Products

• Grooving Insert: GCM2002GG AC8025P, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2004GF AC5015S, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2004GL AC5015S, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002ML AC5015S, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002CG AC8035P, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002CG AC8035P, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002GG AC8035P, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2004GL AC8035P, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002GL AC8035P, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM20003CF AC5015S, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM20003CF AC5015S, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002GL AC5015S, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM20003CF AC5015S, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM20003CF AC5015S, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002GG AC5015S, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002GF AC5015S, Solid Carbide Absotech Finish, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002CG AC5015S, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002CG AC5015S, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM4002CG AC8035P, Solid Carbide Absotech Finish, Left Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM20003CF AC5025S, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM20003CF AC5025S, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM20003CF AC5025S, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6532; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0336; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Insert: GCM2002CG AC5025S, Solid Carbide Absotech Finish, Left Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Grooving Insert: GCM2002CG AC5025S, Solid Carbide Absotech Finish, Right Hand, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9565; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0118; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plastic Rod: 48" Long, 0.3120" Dia, Black, Opaque, 5000 - 1000 psi Tensile Strength
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9432; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9698; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Double Acting Rodless Air Cylinder: 4" Bore, 1" Stroke, 250 psi Max, 1/2 NPTF Port, Side Tapped Mount
• 321 Stainless Steel Round Rod: 2-1/4" Dia, 3' Long
• Encapsulated Suits: 3X-Large, Orange, Multi-Layer Non-Woven Barrier Laminate Fabric, N/AClosure, Taped & Welt, Yes
• M42 CLAW Fleam Ground Hole Saw
• Turning Insert: NP-CNGA433-TH4 MB8130, Cubic Boron Nitride (CBN)
• Profile Boring Bar: 0.36" Min Bore, 1-1/4" Max Depth, Right Hand Cut, Solid Carbide
• Turning Insert: NP-DNGA431-TA4 MB8120, Cubic Boron Nitride (CBN)
• Machine Tool Arbors & Arbor Adapters; Product Type: Slitting & Slotting Saw Arbor; Shank Type: Weldon Flat
• Annular Cutter: 2" Cutting Depth, High Speed Steel
• Machine Tool Arbors & Arbor Adapters; Product Type: Slitting & Slotting Saw Arbor; Shank Type: Weldon Flat
• Turning Insert: NP-DNGA332-GA2 BC8220, Cubic Boron Nitride (CBN)
• Screwdriver Accessories; Type: Hex Bit Holder
• Deep Standard Socket Set Socket Set: 30 Pc, 10 to 24" Socket
• Machine Tool Arbors & Arbor Adapters; Product Type: Slitting & Slotting Saw Arbor; Shank Type: Straight
• Machine Tool Arbors & Arbor Adapters; Product Type: Slitting & Slotting Saw Arbor; Shank Type: Weldon Flat
• Machine Tool Arbors & Arbor Adapters; Product Type: Slitting & Slotting Saw Arbor; Shank Type: Weldon Flat
• Machine Tool Arbors & Arbor Adapters; Product Type: Slitting & Slotting Saw Arbor; Shank Type: Weldon Flat
• Indexable High-Feed End Mill: 20 mm Cut Dia, 20 mm Cylindrical Shank
• Clamps For Indexables; Clamp Type: Insert Clamp; Industry Standard Number: AD-WL-4/3-SET; Toolholder Style Compatibility: PWLN; Cutting Direction: Neutral
• Indexable High-Feed End Mill: 1" Cut Dia, Cylindrical Shank
• Ball End Mill: 1.60 mm Dia, 1.20 mm LOC, 2 Flute, Solid Carbide
• Indexable High-Feed End Mill: 25 mm Cut Dia, 25 mm Cylindrical Shank
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4911; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Beam Torque Wrench: 3/8" Drive, Square Drive, Foot Pound
• Nutdriver Sets; Drive Size: 7 mm, 8 mm, 1/4 in, 10 mm, 3/8 in, 5/16 in; Handle Type: Ergonomic Cushion Grip; Shaft Type: 1 in Hollow; Container Type: Box; Shaft Length (Inch): 3; Overall Length (Decimal Inch): 7.7000
• Deep Standard Socket Set Socket Set: 22 Pc, 0.375 to 1" Socket
• Socket Adapters & Universal Joints; Adapter Type: Hex Bit Holder; Male Size: 1/4 in; Male Drive Style: Square; Overall Length (Inch): 1.2
• Panel Meters; Panel Meter Type: Panel Meter; Power Measurement Type: DC Voltmeter; Panel Meter Display Type: Digital LCD; Maximum Input Voltage: 7
• Indexable High-Feed End Mill: 1" Cut Dia, Cylindrical Shank
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7603; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Insert: GBA 43 GM, PR2015, Carbide
• Grooving Insert: GBA 43 GM, PR2015, Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6664; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Lever Locksets; Lockset Type: Electrified Cylindrical Lock ; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: SFIC Less Core; Material: Cold Rolled Steel; Door Thickness: 1-3/4 to 2; Finish: Satin Chrome
• Lever Locksets; Lockset Type: Residentail Passage Cylindrical Lever; Key Type: Keyless; Back Set: 2-3/8; Cylinder Type: Keyless; Material: Zinc; Door Thickness: 1 3/8 - 1 3/4; Finish: Matte Black
• Vertical Bars; Type: Surface Vertical Rod Exit Device; Rating: Panic Rated; Hand: Left Hand Reverse; Minimum Door Width: 36; Maximum Door Width: 48.000; Grade: 1; Material: Stainless Steel
• Lever Locksets; Lockset Type: Cylindrical Half Dummy Lever ; Key Type: Keyless; Back Set: 2-3/8; Cylinder Type: Keyless; Material: Zinc; Door Thickness: 1 3/8 to 1 3/4; Finish: Iron Black
• Lever Locksets; Lockset Type: Grade 1 Passage Cylindrical Lock ; Key Type: Keyless; Back Set: 2-3/4; Cylinder Type: Keyless; Material: Brass; Door Thickness: 1-3/4 to 2; Finish: Satin Chrome
• WiFi Gateway Plastic
• Electric Strikes; Product Type: Electric Door Strike; Type: Fail Safe/Fail Secure; Length (Inch): 4.88; Power Type: Electric; Width (Inch): 1; Strike Material: Stainless Steel; Door Frame Material: Hollow Metal & Wood; Finish/Coating: Dark Bronze; Facepla
• Woodruff Keyseat Cutter: 1-3/8" Cut Dia, 1/4" Cut Width, 1/2" Shank Dia, Staggered Tooth
• Turning Insert: CCET21.5V3LSR HTI10, Carbide
• Ball End Mill: 1/8" Dia, 1/8" LOC, 2 Flute, Solid Carbide
• Milling Insert: APMT250608ER-NB4 PR1810, Carbide
• Tweezers; Tweezer Type: Utility; Pattern: Serrated Blunt Tip; Material: Stainless Steel; Tip Type: Blunt; Tip Shape: Pointed; Overall Length (Inch): 4-3/4; Grip Style: Smooth
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6659; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8151; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Selector Switch Accessories; Switch Accessory Type: Handle; For Use With: Harmony XB5 Flush Mounted Illuminated Selector Switch; Switch Style: Handle; Color: Red
• Time Cards & Time Clock Accessories; Type: Replacement Ribbon; For Use With: Acroprint Time Recorder - Manual or Automatic Time Recorders
• Torque Wrench Accessories; Accessory Type: Torque Multiplier Display Wrench; For Use With: Torque Multiplier; Overall Length: 1.38; Overall Height: 1.38 in; Insulated: No
• Corner Chamfer End Mill: 4.50 mm Dia, 8.00 mm LOC, 3 Flute, 0.15 mm Chamfer Width, Solid Carbide
• Time Clocks & Time Recorders; Power Source: 115 VAC; Display Type: Dial; Registration Output: Month, day, 1 - 12 hr., 0 - 59 min.; Material: Metal; Material: Metal; Color: Green; Color: Green; Standards: CSA; UL; Approval Listing/Regulations: CSA; UL; Min
• Milling Insert: BDMT070304ER-JT PR1810, Carbide
• Milling Insert: BDMT070308ER-JT PR1810, Carbide
• 303 Stainless Steel Round Rod: 9/16" Dia, 6' Long
• Ball End Mill: 6.00 mm Dia, 10.00 mm LOC, 4 Flute, Solid Carbide
• Reamer Collet Chucks; Collet System: Sealed; Collet Series: ER11; Shank Type: Straight; Minimum Collet Capacity: 1.0; Maximum Collet Capacity: 7.0; Overall Length: 95.50
• ER Collet: 6.00 mm Collet Size, Through Coolant
• Collet Sets; Collet System: ER; Collet Series: ER16; Minimum Collet Capacity (Decimal Inch): 0.1410
• Ball End Mill: 5.00 mm Dia, 9.00 mm LOC, 4 Flute, Solid Carbide
• Ball End Mill: 8.00 mm Dia, 12.00 mm LOC, 4 Flute, Solid Carbide
• Ball End Mill: 10.00 mm Dia, 14.00 mm LOC, 4 Flute, Solid Carbide
• Ball End Mill: 16.00 mm Dia, 22.00 mm LOC, 4 Flute, Solid Carbide
• Ball End Mill: 12.00 mm Dia, 16.00 mm LOC, 4 Flute, Solid Carbide
• Ball End Mill: 3.00 mm Dia, 8.00 mm LOC, 4 Flute, Solid Carbide
• Reamer Collet Chucks; Collet System: Sealed; Collet Series: ER11; Shank Type: Straight; Minimum Collet Capacity: 1.0; Maximum Collet Capacity: 7.0; Overall Length: 95.50
• Milling Machine Cleaning Tools; Tool Type: Spindle Taper Wiper; Material: Plastic, Rubber; Handle Material: Rubber Grip, Plastic; Machine Part Compatibility: HSK-A63, HSK-C63; Features: Spindle wiper with rubber blades
• Reamer Collet Chucks; Collet System: Sealed; Collet Series: ER11; Shank Type: Straight; Minimum Collet Capacity: 1.0; Maximum Collet Capacity: 7.0; Overall Length: 60.00
• Coolant Hose Elbows, Fittings & Reducers; Coolant Hose Fitting Type: Straight; Connection Type: BSPT x NPT/NPTF; System Size: 0.125; Body Material: Brass; Number Of Pieces: 1
• Reamer Collet Chucks; Collet System: Sealed; Collet Series: ER16; Shank Type: Straight; Minimum Collet Capacity: 1; Maximum Collet Capacity: 10.0; Overall Length: 107.00
• Tap Collets; Collet Type: ER; Collet Series: ER40; TIR (mm): 0.0100; TIR (Decimal Inch): 0.000394; Collet Size (Decimal Inch): 0.1680; Minimum Collet Capacity: 0.1680; Tap Size: #8 - 5/32 in
• ER Collet: 6.00 mm Collet Size, Through Coolant
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8326; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Milling Insert: BDMT11T308ER-N2 PR1810, Carbide
• Compression Tube Straight: M45x2, 35" Tube ID, 35 mm Tube OD, Tube OD
• Plastic Rod: 96" Long, 9" Dia, Natural Color, Opaque, 5000 psi Tensile Strength
• Plastic Rod: 12" Long, 1" Dia, Yellow, Opaque, 10000 psi Tensile Strength
• Plastic Rod: 12" Long, 3" Dia, Natural Color, Opaque, 5000 - 1000 psi Tensile Strength
• Plastic Rod: 36" Long, 0.25" Dia, Natural Color, Opaque, 5000 psi Tensile Strength
• Turning Insert: CNMG120412-UM YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120404-UL YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Ball End Mill: 3.00 mm Dia, 2.30 mm LOC, 2 Flute, Solid Carbide
• Turning Insert: CNMG120412-UM YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120408-MF YG213, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120408-MF YG211, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120404MM YG213, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Pilot & Indicator Lights; Pilot Light Type: Press-to-Push Pilot Light; Lamp Type: LED; Light Color: Green; Voltage: 110.00 V, 120.00 V; Overall Diameter: 0.870; Electrical Connection Type: Screw Clamp; Panel Cut-out Diameter: 22 mm
• Turning Insert: CNMG120412-MM YG211, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120408-MR YG211, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Pilot & Indicator Lights; Pilot Light Type: Press-to-Push Pilot Light; Lamp Type: LED; Light Color: Red; Voltage: 110.00 V, 120.00 V; Overall Diameter: 1.180; Electrical Connection Type: Screw Clamp; Panel Cut-out Diameter: 30 mm
• Turning Insert: CNMG120404-UF YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Pilot & Indicator Lights; Pilot Light Type: Press-to-Push Pilot Light; Lamp Type: LED; Light Color: Green; Voltage: 110.00 V, 120.00 V; Overall Diameter: 1.180; Electrical Connection Type: Screw Clamp; Panel Cut-out Diameter: 30 mm
• Turning Insert: CNMG120412-MR YG3015, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: NP-SNGA433-SE2 MB4120, Cubic Boron Nitride (CBN)
• Turning Insert: CNMG120408-UF YG3015, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Square End Mill: 3 Flute, Solid Carbide
• Turning Insert: CNMG120404-UM YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120404-UF YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7669; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: CNMG120412-MG YG211, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.7403; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: CNMG120412-MG YG213, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Collet Chuck: 0.50 to 14.00 mm Capacity, ER Collet, 20.00 mm Shank Dia
• Turning Insert: CNMG120408-MG YG211, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Deburring Wheel: 1-1/2" Dia, 1/16" Face Width, 1/4" Hole, Aluminum Oxide
• Turning Insert: CNMG120412-UG YG3015, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Sanding Sheet: 9" Width, 11" OAL, 0 Grit, Emery, Non-Woven
• Turning Insert: CNMG120404-MM YG211, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Square End Mills; Length of Cut (Decimal Inch): 1.2500; Length of Cut (Inch): 1-1/4; Shank Diameter (Inch): 1/4; Shank Diameter (Decimal Inch): 0.2500; Overall Length (Decimal Inch): 2.5000; Overall Length (Inch): 2-1/2
• Turning Insert: CNMG120408UM YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120412-MR YG214, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Abrasive Belt: 1" Wide, 21" OAL, Aluminum Oxide
• Turning Insert: CNMG120408-MF YG214, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Hex Key:
• Abrasive Belt: 2" Wide, 42" OAL, Aluminum Oxide
• Turning Insert: CNMG120408-MR YG3015, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120412-SM YG213, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Impact Socket: 1" Drive, 22 mm Socket
• Turning Insert: CNMG120412-UF YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120412-SM YG211, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Open End Wrenches; Wrench Type: Open End Wrench; Tool Type: 1-7/16" SAE 15¬∞ - 60¬∞ Double Open End Angle-Head Wrench; Head Type: Open End, Double End; Wrench Size: 1-7/16"; Number Of Points: 12; Material: Steel; Finish: Satin, Chrome
• Turning Insert: CNMG120408-UC YG1001, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Barrier Rope & Chain; Type: Safety Chain; Snap End Material: Polyethylene, Plastic; Hook Fitting Material: Plastic; Color: Red; Link Type: Straight Link; Rope/ Chain Material: Polyethylene, Plastic
• Turning Insert: CNMG120408-SM YG214, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Woodruff Keyseat Cutter: 1" Cut Dia, 3/8" Cut Width, 1/2" Shank Dia, Straight Tooth
• Turning Insert: CNMG120408-MF YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Woodruff Keyseat Cutter: 1" Cut Dia, 5/32" Cut Width, 1/2" Shank Dia, Straight Tooth
• Turning Insert: CNMG120412-UL YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Pullers & Separators; Type: Pilot Bearing Puller; Applications: Bearings; Application: Rings; Maximum Spread (Decimal Inch): 1.5; Maximum Spread (Inch): 1-1/2; Minimum Spread (Inch): 3/8; Minimum Spread (Decimal Inch): 0.4; Number Of Jaws: 2; Reach (Decim
• Turning Insert: CNMG120412-UL YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120412-UG YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Pullers & Separators; Type: Pilot Bearing Puller; Applications: Bearings; Application: Bearings; Maximum Spread (Decimal Inch): 1.5; Maximum Spread (Inch): 1-1/2; Minimum Spread (Inch): 3/16; Minimum Spread (Decimal Inch): 0.2; Number Of Jaws: 2; Reach (D
• Turning Insert: CNMG120412-UR YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Pullers & Separators; Type: Pilot Bearing Puller; Applications: Bearings; Application: Rings; Maximum Spread (Decimal Inch): 1.5; Maximum Spread (Inch): 1-1/2; Minimum Spread (Inch): 5/8; Minimum Spread (Decimal Inch): 0.6; Number Of Jaws: 2; Reach (Decim
• Turning Insert: CNMG120412-UL YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Woodruff Keyseat Cutter: 3/8" Cut Dia, 3/8" Shank Dia, Straight Tooth
• Turning Insert: CNMG120412-UR YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Woodruff Keyseat Cutter: 24.00 mm Cut Dia, 5.00 mm Cut Width, 12.70 mm Shank Dia, Straight Tooth
• Turning Insert: CNMA120416 YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMA
• Turning Insert: CNMG120408-UR YG3015, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120408-MG YG213, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120408-MR YG213, Solid Carbide TiAlN Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120408-UG YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120412-MM YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120408-UM YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Turning Insert: CNMG120404-UM YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 1/2″ Inscribed Circle, N/A Series CNMG
• Ball End Mill: 3.00 mm Dia, 2.30 mm LOC, 2 Flute, Solid Carbide
• O-Ring: 3/4″ ID x 7/8″ OD, 1/16″ Thick, Dash 018, HNBR Round Cross Section
• Ball End Mill: 3.00 mm Dia, 2.30 mm LOC, 2 Flute, Solid Carbide
• O-Ring: 1-5/16″ ID x 1-9/16″ OD, 1/8″ Thick, Dash 219, HNBR Round Cross Section
• Ball End Mill: 2.50 mm Dia, 1.90 mm LOC, 2 Flute, Solid Carbide
• O-Ring: 1-3/8″ ID x 1-5/8″ OD, 1/8″ Thick, Dash 220, HNBR Round Cross Section
• Indexable Square-Shoulder Face Mill: R220.9406.00LO1214A, 6'' Cut Dia, 2.0000" Arbor Hole Dia, 0.4724" Max Cutting Depth
• O-Ring: 2-7/8″ ID x 3-1/8″ OD, 1/8″ Thick, Dash 233, HNBR Round Cross Section
• Milling Insert: TOMT060508ER-GM PR1810, Carbide
• Ball End Mill: 2.50 mm Dia, 1.90 mm LOC, 2 Flute, Solid Carbide
• Milling Insert: LOMU100404ER-GM PR1810, Carbide
• Depressed-Center Wheels; T27 4.5X1/4X5/8-11 24G CLIPPER CONCRETE GRND WHL
• Turning Insert: CNMG322 T9205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Cutoff Wheel: Type 1 (01/41), 14" Dia, 1/8" Thick, Aluminum Oxide
• Turning Insert: RCMM1003M0-61 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1970″ Corner Radius, 0.0 &deg N/A Round, Series RCMM
• Coolant Hose Tools; For Use With: 1/2 Snap-Loc System; Number Of Pieces: 1
• Turning Insert: SNMG322 T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Turning Insert: CNMG322TM T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMG432MA MC6035, Carbide
• Turning Insert: SNMG322TM T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Turning Insert: CNMG322 T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: SNMG321TM T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Turning Insert: CCMW21.51 T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMW
• Turning Insert: TPMR221CM T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMR
• Turning Insert: TPMR222CM T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPMR
• Turning Insert: RCGT0803MO-AL CWN15, Solid Carbide TiN Finish, Neutral, 0.1575″ Corner Radius, 0.0 &deg N/A Round, Series RCGT
• Turning Insert: RCGT0602MO-AL CWN15, Solid Carbide TiN Finish, Neutral, 0.1181″ Corner Radius, 0.0 &deg N/A Round, Series RCGT
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Satin Stainless Steel; Minimum Door Width: 2.25 ft
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8855; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Inserts; Insert Style: SNMG; Insert Shape Code: S; Insert Size Code: 120404; Coating/Finish: TiAlN; Corner Radius (Inch): 1/64; Insert Material: Solid Carbide; Inscribed Circle (Inch): 1/2; Width (Inch): 1/2; Insert Thickness (Inch): 3/16; Clearan
• Turning Inserts; Insert Style: SNMG; Insert Shape Code: S; Insert Size Code: 120412; Coating/Finish: TiAlN; Corner Radius (Inch): 3/64; Insert Material: Solid Carbide; Inscribed Circle (Inch): 1/2; Width (Inch): 1/2; Insert Thickness (Inch): 3/16; Clearan
• Turning Inserts; Insert Style: SNMG; Insert Shape Code: S; Insert Size Code: 120408; Coating/Finish: TiAlN; Corner Radius (Inch): 1/32; Insert Material: Solid Carbide; Inscribed Circle (Inch): 1/2; Width (Inch): 1/2; Insert Thickness (Inch): 3/16; Clearan
• Corner Rounding End Mill: 0.0984" Radius, 1/2" Dia, 5 Flutes, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9365; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: RCGT0602MOENSM, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1181″ Corner Radius, 0.0 &deg N/A Round, Series RCGT
• Turning Insert: RCGT0602MOENSM CTCP125, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.1181″ Corner Radius, 0.0 &deg N/A Round, Series RCGT
• Turning Insert: TPUN321EN CTCP135, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TPUN
• Turning Insert: RCGT0602MOENSM CTCP135, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.1181″ Corner Radius, 0.0 &deg N/A Round, Series RCGT
• FlexC 42 Quick-Change Collet 22mm Round Serrated
• FlexC 42 Quick-Change Collet 21mm Round Serrated
• FlexC 65 Quick-Change Collet 1-3/8" Hex Serrated
• FlexC 42 Quick-Change Collet 20mm Round Serrated
• FlexC 42 Quick-Change Collet 19mm Round Serrated
• Shaft Collar: Shaft, 11/16" OD, Steel
• Turning Insert: CCMT09T304-UG YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: TNMG220408-UG YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: CCMT09T308-UG YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: CCMT09T308-UF YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: TNMG220416-UR YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: CCMT09T308-UF YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: CCMT09T308-UF YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: TNMG220416-UG YG1001, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: TNMG220404-UF YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: TNMG220404-UF YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: CCMT09T304-UF YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: TNMG220416-UG YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Woodruff Keyseat Cutter: 1-1/4" Cut Dia, 1/8" Cut Width, 1/2" Shank Dia, Straight Tooth
• Turning Insert: CCMT09T304-UG YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: TNMG220408-UG YG1001, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: TNMG220416-UG YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Closed Shelving Free Standing Unit: 8 Shelves, 80 lb Shelf Capacity
• Turning Insert: TNMG220416-UG YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: TNMG220416-UG YG3015, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: CCMT09T304-UF YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Pedestrian Barrier Kits; Chain Material: Polyethylene; Post Material: HDPE; Surface Pattern: Solid Color; Chain Color: Red; Post Color: Red; Inside Link Length: 1.42 in; Inside Link Width: 0.59
• Turning Insert: CCMT09T304-UF YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: CCMT09T304-UG YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8263; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Turning Insert: CCMT09T308-UG YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.3620″ Long, 3/8″ Inscribed Circle, N/A Series CCMT
• Turning Insert: TNMG220412-UR YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: TNMG220408-UG YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: TNMG220408-UG YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG
• Turning Insert: TNMG220416-UR YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.8270″ Long, 1/2″ Inscribed Circle, N/A Series TNMG