Products

• 3/8″ Diam 3-Flute 37° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill Uncoated, 1″ LOC, 2-1/2″ OAL, 3/8″ Shank Diam, Series AL
• Impact Socket: 3/4″ Drive 6-Point
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 3-15/64; Additional Information: Knuckles: 2; Hand: Right; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Materia
• Impact Socket: 3/4″ Drive 6-Point
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 3-15/64; Additional Information: Knuckles: 2; Hand: Left; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Material
• Dark Gray Double-Sided Foam Tape: 3/4″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Impact Socket: 3/4″ Drive 6-Point
• Socket-Mount Leveling Pads & Mounts; Leveling Mount Type: Studded; Thread Size: M12; Base Diameter (Inch): 1-37/64; Load Capacity (Lb.): 660.000; Load Capacity: 300.0; 660.0; Load Capacity (kg): 300.00; Overall Length (Inch): 3-13/16; Overall Length (Deci
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.21; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 11.21; Extension Force:
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.21; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 11.21; Extension Force:
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.21; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 11.21; Extension Force:
• Corner Radius End Mill: 3/4" Dia, 2-1/4" LOC, 0.0600" Radius, 5 Flute, Solid Carbide
• Compression Spring: 0.705″ OD, 4.5″ Free Length 0.105″ Wire Dia, 47.603 lb Max Load, 31.869 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.703″ OD, 9.5″ Free Length 0.225″ Wire Dia, 101.707 lb Max Load, 21.481 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.21; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 11.21; Extension Force:
• Compression Spring: 0.705″ OD, 2.75″ Free Length 0.135″ Wire Dia, 91.644 lb Max Load, 171.917 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.21; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 11.21; Extension Force:
• Compression Spring: 0.411″ OD, 6.25″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 1.327 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 0.75 mm Cutting Width, 1.5 mm Max Depth
• Clear Double-Sided UPVC Tape: 1″ Wide, 5 yd Long, 3.5 mil Thick, Acrylic Adhesive
• O-Ring: 1.6″ ID x 1.56″ OD, 1/4″ Thick, Ethylene Propylene Diene Monomer Round Cross Section
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 0.85 mm Cutting Width, 1.5 mm Max Depth
• White Double-Sided Foam Tape: 1/2″ Wide, 62 mil Thick, Acrylic Adhesive
• Compression Spring: 0.823″ OD, 5.25″ Free Length 0.098″ Wire Dia, 34.373 lb Max Load, 14.805 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.058″ OD, 5.75″ Free Length 0.098″ Wire Dia, 27.141 lb Max Load, 8.722 lb/in Spring Rate, Stainless Steel
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 8.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Deci
• Compression Spring: 1.939″ OD, 3″ Free Length 0.225″ Wire Dia, 196.767 lb Max Load, 155.338 lb/in Spring Rate, Music Wire
• UHMW Film Tape: 3/4″ Wide, 36 yd Long, 5 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Compression Spring: 1.939″ OD, 5.75″ Free Length 0.177″ Wire Dia, 74.281 lb Max Load, 26.544 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M4, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• O-Ring: 2-1/2″ ID x 2-3/4″ OD, 1/8″ Thick, Dash 230, HNBR Round Cross Section
• Compression Spring: 1.586″ OD, 2.5″ Free Length 219.119 lb Max Load, 417.293 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: #8-32, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• O-Ring: 3-1/2″ ID x 3-7/8″ OD, 3/16″ Thick, Dash 341, HNBR Round Cross Section
• Milling Insert: SOHU 1204ABSR-M50 CTCP230, CTCP230, Solid Carbide N/A Finish, 1.0000″ OAW
• Milling Insert: MH20-080425M-M50 4340, 4340, Solid Carbide N/A Finish,
• Milling Insert: MH20-080425M-M50 1130, 1130, Solid Carbide N/A Finish,
• Milling Insert: MH20-080425M-M20 4340, 4340, Solid Carbide N/A Finish,
• Milling Insert: MH20-080425M-M20 1010, 1010, Solid Carbide N/A Finish,
• Milling Insert: MH20-080425M-M20 1130, 1130, Solid Carbide N/A Finish,
• Press Fit Headless Drill Bushing: HM, 8.5″ ID Steel
• Jobber Length Drill Bit: 0.3465″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Press Fit Headless Drill Bushing: HM, 8.6″ ID Steel
• Jobber Length Drill Bit: 0.3504″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Compression Spring: 1.41″ OD, 4.5″ Free Length 0.192″ Wire Dia, 123.786 lb Max Load, 86.257 lb/in Spring Rate, Stainless Steel
• Combo Drill & Countersink: #7, 5/8″ Body Dia, 118 ™, Cobalt Bright (Polished) Finish, 1/4″ Point Dia, 3-1/4″ OAL, Right Hand Cut
• Milling Insert: WSM35S, Solid Carbide N/A Finish,
• Compression Spring: 2.174″ OD, 3.75″ Free Length 0.207″ Wire Dia, 140.256 lb Max Load, 70.981 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.0545″ Dia, 2″ OAL, 7/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Square End Mill: 5/32'' Dia, 3/4'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 22 ° Helix, RH Cut, RH Flute
• Threaded Ring Gage: M7 x 1.00 Thread, Metric, Class 6G, Go
• Compression Spring: 0.881″ OD, 8″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 5.056 lb/in Spring Rate, Stainless Steel
• Threaded Ring Gage: M7 x 1.00 Thread, Metric, Class 6G, No Go
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Chucking Reamer: 0.085″ Dia, 2-1/2″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Compression Spring: 1.88″ OD, 3″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 165.137 lb/in Spring Rate, Music Wire
• Dovetail Cutter: 1 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Ball End Mill: 0.4688″ Dia, 1″ LOC, 2 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 1.937″ OD, 3″ Free Length 0.225″ Wire Dia, 197.71 lb Max Load, 156 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 4.75″ Free Length 0.042″ Wire Dia, 6.457 lb Max Load, 2.477 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.1562″ Dia, 0.47″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Chucking Reamer: 0.072″ Dia, 2″ OAL, 9/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Dovetail Cutter: 1 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Compression Spring: 2.409″ OD, 4.75″ Free Length 0.192″ Wire Dia, 103.145 lb Max Load, 35.677 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 3.5″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 5.076 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.06″ Dia, 2″ OAL, 7/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Dovetail Cutter: 4 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Compression Spring: 1.469″ OD, 4.5″ Free Length 0.192″ Wire Dia, 164.335 lb Max Load, 90.73 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.072″ Wire Dia, 13.923 lb Max Load, 14.065 lb/in Spring Rate, Stainless Steel
• Dovetail Cutter: 4 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Press Fit Headless Drill Bushing: P, 0.07″ ID, 13/64″ OD 3/8″ OAL, Carbon Steel
• Chucking Reamer: 0.0925″ Dia, 2-1/2″ OAL, 11/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Press Fit Headless Drill Bushing: P, 0.1″ ID, 13/64″ OD 3/8″ OAL, Carbon Steel
• Chucking Reamer: 0.118″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Dovetail Cutter: 6 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Compression Spring: 1.528″ OD, 6.75″ Free Length 0.162″ Wire Dia, 99.184 lb Max Load, 27.951 lb/in Spring Rate, Music Wire
• Press Fit Headed Drill Bushing: Type H, #36 ID, 1/4″ OD
• Compression Spring: 1.528″ OD, 4.5″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 83.515 lb/in Spring Rate, Music Wire
• Dovetail Cutter: 2 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Chucking Reamer: 0.068″ Dia, 2″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Press Fit Headed Drill Bushing: Type H, #38 ID, 1/4″ OD
• Dovetail Cutter: 1 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Dovetail Cutter: 4 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Press Fit Headless Drill Bushing: P, 0.09″ ID, 3/16″ OD 3/8″ OAL, Carbon Steel
• Dovetail Cutter: 2 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Press Fit Headless Drill Bushing: P, 17/32″ ID, 3/4″ OD 1-1/2″ OAL, Carbon Steel
• Press Fit Headed Drill Bushing: Type H, 5/8″ ID, 1″ OD
• Chamfer Mill: 0.039″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Dovetail Cutter: 6 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Press Fit Headed Drill Bushing: Type H, 3/4″ ID, 1″ OD
• Dovetail Cutter: 6 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Press Fit Headless Drill Bushing: P, 13/32″ ID, 3/4″ OD 1-1/2″ OAL, Carbon Steel
• Dovetail Cutter: 2 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Press Fit Headed Drill Bushing: Type H, 45/64″ ID, 1″ OD
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Translucent Double-Sided UPVC Tape: 3/4″ Wide, 36 yd Long, 8.5 mil Thick, Acrylic Adhesive
• Boring Bar: 1/4″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Square End Mill: 3/32'' Dia, 0.135'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• 7/16″ OD, 3/16″ Overall Thickness Flexible Grommet Rubber, 1/32″ Slot Width
• Boring Bar: 1/4″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Boring Bar: 0.28″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Square End Mill: 5/64'' Dia, 0.12'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Boring Bar: 0.28″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.004″ Corner Radius
• Spiral Point Tap: MF10 x 1.25, MF & DIN 374, 3 Flutes, Plug, 6H, HSS-E, Steam Oxide Finish 20 mm Thread Length, 100 mm OAL, Right Hand, Series TC216
• Boring Bar: 1/4″ Min Bore, 1.1″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 10.58; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Threaded End; Compressed Length: 7.08; Extensi
• Boring Bar: 1/4″ Min Bore, 1.3″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Combo Drill & Countersink: #2, 3/16″ Body Dia, High Speed Steel Bright (Polished) Finish, 5/64″ Point Dia, 5/64″ Point Length, 6″ OAL, Right Hand Cut
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 10.58; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Threaded End; Compressed Length: 7.08; Extensi
• Boring Bar: 1/4″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Compression Spring: 1.175″ OD, 2.5″ Free Length 0.135″ Wire Dia, 58.097 lb Max Load, 57.509 lb/in Spring Rate, Stainless Steel
• Boring Bar: 0.28″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 4.03; Overall Length (mm): 4.03; Material: Plastic; Projection: 1.6 in; Finish/Coating: Brushed Nickel; Maximum Load Capacity: 4.00; Minimum Order Quantity: Plastic; Material:
• Boring Bar: 0.28″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Ball End Mill: 0.013″ Dia, 0.019″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GV300C KW10, Solid Carbide Co & WC Finish, Right Hand, 3 mm Cutting Width, 4.5 mm Max Depth, Series GVIG
• Chucking Reamer: 0.061″ Dia, 2″ OAL, 7/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Ball End Mill: 0.011″ Dia, 0.016″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Grooving Insert: GV100BR KW10, Solid Carbide Co & WC Finish, Left Hand, 2 mm Cutting Width, 3.2 mm Max Depth, Series GVIG
• Square End Mill: 3/16'' Dia, 1-1/2'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, RH Cut, RH Flute
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Ball End Mill: 0.01″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Milling Insert: T1215, Solid Carbide N/A Finish,
• Compression Spring: 0.881″ OD, 4.25″ Free Length 0.072″ Wire Dia, 17.615 lb Max Load, 6.327 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.5″ Dia, 1″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Ball End Mill: 0.4688″ Dia, 1″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 0.294″ OD, 5″ Free Length 0.04″ Wire Dia, 7.697 lb Max Load, 3.601 lb/in Spring Rate, Stainless Steel
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Chucking Reamer: 0.05″ Dia, 2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Square End Mill: 0.0551'' Dia, 0.2756'' LOC, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Turning Insert: TNMM331-DIA DX120, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMM
• Compression Spring: 2.056″ OD, 3″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 138.901 lb/in Spring Rate, Music Wire
• Milling Insert: T1215, Solid Carbide N/A Finish,
• Micro Boring Bar: 0.0875″ Min Bore, 0.8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL
• Compression Spring: 0.881″ OD, 5.5″ Free Length 0.098″ Wire Dia, 32.259 lb Max Load, 12.431 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.048″ Dia, 2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Compression Spring: 0.999″ OD, 4″ Free Length 0.112″ Wire Dia, 41.068 lb Max Load, 22.793 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 6.75″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 35.22 lb/in Spring Rate, Music Wire
• Milling Insert: SPGN120440, KCK20B, Solid Carbide N/A Finish, 0.5000″ OAW
• Micro Boring Bar: 0.0525″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL
• Compression Spring: 1.821″ OD, 3.75″ Free Length 0.207″ Wire Dia, 165.716 lb Max Load, 97.393 lb/in Spring Rate, Music Wire
• Compression Spring: 1.998″ OD, 3″ Free Length 0.225″ Wire Dia, 191.342 lb Max Load, 146.603 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.1358″ Dia, 130 °, Powdered Metal FIREX Finish, 2.76″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Jobber Length Drill Bit: 0.1201″ Dia, 130 °, Powdered Metal FIREX Finish, 2.56″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Compression Spring: 0.411″ OD, 6.5″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 1.275 lb/in Spring Rate, Stainless Steel
• Milling Insert: WAK15, Solid Carbide N/A Finish,
• Compression Spring: 0.411″ OD, 5″ Free Length 0.042″ Wire Dia, 6.457 lb Max Load, 2.351 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 4.5″ Free Length 0.035″ Wire Dia, 5.314 lb Max Load, 2.4 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M3.50 x 0.60, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Left Hand Flute, Left Hand Thread, D4 & D5, Series 4629
• Turning Insert: TCGT3251FNA5CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Compression Spring: 2.115″ OD, 6″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 25.487 lb/in Spring Rate, Music Wire
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 7.200; Material Grade: Submicron; Maximum Bore Depth (mm): 40.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 66.0000; Finish Coating: TiCN; Serie
• Turning Insert: TCGT3252FNA4CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Square End Mill: 3/16'' Dia, 9/16'' LOC, 3/16'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, 40 ° Helix, Centercutting, RH Cut, RH Flute
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 7.200; Material Grade: Submicron; Maximum Bore Depth (mm): 35.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 61.0000; Finish Coating: TiCN; Serie
• Duct Tape: 3/4″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Boring Bar: 0.08″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL
• Compression Spring: 1.351″ OD, 3.5″ Free Length 0.135″ Wire Dia, 50.962 lb Max Load, 30.947 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.409″ OD, 7.5″ Free Length 149.309 lb Max Load, 50.544 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.09″ Dia, 0.135″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 0.027'' Dia, 0.081'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: DNMG433TM AH110, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0702; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Turning Insert: DNMG432SH AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Turning Insert: TPMR 22 04 08 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMR
• Compression Spring: 2.174″ OD, 6.75″ Free Length 164.385 lb Max Load, 66.155 lb/in Spring Rate, Stainless Steel
• Turning Insert: TPMR 22 04 12 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TPMR
• Turning Insert: DNMG431-28 AH8005, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 0.034'' Dia, 0.051'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.027'' Dia, 0.041'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Chucking Reamer: 0.1988″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Square End Mill: 0.026'' Dia, 0.039'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: #8-32, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Grooving Insert: GMM3020MT KW10, Solid Carbide Co & WC Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Grooving Insert: GMM3020MT KW10, Solid Carbide Co & WC Finish, Right Hand, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• 5/16″ Head Diam, 1/4″ Shank Diam, 6 Flute 82° High Speed Steel Countersink 2″ OAL
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: #8-32, UNJC, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Compression Spring: 1.41″ OD, 3.25″ Free Length 0.225″ Wire Dia, 186.057 lb Max Load, 250.768 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.026'' Dia, 5/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 2; Length (yd): 20.00; Thickness (mil): 2.3000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 46
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 36 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Milling Insert: T1215, Solid Carbide N/A Finish,
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Compression Spring: 0.881″ OD, 5.75″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 3.84 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: T1215, Solid Carbide N/A Finish,
• Square End Mill: 0.027'' Dia, 0.041'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.034'' Dia, 0.051'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/8″ Dia, 5/32″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/8″ Dia, 5/32″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 1/8″ Dia, 5/32″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Square End Mill: 0.026'' Dia, 5/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: BX480, Polycrystalline Cubic Boron Nitride N/A Finish,
• Square End Mill: 1/8'' Dia, 5/32'' LOC, 1/8'' Shank Dia, 2-1/4'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5-LN
• Grooving Insert: TDIME TT9080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TDIM
• Corner Radius End Mill: 0.4724″ Dia, 0.8661″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, AlTiN Coated, Corner Radius End
• Cord Stock; Shape: Round; System of Measurement: Metric; Tensile Strength (psi): 725; Coil Length (Feet): 10; Durometer: 70; Maximum Temperature (F): 350.000; Durometer (Shore A): 70A; Standard; Hardness: Standard
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9593; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Press Fit Headed Drill Bushing: Type H, F ID, 1/2″ OD
• Press Fit Headed Drill Bushing: Type H, 3/16″ ID, 1/2″ OD
• Chucking Reamer: 0.1965″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Square End Mill: 0.315'' Dia, 1.5748'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0237; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.06″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Ball End Mill: 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.25″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Open End Wrench: 17 mm x 19 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Woodruff Keyseat Cutter: 0.187″ Cut Dia, 0.031″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 4 Teeth, Solid Carbide
• O-Ring: 1.487″ ID x 1.693″ OD, 0.103″ Thick, Dash 128, Nitrile Butadiene Rubber Round Cross Section
• Woodruff Keyseat Cutter: 0.1562″ Cut Dia, 0.039″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Jobber Length Drill Bit: 0.2012″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Jobber Length Drill Bit: 0.2031″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Woodruff Keyseat Cutter: 0.1562″ Cut Dia, 0.047″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Compression Spring: 1.821″ OD, 6.75″ Free Length 193.546 lb Max Load, 95.976 lb/in Spring Rate, Stainless Steel
• Boring Bar
• Clear Double-Sided Acrylic Tape: 3/4″ Wide, 5 yd Long, 40 mil Thick, Acrylic Adhesive
• Compression Spring: 1.116″ OD, 9″ Free Length 0.135″ Wire Dia, 60.947 lb Max Load, 16.224 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.939″ OD, 3″ Free Length 0.225″ Wire Dia, 139.244 lb Max Load, 135.077 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.4449″ Dia, 118 °, High Speed Steel TiN Finish, 5.5906″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• translucent Double-Sided Foam Tape: 3/4″ Wide, 36 yd Long, 25 mil Thick, Acrylic Adhesive
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Jobber Length Drill Bit: 0.0122″ Dia, 118 °, High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.45 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Compression Spring: 1.351″ OD, 2.75″ Free Length 0.148″ Wire Dia, 65.078 lb Max Load, 56.924 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.0819″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.25 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Tool Bit Blank: 1/4" Wide, 1-1/8" OAL, C6 Solid Carbide, Triangular
• Square End Mill: 5/16'' Dia, 7/8'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Straight Flute, 0 ° Helix, RH Cut, RH Flute
• Compression Spring: 1.939″ OD, 9.5″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 18.365 lb/in Spring Rate, Music Wire
• Grooving Insert: GC12 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC