Products

• Jobber Length Drill Bit: 0.0551″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Ball End Mill: 0.01″ Dia, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated
• Compression Spring: 1.528″ OD, 3.25″ Free Length 0.225″ Wire Dia, 244.756 lb Max Load, 236.661 lb/in Spring Rate, Music Wire
• White Double-Sided Urethane Foam Tape: 1″ Wide, 1 yd Long, 62.5 mil Thick, Acrylic Adhesive
• DNMG110404GS CA5515 Carbide Turning Insert TiCl2O3/TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 55° Diamond, Series CA55
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 2.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 3 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Right Hand, 2.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 4.12; Overall Length (mm): 4.12; Material: Metal; Projection: 1.629 in; Finish/Coating: Brushed Nickel; Maximum Load Capacity: 5.00; Minimum Order Quantity: Metal; Material: Me
• Grooving Insert: FTK5 CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 5 mm Cutting Width, 38 mm Max Depth, Series KFTB
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 1.2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 1.25 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 2.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Compression Spring: 0.353″ OD, 4.5″ Free Length 0.068″ Wire Dia, 34.727 lb Max Load, 30.05 lb/in Spring Rate, Music Wire
• Compression Spring: 1.998″ OD, 4.75″ Free Length 0.192″ Wire Dia, 123.303 lb Max Load, 47.809 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 4.25″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 3.549 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 1 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Compression Spring: 1.469″ OD, 2.125″ Free Length 0.162″ Wire Dia, 76.412 lb Max Load, 93.145 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 1.2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 1.25 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• #16, 118° Drill Point, 4.5mm Shank Diam, Fast Spiral Circuit Board Drill Bit 3/4″ Flute Length, 1-1/2″ OAL, Series 300
• Turning Insert: CCGW3255FNA4Q CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Corner Radius End Mill Head: 3/4″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Turning Insert: CCGW32.50FNA5Q CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0039″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 1.45 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 2.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Turning Insert: DCGT32.52FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: CCGW32.51FNA4Q CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Compression Spring: 1.116″ OD, 4.25″ Free Length 0.112″ Wire Dia, 37.008 lb Max Load, 17.605 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCGT3255FNA4Q CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Grooving Insert: GC12 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 3 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Turning Insert: DCGT32.5.5FNA4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Compression Spring: 1.116″ OD, 5.75″ Free Length 0.177″ Wire Dia, 168.625 lb Max Load, 92.664 lb/in Spring Rate, Music Wire
• Turning Insert: CCGT32.50FNA5Q CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0039″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Compression Spring: 1.175″ OD, 4.25″ Free Length 0.112″ Wire Dia, 35.246 lb Max Load, 16.173 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCGT32.51FNA4Q CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: DCGT32.51FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Compression Spring: 1.175″ OD, 4.25″ Free Length 0.207″ Wire Dia, 246.038 lb Max Load, 232.478 lb/in Spring Rate, Music Wire
• Turning Insert: CCGT3255FNA4Q CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: DCGT32.5.5FNA4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: CCGW32.50FNA5Q CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0039″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGT32.51FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Compression Spring: 0.411″ OD, 5.75″ Free Length 0.042″ Wire Dia, 8.117 lb Max Load, 2.345 lb/in Spring Rate, Music Wire
• Turning Insert: DCGT21.5.5FNA4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Rubber Band Strapping; Strapping Type: Standard Office; Number of Pieces: 320; Type: Standard Office
• Compression Spring: 0.411″ OD, 3.75″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 4.729 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M4, Metric, 3 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Chucking Reamer: 0.059″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Damping Stays; Type: Locking Stay with Catch; Capacity: 92.100; Overall Length (mm): 240.6000; Thickness (mm): 2; Width (mm): 36.50; Side: Left Hand; Maximum Opening: 90.000; Finish/Coating: Chrome; Mounting Hole Size Diameter: 3.800; Applications: For Li
• Compression Spring: 1.351″ OD, 6.75″ Free Length 0.162″ Wire Dia, 82.615 lb Max Load, 30.626 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.294″ OD, 5″ Free Length 0.035″ Wire Dia, 5.314 lb Max Load, 2.156 lb/in Spring Rate, Stainless Steel
• Turning Insert: DCGT21.51FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Damping Stays; Type: Locking Stay with Catch; Capacity: 92.100; Overall Length (mm): 240.6000; Thickness (mm): 2; Width (mm): 36.50; Side: Right Hand; Maximum Opening: 90.000; Finish/Coating: Chrome; Mounting Hole Size Diameter: 3.800; Applications: For L
• Turning Insert: DCGT32.52FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Compression Spring: 0.705″ OD, 6.25″ Free Length 0.092″ Wire Dia, 33.459 lb Max Load, 13.117 lb/in Spring Rate, Stainless Steel
• Turning Insert: DCGT21.5.5FNA4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Compression Spring: 0.764″ OD, 2.375″ Free Length 0.148″ Wire Dia, 108.365 lb Max Load, 253.703 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.764″ OD, 9″ Free Length 0.148″ Wire Dia, 144.393 lb Max Load, 69.688 lb/in Spring Rate, Music Wire
• Square End Mill: 1/16'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.25″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Compression Spring: 0.999″ OD, 1.5″ Free Length 0.177″ Wire Dia, 136.296 lb Max Load, 506.948 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.035'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Compression Spring: 1.645″ OD, 3.75″ Free Length 0.135″ Wire Dia, 42.251 lb Max Load, 21.065 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.293″ OD, 3.5″ Free Length 0.225″ Wire Dia, 283.564 lb Max Load, 332.483 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 6″ Free Length 0.04″ Wire Dia, 5.635 lb Max Load, 1.648 lb/in Spring Rate, Stainless Steel
• Square End Mill: 9/64'' Dia, 9/16'' LOC, 3/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.068″ Wire Dia, 11.893 lb Max Load, 11.616 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.175″ OD, 6.75″ Free Length 0.162″ Wire Dia, 126.496 lb Max Load, 47.17 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 6″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 3.677 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Milling Insert: SDHT 0903AESN-F50 CTPM245, CTPM245, Solid Carbide N/A Finish,
• 3/32″ x 25' Buna-N Round Cord Stock 250°F Max, Shore 70A, 2,050 psi Tensile Strength, Black
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GCM4020RG AC8035P, Solid Carbide Absotech Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• TCMT32.52-PM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 5/32″ Thick, 60° Round
• TCMT32.52-UR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 5/32″ Thick, 60° Trigon
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• TCMT32.51-UM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 5/32″ Thick, 60° Triangle
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• TCMT32.51-PM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 5/32″ Thick, 60° Triangle
• Kyocera CCMT 21505GK CA5515 Grade CVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• TCMT32.51-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 5/32″ Thick, 60° Trigon
• Square End Mill: 3/64'' Dia, 1/4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Masking Tape: 60 yd Long, 6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 2.115″ OD, 4.75″ Free Length 0.192″ Wire Dia, 116.813 lb Max Load, 43.557 lb/in Spring Rate, Music Wire
• 100° 1/4″ Diam 2-1/2″ OAL 2-Flute Solid Carbide Spotting Drill Bright/Uncoated, 3/4″ Flute Length, 1/4″ Shank Diam
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 3/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 0.999″ OD, 1.75″ Free Length 0.162″ Wire Dia, 108.601 lb Max Load, 271.733 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.999″ OD, 7″ Free Length 0.162″ Wire Dia, 146.271 lb Max Load, 66.749 lb/in Spring Rate, Music Wire
• 5/8″ Head Diam, 1/4″ Shank Diam, 1 Flute 120° High Speed Steel Countersink Oxide Finish, 2-1/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 15/32'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 220
• Compression Spring: 1.293″ OD, 4″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 193.214 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.68; Load Capacity: 80 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.68; Extension
• 5/8″ Head Diam, 3/8″ Shank Diam, 1 Flute 60° High Speed Steel Countersink Oxide Finish, 2-1/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Spiral Flute Tap: 9/16-18, UNF, 4 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, Bright/Uncoated 1.6563″ Thread Length, 3.5938″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 761
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert CSVG11FRV025 VM1 CARB GROOVING INSERT
• Compression Spring: 1.351″ OD, 7.5″ Free Length 0.105″ Wire Dia, 25.906 lb Max Load, 5.824 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.68; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.68; Extension
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.68; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.68; Extension
• Compression Spring: 2.291″ OD, 8″ Free Length 0.207″ Wire Dia, 95.717 lb Max Load, 25.613 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.88″ OD, 7.5″ Free Length 0.192″ Wire Dia, 130.609 lb Max Load, 33.455 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.68; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.68; Extension
• Compression Spring: 1.41″ OD, 6.25″ Free Length 0.112″ Wire Dia, 29.616 lb Max Load, 8.194 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 19.68; Load Capacity: 100 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.68; Extension
• Square End Mill: 15mm LOC, 5mm Shank Dia, 65mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6481
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 16mm LOC, 6mm Shank Dia, 70mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6481
• Compression Spring: 0.97″ OD, 2.5″ Free Length 0.063″ Wire Dia, 8.772 lb Max Load, 5.614 lb/in Spring Rate, Stainless Steel
• Square End Mill: 14mm LOC, 4mm Shank Dia, 65mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6481
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 15.27; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9.77;
• Corner Radius End Mill: 0.055″ Dia, 0.083″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Tool Pouches & Holsters; Holder Type: Tool Pouch; Tool Type: Small Tools; Material: Polyester; Color: Black; Number of Pockets: 13.000; Minimum Order Quantity: Polyester; Mat: Polyester; Material: Polyester
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headless Drill Bushing: P, 7/8″ ID, 1-1/8″ OD 1-3/8″ OAL, Carbon Steel
• O-Ring: 3-5/8″ ID x 4″ OD, 3/16″ Thick, Dash 342, HNBR Round Cross Section
• Spiral Flute Tap: #8-36, UNF, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 0392
• Press Fit Headless Drill Bushing: P, 7/8″ ID, 1-1/8″ OD 1-1/2″ OAL, Carbon Steel
• Impact Socket: 1″ Drive 6-Point
• Compression Spring: 2.056″ OD, 6.75″ Free Length 173.133 lb Max Load, 73.951 lb/in Spring Rate, Stainless Steel
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Compression Spring: 1.175″ OD, 5.25″ Free Length 0.105″ Wire Dia, 29.61 lb Max Load, 10.342 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GMM5020250R KW10, Solid Carbide Co & WC Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series KGM
• Process Scales & Balance Scales; System Of Measurement: Grams; Calibration: External; Display Type: LCD; Capacity: 1500.000; Platform Length: 6.3 in; Platform Width: 7.1 in
• Turning Insert: CNMM866TUS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866TU T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMG866THS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMG431-38 GH330, Solid Carbide TiCNO Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMM866TU T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Chucking Reamer: 0.108″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Jobber Length Drill Bit: 0.1285″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: CNMM866TRS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Compression Spring: 0.588″ OD, 4.25″ Free Length 0.112″ Wire Dia, 65.988 lb Max Load, 72.485 lb/in Spring Rate, Stainless Steel
• Turning Insert: CNMG432SS AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMM868TUS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.1260″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Compression Spring: 2.233″ OD, 6.25″ Free Length 0.177″ Wire Dia, 88.428 lb Max Load, 22.518 lb/in Spring Rate, Music Wire
• Turning Insert: CNMG432SF AH6225, Solid Carbide TiAlN & TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMM864TUS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0630″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMM866TRS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMG431CM T515, Solid Carbide TiCN & Al2O3 Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMM864TUS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0630″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Turning Insert: CNMG432SF T6120, Solid Carbide TiCN & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMG866THS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Square End Mill: 0.07'' Dia, 1/2'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: CNMM866TUS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Square End Mill: 0.035'' Dia, 0.175'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• DNGA332S0530F 7135 CBN Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 3/16″ Thick
• DNGA331S0530F 7135 CBN Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 3/16″ Thick
• Ball End Mill: 0.085″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.88″ OD, 5.5″ Free Length 0.225″ Wire Dia, 143.301 lb Max Load, 72.51 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.109″ Dia, 0.327″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Compression Spring: 2.35″ OD, 9″ Free Length 0.192″ Wire Dia, 76.638 lb Max Load, 16.308 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.233″ OD, 4.75″ Free Length 0.192″ Wire Dia, 80.477 lb Max Load, 34.776 lb/in Spring Rate, Stainless Steel
• Milling Insert: LNHX 1106PNER CTPK220, CTPK220, Solid Carbide N/A Finish,
• Compression Spring: 1.586″ OD, 4.5″ Free Length 0.192″ Wire Dia, 111.102 lb Max Load, 67.311 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 & 41 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Document Protectors; Document Type: Shop Ticket Holder; Material: Vinyl; Color: Red, White; For Document Width: 9 in; For Document Length: 12 in
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Semi-Bottoming, High Speed Steel-E, TiAlN Finish 3.543″ OAL, Right Hand Flute, Right Hand Thread, H7, Series TC117
• Screw Machine Length Drill Bit: 0.086″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: TNGA331-QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Ball End Mill: 0.055″ Dia, 0.082″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: TNGA330.5-QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 3 Flute, 0.0008″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Ball End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Single End, Series XPB
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 3 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Press Fit Headless Drill Bushing: HM, 5.5″ ID Steel
• Chucking Reamer: 0.1497″ Dia, 2.955″ OAL, 0.7486″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 3 Flute, 0.0008″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Milling Insert: WK10, Solid Carbide N/A Finish,
• Abrasive Bur: Flat 3/8″ Shank, 2-1/2″ OAL
• Compression Spring: 1.88″ OD, 7.5″ Free Length 0.162″ Wire Dia, 60.499 lb Max Load, 15.449 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Engraving Cutter: 900 °, 3/8″ Dia, Pointed, Solid Carbide AlTiN Finish, 3/16″ LOC, 3/8″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Ferrous & Non-Ferrous Metals
• Corner Chamfer End Mill: 0.7874″ Dia, 1.6142″ LOC, 3 Flute, 0.0079″ Chamfer Width, Solid Carbide 4.13 mm OAL, ZrN Coated, Centercutting
• Engraving Cutter: 600 °, 3/8″ Dia, Pointed, Solid Carbide AlTiN Finish, 0.32″ LOC, 3/8″ Shank, 2-1/2″ OAL, 2 Flutes, Use on Ferrous & Non-Ferrous Metals
• Corner Chamfer End Mill: 0.7874″ Dia, 1.6142″ LOC, 3 Flute, 0.0079″ Chamfer Width, Solid Carbide 4.13 mm OAL, Bright/Uncoated, Centercutting
• Compression Spring: 0.588″ OD, 6.25″ Free Length 0.092″ Wire Dia, 39.417 lb Max Load, 19.637 lb/in Spring Rate, Stainless Steel
• Swivel Top Plate Caster: Thermoplastic Rubber, 2-15/16″ Wheel Dia, 15/16″ Wheel Width, 165 lb Capacity, 3-15/16″ OAH 2.375″ Plate Length, 2.38″ Plate Width, No Brake
• Swivel Top Plate Caster: Rubber, 2-1/2″ Wheel Dia, 1-1/16″ Wheel Width, 176 lb Capacity, 3-1/4″ OAH 3.875″ Plate Length, 2.75″ Plate Width, No Brake
• Square End Mills; Number Of Flutes: 3; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Weldon Flat; Flute Type: Helical
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 3 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 5/16″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.078″ Dia, 0.118″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Square End Mill: 0.04'' Dia, 13/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.411″ OD, 6.5″ Free Length 0.04″ Wire Dia, 5.635 lb Max Load, 1.52 lb/in Spring Rate, Stainless Steel
• Turning Insert: SNMM856TUS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Compression Spring: 1.116″ OD, 8.5″ Free Length 0.148″ Wire Dia, 103.512 lb Max Load, 28.561 lb/in Spring Rate, Music Wire
• Square End Mill: 5/64'' Dia, 15/64'' LOC, 1/8'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.411″ OD, 4.75″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 3.168 lb/in Spring Rate, Stainless Steel
• Milling Insert: XDKT 11T308SR-M50 CTPK220, CTPK220, Solid Carbide N/A Finish,
• Turning Insert: SNMM856TU T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, Plug, 3B, Cobalt, GLT-1 Finish 5/8″ Thread Length, 3.937″ OAL, Right Hand, H11, Series BU20C310, BU20C343 & BU20C344
• Square End Mill: 0.1'' Dia, 0.3'' LOC, 1/8'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: XDKT 11T308SR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Compression Spring: 0.411″ OD, 4.25″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 4.16 lb/in Spring Rate, Stainless Steel
• Turning Insert: SNMM856TU T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Turning Insert: SNMM858TUS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.1260″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Compression Spring: 0.47″ OD, 4″ Free Length 0.049″ Wire Dia, 8.735 lb Max Load, 4.09 lb/in Spring Rate, Stainless Steel
• Square End Mill: 5/64'' Dia, 3/4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, Plug, 3B, Cobalt, GLT-1 Finish 3.937″ OAL, Right Hand, H4, Series BU20C310
• Turning Insert: SNMM856TUS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Milling Insert: XDKT 11T320SR-F50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Compression Spring: 0.881″ OD, 2.125″ Free Length 0.072″ Wire Dia, 13.923 lb Max Load, 11.403 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/16'' Dia, 0.186'' LOC, 1/8'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: XDKT 11T325SR-F50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Document Protectors; Document Type: Shop Ticket Holder; Material: Vinyl; Color: White, Blue; For Document Width: 9 in; For Document Length: 12 in
• Ball End Mill: 0.1″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Milling Insert: XDKT 11T308SR-F50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/32″ Dia, 0.074″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Milling Insert: XDKT 11T308SR-F50 CTPP225, CTPP225, Solid Carbide N/A Finish,
• Ball End Mill: 0.125″ Dia, 0.187″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Milling Insert: XDKT 11T320SR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/16″ Dia, 0.05″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Back Chamfers; Cutter Head Diameter (Decimal Inch): 0.1250 in; Included Angle: 90.00; Number of Flutes: 5; Chamfer Width (Decimal Inch): 0.0220 in; Chamfer Width: 0.0220 in; Back Chamfer Material: Solid Carbide; Overall Length (Inch): 1.50; Coated: Uncoat
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Milling Insert: XDKT 11T325SR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Screw Machine Length Drill Bit: 0.238″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Spiral Flute Tap: M3 x 0.50, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D3 & D4,Series 0393
• Corner Radius End Mill: 1/8″ Dia, 1-1/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Milling Insert: RPHX 1204M8SN-F50 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Chamfer Mill: 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Ball End Mill: 0.118″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Chucking Reamer: 0.0984″ Dia, 2.3228″ OAL, 0.6299″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Milling Insert: XDKT 11T308SR-R50 CTCM235, CTCM235, Solid Carbide N/A Finish,
• Ball End Mill: 0.071″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5