Products

• Gate Latches
• Square End Mill: 0.1'' Dia, 0.15'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Boring Bar: 4.5 mm Min Bore, 22.5 mm Max Depth, Right Hand Cut, Carbide 4.50 mm Shank Dia, 51.10 mm OAL, 0.05 mm Corner Radius
• Compression Spring: 2.526″ OD, 4.25″ Free Length 142.773 lb Max Load, 83.676 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/32″ Dia, 0.279″ LOC, 1/64″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, 2B/3B, High Speed Steel, Steam Oxide Finish 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series 751
• Boring Bar: 4.5 mm Min Bore, 22.5 mm Max Depth, Right Hand Cut, Carbide 4.50 mm Shank Dia, 51.10 mm OAL, 0.15 mm Corner Radius
• Square End Mill: 0.0236'' Dia, 0.0354'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Boring Bar: 4.5 mm Min Bore, 22.5 mm Max Depth, Right Hand Cut, Carbide 4.50 mm Shank Dia, 51.10 mm OAL, 0.08 mm Corner Radius
• Square End Mill: 5/16'' Dia, 13/16'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.0787'' Dia, 0.0984'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.125″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 0.0472'' Dia, 0.0709'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Polyester Film Tape: 1/2″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• Compression Spring: 0.881″ OD, 5.5″ Free Length 0.072″ Wire Dia, 17.615 lb Max Load, 4.85 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 8-32, UNC, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 2.48″ OAL, Left Hand, X, Series Rekord B
• Spiral Point Tap: 8-36, UNF, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 2.48″ OAL, Left Hand, X, Series Rekord B
• Combo Drill & Countersink: #3, 1/4″ Body Dia, High Speed Steel Bright (Polished) Finish, 7/64″ Point Dia, 7/64″ Point Length, 6″ OAL, Right Hand Cut
• Chucking Reamer: 1/8″ Dia, 3″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Jobber Length Drill Bit: 0.3906″ Dia, 135 °, Cobalt AlTiN Finish, 5.125″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Ball End Mill: 0.025″ Dia, 0.075″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Ball End Mill: 0.024″ Dia, 0.072″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/64″ Dia, 0.045″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Ball End Mill: 0.025″ Dia, 0.038″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 3/8'' Dia, 0.57'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.03″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Corner Radius End Mill: 0.2362″ Dia, 0.6299″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: KDMT0605ERGC, KCPH15, N/A Finish, 0.2362″ OAW
• Corner Radius End Mill: 0.2362″ Dia, 0.6299″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.02″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Point Tap: 3/8-24, UNF & DIN 371, 3 Flutes, Plug, 2B, HSS-E, TiN Finish 20 mm Thread Length, 100 mm OAL, Right Hand, Series TC216
• Milling Insert: KDMT0810ERGC, KCPH15, N/A Finish, 0.3150″ OAW
• Process Scales & Balance Scales; System Of Measurement: Kilograms; Calibration: External; Display Type: LCD; Capacity: 15.000; Platform Length: 6.3 in; Platform Width: 7.1 in
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/4″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1035
• Milling Insert: KDMT1010ERGC, KCPH15, N/A Finish, 0.3937″ OAW
• Ball End Mill: 0.024″ Dia, 0.072″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.02″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Ball End Mill: 0.125″ Dia, 0.125″ LOC, 3 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4630
• Chucking Reamer: 0.2185″ Dia, 5″ OAL, 1-1/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.025″ Dia, 0.075″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Straight Flutes Tap: Metric Fine, 4 Flutes, Taper, 6H, High Speed Steel, TiN Finish 1-13/16″ Thread Length, Right Hand, D6, Series 757
• Personal & Medical Digital & Beam Scales; Scale Type: Chair Scale; Display Type: 5-Digit LCD; Capacity (Lb.): 660; Capacity (Kg): 330; Graduation: .2; Overall Height (Inch): 36
• Chucking Reamer: 0.207″ Dia, 5″ OAL, 1-1/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spiral Point Tap: MF10 x 1.25, MF & DIN 374, 3 Flutes, Plug, 6H, HSS-E, TiN Finish 20 mm Thread Length, 100 mm OAL, Right Hand, Series TC216
• Square End Mill: 5/16'' Dia, 13/16'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8200
• Turning Insert
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Chamfer Mill: 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Chamfer Mill: 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 2.174″ OD, 6.5″ Free Length 0.177″ Wire Dia, 90.73 lb Max Load, 22.47 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 0.881″ OD, 5.75″ Free Length 0.098″ Wire Dia, 32.259 lb Max Load, 11.871 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 3.5″ Free Length 0.225″ Wire Dia, 272.973 lb Max Load, 295.667 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Gray Double-Sided Foam Tape: 1″ Wide, 5 yd Long, 25 mil Thick, Acrylic Adhesive
• Compression Spring: 1.821″ OD, 3.25″ Free Length 0.225″ Wire Dia, 208.569 lb Max Load, 160.456 lb/in Spring Rate, Music Wire
• Boring Bar: 6 mm Min Bore, 3 mm Max Depth, Right Hand Cut, Carbide 3.90 mm Shank Dia, 49.80 mm OAL, 0.03 mm Corner Radius
• Cord Stock; Shape: Round; System of Measurement: Metric; Tensile Strength (psi): 725; Coil Length (Feet): 50; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Hook & Loop; Shape: Square; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 1; Component Type: Dual Lock; Number Of Pieces: 100.000
• Compression Spring: 1.41″ OD, 6.5″ Free Length 0.112″ Wire Dia, 29.616 lb Max Load, 7.867 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.881″ OD, 6.5″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 3.388 lb/in Spring Rate, Music Wire
• Compression Spring: 1.116″ OD, 1.75″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 207.728 lb/in Spring Rate, Stainless Steel
• Process Scales & Balance Scales; System Of Measurement: Grams; Calibration: External; Display Type: LCD; Capacity: 6200.000; Platform Length: 6.3 in; Platform Width: 7.1 in
• Spiral Flute Tap: M12 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Compression Spring: 2.056″ OD, 4.75″ Free Length 0.192″ Wire Dia, 87.066 lb Max Load, 39.652 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 2.625″ Free Length 226.432 lb Max Load, 432.123 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Corner Radius End Mill: 0.0157″ Dia, 0.0236″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• Milling Inserts; Insert Style: XRAA; Insert Size: 13005; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 1/8; Thickness (Inch): 1/8; Length Range (Decimal Inch): 0.4000 to 0.4500; Series: XRAA; Coating/Finish: TiAlN; Length (Deci
• Combo Drill & Countersink: #8, 5/8″ Body Dia, 118 ™, High Speed Steel Bright (Polished) Finish, 5/16″ Point Dia, 5/16″ Point Length, 6″ OAL
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Milling Inserts; Insert Style: XRAA; Insert Size: 13010; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 1/8; Thickness (Inch): 1/8; Length Range (Decimal Inch): 0.4000 to 0.4500; Series: XRAA; Coating/Finish: TiAlN; Length (Deci
• Corner Radius End Mill: 0.0157″ Dia, 0.0236″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Milling Inserts; Insert Style: XRAA; Insert Size: 25005; Insert Material: Solid Carbide; Material Grade: Micrograin; Width (Inch): 1/8; Thickness (Inch): 1/8; Length Range (Decimal Inch): 0.4000 to 0.4500; Series: XRAA; Coating/Finish: TiAlN; Length (Deci
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 5/16'' Dia, 1-1/8'' LOC, 5/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Spiral Flute, 37 ™ Variable Helix, Centercutting, RH Cut, RH Flute, Series XPV
• O-Ring: 0.801″ ID x 0.941″ OD, 0.07″ Thick, Dash 019, Viton Round Cross Section
• Milling Insert: SPGN150440, KCK20B, Solid Carbide N/A Finish, 0.6250″ OAW
• Milling Insert: SPGN150412, KCK20B, Solid Carbide N/A Finish, 0.6250″ OAW
• Compression Spring: 1.821″ OD, 9.5″ Free Length 0.177″ Wire Dia, 107.424 lb Max Load, 20.357 lb/in Spring Rate, Music Wire
• Compression Spring: 2.174″ OD, 4.25″ Free Length 164.385 lb Max Load, 110.259 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: 9/16-12, High Speed Steel
• Compression Spring: 1.88″ OD, 8″ Free Length 0.162″ Wire Dia, 81.484 lb Max Load, 16.609 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.0492″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Compression Spring: 1.88″ OD, 3.25″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 150.393 lb/in Spring Rate, Music Wire
• O-Ring: 8.984″ ID x 9.262″ OD, 0.139″ Thick, Dash 270, Nitrile Butadiene Rubber Round Cross Section
• Compression Spring: 0.47″ OD, 4.5″ Free Length 0.049″ Wire Dia, 8.735 lb Max Load, 3.626 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.939″ OD, 6.25″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 27.937 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.998″ OD, 6.25″ Free Length 0.177″ Wire Dia, 98.358 lb Max Load, 26.64 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.09″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2010
• Compression Spring: 1.998″ OD, 5″ Free Length 0.192″ Wire Dia, 123.303 lb Max Load, 45.22 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Scale Scoops, Scale Calibration Masses & Scale Accessories; Nominal Mass: 5 g; Material: Stainless Steel; Class: ASTM Class 5; Capacity: 5.000; Shape: Cylindrical
• O-Ring: 0.69″ ID x 1.03″ OD, 0.16″ Thick, Silicone with SS Screen Round Cross Section
• Compression Spring: 1.469″ OD, 4.75″ Free Length 0.192″ Wire Dia, 164.335 lb Max Load, 85.535 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Compression Spring: 1.528″ OD, 4.75″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 78.733 lb/in Spring Rate, Music Wire
• Square End Mill: 0.1181'' Dia, 0.9449'' LOC, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Compression Spring: 0.411″ OD, 5.5″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 2.729 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.586″ OD, 4.75″ Free Length 0.192″ Wire Dia, 153.127 lb Max Load, 72.975 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2.375″ Free Length 0.068″ Wire Dia, 11.893 lb Max Load, 8.373 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 3 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.375″ Dia, 3 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 37 ° Helix, ZrN Coated, Single End, Series 1027 & Alumigator
• Dovetail Cutter: 1 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Woodruff Keyseat Cutter: 0.118″ Cut Dia, 0.047″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 21.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: AlTiN; Seri
• Woodruff Keyseat Cutter: 0.118″ Cut Dia, 0.015″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 3 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/32″ Dia, 9/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Woodruff Keyseat Cutter: 0.118″ Cut Dia, 0.031″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Earplugs: 32 dB, Foam, Bell, Form & Insert, Corded
• Pressure Gauge: 2″ Dial, 0 to 30 psi, 1/8″ Thread, NPT, Center Back Mount Commercial Pressure Gauge, Plastic Case, Brass Wetted Parts, 3-2-3% of Scale Accuracy
• Compression Spring: 0.881″ OD, 6″ Free Length 0.072″ Wire Dia, 17.615 lb Max Load, 4.436 lb/in Spring Rate, Music Wire
• #67, 118° Drill Point, 0.81mm Shank Diam, Fast Spiral Circuit Board Drill Bit 1/2″ Flute Length, 1-1/2″ OAL, Series 300
• Double Angle Milling Cutter: 90 °, 3/16″ Cut Dia, 1/8″ Cut Width, 3″ Shank Dia, Solid Carbide 2″ OAL, Uncoated, 4 Teeth
• Ball End Mill: 0.035″ Dia, 0.425″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Adhesive Glue: 20 g Squeeze Bottle, Black 24 hr Full Cure Time
• Compression Spring: 0.823″ OD, 6.75″ Free Length 0.092″ Wire Dia, 28.99 lb Max Load, 8.992 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.05″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Compression Spring: 2.115″ OD, 4″ Free Length 0.207″ Wire Dia, 143.961 lb Max Load, 69.164 lb/in Spring Rate, Music Wire
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated
• Spiral Point Tap: M6 x 1, JIS B 4430, 3 Flutes, Plug, 6HX, HSS-E-PM, TiAlN Finish 15 mm Thread Length, 62 mm OAL, Right Hand, Series T200
• Compression Spring: 1.41″ OD, 4.75″ Free Length 242.777 lb Max Load, 268.134 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.821″ OD, 6″ Free Length 0.177″ Wire Dia, 107.424 lb Max Load, 32.339 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.25″ Dia, 3 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Compression Spring: 1.175″ OD, 3.25″ Free Length 0.125″ Wire Dia, 47.326 lb Max Load, 32.118 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 3 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Chamfer Mill: 3 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Compression Spring: 0.823″ OD, 5.75″ Free Length 0.098″ Wire Dia, 34.373 lb Max Load, 13.472 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 5″ Free Length 0.105″ Wire Dia, 34.529 lb Max Load, 14.18 lb/in Spring Rate, Stainless Steel
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0484MC
• Screw Machine Length Drill Bit: 0.242″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Compression Spring: 0.411″ OD, 7″ Free Length 0.042″ Wire Dia, 6.457 lb Max Load, 1.671 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.246″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Compression Spring: 0.411″ OD, 5.75″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 2.608 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.175″ OD, 7.5″ Free Length 0.192″ Wire Dia, 145.737 lb Max Load, 77.129 lb/in Spring Rate, Stainless Steel
• Kyocera BDMT 070302ERJT PR1210 Grade PVD Carbide, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron and (S) Titanium Alloy
• Grooving Insert: DB250 TN60, Cermet TiCN & NbC Finish, Right Hand, 6.35 mm Cutting Width, 19 mm Max Depth, Series KDB
• Jobber Length Drill Bit: 0.5″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: M6 x 1.00, Metric Coarse, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, TiCN Finish 0.46″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, D5, Series 719
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Semi-Bottoming, 2BX Class of Fit, Slidur Finish Right Hand Flute, Right Hand Thread, H5 & H6, Series 4653
• Straight Flutes Tap: 9/16-12, UNC, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 1-21/32″ Thread Length, Right Hand, H3, Series 725
• Turning Insert: CCMT32.51CM T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Spiral Flute Tap: 1/2-20, UNF, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H5 & H6, Series 4655
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, TiCN Finish 0.52″ Thread Length, 2.7188″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 781
• Turning Insert: CCMT32.53PM AH725, Solid Carbide TiAlN Finish, Neutral, 3/8″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Corner Radius End Mill: 0.1181″ Dia, 0.315″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: CNMG866EEM AC5005S, Solid Carbide Absotech Finish, 1.0157″ Long, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Series AC5005S
• Turning Insert: CNMG866EMU AC5005S, Solid Carbide Absotech Finish, 1.0157″ Long, 1″ Inscribed Circle, 0.0945″ Corner Radius, 80.0 &deg N/A Series AC5005S
• Rotary & Multi-Tools; Product Type: Tool Only; Batteries Included: No; Speed (RPM): Variable; Oscillation Per Minute: 11,000-20,000; Battery Chemistry: Lithium-ion
• Compression Spring: 2.056″ OD, 3.25″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 126.5 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 12.00; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 8.5; E
• Square End Mill: 1/64'' Dia, 1/16'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.2362″ Dia, 0.7087″ LOC, 2 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Temporary Structure Parts & Accessories; Type: Platform Accessory
• Grooving Insert: GVF100005 PR1225, Solid Carbide Megacoat, Left Hand, 1 mm Cutting Width, 2.2 mm Max Depth, Series GFV
• Temporary Structure Parts & Accessories; Type: Platform Accessory
• Corner Radius End Mill: 0.2362″ Dia, 0.3937″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.175″ OD, 1.75″ Free Length 0.162″ Wire Dia, 93.919 lb Max Load, 184.838 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Turning Insert: CCMT32.50.5PF GH730, Solid Carbide TiCNO Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Turning Insert: CCMT32.52PM GH730, Solid Carbide TiCNO Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Turning Insert: SNGN656S6015 KYHK15B, Ceramic AlTiN Finish, Neutral, 3/4″ Inscribed Circle, N/A Square, Series SNGN
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 7/16'' Dia, 13/16'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Cobalt Single End, Uncoated, Spiral Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.999″ OD, 8″ Free Length 0.192″ Wire Dia, 167.453 lb Max Load, 112.485 lb/in Spring Rate, Stainless Steel
• Turning Insert: SNGN656P8015 KYHK15B, Ceramic AlTiN Finish, Neutral, 3/4″ Inscribed Circle, N/A Square, Series SNGN
• Catches; Type: Snap-In Sealed Magnetic Catch; Length (mm): 54.00; Height (mm): 16.5000; Width (mm): 10.00; Finish/Coating: White; Magnetic Force: 5.7; Minimum Order Quantity: Polypropylene; Material: Polypropylene; Color: White; Material: Polypropylene
• All-Purpose & Utility Hooks; Overall Length (Inch): 43/64; Finish/Coating: Black; Maximum Load Capacity: 22.00; Width (Inch): 1-3/32; Additional Information: Projection: 11 mm; Application: Undermount; Distance Between Mounting Holes: 18 mm; Minimum Order
• Compression Spring: 1.469″ OD, 6.75″ Free Length 0.207″ Wire Dia, 144.862 lb Max Load, 69.912 lb/in Spring Rate, Stainless Steel
• Catches; Type: Snap-In Sealed Magnetic Catch; Length (mm): 54.00; Height (mm): 16.5000; Width (mm): 10.00; Finish/Coating: Black; Magnetic Force: 5.7; Minimum Order Quantity: Polypropylene; Material: Polypropylene; Color: Black; Material: Polypropylene
• Tool Bag & Tote: 23 Pocket 17″ OAW, Polyester
• Slide Bolts; Type: Centered Strike Slide Bolt; Length (mm): 35.00; Width (mm): 32.00; Finish/Coating: Satin; Additional Information: 32 x 15 x 2 mm; Counter Plate Size: 32 x 18 x 6 mm; Weight: 32 g; Screw: 2.7 x 16; Overall Length: 47 mm; Minimum Order Qu
• Tool Aprons & Tool Belts; Tool Type: Tool Rig; Minimum Waist Size: 29; Maximum Waist Size: 46; Material: Polyester; Number of Pockets: 11.000; Color: Black; Minimum Order Quantity: Polyester; Tool Style: Tool Rig; Minimum Waist Size: 29
• Catches; Type: Sealed Magnetic Catch; Length (mm): 63.00; Height (mm): 14.0000; Width (mm): 19.00; Finish/Coating: Light Gray; Magnetic Force: 3.3; Minimum Order Quantity: Polyacetal; Material: Polyacetal; Color: Light Gray; Material: Polyacetal
• Spiral Point Tap: 5/16-18, UNC, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.543″ OAL, Left Hand, X, Series Rekord B
• Compression Spring: 2.174″ OD, 3.25″ Free Length 0.225″ Wire Dia, 176.77 lb Max Load, 114.261 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 5/16-24, UNF, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.543″ OAL, Left Hand, X, Series Rekord B
• Screw Machine Length Drill Bit: 0.0995″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Compression Spring: 2.291″ OD, 3.25″ Free Length 0.225″ Wire Dia, 168.233 lb Max Load, 104.258 lb/in Spring Rate, Music Wire
• Compression Spring: 2.644″ OD, 4.25″ Free Length 0.207″ Wire Dia, 116.342 lb Max Load, 45.522 lb/in Spring Rate, Music Wire
• Open End Wrench: 22 mm x 24 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Square End Mill: 3/16'' Dia, 0.563'' LOC, 3/16'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Square End Mill: 1/64'' Dia, 1/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, RH Cut, RH Flute
• Spiral Point Tap: #10-24, UNC, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 2.756″ OAL, Left Hand, X, Series Rekord B
• Corner Radius End Mill: 0.315″ Dia, 0.6299″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Roughing End Mill
• Spiral Point Tap: #10-32, UNF, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 2.756″ OAL, Left Hand, X, Series Rekord B
• 4-1/2″ Long x 4-1/2″ Wide Grade 1 Steel Full Mortise Ball Bearing Commercial Hinge Satin Chrome Finish, 3 Knuckles, 8 Holes
• O-Ring: 4.489″ ID x 4.629″ OD, 0.07″ Thick, Dash 047, Viton Round Cross Section
• Ball End Mill: 0.125″ Dia, 0.187″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• O-Ring: 5.1″ ID x 5.52″ OD, 0.21″ Thick, Dash 354, Viton Round Cross Section
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Threaded Ring Gage: M3.5 x 0.60 Thread, Metric, Class 6G, Go
• Ball End Mill: 0.0197″ Dia, 0.0591″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 42 ° Helix, Uncoated, Single End
• Threaded Ring Gage: M3.5 x 0.60 Thread, Metric, Class 6G, No Go
• Ball End Mill: 0.078″ Dia, 0.062″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Single End
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Chamfer Mill: 0.375″ Dia, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3″ Shank Dia, AlTiN Coated
• Process Scales & Balance Scales; System Of Measurement: Grams; Calibration: External; Display Type: LCD; Capacity: 3200.000; Platform Length: 6.3 in; Platform Width: 7.1 in
• Chamfer Mill: 0.375″ Dia, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Process Scales & Balance Scales; System Of Measurement: Grams; Calibration: External; Display Type: LCD; Capacity: 620.000; Platform Length: 4.6 in; Platform Width: 4.6 in
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 6 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: RCMT 25 07 M0 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.4921″ Corner Radius, N/A Round, Series RCMT
• Square End Mill: 1/64'' Dia, 0.023'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.25″ Dia, 4 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 2919L
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, Plug, 2B, HSS-E, GLT-1 Finish 3.937″ OAL, Right Hand, H5, Series BU20C300
• Ball End Mill: 0.018″ Dia, 0.054″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• SCMT32.52EGU AC8035P Carbide Turning Insert Absotech Finish, 0.375″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick, 90° Included Angle, Series AC8000P
• Spiral Point Tap: 5/16-24, UNF, 3 Flutes, Plug, VC-10 Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H4, Series 316
• Compression Spring: 1.469″ OD, 7″ Free Length 0.162″ Wire Dia, 76.412 lb Max Load, 25.128 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: #3-56, UNF, 2 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, ZrN Finish 0.5″ Thread Length, 1.8125″ OAL, Right Hand Flute, Right Hand Thread, H2, Series 891
• Spiral Point Tap: 5/16-18, UNC, 3 Flutes, Plug, VC-10 Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H5, Series 316
• Transparent Double-Sided Foam Tape: 1″ Wide, 1 yd Long, 40 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.019″ Dia, 0.057″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Duct Tape: 3/4″ Wide, 10.5 mil Thick, Cotton Cloth Natural Rubber Adhesive, 36 lb/in Tensile Strength
• Spiral Point Tap: 5/16-18, UNC, 3 Flutes, Plug, VC-10 Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H3, Series 316
• Corner Radius End Mill: 0.1969″ Dia, 0.2362″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Spiral Point Tap: 5/16-24, UNF, 3 Flutes, Plug, VC-10 Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H3, Series 316
• Ball End Mill: 0.018″ Dia, 0.054″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Polyester Film Tape: 1/2″ Wide, 10 yd Long, 2.4 mil Thick 26 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• UHMW Film Tape: 1/2″ Wide, 5 yd Long, 10.2 mil Thick 40 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Chucking Reamer: 0.2215″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH