Products

• Compression Spring: 1.41″ OD, 3″ Free Length 0.125″ Wire Dia, 52.147 lb Max Load, 29.827 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 2.375″ Free Length 0.135″ Wire Dia, 64.57 lb Max Load, 50.862 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 2.375″ Free Length 0.135″ Wire Dia, 62.105 lb Max Load, 47.609 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 2.625″ Free Length 0.135″ Wire Dia, 57.728 lb Max Load, 37.798 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 25.056 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 3.5″ Free Length 0.12″ Wire Dia, 69.242 lb Max Load, 44 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 5.75″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 10.997 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 2.5″ Free Length 0.135″ Wire Dia, 89.033 lb Max Load, 91.786 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.5″ Free Length 0.135″ Wire Dia, 67.237 lb Max Load, 51.547 lb/in Spring Rate, Music Wire
• O-Ring: 0.88″ ID x 1.38″ OD, 0.22″ Thick, Ethylene Propylene Diene Monomer Round Cross Section
• Jobber Length Drill Bit: 0.386″ Dia, 118 °, High Speed Steel Bright/Uncoated, 5.125″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: CPMT 09 T3 08-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series CPMT-PM
• Compression Spring: 1.41″ OD, 2.5″ Free Length 0.135″ Wire Dia, 64.57 lb Max Load, 48.011 lb/in Spring Rate, Music Wire
• Turning Insert: CPMT 09 T3 04-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series CPMT-PM
• Compression Spring: 1.586″ OD, 3.25″ Free Length 46.594 lb Max Load, 22.961 lb/in Spring Rate, Music Wire
• Turning Insert: CPMT 09 T3 08-UM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series CPMT-UM
• Turning Insert: CPMT 09 T3 04-UM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series CPMT-UM
• Turning Insert: CPMT 09 T3 08-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Diamond 80 ™, Series CPMT-PF
• Turning Insert: CPMT 09 T3 04-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Diamond 80 ™, Series CPMT-PF
• White Double-Sided Urethane Foam Tape: 1/2″ Wide, 62.5 mil Thick, Acrylic Adhesive
• Milling Insert: SOHU 1204ABSR-F50 CTPM245, CTPM245, Solid Carbide N/A Finish, 1.0000″ OAW
• Compression Spring: 0.881″ OD, 1.375″ Free Length 0.092″ Wire Dia, 27.195 lb Max Load, 43.975 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.881″ OD, 1.875″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 23.219 lb/in Spring Rate, Stainless Steel
• TNMG432RT TT5100 Carbide Turning Insert 1/2″ Inscribed Circle, 1/32″ Corner Radius, 60° Triangle
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Compression Spring: 0.881″ OD, 1.5″ Free Length 0.092″ Wire Dia, 27.195 lb Max Load, 39.798 lb/in Spring Rate, Stainless Steel
• LNGQ120616ELGEKT4 Carbide Milling Insert TiAlCrN Finish, 0.5118″ Long x 1/4″ Thick x 0.5174″ Wide
• Press Fit Headed Drill Bushing: Type H, 17/64″ ID, 7/16″ OD 5/8″ Length Under Head, Steel
• LNGQ120620ELGEKT4 Carbide Milling Insert TiAlCrN Finish, 0.5118″ Long x 1/4″ Thick x 0.5124″ Wide
• LNGQ120620ELGEKT4 Carbide Milling Insert Al2O3 Finish, 0.5118″ Long x 1/4″ Thick x 0.5124″ Wide
• Grooving Insert: FTK4 CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 4 mm Cutting Width, 30 mm Max Depth, Series KFTB
• LNGQ120631ELGEKT4 Carbide Milling Insert TiAlCrN Finish, 0.5118″ Long x 1/4″ Thick x 0.4972″ Wide
• LNGQ120612ELGEKT4 Carbide Milling Insert Al2O3 Finish, 0.5118″ Long x 1/4″ Thick x 0.5222″ Wide
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Turning Insert: TNMG432RT TT7015, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.8660″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Jobber Length Drill Bit: 0.3051″ Dia, 118 °, High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute
• Jobber Length Drill Bit: 0.4688″ Dia, 135 °, Cobalt AlTiN Finish, 5.75″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: DNMX 15 04 12-WM 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Diamond 55 ™, Series DNMX-WM
• Turning Insert: DNMX 15 04 12-WM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Diamond 55 ™, Series DNMX-WM
• Turning Insert: DNMX 15 04 16-WM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Diamond 55 ™, Series DNMX-WM
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, 0.02″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Radius End Mill: 7/64″ Dia, 0.327″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.823″ OD, 2.75″ Free Length 0.135″ Wire Dia, 105.909 lb Max Load, 130.052 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 6.75″ Free Length 0.092″ Wire Dia, 34.8 lb Max Load, 9.173 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.078″ Dia, 0.234″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 0.881″ OD, 4.75″ Free Length 0.105″ Wire Dia, 50.127 lb Max Load, 21.638 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 9″ Free Length 0.085″ Wire Dia, 24.795 lb Max Load, 4.25 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.055″ Dia, 0.083″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Film Tape: 48 mm Wide, 60 yd Long, 7.5 mil Thick, Black Polypropylene Film, Rubber Adhesive, 22 lb/in Tensile Strength
• Compression Spring: 0.999″ OD, 2.625″ Free Length 0.135″ Wire Dia, 89.033 lb Max Load, 86.914 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.065″ Dia, 0.098″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: LNKX 0925 ZSR-R50 CTPP231, CTPP231, Solid Carbide N/A Finish,
• Milling Insert: LNKX 0925 ZER-M50 CTPM241, CTPM241, Solid Carbide N/A Finish,
• Compression Spring: 1.351″ OD, 3.25″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 29.234 lb/in Spring Rate, Music Wire
• Chamfer Mill: 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 3/32″ Dia, 9/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 0.062″ Dia, 0.187″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Kyocera DCMT 2152HQ CA5525 Grade CVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing-Medium in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: DNMG441ESU T1500Z, Cermet AlN Finish, Neutral, 0.6102″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series T1500Z
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.085″ Dia, 0.128″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.055″ Dia, 0.083″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.058″ OD, 9.5″ Free Length 0.085″ Wire Dia, 23.469 lb Max Load, 3.702 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.058″ OD, 7.5″ Free Length 0.092″ Wire Dia, 29.253 lb Max Load, 6.141 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.058″ OD, 6.25″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 9.202 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.109″ Dia, 0.164″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GFT0.0314 IC1028, Solid Carbide TiAlN & TiN Finish, Neutral, 0.0314″ Cutting Width, Series SlimGrip
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Polyimide Film Tape: 2″ Wide, 5 yd Long, 2.5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, -40 to 500 ° F
• Corner Radius End Mill: 0.046″ Dia, 0.138″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.586″ OD, 2.75″ Free Length 0.135″ Wire Dia, 57.728 lb Max Load, 35.893 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.036″ Dia, 0.108″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.043″ Dia, 0.129″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Square End Mill: 3/32'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• FFT3 WXMT030206T IC830 Carbide Milling Insert TiAlN/AlTiN/TiN Finish, 9.05mm Thick
• Engraving Cutter: 300 °, 1/8″ Dia, 0.01″ Tip Dia, Tipped Off Point, Solid Carbide AlTiN Finish, 0.215″ LOC, 1/8″ Shank, 2″ OAL, 1 Flute, Use on Ferrous & Non-Ferrous Metals
• Ball End Mill: 0.0354″ Dia, 0.1063″ LOC, 2 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Combo Drill & Countersink: #4, 5/16″ Body Dia, High Speed Steel Bright (Polished) Finish, 1/8″ Point Dia, 1/8″ Point Length, 5″ OAL, Right Hand Cut
• Combo Drill & Countersink:118 ™, Solid Carbide Bright/Uncoated Finish, Right Hand Cut, Series Combined Drill & Countersinks
• Engraving Cutter: 600 °, 0.005″ Dia, Tipped Off Point AlTiN Finish, 0.104″ LOC, 1″ Shank, 1-1/2″ OAL, 1 Flute
• Spiral Point Tap: #6-40, UNF & DIN 371, 3 Flutes, Plug, 2B, HSS-E, TiN Finish 11 mm Thread Length, 55 mm OAL, Right Hand, Series TC216
• All-Purpose & Utility Hooks; Overall Length (Inch): 7/8; Finish/Coating: Black; Maximum Load Capacity: 22.00; Width (Inch): 1-23/32; Additional Information: Projection: 19.6 mm; Application: Undermount; Distance Between Mounting Holes: 30 mm; Minimum Orde
• Square End Mill: 3/8'' Dia, 3/4'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 5/16'' Dia, 3/4'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/4'' Dia, 5/8'' LOC, 3/8'' Shank Dia, 2-7/16'' OAL, 4 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Milling Inserts; Insert Style: XB1A; Insert Size: 020; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 3/32; Length (Inch): 5/16; Thickness (Inch): 3/32; Series: XB1A; Coating/Finish: TiAlN
• Milling Inserts; Insert Style: XRAA; Insert Size: 08005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.0000 to 0.1000; Length Range (Decimal Inch): 0.0000 to 0.3200; Series: XRAA; Coating/Finish: TiAlN; Widt
• Milling Inserts; Insert Style: XRAA; Insert Size: 08003; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.0000 to 0.1000; Length Range (Decimal Inch): 0.0000 to 0.3200; Series: XRAA; Coating/Finish: TiAlN; Widt
• Milling Inserts; Insert Style: XR1A; Insert Size: 02002; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 3/32; Length (Inch): 5/16; Thickness (Inch): 3/32; Series: XR1A; Coating/Finish: TiAlN
• Milling Inserts; Insert Style: XR1A; Insert Size: 02001; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 3/32; Length (Inch): 5/16; Thickness (Inch): 3/32; Series: XR1A; Coating/Finish: TiAlN
• Milling Inserts; Insert Style: XR2A; Insert Size: 02001; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 3/32; Length (Inch): 5/16; Thickness (Inch): 3/32; Series: XR2A; Coating/Finish: H-Coating
• Milling Inserts; Insert Style: XB1N; Insert Size: 080; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.0000 to 0.1000; Length Range (Decimal Inch): 0.0000 to 0.3200; Series: XB1N; Coating/Finish: TiAlN; Width
• Milling Inserts; Insert Style: XRAA; Insert Size: 08010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.0000 to 0.1000; Length Range (Decimal Inch): 0.0000 to 0.3200; Series: XRAA; Coating/Finish: TiAlN; Widt
• Chucking Reamer: #13, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Milling Inserts; Insert Style: XB2C; Insert Size: 020; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 3/32; Length (Inch): 5/16; Thickness (Inch): 3/32; Series: XB2C; Coating/Finish: H-Coating
• Milling Inserts; Insert Style: XR2A; Insert Size: 02002; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 3/32; Length (Inch): 5/16; Thickness (Inch): 3/32; Series: XR2A; Coating/Finish: H-Coating
• Jobber Length Drill Bit: 0.252″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Brackets; Type: Angle Bracket; Length (mm): 40.00; Width (mm): 25.00; Height (mm): 40.0000; Load Capacity (Lb.): 18.000; Finish/Coating: Satin; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• Compression Spring: 0.823″ OD, 2.125″ Free Length 0.162″ Wire Dia, 143.171 lb Max Load, 421.095 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 3.75″ Free Length 46.594 lb Max Load, 19.681 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.1563″ Dia, 0.3125″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Milling Insert: WHH15X, Solid Carbide N/A Finish,
• Ball End Mill: 0.1563″ Dia, 0.3125″ LOC, 3 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Compression Spring: 0.97″ OD, 2″ Free Length 0.162″ Wire Dia, 156.541 lb Max Load, 291.3 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 3.25″ Free Length 0.125″ Wire Dia, 72.088 lb Max Load, 50.173 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 6.75″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 8.5 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.25″ Free Length 0.148″ Wire Dia, 86.714 lb Max Load, 82.214 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 2.75″ Free Length 0.135″ Wire Dia, 64.57 lb Max Load, 43.171 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 9″ Free Length 0.135″ Wire Dia, 62.105 lb Max Load, 11.66 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 2.25″ Free Length 0.148″ Wire Dia, 80.145 lb Max Load, 70.915 lb/in Spring Rate, Music Wire
• Combo Drill & Countersink: #13, 1/4″ Body Dia, High Speed Steel Bright (Polished) Finish, 3/32″ Point Dia, 2″ OAL, Right Hand Cut, Series 595
• Milling Insert: AH725, Solid Carbide N/A Finish,
• Milling Insert: AH725, Solid Carbide N/A Finish,
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Milling Insert: AH3135, Solid Carbide N/A Finish,
• Milling Insert: AH120, Solid Carbide N/A Finish,
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 1.82; Overall Length (mm): 1.82; Material: Foam; Projection: 0.5 in; Finish/Coating: Plastic; Minimum Order Quantity: Foam; Material: Foam; Length (Inch): 1.82; Overall Length:
• Compression Spring: 0.823″ OD, 2.375″ Free Length 0.148″ Wire Dia, 135.637 lb Max Load, 236.398 lb/in Spring Rate, Music Wire
• 3/8″ Head Diam, 1/4″ Shank Diam, 6 Flute 100° High Speed Steel Countersink Oxide Finish, 2″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 0.94″ OD, 1.75″ Free Length 0.177″ Wire Dia, 163.106 lb Max Load, 567.52 lb/in Spring Rate, Music Wire
• 3/8″ Head Diam, 1/4″ Shank Diam, 6 Flute 90° High Speed Steel Countersink Oxide Finish, 2″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 0.97″ OD, 4″ Free Length 0.115″ Wire Dia, 45.305 lb Max Load, 26.656 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 4.5″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 23.146 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 5.25″ Free Length 0.112″ Wire Dia, 38.417 lb Max Load, 11.297 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 3.5″ Free Length 50.145 lb Max Load, 23.712 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 2.875″ Free Length 0.135″ Wire Dia, 57.728 lb Max Load, 34.171 lb/in Spring Rate, Music Wire
• Straight Flutes Tap: 1/2-20, UNF, 4 Flutes, Taper, 2B & 3B, High Speed Steel, TiN Finish 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series 729
• Corner Radius End Mill: 0.0394″ Dia, 0.1575″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headless Drill Bushing: P, 17/32″ ID, 3/4″ OD 2-1/8″ OAL, Carbon Steel
• Corner Radius End Mill: 0.0787″ Dia, 0.1969″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0394″ Dia, 0.1575″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: RPNX 10T3M4SN-F50 CTCM245, CTCM245, Solid Carbide N/A Finish,
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.092″ Wire Dia, 27.195 lb Max Load, 33.445 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 5.5″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 14.766 lb/in Spring Rate, Music Wire
• Compression Spring: 1.058″ OD, 2.125″ Free Length 0.085″ Wire Dia, 18.42 lb Max Load, 15.361 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 5.25″ Free Length 0.112″ Wire Dia, 40.024 lb Max Load, 12.019 lb/in Spring Rate, Music Wire
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6973; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.645″ OD, 2.875″ Free Length 0.135″ Wire Dia, 55.744 lb Max Load, 32.362 lb/in Spring Rate, Music Wire
• Socket Extension Sets; Finish: Chrome; Material: Steel; Insulated: No; Non-sparking: No; Tether Style: Not Tether Capable
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #000; Inner Diameter (Decimal Inch): 0.0489; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Grooving Insert: TDTT K10, Solid Carbide Uncoated, Neutral, 0.118″ Cutting Width, Series TDT-E
• Milling Insert: SDHT 0903AESN-M31 CTC5240, CTC5240, Solid Carbide N/A Finish,
• Milling Insert: SFHT 0903AFSR-F50 CTCM245, CTCM245, Solid Carbide N/A Finish,
