Products

• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Compression Spring: 2.115″ OD, 6.25″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 24.407 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.015″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Compression Spring: 2.291″ OD, 5″ Free Length 0.192″ Wire Dia, 108.231 lb Max Load, 36.371 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Compression Spring: 0.999″ OD, 6″ Free Length 0.177″ Wire Dia, 185.703 lb Max Load, 118.333 lb/in Spring Rate, Music Wire
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Compression Spring: 0.999″ OD, 5.25″ Free Length 0.192″ Wire Dia, 230.793 lb Max Load, 202.463 lb/in Spring Rate, Music Wire
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Compression Spring: 1.586″ OD, 5.75″ Free Length 0.177″ Wire Dia, 122.347 lb Max Load, 43.22 lb/in Spring Rate, Music Wire
• SpyroTec 6.3mm Head Diam, 1.5mm Cut Diam, 5mm Shank Diam, 3 Flute 90° High Speed Steel Countersink TiAlN Finish, Single End, 5mm Straight Shank, Right Hand Cut
• Milling Insert: WAK15, Solid Carbide N/A Finish,
• Compression Spring: 1.586″ OD, 9″ Free Length 0.177″ Wire Dia, 122.347 lb Max Load, 27.537 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M12 x 1.75, M, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D6, Series B0503000
• Milling Insert: WAK15, Solid Carbide N/A Finish,
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Milling Insert: RDPX12T3M0SHN, KCKP10, Solid Carbide N/A Finish,
• All-Purpose & Utility Hooks; Overall Length (Inch): 3; Finish/Coating: Chrome; Maximum Load Capacity: 44.00; Additional Information: Diameter: 77 mm; Minimum Order Quantity: Zinc Alloy; Type: Round Retractable Recessed Hook; Material: Zinc Alloy; Type: Ro
• All-Purpose & Utility Hooks; Overall Length (Inch): 3; Finish/Coating: Dull Chrome; Maximum Load Capacity: 44.00; Additional Information: Diameter: 77 mm; Minimum Order Quantity: Zinc Alloy; Type: Round Retractable Recessed Hook; Material: Zinc Alloy; Typ
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 6.08; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 4.08; Extensio
• All-Purpose & Utility Hooks; Overall Length (Inch): 3; Finish/Coating: Matte Black; Maximum Load Capacity: 44.00; Width (Inch): 3; Minimum Order Quantity: Zinc Alloy; Type: Square Retractable Recessed Hook; Material: Zinc Alloy; Type: Square Retractable R
• All-Purpose & Utility Hooks; Overall Length (Inch): 3; Finish/Coating: Chrome; Maximum Load Capacity: 44.00; Width (Inch): 3; Minimum Order Quantity: Zinc Alloy; Type: Square Retractable Recessed Hook; Material: Zinc Alloy; Type: Square Retractable Recess
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, ZrN Finish 1″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 891
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 6.08; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 4.08; Extensio
• All-Purpose & Utility Hooks; Overall Length (Inch): 3; Finish/Coating: Matte Black; Maximum Load Capacity: 44.00; Additional Information: Diameter: 77 mm; Minimum Order Quantity: Zinc Alloy; Type: Round Retractable Recessed Hook; Material: Zinc Alloy; Typ
• Chucking Reamer: 0.0313″ Dia, 1-3/8″ OAL, 1/2″ Flute Length, Straight Shank, Cobalt 3 Flute
• 120° 6.5mm Diam 70mm OAL 2-Flute High Speed Steel Spotting Drill Bright/Uncoated, 17mm Flute Length, 6.5mm Shank Diam, RH Cut, Series 556
• Corner Radius End Mill: 4 Flutes, Solid Carbide 30 ° Helix, Super-A Coated, Corner Chamfer End, Centercutting, Series 6716
• Chucking Reamer: 0.039″ Dia, 1-1/2″ OAL, 1/2″ Flute Length, Straight Shank, Cobalt 3 Flute
• Process Scales & Balance Scales; System Of Measurement: Grams; Calibration: External; Display Type: LCD; Capacity: 620.000; Platform Length: 5.5 in; Platform Width: 5.5 in
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Turning Insert: CCGW21.51FN_A2 CTDCD10, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Polyester Film Tape: 1″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• Turning Insert: DCGW21.52FN_A2 CTDCD10, Polycrystalline Diamond Diamond Coating Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Polyester Film Tape: 1″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• Grooving Insert: GCM4004GA H10, Solid Carbide Uncoated, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Turning Insert: DCGT3252FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• File or Paper Mailer: 11-5/8″ OAW, 9-3/4″ OAL
• Compression Spring: 0.823″ OD, 2″ Free Length 0.162″ Wire Dia, 128.13 lb Max Load, 393.479 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 3.75″ Free Length 0.049″ Wire Dia, 9.902 lb Max Load, 5.524 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 7″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 33.901 lb/in Spring Rate, Music Wire
• Milling Insert: KDMT0806ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.3150″ OAW
• Milling Insert: KDMT1008ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.3937″ OAW
• Square End Mill: 5/64'' Dia, 15/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 1/64″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Square End Mill: 1/16'' Dia, 0.186'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2012
• Square End Mill: 3/32'' Dia, 0.279'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Hex Key: 7-1/4'' OAL, Forged Carbon Steel, Chrome-Plated
• Compression Spring: 0.353″ OD, 5″ Free Length 0.068″ Wire Dia, 34.727 lb Max Load, 26.961 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 4″ Free Length 0.049″ Wire Dia, 9.902 lb Max Load, 5.17 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.175″ OD, 6.5″ Free Length 0.098″ Wire Dia, 24.557 lb Max Load, 6.554 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.47″ OD, 4.75″ Free Length 0.047″ Wire Dia, 7.781 lb Max Load, 2.962 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.175″ OD, 2.625″ Free Length 0.135″ Wire Dia, 58.097 lb Max Load, 54.456 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.881″ OD, 6.25″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 3.526 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 6.75″ Free Length 0.092″ Wire Dia, 27.195 lb Max Load, 7.977 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 4″ Free Length 0.207″ Wire Dia, 201.95 lb Max Load, 142.055 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.323″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 10 ° Helix, RH Cut, RH Flute
• DCMT21.50.5LF KC730 Carbide Turning Insert TiN Finish, Neutral, 7.75mm Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 3/32″ Thick, 55° Diamond, Series Screw-On
• Double Angle Milling Cutter: 60 °, 1/8″ Cut Dia, 0.046″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, AlTiN Coated, 4 Teeth
• Square End Mill: 1/64'' Dia, 1/16'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, Upcut Flute, 20 ° Helix, RH Cut, RH Flute
• Square End Mill: 1/32'' Dia, 5/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Process Scales & Balance Scales; System Of Measurement: Pounds; Calibration: External; Display Type: LED; Capacity: 6.000; Platform Length: 9.3 in; Platform Width: 7.8 in
• Square End Mill: 0.1969'' Dia, 0.2362'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 2.233″ OD, 5″ Free Length 0.192″ Wire Dia, 110.918 lb Max Load, 37.826 lb/in Spring Rate, Music Wire
• Double Angle Milling Cutter: 90 °, 1/8″ Cut Dia, 1/16″ Cut Width, 1″ Shank Dia, Solid Carbide 1-1/2″ OAL, AlTiN Nano Coated, 4 Teeth
• Ball End Mill: 0.023″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Corner Radius End Mill: 0.0937″ Dia, 1/2″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.045″ Dia, 0.067″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, 1.5-2 P, 3B Class of Fit, GLT-1 Finish 0.63″ Thread Length, Right Hand Flute, Right Hand Thread, H4, Series Enorm
• Turning Insert: TNMG 33 07 16-PR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Triangle, Series TNMG-PR
• Ball End Mill: 0.08″ Dia, 0.12″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 0.411″ OD, 6.75″ Free Length 0.04″ Wire Dia, 5.635 lb Max Load, 1.463 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GCM4004GG AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Milling Insert: KDMB10M0ERGP, KCU15, N/A Finish, 0.3937″ OAW
• Compression Spring: 1.41″ OD, 9.5″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 27.931 lb/in Spring Rate, Stainless Steel
• O-Ring: 2.5″ ID x 2.256″ OD, 0.103″ Thick, Dash 137, Viton Round Cross Section
• Grooving Insert: GCM4008ML AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.031″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Milling Machine Parts & Hardware SHIFT CRANK ASSY SURPL IN HOUSE BRIDGEPORT PART
• O-Ring: 1.987″ ID x 2.193″ OD, 0.103″ Thick, Dash 136, Viton Round Cross Section
• Square End Mill: 1/64'' Dia, 1/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM4002ML AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Compression Spring: 1.469″ OD, 3.25″ Free Length 0.225″ Wire Dia, 179.415 lb Max Load, 226.354 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GCM4020RN AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Straight Flutes Tap: 7/16-20, UNF, 4 Flutes, Plug, 2B & 3B, High Speed Steel, TiN Finish 1-7/16″ Thread Length, Right Hand, H3, Series 729
• Square End Mill: 1/4'' Dia, 1-1/2'' LOC, 1/4'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Grooving Insert: GCM4004MG AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Milling Insert: AH8015, Solid Carbide N/A Finish,
• Ball End Mill: 0.375″ Dia, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, ZrN Coated, Single End, Series 2015
• Grooving Insert: GCM4002MG AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Turning Insert: DNMG443MG, Steel 0.5000″ Long, 0.0469″ Corner Radius, N/A Series KENLOC
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1035
• Grooving Insert: GCM4002CG AC8025P, Solid Carbide Absotech Finish, Left Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.015″ Dia, 0.022″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: DNMG443RP, High Temperature Alloy AlTiN Finish, 0.5000″ Long, 0.0469″ Corner Radius, N/A Series KENLOC
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Square End Mill: 11/64'' Dia, 5/16'' LOC, 3/16'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM4004GG AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Turning Insert: DNMG442RP, High Temperature Alloy AlTiN Finish, 0.5000″ Long, 0.0313″ Corner Radius, N/A Series KENLOC
• Square End Mill: 5/32'' Dia, 5/16'' LOC, 3/16'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM4020RG AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.078″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Turning Insert: DNMG442RN, Cast Iron & Steel 0.5000″ Long, 0.0313″ Corner Radius, N/A Series KENLOC
• Grooving Insert: GCM4004ML AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 1.586″ OD, 7″ Free Length 219.119 lb Max Load, 128.398 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 60 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Grooving Insert: GCM4008MG AC8025P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Grooving Insert: GCM4002ML AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Grooving Insert: GCM4004GF AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.1563″ Dia, 0.3125″ LOC, 3 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 5/32'' Dia, 5/16'' LOC, 3/16'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM4002MG AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4004MG AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4004GL AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Square End Mill: 9/64'' Dia, 1/4'' LOC, 3/16'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GCM4008ML AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.3125″ Dia, 3 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 37 ° Helix, ZrN Coated, Single End, Series 2047
• Grooving Insert: GCM4002CG AC5015S, Solid Carbide Absotech Finish, Right Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Polyester Film Tape: 1/2″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• Door Closer Accessories; For Use With: LCN 1260 Series Door Closers; Finish/Coating: Sprayed Dark Bronze; For Use With: LCN 1260 Series Door Closers
• Grooving Insert: GCM4002CG AC5015S, Solid Carbide Absotech Finish, Left Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Square End Mill: 1/4'' Dia, 1-1/2'' LOC, 1/4'' Shank Dia, 3'' OAL, 7 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 36 ° Helix, RH Cut, RH Flute, Series VGM7
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Painter's Tape & Masking Tape: 3″ Wide, 60 yd Long, 5.5 mil Thick, Green Crepe Paper, Rubber Adhesive, 21 lb/in Tensile Strength
• Grooving Insert: GCM4020RN AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 0.178″ Dia, 1″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: GCM4002GG AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Grooving Insert: GCM4004MG AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• UHMW Film Tape: 2″ Wide, 5 yd Long, 10 mil Thick 60 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Grooving Insert: GCM4002MG AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4004GL AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Grooving Insert: GCM4004GF AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GCM4002GF AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002GF AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 0.078″ Dia, 13/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Swivel Top Plate Caster: Elastic Rubber, 3-15/16″ Wheel Dia, 1-3/8″ Wheel Width, 132 lb Capacity, 5-1/16″ OAH 3.125″ Plate Length, 4.13″ Plate Width, Total-Lock Brake
• Grooving Insert: GCM4002GL AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Kyocera CCMT 21505HQ TN620 Grade Uncoated Cermet, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing-Medium in (P) Carbon/Alloy Steel
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Grooving Insert: GCM4008MG AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Grooving Insert: GCM4004ML AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.4063″ Dia, 1″ LOC, 4 Flute, Solid Carbide 2-3/4″ OAL, 7/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: GCM4020RG AC5015S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.01″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Process Scales & Balance Scales; System Of Measurement: Pounds; Calibration: External; Display Type: LED; Capacity: 15.000; Platform Length: 9.3 in; Platform Width: 7.8 in
• Door Closer Accessories; For Use With: LCN 4040SE Series Door Closers; Body Length: 12.25; Finish/Coating: Sprayed Aluminum; For Use With: LCN 4040SE Series Door Closers
• Jobber Length Drill Bit: 0.161″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.025″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide
• Grooving Insert: GCM4004ML AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Turning Insert: CNMG643-MS3 WSM01, TiAlN Finish, Neutral, 3/4″ Inscribed Circle, 80.0 &deg N/A Rhombic,
• Crane Scales & Hanging Scales; Type: Crane Scale; Capacity (Lb.): 5000.00; Capacity (kg): 2500.0000; Display Type: 6-Digit LCD; Graduation: 2
• Scale Scoops, Scale Calibration Masses & Scale Accessories; Nominal Mass: 20 lb; Material: Cast Iron; Class: ASTM Class 6; Capacity: 20.000; Shape: Slotted
• Grooving Insert: GCM4004GG AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Clear Double-Sided Acrylic Tape: 3/4″ Wide, 20 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.01″ Dia, 0.015″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GCM4008MG AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Masking Tape: 60 yd Long, 7.3 mil Thick, Tan Crepe Paper, Acrylic Adhesive
• Milling Insert: GH130, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.002″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GCM4002CG AC8035P, Solid Carbide Absotech Finish, Right Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Spiral Flute Tap: M4 x 0.70, M, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D4, Series C0503000
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.12″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2012
• Grooving Insert: GCM4002GL AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002GG AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4008ML AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002ML AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Square End Mill: 20mm LOC, 6mm Shank Dia, 57mm OAL, 1 Flute, Solid Carbide Single End, Uncoated, Spiral Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute, Series 6793
• Corner Radius End Mill: 0.3937″ Dia, 5 Flutes, Solid Carbide 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series KOR5
• Grooving Insert: GCM4008MG AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002GL AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 0.3937″ Dia, 5 Flutes, Solid Carbide 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series KOR5
• Grooving Insert: GCM4004ML AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill Head: 1/8″ Dia, 1/4″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Grooving Insert: GCM4020RG AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill Head: 1/8″ Dia, 1/4″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Grooving Insert: GCM4004GG AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Swivel Top Plate Caster: Rubber, 4″ Wheel Dia, 1-1/4″ Wheel Width, 247 lb Capacity, 5″ OAH 2.5″ Plate Length, 3.69″ Plate Width, No Brake
• Grooving Insert: GCM4002GG AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Chucking Reamer: 0.173″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Grooving Insert: GCM4020RN AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Spiral Point Tap: #8-36, UNF, 3 Flutes, Plug, 3B, Cobalt, TiCN Finish Right Hand, H2, Series BU309611
• Grooving Insert: GCM4004GL AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Chucking Reamer: 0.177″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Grooving Insert: GCM4008ML AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002CG AC5025S, Solid Carbide Absotech Finish, Left Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002GF AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002MG AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Chucking Reamer: 0.18″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Grooving Insert: GCM4004MG AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Square End Mill: 7/16'' Dia, 1'' LOC, 7/16'' Shank Dia, 2-3/4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Grooving Insert: GCM4004GF AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002ML AC5025S, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002CG AC5025S, Solid Carbide Absotech Finish, Right Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.63; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63; Extension
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Compression Spring: 1.41″ OD, 6.75″ Free Length 0.207″ Wire Dia, 150.32 lb Max Load, 76.903 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.63; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63; Extension
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.63; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63; Extension
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.63; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63; Extension
• Compression Spring: 1.175″ OD, 4.25″ Free Length 0.192″ Wire Dia, 145.737 lb Max Load, 141.969 lb/in Spring Rate, Stainless Steel
• Boring Bar: 0.23″ Min Bore, 1.6″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 3″ OAL, 0.006″ Corner Radius
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.63; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63; Extension
• Square End Mill: 1/4'' Dia, 1'' LOC, 1/4'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 35 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1.656″ Thread Length, 3.375″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Square End Mill: 7/16'' Dia, 1'' LOC, 7/16'' Shank Dia, 2-3/4'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• FFQ4 SOMT120516T IC830 Carbide Milling Insert TiAlN/AlTiN/TiN Finish, 12.7mm Long x 5.2mm Thick
• Document Protectors; Document Type: Shop Ticket Holder; Material: Vinyl; Color: Assorted; For Document Width: 9 in; For Document Length: 12 in
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 4; Width (Inch): 0.1; Color: Gray
• Turning Insert: VNGG 16 04 04-SGF S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Diamond 35 ™, Series T-Max P
• Compression Spring: 1.939″ OD, 4″ Free Length 0.207″ Wire Dia, 156.254 lb Max Load, 80.585 lb/in Spring Rate, Music Wire
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 4; Width (Inch): 0.1; Color: Natural
• Ball End Mill: 0.4375″ Dia, 1″ LOC, 3 Flute, Solid Carbide 2-3/4″ OAL, 7/16″ Shank Dia, 37 ° Helix, ZrN Coated, Single End, Series 2045
• Turning Insert: VNGG 16 04 08-SGF S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Diamond 35 ™, Series T-Max P
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 1; Width (Inch): 1; Color: Black
• Turning Insert: VNGG 16 04 12-SGF S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Diamond 35 ™, Series T-Max P
• Polybag Tape & Ties; Type: Cable Ties; Overall Length (Inch): 1; Width (Inch): 1; Color: Natural
• 3/4″ Head Diam, 1/2″ Shank Diam, 3 Flute 82° High Speed Steel Countersink Bright Finish, 3″ OAL, 0.23″ Nose Diam, Single End, Straight Shank, Right Hand Cut
• Process Scales & Balance Scales; System Of Measurement: Grams; Calibration: External; Display Type: LCD; Capacity: 120.000; Platform Length: 3.14 in; Platform Width: 3.14 in
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Vanadium High Speed Steel, Nitride Finish 1.6563″ Thread Length, Right Hand Flute, Right Hand Thread, H5, Series 13019
• Screw Machine Length Drill Bit: 0.4844″ Dia, 135 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Personal & Medical Digital & Beam Scales; Scale Type: Wheelchair Scale; Display Type: 5-Digit LCD; Capacity (Lb.): 1000; Capacity (Kg): 450; Graduation: .2; Overall Height (Inch): 45
• Screw Machine Length Drill Bit: 0.5″ Dia, 135 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.18″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Jobber Length Drill Bit: 0.413″ Dia, 135 °, Cobalt Bright/Uncoated, 5.25″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank