Products

• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Aluminum; Material: Aluminum; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Compression Spring: 2.233″ OD, 4″ Free Length 230.787 lb Max Load, 129.012 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 5″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 36.003 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: #36, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Grooving Insert: TGUX K10, Solid Carbide Uncoated, Neutral, 0.795″ Cutting Width, Series TGUX
• Square End Mill: 3/64'' Dia, 0.141'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• 8mm x 5' Viton Round Cord Stock 400°F Max, Shore 75A, 2,250 psi Tensile Strength, Black
• Ball End Mill: 0.06″ Dia, 0.09″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 5/64'' Dia, 0.117'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Grooving Insert: TGUX P40, Solid Carbide Uncoated, Neutral, 0.795″ Cutting Width, Series TGUX
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Corner Radius End Mill: 0.1562″ Dia, 3/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.5″ Dia, 1″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Corner Radius End Mill: 0.055″ Dia, 0.083″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.035″ Dia, 0.052″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Jobber Length Drill Bit: 0.12″ Dia, 180 °, Solid Carbide TiB2 Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.015″ Dia, 0.045″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, 2B, Powdered Metal High Speed Steel, Uncoated 23 mm Thread Length, 110 mm OAL, Right Hand, Series CoroTap 200
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.047″ Dia, 0.141″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• 8mm Diam 3-Flute Variable Helix Solid Carbide Square Roughing & Finishing End Mill AlTiN Finish, 19mm LOC, 64mm OAL, 8mm Shank Diam
• Ball End Mill: 0.015″ Dia, 0.022″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 15/32'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• CNGA434S0835H 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/2″ Inscribed Circle, 0.063″ Corner Radius, 3/16″ Thick
• Boring Bar: 1/32mm Min Bore, 5/32″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• CNGA431S0530F 7135 CBN Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 3/16″ Thick
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.05″ Dia, 0.15″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• CNGA432S0530F 7135 CBN Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 3/16″ Thick
• CNGA433S0835H 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 3/16″ Thick
• Square End Mill: 0.004'' Dia, 0.012'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• DNGA432S0835H 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 3/16″ Thick
• Square End Mill: 7/64'' Dia, 21/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• DNGA433S0530F 7135 CBN Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 3/16″ Thick
• Ball End Mill: 0.026″ Dia, 0.078″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.04″ Dia, 0.12″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• DNGA432S0530F 7135 CBN Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 3/16″ Thick
• Boring Bar: 0.036″ Min Bore, 5/32″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• DNGA433S0835H 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 3/16″ Thick
• CNGA433S0530F 7135 CBN Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 3/16″ Thick
• Chucking Reamer: 7/64" Dia, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.015″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2010
• 3mm, 118° Drill Point, 3mm Shank Diam, Fast Spiral Circuit Board Drill Bit 16mm Flute Length, 38mm OAL, Series 300
• Ball End Mill: 0.25″ Dia, 1.5″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2010
• Compression Spring: 1.937″ OD, 4″ Free Length 254.243 lb Max Load, 169 lb/in Spring Rate, Music Wire
• SpyroTec 16.5mm Head Diam, 3.2mm Cut Diam, 10mm Shank Diam, 3 Flute 90° Cobalt Countersink TiAlN Finish, Single End, 10mm Shank Diam, Right Hand Cut
• Gray Double-Sided Foam Tape: 1/2″ Wide, 25 mil Thick, Acrylic Adhesive
• SpyroTec 15mm Head Diam, 3.2mm Cut Diam, 10mm Shank Diam, 3 Flute 90° Cobalt Countersink TiAlN Finish, Single End, 10mm Shank Diam, Right Hand Cut
• Compression Spring: 2.526″ OD, 7″ Free Length 0.207″ Wire Dia, 121.552 lb Max Load, 28.365 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 7/16-14, UNC, 3 Flutes, Plug, 2B, Powdered Metal High Speed Steel, Uncoated 20 mm Thread Length, 100 mm OAL, Right Hand, Series CoroTap 200
• CNGA432S0835H 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 3/16″ Thick
• 20.5mm Head Diam, 25/64″ Shank Diam, 90° Cobalt Countersink 2-1/2″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 2.761″ OD, 5.5″ Free Length 0.225″ Wire Dia, 140.829 lb Max Load, 42.872 lb/in Spring Rate, Music Wire
• Compression Spring: 2.82″ OD, 5.5″ Free Length 0.225″ Wire Dia, 138.001 lb Max Load, 41.543 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Polytetrafluroethylene Film Tape: 1-1/2″ Wide, 5 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Compression Spring: 1.41″ OD, 9″ Free Length 0.177″ Wire Dia, 136.472 lb Max Load, 33.979 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.157″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.154″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 1.41″ OD, 4.5″ Free Length 349.474 lb Max Load, 327.627 lb/in Spring Rate, Music Wire
• TCMX1.81.51-WF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 7/32″ Inscribed Circle, 0.0156″ Corner Radius, 3/32″ Thick, 60° Diamond
• Compression Spring: 1.528″ OD, 7.5″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 48.306 lb/in Spring Rate, Music Wire
• Milling Insert: KDMB0625M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 0.6250″ OAW
• Compression Spring: 1.586″ OD, 5.75″ Free Length 0.135″ Wire Dia, 43.754 lb Max Load, 14.125 lb/in Spring Rate, Stainless Steel
• Milling Insert: KDMB16M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 0.6300″ OAW
• Swivel Top Plate Caster: Thermoplastic Rubber, 2-15/16″ Wheel Dia, 15/16″ Wheel Width, 165 lb Capacity, 3-15/16″ OAH 2.375″ Plate Length, 2.38″ Plate Width, Total-Lock Brake
• Swivel Top Plate Caster: Rubber, 2-1/2″ Wheel Dia, 1-1/16″ Wheel Width, 176 lb Capacity, 3-1/4″ OAH 3.875″ Plate Length, 2.75″ Plate Width, Side Cam
• Turning Insert: CCGW32.51FNB3Q CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW32.52FNB3Q CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Square End Mill: 5/64'' Dia, 5/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: CCGW3252TN012DB3Q, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CNMG433THS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• 1/4″ Head Diam, 1/4″ Shank Diam, 3 Flute 90° Cobalt Countersink TiN Finish, 1-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6H + 0.1 Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D13 & D14, Series 4627
• Turning Insert: CNMG432AM T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• WNMG431-FF2 TP2500 Carbide Turning Insert 1/2″ Inscribed Circle, 1/64″ Corner Radius, Trigon
• Corner Radius End Mill: 3/8″ Dia, 3/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Turning Insert: CNMG431TM T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Chucking Reamer: #35, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1; Length (yd): 5.00; Thickness (mil): 2.3000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 467
• Square End Mill: 13/32'' Dia, 1'' LOC, 7/16'' Shank Dia, 2-3/4'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Chucking Reamer: #34, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Spiral Flute Tap: M6 x 1.00, M, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5, Series C0503000
• Jobber Length Drill Bit: 0.375″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Milling Insert: KDMT0375SRHF, KCPK25, Cast Iron & Steel N/A Finish, 0.3750″ OAW
• Turning Insert: DNMG432RP, High Temperature Alloy AlTiN Finish, 0.5000″ Long, 0.0313″ Corner Radius, N/A Series KENLOC
• Compression Spring: 1.939″ OD, 8″ Free Length 0.177″ Wire Dia, 74.281 lb Max Load, 19.177 lb/in Spring Rate, Stainless Steel
• Milling Insert: KDMT0500SRHF, KCPK25, Cast Iron & Steel N/A Finish, 0.5000″ OAW
• Milling Insert: KDMT1008SRHF, KCPK25, Cast Iron & Steel N/A Finish, 0.3937″ OAW
• Milling Insert: KDMT1210SRHF, KCPK25, Cast Iron & Steel N/A Finish, 0.4724″ OAW
• Chucking Reamer: 0.1693″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius End Mill: 3/8″ Dia, 9/16″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2417MC
• Compression Spring: 2.35″ OD, 5″ Free Length 152.833 lb Max Load, 79.306 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 9/16″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Duct Tape: 72 mm Wide, 3 mil Thick, Polyethylene Film Acrylic Adhesive, 22 lb/in Tensile Strength
• Chucking Reamer: 0.177″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Chucking Reamer: 0.161″ Dia, 2-1/2″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Back Chamfers; Cutter Head Diameter (Decimal Inch): 0.1875 in; Included Angle: 90.00; Number of Flutes: 5; Chamfer Width (Decimal Inch): 0.0330 in; Chamfer Width: 0.0330 in; Back Chamfer Material: Solid Carbide; Overall Length (Inch): 2.00; Coated: Uncoat
• 0.5mm Radius 3/16″ Diam 3-Flute AlTiN Finish Back Corner Rounding End Mill 3/16″ Shank Diam, 2″ OAL, Solid Carbide
• Spiral Point Tap: 12-24, UNC, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.15″ OAL, Left Hand, X, Series Rekord B
• Spiral Point Tap: 12-28, UNF, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.15″ OAL, Left Hand, X, Series Rekord B
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1/2; Length (yd): 5.00; Thickness (mil): 6.0000; Minimum Operating Temperature (F): -60.000; Maximum Operating Temperature (F): 250.000; Color: Clear; Liner Material: Kraft Paper; Series: 4
• Square End Mill: 5/32'' Dia, 1.57'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.025″ Dia, 0.037″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: 5/8-11, UNC, 4 Flute, Semi-Bottoming, 2BX Class of Fit, Slidur Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 4652
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.039″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Ball End Mill: 0.4375″ Dia, 2″ LOC, 3 Flute, Solid Carbide 4″ OAL, 7/16″ Shank Dia, 37 ° Helix, Uncoated, Single End, Series 2045
• Tapered End Mill: 5 ° per Side, 3/32″ Small Dia, 1/2″ LOC, 3 Flutes, Solid Carbide, Square End 3/16″ Shank Dia, 2″ OAL, Uncoated, Series Miniature End Mills - Tapered - Square
• Compression Spring: 2.585″ OD, 5.5″ Free Length 0.225″ Wire Dia, 149.99 lb Max Load, 47.43 lb/in Spring Rate, Music Wire
• Square End Mill: 3/8'' Dia, 2'' LOC, 3/8'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Screw Machine Length Drill Bit: 0.7657″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 223
• Jobber Length Drill Bit: 0.3051″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Ball End Mill: 0.03″ Dia, 0.045″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Jobber Length Drill Bit: 0.3161″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Corner Radius End Mill: 5/16″ Dia, 1-1/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Ball End Mill: 0.1969″ Dia, 0.6299″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 6 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.062″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 4 Teeth, Solid Carbide
• Jobber Length Drill Bit: 0.339″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Jobber Length Drill Bit: 0.05″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.093″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Milling Insert: LNGU15T616SRGEM, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• 5/16″ x 5' Buna-N Round Cord Stock 250°F Max, Shore 90A, 2,000 psi Tensile Strength, Black
• Jobber Length Drill Bit: 0.348″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Milling Insert: LNGU15T612SRGEM, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• Square End Mill: 0.1181'' Dia, 0.3543'' LOC, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: DCGT32.50.5F-01 SH725, Solid Carbide TiAlN Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Compression Spring: 2.233″ OD, 6.75″ Free Length 0.207″ Wire Dia, 136.734 lb Max Load, 35.758 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.147″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: GDG3015GS GW15, Solid Carbide Co & WC Finish, Neutral, 3 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Screw Machine Length Drill Bit: 0.3504″ Dia, 118 °, High Speed Steel Oxide Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 223
• Chucking Reamer: #33, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Milling Insert: LNPU15T612SRGE, KCK20B, Solid Carbide N/A Finish, 0.3937″ OAW
• Milling Insert: LNPU15T616SRGE, KCK20B, Solid Carbide N/A Finish, 0.3937″ OAW
• Screw Machine Length Drill Bit: 0.0567″ Dia, 180 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5700
• Screw Machine Length Drill Bit: 0.061″ Dia, 180 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5700
• Milling Insert: LNPU15T604SRGE, KCK20B, Solid Carbide N/A Finish, 0.3937″ OAW
• Milling Insert: LNPU15T608SRGE, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• Compression Spring: 1.351″ OD, 3.25″ Free Length 0.25″ Wire Dia, 251.765 lb Max Load, 467.414 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.1772″ Dia, 0.6299″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 6 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.2165″ Dia, 0.6299″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 6 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: XDHW 0903AEFN H216T, H216T, Solid Carbide N/A Finish,
• Chucking Reamer: #32, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Electromagnet Lock Accessories; Type: Wire Harness; For Use With: McKinney QC Concealed Circuit Electric Hinges; Material: Plastic; Material: Plastic; For Use With: McKinney QC Concealed Circuit Electric Hinges; Type: Wire Harness; Accessory Type: Wire Ha
• Polytetrafluroethylene Film Tape: 1-1/2″ Wide, 5 yd Long, 5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Chucking Reamer: 0.1181" Dia, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Turning Insert: SPGW431 TH10, Solid Carbide Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 90.0 &deg N/A Square, Series SPGW
• Chucking Reamer: #31, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Compression Spring: 0.823″ OD, 6.5″ Free Length 0.112″ Wire Dia, 49.119 lb Max Load, 20.152 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.1240" Dia, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Chucking Reamer: 1/8" Dia, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Compression Spring: 0.999″ OD, 3.5″ Free Length 0.148″ Wire Dia, 85.888 lb Max Load, 81.492 lb/in Spring Rate, Stainless Steel
• Tool Bags & Tool Totes; Closure Type: No Closure; Material: Nylon; Overall Width: 10; Overall Depth: 5 in; Overall Height: 11 in; Color: Orange; Insulated: No; Features: Adjustable Waist Belt; Strong Material; Number Of Pockets: 8.000
• Chucking Reamer: 0.1260" Dia, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Tool Bags & Tool Totes; Closure Type: No Closure; Material: Nylon; Overall Width: 10; Overall Depth: 5 in; Overall Height: 11 in; Color: Red; Insulated: No; Features: Adjustable Waist Belt; Strong Material; Number Of Pockets: 8.000
• Chucking Reamer: #30, 3-1/2" OAL, 7/8" Flute Length, Straight-Cylindrical Shank, HSS
• Chucking Reamer: #29, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Chucking Reamer: 0.1378" Dia, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Milling Inserts; Insert Style: XRAD; Insert Size: 13020; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 1/8; Thickness (Inch): 1/8; Length Range (Decimal Inch): 0.4000 to 0.4500; Series: XRAD; Coating/Finish: DLC; Length (Decima
• Ball End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCrO-MAX Coated, Single End
• Chucking Reamer: #28, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Milling Inserts; Insert Style: XRAD; Insert Size: 13010; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 1/8; Thickness (Inch): 1/8; Length Range (Decimal Inch): 0.4000 to 0.4500; Series: XRAD; Coating/Finish: DLC; Length (Decima
• Clear Double-Sided Acrylic Tape: 1-1/2″ Wide, 1.5 yd Long, 20 mil Thick, Acrylic Adhesive
• Milling Inserts; Insert Style: XRAD; Insert Size: 13005; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 1/8; Thickness (Inch): 1/8; Length Range (Decimal Inch): 0.4000 to 0.4500; Series: XRAD; Coating/Finish: DLC; Length (Decima
• White Double-Sided Polyethylene Foam Tape: 1″ Wide, 5 yd Long, 31 mil Thick, Rubber Adhesive
• Black Double-Sided Polyethylene Foam Tape: 1″ Wide, 5 yd Long, 31 mil Thick, Rubber Adhesive
• Clear Double-Sided Acrylic Tape: 1-1/2″ Wide, 20 mil Thick, Acrylic Adhesive
• 38mm OAL Spotting Drill 5mm Flute Length, 3mm Shank Diam
• Spiral Flute Tap: 5/8-11, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• O-Ring: 7″ ID x 7-1/2″ OD, 1/4″ Thick, Dash 441, HNBR Round Cross Section
• Compression Spring: 1.88″ OD, 6.5″ Free Length 0.207″ Wire Dia, 160.849 lb Max Load, 50.264 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Jobber Length Drill Bit: 0.1614″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Jobber Length Drill Bit: 0.1654″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Inch; Head Type: Offset; Box End Type: 12-Point; Wrench Size (Decimal Inch): 0.0780; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Le
• O-Ring: 1.6″ ID x 1.56″ OD, 1/4″ Thick, Silicone with SS Screen Round Cross Section
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 13.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Dec
• Milling Insert: XDHT 11T340FR-27P H216T, H216T, Solid Carbide N/A Finish,
• Milling Insert: XDHT 11T350FR-27P H216T, H216T, Solid Carbide N/A Finish,
• 120° 6″ OAL High Speed Steel Spotting Drill Bright/Uncoated, 1-3/8″ Flute Length, 1/2″ Shank Diam, RH Cut
• Chucking Reamer: 0.1635″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Chucking Reamer: 0.0385″ Dia, 1-1/2″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 3 Flute
• Chucking Reamer: 0.0305″ Dia, 1-3/8″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 3 Flute
• Square End Mill: 7/64'' Dia, 0.164'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Chucking Reamer: 0.03″ Dia, 1-3/8″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 3 Flute
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, AlTiN Coated
• 90° 5″ OAL High Speed Steel Spotting Drill Bright/Uncoated, 1-7/8″ Flute Length, 3/4″ Shank Diam, RH Cut
• Chucking Reamer: 0.1375″ Dia, 4″ OAL, 1″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Slitting & Slotting Saw: 1″ Dia, 1/16″ Thick, 3/8″ Arbor Hole, 12 Teeth, Solid Carbide Bright/Uncoated
• Chucking Reamer: 0.1585″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Chucking Reamer: 0.1655″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Chucking Reamer: 0.169″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Double Angle Milling Cutter: 90 °, 3/16″ Cut Dia, 1/8″ Cut Width, 3″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Coated, 4 Teeth
• Spiral Flute Tap: #6-32, UNC, 3 Flute, Semi-Bottoming, High Speed Steel-E, TiAlN Finish 2.258″ OAL, Right Hand Flute, Right Hand Thread, H7, Series TC117
• Compression Spring: 2.056″ OD, 4.5″ Free Length 0.207″ Wire Dia, 106.065 lb Max Load, 55.414 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: 1/4-28, UNF & DIN/ANSI, 3 Flutes, Plug, HSS-E, TiAlN Finish 15 mm Thread Length, 80 mm OAL, Right Hand, H7, Series TC217
• Chucking Reamer: 9/64" Dia, 4" OAL, 1" Flute Length, Straight-Cylindrical Shank, HSS
• Compression Spring: 2.409″ OD, 9″ Free Length 149.309 lb Max Load, 41.354 lb/in Spring Rate, Stainless Steel
• RPGX35T00420KXW1 KXW1 Ceramic Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0″ Corner Radius, 0.315″ Thick, Round
• Grooving Insert: GDM5020GMI PR1215, Solid Carbide Megacoat, Neutral, 5 mm Cutting Width, 11 mm Max Depth, Series KGD
• Grooving Insert: GDM5020 PR1535, Solid Carbide Megacoat Nano Finish, Neutral, 5 mm Cutting Width, 11 mm Max Depth, Series KGD
• Latches; Type: Spring Loaded Compression Draw Latch; Length (mm): 61.00; Width (mm): 46.00; Height (mm): 16.0000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 25; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless St
• Brackets; Type: Angle Bracket; Length (mm): 80.00; Width (mm): 52.00; Height (mm): 80.0000; Load Capacity (Lb.): 31.000; Finish/Coating: Satin; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• Jobber Length Drill Bit: 0.5625″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: GDM5020 PR1535, Solid Carbide Megacoat Nano Finish, Neutral, 5 mm Cutting Width, 11 mm Max Depth, Series KGD
• Compression Spring: 2.233″ OD, 8.5″ Free Length 0.192″ Wire Dia, 110.918 lb Max Load, 21.514 lb/in Spring Rate, Music Wire
• Grooving Insert: GDM5020 PR1215, Solid Carbide Megacoat, Neutral, 5 mm Cutting Width, 11 mm Max Depth, Series KGD
• Compression Spring: 2.174″ OD, 5″ Free Length 164.385 lb Max Load, 91.882 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.293″ OD, 5.75″ Free Length 0.25″ Wire Dia, 261.179 lb Max Load, 278.187 lb/in Spring Rate, Stainless Steel
• Grooving Insert: QI-NFGF 1125, Solid Carbide Neutral, 0.11″ Cutting Width, Series CoroCut QI
• Grooving Insert: QI-NFGF 1145, Solid Carbide Neutral, 0.1051″ Cutting Width, Series CoroCut QI
• Grooving Insert: QI-NFGF 1125, Solid Carbide Neutral, 0.1051″ Cutting Width, Series CoroCut QI
• Duct Tape: 1″ Wide, 3.1 mil Thick, Aluminum Foil Acrylic Adhesive, 19 lb/in Tensile Strength
• Ball End Mill: 0.118″ Dia, 0.354″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Double Angle Milling Cutter: 90 °, 3/32″ Cut Dia, 0.046″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 2 Teeth
• Grooving Insert: QI-NFGF 1145, Solid Carbide Neutral, 0.1043″ Cutting Width, Series CoroCut QI
• Double Angle Milling Cutter: 90 °, 1/16″ Cut Dia, 1/32″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 4 Teeth
• Turning Insert: CNMG543-MU5 WSM20S, TiAlN, Al2O3 & Al Finish, Neutral, 5/8″ Inscribed Circle, 80.0 &deg N/A Rhombic,
• Grooving Insert: QI-NFGF 1125, Solid Carbide Neutral, 0.1043″ Cutting Width, Series CoroCut QI
• Boring Bar: 1/4″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Engraving Cutter: 300 °, 1/4″ Dia, 0.01″ Tip Dia, Tipped Off Point, Solid Carbide Uncoated, 1/2″ LOC, 1/4″ Shank, 2-1/2″ OAL, 1 Flute, Use on Ferrous & Non-Ferrous Metals
• Grooving Insert: QI-NFGF 1145, Solid Carbide Neutral, 0.0969″ Cutting Width, Series CoroCut QI
• Boring Bar: 1/4″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Grooving Insert: QI-NFGF 1125, Solid Carbide Neutral, 0.0969″ Cutting Width, Series CoroCut QI
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Boring Bar: 0.28″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Chamfer Mill: 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Grooving Insert: QI-NFGF 1105, Solid Carbide Neutral, 0.0969″ Cutting Width, Series CoroCut QI
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar: 0.28″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Boring Bar: 1/4″ Min Bore, 1.1″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Square End Mill: 3/16'' Dia, 7/16'' LOC, 3/8'' Shank Dia, 2-5/16'' OAL, 2 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.05″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Boring Bar: 1/4″ Min Bore, 1.3″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Square End Mill: 3/8'' Dia, 9/16'' LOC, 3/8'' Shank Dia, 2-5/16'' OAL, 2 Flutes, Cobalt Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.116″ OD, 9.5″ Free Length 0.112″ Wire Dia, 37.008 lb Max Load, 7.734 lb/in Spring Rate, Stainless Steel