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Milling Insert: SDHT 0903AESN-F50 CTCS245, CTCS245, Solid Carbide N/A Finish,
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Compression Spring: 0.999″ OD, 8″ Free Length 0.092″ Wire Dia, 30.897 lb Max Load, 6.275 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 6.75″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 9.32 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 9.5″ Free Length 0.135″ Wire Dia, 57.728 lb Max Load, 9.787 lb/in Spring Rate, Music Wire
• Turning Insert: CNMG433EN-M30 CTPM125, Solid Carbide TiAlTaN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Impact Socket: 3/4″ Drive 6-Point
• Impact Socket: 3/4″ Drive 6-Point
• Impact Socket: 3/4″ Drive 6-Point
• Impact Socket: 3/4″ Drive 6-Point
• Compression Spring: 0.881″ OD, 2.25″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 19.033 lb/in Spring Rate, Stainless Steel
• Press Fit Headed Drill Bushing: Type H, #34 ID, 1/4″ OD
• Press Fit Headed Drill Bushing: Type H, 9/64″ ID, 1/4″ OD
• Compression Spring: 0.999″ OD, 4.75″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 21.868 lb/in Spring Rate, Music Wire
• Clear Double-Sided Polyester Film Tape: 2″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Compression Spring: 1.058″ OD, 7″ Free Length 0.098″ Wire Dia, 34.867 lb Max Load, 8.187 lb/in Spring Rate, Music Wire
• Polyethylene Film Tape: 6″ Wide, 25' x 2 mil Thick 2,500 Lb/In Tensile Strength, Acrylic Adhesive
• Milling Insert: RDPX1604M0SHN, KCKP10, Solid Carbide N/A Finish,
• Polytetrafluroethylene Film Tape: 1″ Wide, 5 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Turning Insert: TPMR322 KCP25C, Carbide
• Turning Insert: TPMR321 KCP25C, Carbide
• Turning Insert: KRR658680 KCP25C, Carbide
• Compression Spring: 1.351″ OD, 1.875″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 145.923 lb/in Spring Rate, Music Wire
• Turning Insert: TPG322 KCP25C, Carbide
• Compression Spring: 1.645″ OD, 7.5″ Free Length 0.148″ Wire Dia, 71.988 lb Max Load, 16.315 lb/in Spring Rate, Music Wire
• Turning Insert: NP-CNGA433-GA2 BC8130, Cubic Boron Nitride (CBN)
• Turning Insert: CCMT433LF KCP25C, Carbide
• Turning Insert: TCMT432FP KCP25C, Carbide
• Turning Insert: NPCNGA433-FSWS4 MB8110, Cubic Boron Nitride (CBN)
• Turning Insert: NPCNGA433-FSWS2 MB8110, Cubic Boron Nitride (CBN)
• Ball End Mill: 0.0938″ Dia, 0.1875″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Double End
• Turning Insert: NPCNGA433-FSWS2 BC8105, Cubic Boron Nitride (CBN)
• Turning Insert: TPMT2152MP KCP25C, Carbide
• Turning Insert: TPMT18152FP KCP25C, Carbide
• Press Fit Headless Drill Bushing: HM, 9.4″ ID Steel
• Turning Insert: NP-CNGA433-FS4 MB8110, Cubic Boron Nitride (CBN)
• Press Fit Headless Drill Bushing: HM, 4″ ID Steel
• Turning Insert: NP-CNGA433-FS2 MB8110, Cubic Boron Nitride (CBN)
• Press Fit Headless Drill Bushing: HM, 5″ ID Steel
• Square End Mill:
• Chucking Reamer: 0.1865" Dia, 4-1/2" OAL, 1-1/8" Flute Length, Straight-Cylindrical Shank, HSS
• Ball End Mill: 16.00 mm Dia, 30.00 mm LOC, 2 Flute, Solid Carbide
• Compression Spring: 0.881″ OD, 6.5″ Free Length 0.098″ Wire Dia, 41.442 lb Max Load, 12.028 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.875″ Free Length 0.105″ Wire Dia, 25.906 lb Max Load, 15.931 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 2.375″ Free Length 0.148″ Wire Dia, 80.145 lb Max Load, 66.651 lb/in Spring Rate, Music Wire
• Milling Insert: WK10, Solid Carbide N/A Finish,
• TEFC AC Motor: C-Face Mount & TEFC Enclosure
• Milling Insert: WXN15, Solid Carbide N/A Finish,
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Grooving Insert: GCM20003CF AC1030U, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002GL AC5025S, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2094GG AC5025S, Solid Carbide Absotech Finish, Neutral, 0.094″ Cutting Width, 0.709″ Max Depth, Series GND
• Grooving Insert: GCM2002CG AC8025P, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002CG AC8025P, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND