KCS10B Carbide Turning Insert AlTiN Finish, 1/2″ Inscribed Circle, 1/64″ Corner Radius, Square
• Jobber Length Drill Bit: 0.0783″ Dia, 130 °, Powdered Metal FIREX Finish, 1.93″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Milling Inserts; Insert Style: XRAA; Insert Size: 21005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XRAA; Coating/Finish: TiAlN; Widt
• Milling Inserts; Insert Style: XRAA; Insert Size: 21010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XRAA; Coating/Finish: TiAlN; Widt
• Jobber Length Drill Bit: 0.1695″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Milling Inserts; Insert Style: XRAA; Insert Size: 21020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XRAA; Coating/Finish: TiAlN; Widt
• Compression Spring: 2.291″ OD, 6.25″ Free Length 0.225″ Wire Dia, 168.233 lb Max Load, 50.331 lb/in Spring Rate, Music Wire
• Square End Mill: 15/64'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 2.703″ OD, 6.5″ Free Length 0.225″ Wire Dia, 143.723 lb Max Load, 36.953 lb/in Spring Rate, Music Wire
• Compression Spring: 1.645″ OD, 6.75″ Free Length 0.135″ Wire Dia, 42.251 lb Max Load, 11.313 lb/in Spring Rate, Stainless Steel
• Press Fit Headless Drill Bushing: P, 11/16″ ID, 1″ OD 2-1/8″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 15/16″ ID, 1-3/8″ OD 1/2″ OAL, Carbon Steel
• Press Fit Headed Drill Bushing: Type H, 5/8″ ID, 7/8″ OD
• Jobber Length Drill Bit: 0.315″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Press Fit Headless Drill Bushing: P, 31/32″ ID, 1-3/8″ OD 1″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 29/32″ ID, 1-3/8″ OD 1/2″ OAL, Carbon Steel
• Jobber Length Drill Bit: 0.1161″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Jobber Length Drill Bit: 0.0858″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Press Fit Headless Drill Bushing: P, 5/8″ ID, 1″ OD 2-1/8″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 63/64″ ID, 1-3/8″ OD 1″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 61/64″ ID, 1-3/8″ OD 1″ OAL, Carbon Steel
• Compression Spring: 0.881″ OD, 7.5″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 6.211 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 3″ Free Length 48.29 lb Max Load, 26.435 lb/in Spring Rate, Music Wire
• Press Fit Headless Drill Bushing: P, 31/32″ ID, 1-3/8″ OD 1/2″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 19/32″ ID, 7/8″ OD 2-1/8″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 13/16″ ID, 1-3/8″ OD 1″ OAL, Carbon Steel
• Boring Bar: 0.2″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.18″ Min Bore, 1-1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.2″ Min Bore, 0.9″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2-1/2″ OAL
• Square End Mill: 3/64'' Dia, 0.15'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.821″ OD, 4.75″ Free Length 278.606 lb Max Load, 162.313 lb/in Spring Rate, Music Wire
• Combo Drill & Countersink: #3, 1/4″ Body Dia, 118 ™, Cobalt Bright (Polished) Finish, 7/64″ Point Dia, 2″ OAL, Right Hand Cut
• Compression Spring: 2.409″ OD, 8.5″ Free Length 0.225″ Wire Dia, 160.409 lb Max Load, 34.286 lb/in Spring Rate, Music Wire
• Compression Spring: 2.82″ OD, 4.75″ Free Length 185.113 lb Max Load, 70.701 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.0138″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Compression Spring: 0.881″ OD, 4.25″ Free Length 0.105″ Wire Dia, 50.127 lb Max Load, 24.315 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 6″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 10.356 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 3″ Free Length 0.125″ Wire Dia, 77.458 lb Max Load, 62.82 lb/in Spring Rate, Music Wire
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Compression Spring: 0.999″ OD, 8″ Free Length 0.085″ Wire Dia, 24.795 lb Max Load, 4.792 lb/in Spring Rate, Music Wire
• Duct Tape: 3/4″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• O-Ring: 0.88″ ID x 1.38″ OD, 1/4″ Thick, Polytetrafluroethylene Envelope Nitrile Butadiene Rubber Round Cross Section
• 3.5' Tarp Clip with Ridged End White
• White Double-Sided Polyethylene Foam Tape: 2″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• Grooving Insert: GFF6 IC428, Solid Carbide Al2O3 & TiC Finish, Neutral, 0.2362″ Cutting Width, Series Self-Grip
• Compression Spring: 0.999″ OD, 2.5″ Free Length 0.192″ Wire Dia, 167.453 lb Max Load, 404.859 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: #5-44, UNF, 2 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, Bright/Uncoated 0.625″ Thread Length, 1.9375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 761
• Slip-Fixed Bushing: SF, 1″ Body OD Carbon Steel
• Compression Spring: 0.823″ OD, 1.875″ Free Length 0.162″ Wire Dia, 142.237 lb Max Load, 488.97 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 2″ Free Length 0.148″ Wire Dia, 88.181 lb Max Load, 157.937 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.116″ OD, 4″ Free Length 0.148″ Wire Dia, 77.685 lb Max Load, 55.009 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.1405″ Dia, 130 °, Cobalt TiN Finish, 2.7559″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 657
• Jobber Length Drill Bit: 0.375″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Jobber Length Drill Bit: 0.3937″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Ball End Mill: 0.041″ Dia, 0.123″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.037″ Dia, 0.111″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.469″ OD, 5″ Free Length 0.148″ Wire Dia, 60.148 lb Max Load, 25.615 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.035″ Dia, 0.105″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.031″ Dia, 0.093″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: TCMT32.52MT TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.6500″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TCMT
• Grooving Insert: TDTRU TT7505, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.079″ Cutting Width, Series TDT-RU (Full Radius)
• Turning Insert: TCMT32.51FG TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.6500″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TCMT
• Grooving Insert: TDXTT K10, Solid Carbide Uncoated, Neutral, 0.118″ Cutting Width, Series TDXT-E
• Turning Insert: TCMT32.52MT TT8020, Solid Carbide TiCN Finish, Neutral, 0.6500″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TCMT
• Grooving Insert: TDTRU TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.079″ Cutting Width, Series TDT-RU (Full Radius)
• Grooving Insert: TDTRU TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.079″ Cutting Width, Series TDT-RU (Full Radius)
• Turning Insert: CPGT090302L-W20 TH10, Solid Carbide Uncoated Finish, Left Hand, 80.0 &deg N/A Diamond, Series CPGT
• Chucking Reamer: #14, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Square End Mill: 3/16'' Dia, 1/2'' LOC, 3/8'' Shank Dia, 2-3/8'' OAL, 4 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 3/64'' Dia, 0.071'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: TDXUXU-Universal K10, Solid Carbide Uncoated, Neutral, 0.079″ Cutting Width, Series TDXU-E
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 3/8'' Shank Dia, 2-5/16'' OAL, 4 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: TDXUXU-Universal K10, Solid Carbide Uncoated, Neutral, 0.118″ Cutting Width, Series TDXU-E
• Turning Insert: VNGG330ML K10, Solid Carbide Uncoated Finish, Neutral, 0.6540″ Long, 3/8″ Inscribed Circle, 0.0040″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGG
• Spiral Point Tap: 5/16-18, UNC, 3 Flutes, Bottoming, 2B, High Speed Steel, Bright Finish 1-1/8″ Thread Length, 2-3/4″ OAL, Right Hand, H3, Series SPGP
• Compression Spring: 1.351″ OD, 7.5″ Free Length 0.207″ Wire Dia, 217.732 lb Max Load, 87.646 lb/in Spring Rate, Music Wire
• Grooving Insert: TDFTT K10, Solid Carbide Uncoated, Right Hand, 0.118″ Cutting Width, Series TDFT-E
• Compression Spring: 2.468″ OD, 4.75″ Free Length 210.08 lb Max Load, 88.425 lb/in Spring Rate, Music Wire
• Grooving Insert: TDFTT K10, Solid Carbide Uncoated, Left Hand, 0.118″ Cutting Width, Series TDFT-E
• Compression Spring: 2.291″ OD, 4.75″ Free Length 225.314 lb Max Load, 101.22 lb/in Spring Rate, Music Wire
• Milling Inserts
• Compression Spring: 1.351″ OD, 5.25″ Free Length 0.105″ Wire Dia, 33.439 lb Max Load, 9.687 lb/in Spring Rate, Music Wire
• Impact Socket: 1/2″ Drive 6-Point, 50 mm OAL
• Milling Inserts
• UHMW Film Tape: 3/4″ Wide, 5 yd Long, 10 mil Thick 80 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• O-Ring: 0.734″ ID x 1.012″ OD, 0.139″ Thick, Dash 210, Viton Round Cross Section
• Compression Spring: 2.056″ OD, 4.75″ Free Length 249.222 lb Max Load, 125.063 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M2.50 x, 0.45, Metric Coarse, 2 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, Steam Oxide Finish 0.5″ Thread Length, 1.8125″ OAL, Right Hand Flute, Right Hand Thread, D3, Series 717
• Milling Insert: LNGU15T608SRGEM, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• Polyester Film Tape: 1/8″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Spiral Flute Tap: #4-40, UNC, 2 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, Bright/Uncoated 0.5625″ Thread Length, 1.875″ OAL, Right Hand Flute, Right Hand Thread, H2, Series 761
• Compression Spring: 0.94″ OD, 4.75″ Free Length 0.105″ Wire Dia, 47.189 lb Max Load, 19.17 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.162″ Wire Dia, 163.038 lb Max Load, 437.114 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2.875″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 74.92 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 3.5″ Free Length 0.12″ Wire Dia, 50.749 lb Max Load, 36.652 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 4.5″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 18.208 lb/in Spring Rate, Music Wire
• Compression Spring: 1.016″ OD, 3.5″ Free Length 0.12″ Wire Dia, 66.332 lb Max Load, 39.5 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 8.5″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 4.146 lb/in Spring Rate, Music Wire