Products

• Electronic Outside Micrometer: 1″, Solid Carbide Measuring Face 0.00005″ Resolution, Ratchet Stop Thimble
• Compression Spring: 1.41″ OD, 4.25″ Free Length 0.125″ Wire Dia, 39.821 lb Max Load, 17.831 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.147″ Dia, 130 °, Solid Carbide TiB2 Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 1.586″ OD, 2.625″ Free Length 0.148″ Wire Dia, 55.936 lb Max Load, 45.555 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/32'' Dia, 0.025'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Jobber Length Drill Bit: 0.413″ Dia, 135 °, Cobalt AlTiN Finish, 5.25″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.031″ Dia, 0.156″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Jobber Length Drill Bit: 0.2188″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.88″ OD, 4.25″ Free Length 187.997 lb Max Load, 148.991 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 5.25″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 1.583 lb/in Spring Rate, Stainless Steel
• #42, 118° Drill Point, 2.37mm Shank Diam, Fast Spiral Circuit Board Drill Bit 5/8″ Flute Length, 1-1/2″ OAL, Series 300
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TDIP
• Compression Spring: 2.409″ OD, 6.75″ Free Length 149.309 lb Max Load, 54.588 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.015″ Dia, 0.012″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Bottoming, 2BX Class of Fit, Slidur Finish Right Hand Flute, Right Hand Thread, H5 & H6, Series 4654
• AOET11T316PEFR-S Carbide Milling Insert Absotech Finish, 3.6mm Thick x 12.8mm Wide
• Square End Mill: 1/16'' Dia, 0.186'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• AOET11T324PEFR-S Carbide Milling Insert Absotech Finish, 3.6mm Thick x 12.8mm Wide
• Ball End Mill: 0.047″ Dia, 0.187″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• AOET11T305PEFR-S Carbide Milling Insert Absotech Finish, 3.6mm Thick x 12.8mm Wide
• Chamfer Mill: 0.05″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Square End Mill: 5/64'' Dia, 15/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.764″ OD, 6″ Free Length 0.092″ Wire Dia, 31.069 lb Max Load, 11.661 lb/in Spring Rate, Stainless Steel
• Turning Insert: 1QP-EPGW521 BX470, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0160″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGW
• Compression Spring: 2.056″ OD, 2.875″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 146.061 lb/in Spring Rate, Music Wire
• Chamfer Mill: 0.118″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Square End Mill: 3/32'' Dia, 0.279'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.881″ OD, 6.25″ Free Length 0.092″ Wire Dia, 27.195 lb Max Load, 8.634 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 0.06″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Compression Spring: 1.058″ OD, 9″ Free Length 0.098″ Wire Dia, 27.141 lb Max Load, 5.564 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Turning Insert: 1QP-EPGW520.5 BX470, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0080″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGW
• Compression Spring: 1.351″ OD, 2.625″ Free Length 0.148″ Wire Dia, 65.078 lb Max Load, 59.98 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 2.625″ Free Length 349.474 lb Max Load, 616.709 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.04″ Dia, 0.16″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Turning Insert: 1QP-EPGW4.51.81 BX470, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0160″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGW
• Ball End Mill: 0.03″ Dia, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Ball End Mill: 0.05″ Dia, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• AOET11T302PEFR-S Carbide Milling Insert Absotech Finish, 3.6mm Thick x 12.8mm Wide
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.059″ Cutting Width, Series TDIP
• Grooving Insert: TDIP TT9080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.055″ Cutting Width, Series TDIP
• Compression Spring: 0.764″ OD, 8.5″ Free Length 0.148″ Wire Dia, 144.393 lb Max Load, 73.935 lb/in Spring Rate, Music Wire
• Grooving Insert: TDIPE TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TDIP
• Compression Spring: 2.115″ OD, 9.5″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 16.044 lb/in Spring Rate, Music Wire
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.039″ Cutting Width, Series TDIP
• Compression Spring: 1.469″ OD, 2.625″ Free Length 0.148″ Wire Dia, 60.148 lb Max Load, 51.736 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.078″ Dia, 0.625″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.047″ Cutting Width, Series TDIP
• Grooving Insert: GDM2420GL TN90, Cermet Neutral, 2.4 mm Cutting Width, 17 mm Max Depth, Series KGD
• Square End Mill: 3/8'' Dia, 1-1/4'' LOC, 3/8'' Shank Dia, 3'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 36.5 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.085″ Cutting Width, Series TDIP
• Spiral Point Tap: M10 x 1.25, Metric Fine, 3 Flutes, Plug, 6HX, HSS-E, Sirius Finish 100 mm OAL, Right Hand, D4/D5 Series 4219
• Ball End Mill: 0.04″ Dia, 0.2″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.075″ Dia, 0.113″ LOC, 2 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• 3/4″ Head Diam, 1/2″ Shank Diam, 6 Flute 120° High Speed Steel Countersink ALtima Blaze Finish, 2-3/4″ OAL
• Grooving Insert: TDFXD24 TT9080, Solid Carbide TiAlN & TiN Finish, Left Hand, 0.118″ Cutting Width, Series TDFX
• Corner Chamfer/Corner Radius End Mill 2X6X63X7.5 4FL PVD BULL NOSE SEM
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: TDFXXU-Universal TT9080, Solid Carbide TiAlN & TiN Finish, Right Hand, 0.118″ Cutting Width, Series TDFX
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9375; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 0.999″ OD, 2″ Free Length 0.148″ Wire Dia, 85.888 lb Max Load, 153.227 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.1875″ Dia, 0.57″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.015″ Dia, 0.045″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 60 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.1562″ Dia, 0.47″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Drill Mill: 1/4″ Dia, 3/4″ LOC, 3 Flutes, 60 ° Point, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Finish
• Drill Mill: 1/4″ Dia, 3/4″ LOC, 3 Flutes, 120 ° Point, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Finish
• Square End Mill: 11/32'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9242; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Chucking Reamer: 0.2519″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: CNMG 19 06 16-SM S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• Chucking Reamer: 0.2402″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Turning Insert: SNMG 19 06 16-SM S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Square, Series T-Max P
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Turning Insert: SNMG 19 06 16-SMR S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Square, Series T-Max P
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Compression Flute, RH Cut, RH Flute
• CDE322R010 IN15K P Carbide Milling Insert Uncoated
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 0.025'' Dia, 13/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Rounding End Mills; Mill Diameter (Inch): 1/8; Mill Diameter (Decimal Inch): 0.1250; Number Of Flutes: 3; End Mill Material: Solid Carbide; Radius (Decimal Inch): 0.0100; Shank Type: Cylindrical; Flute Type: Helical Flute; Shank Diameter (Inch): 1/
• Double Angle Milling Cutter: 90 °, 3/16″ Cut Dia, 0.105″ Cut Width, 3/16″ Shank Dia, Solid Carbide 2-1/2″ OAL, AlTiN Coated, 4 Teeth
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: CCGT3252FNA4CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: CCGT3251FNA4CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Woodruff Keyseat Cutter: 0.078″ Cut Dia, 0.031″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Ball End Mill: 0.08″ Dia, 0.12″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: VCGW332FN_A5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Woodruff Keyseat Cutter: 0.078″ Cut Dia, 0.047″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Milling Insert: SDHT 09T308ER-F10 CTCS245, CTCS245, Solid Carbide N/A Finish,
• Turning Insert: VCGT332FN_A5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 8.18; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 5.03; Extensio
• Turning Insert: VCGT331FN_A6 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 8.18; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 5.03; Extensio
• Turning Insert: CCGT3252FNA4CB3, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• VCMT222-PM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 1/8″ Thick, 35° Triangle
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 8.18; Load Capacity: 80 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 5.03; Extensio
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• 5/16″ Head Diam, 1/4″ Shank Diam, 6 Flute 60° Cobalt Countersink TiN Finish, 2″ OAL, Single End, Straight Shank, Right Hand Cut
• Milling Insert: WAK15, Solid Carbide N/A Finish,
• Milling Insert: WXM15, Solid Carbide N/A Finish,
• 5/16″ Head Diam, 1/4″ Shank Diam, 6 Flute 82° Cobalt Countersink TiN Finish, 2″ OAL, Single End, Straight Shank, Right Hand Cut
• Engraving Cutter: 300 °, 1/8″ Dia, 0.01″ Tip Dia, Tipped Off Point, Solid Carbide TiB2 Finish, 0.215″ LOC, 1/8″ Shank, 2″ OAL, 1 Flute, Use on Ferrous & Non-Ferrous Metals
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 25.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 51.0000; Finish Coating: TiCN; Serie
• Engraving Cutter: 600 °, 0.005″ Dia, Tipped Off Point TiB2 Finish, 0.104″ LOC, 1″ Shank, 1-1/2″ OAL, 1 Flute
• Compression Spring: 0.411″ OD, 5.5″ Free Length 0.04″ Wire Dia, 7.087 lb Max Load, 2.07 lb/in Spring Rate, Music Wire
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 16.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 41.0000; Finish Coating: TiCN; Serie
• Square End Mill: 1/32'' Dia, 0.025'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.0787″ Dia, 0.0787″ LOC, 3 Flute, Solid Carbide 60 mm OAL, 6 mm Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4730
• Turning Insert: VCMT220.5PS AH8005, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 35.0 &deg N/A Diamond, Series VCMT
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 25.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 51.0000; Finish Coating: TiCN; Series
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1460; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 0.0787″ Dia, 0.0787″ LOC, 3 Flute, Solid Carbide 60 mm OAL, 6 mm Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4730
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: DCGT11T3015FNFM37, Solid Carbide AlTiN Finish, Neutral, 0.0059″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 4.5700; Material: Steel
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.5″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCrO-MAX Coated, Single End
• Jobber Length Drill Bit: 0.25″ Dia, 130 °, Cobalt TiN Finish, 3.9764″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 657
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0701; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 2.056″ OD, 5.5″ Free Length 0.225″ Wire Dia, 131.827 lb Max Load, 60.99 lb/in Spring Rate, Stainless Steel
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: Fiberglass; PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 4.7000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Compression Spring: 1.351″ OD, 5.75″ Free Length 0.225″ Wire Dia, 193.172 lb Max Load, 147.955 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: #12-24, UNC, 3 Flutes, Plug, 2B, HSS-E, Black Oxide Finish 1-1/16″ Thread Length, 3.1496″ OAL, Right Hand
• Compression Spring: 1.939″ OD, 4.25″ Free Length 182.747 lb Max Load, 139.325 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 13/32″ Dia, 7″ OAL, 1-3/4″ Flute Length, Morse Taper Shank, High Speed Steel 6 Flute, RH
• Convex Radius Cutters; Connection Type: Shank; Cutter Material: Solid Carbide; Relief Style: Profile Ground; Cutter Radius: 0.0312 in; Finish/Coating: Uncoated; Cutter Diameter: 0.3125 in; Cutting Width: 0.0625 in; Weldon Flat: No
• Spiral Point Tap: #12-28, UNF, 3 Flutes, Plug, 2B, HSS-E, Black Oxide Finish 1-1/16″ Thread Length, 3.1496″ OAL, Right Hand
• Ball End Mill: 0.0984″ Dia, 0.1181″ LOC, 2 Flute, Solid Carbide 37.5 mm OAL, 3 mm Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.2812″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Square End Mill: 0.0394'' Dia, 0.0591'' LOC, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 0.1'' Dia, 51/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, 50 ° Variable Helix, RH Cut, RH Flute
• Milling Insert: KDMS2016ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.7874″ OAW
• Spiral Flute Tap: #12-24, UNC, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 0391
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Left Hand Flute, Left Hand Thread, D6 & D7, Series 4629
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/8" Dia, 0.57" LOC, 0.0600" Radius, 4 Flute, Solid Carbide
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 7/16″ Dia, 5/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-3/4″ OAL, 7/16″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 0.0197″ Dia, 0.0276″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.01″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Compression Spring: 0.411″ OD, 4.75″ Free Length 0.04″ Wire Dia, 5.635 lb Max Load, 2.089 lb/in Spring Rate, Stainless Steel
• Double Angle Milling Cutter: 90 °, 1/4″ Cut Dia, 0.135″ Cut Width, 1/4″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Coated, 4 Teeth
• Compression Spring: 0.411″ OD, 4.75″ Free Length 0.042″ Wire Dia, 8.117 lb Max Load, 2.848 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Tapered End Mill: 6 ° per Side, 0.312″ LOC, 3 Flutes, Solid Carbide, Square End 2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• O-Ring: 1.62″ ID x 2.19″ OD, 1/4″ Thick, Silicone with SS Screen Round Cross Section
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 1-37/64; Additional Information: Knuckles: 2; Hand: Right; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Materia
• Compression Spring: 0.411″ OD, 3.25″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 5.478 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.625″ Dia, 4 Flute, Solid Carbide 2-3/4″ OAL, 5/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 1-37/64; Additional Information: Knuckles: 2; Hand: Left; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Material
• Ball End Mill: 0.4375″ Dia, 1″ LOC, 4 Flute, Solid Carbide 2-3/4″ OAL, 7/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Compression Spring: 0.294″ OD, 4.25″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 5.944 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.375″ Dia, 1″ LOC, 4 Flute, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Chamfer Mill: 0.02″ Dia, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, AlTiN Coated
• Compression Spring: 1.821″ OD, 8.5″ Free Length 0.225″ Wire Dia, 147.595 lb Max Load, 48.531 lb/in Spring Rate, Stainless Steel
• Press Fit Headed Drill Bushing: Type H, 1/8″ ID, 5/16″ OD
• Ball End Mill: 0.125″ Dia, 1.5″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Ball End Mill: 0.125″ Dia, 0.107″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated, Single End
• Catches; Type: Long Stroke Non-Magnetic Touch Latch; Length (mm): 77.50; Height (mm): 16.0000; Width (mm): 45.00; Finish/Coating: White; Strike Length: 52.00; Strike Width: 15.00; Minimum Order Quantity: PBT; Glass-Filled Polyamide; Material: PBT; Glass-F
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 1/2'' Dia, 1'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 60 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.998″ OD, 7.5″ Free Length 0.192″ Wire Dia, 123.303 lb Max Load, 30.147 lb/in Spring Rate, Music Wire
• 120° 3mm Diam 48mm OAL 2-Flute Solid Carbide Spotting Drill EgiAs Finish, 9mm Flute Length, 3mm Shank Diam, RH Cut, Series 5190
• Swivel Top Plate Caster: Polyurethane, 6″ Wheel Dia, 2″ Wheel Width, 661 lb Capacity, 7-3/8″ OAH 4″ Plate Length, 4.5″ Plate Width, No Brake
• 1/4″ Diam 5-Flute 35/38° Solid Carbide 0.005″ Corner Chamfer Roughing & Finishing End Mill AlCr Finish, 3/4″ LOC, 2-1/2″ OAL, 1/4″ Shank Diam, Centercutting, Standard Length
• Square End Mill: 5/16'' Dia, 1'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Compression Spring: 0.411″ OD, 4.5″ Free Length 0.042″ Wire Dia, 8.117 lb Max Load, 3.009 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 2″ Free Length 0.055″ Wire Dia, 13.6 lb Max Load, 16.635 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.125″ Free Length 0.055″ Wire Dia, 13.6 lb Max Load, 15.603 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.235″ OD, 3″ Free Length 0.047″ Wire Dia, 14.493 lb Max Load, 21.257 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.116″ OD, 8″ Free Length 0.148″ Wire Dia, 103.512 lb Max Load, 30.415 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 4.75″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 1.638 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 5″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 1.555 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 4″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 6.323 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XRBA; Insert Size: 32005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XRBA; Coating/Finish: H-Coating;
• Milling Inserts; Insert Style: XRBA; Insert Size: 32010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XRBA; Coating/Finish: H-Coating;
• Jobber Length Drill Bit: 0.1378″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Milling Inserts; Insert Style: XRBA; Insert Size: 32020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XRBA; Coating/Finish: H-Coating;
• Corner Radius End Mill: 1/8" Dia, 1/4" LOC, 0.0300" Radius, 5 Flute, Solid Carbide
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Milling Inserts; Insert Style: XB2N; Insert Size: 320; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2500 to 0.3500; Length Range (Decimal Inch): 0.9000 to 1.0000; Series: XB2N; Coating/Finish: H-Coating; Wi
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 2.056″ OD, 7.5″ Free Length 0.192″ Wire Dia, 119.999 lb Max Load, 28.753 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.2894″ Dia, 120 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1100
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Screw Machine Length Drill Bit: 0.2362″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series R458
• Chamfer Mill: 0.25″ Dia, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, TiB2 Coated
• Grooving Insert: GMM8030080MW KW10, Solid Carbide Co & WC Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series KGM
• Polyester Film Tape: 1-1/2″ Wide, 18 yd Long, 3.3 mil Thick 50 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 1.821″ OD, 3″ Free Length 0.225″ Wire Dia, 208.569 lb Max Load, 176.187 lb/in Spring Rate, Music Wire
• Duct Tape: 1″ Wide, 7.2 mil Thick, Aluminum Foil Acrylic Adhesive, 59 lb/in Tensile Strength
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Compression Spring: 2.056″ OD, 9.5″ Free Length 0.177″ Wire Dia, 95.708 lb Max Load, 16.751 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.375″ Dia, 0.875″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Combo Drill & Countersink: #4, 5/16″ Body Dia, 118 ™, High Speed Steel TiN Finish, 1/8″ Point Dia, 1/8″ Point Length, 2-1/8″ OAL, Right Hand Cut
• UHMW Film Tape: 3/4″ Wide, 36 yd Long, 10 mil Thick 60 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Compression Spring: 1.586″ OD, 4.5″ Free Length 35.581 lb Max Load, 14.094 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.586″ OD, 2.5″ Free Length 315.419 lb Max Load, 479.887 lb/in Spring Rate, Music Wire
• Aluminum Door Hinge: 3.15″ Wide, 4 Mounting Holes Die-Cast & Zinc, Black Powder Coated
• Compression Spring: 0.411″ OD, 6.25″ Free Length 0.038″ Wire Dia, 6.143 lb Max Load, 1.526 lb/in Spring Rate, Music Wire
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 0.411″ OD, 6.75″ Free Length 0.038″ Wire Dia, 6.143 lb Max Load, 1.412 lb/in Spring Rate, Music Wire
• Compression Spring: 2.174″ OD, 6″ Free Length 0.177″ Wire Dia, 66.591 lb Max Load, 21.269 lb/in Spring Rate, Stainless Steel
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 0.411″ OD, 5″ Free Length 0.04″ Wire Dia, 7.087 lb Max Load, 2.281 lb/in Spring Rate, Music Wire
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 2.291″ OD, 3.75″ Free Length 0.207″ Wire Dia, 95.717 lb Max Load, 56.654 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: 7/16-20, UNF, 3 Flutes, Plug, 2B/3B, High Speed Steel, Steam Oxide Finish 1-7/16″ Thread Length, 3-5/32″ OAL, Right Hand, H3, Series 751
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Compression Spring: 0.411″ OD, 5″ Free Length 0.042″ Wire Dia, 8.117 lb Max Load, 2.703 lb/in Spring Rate, Music Wire
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Inch; Head Type: Offset; Box End Type: 12-Point; Wrench Size (Decimal Inch): 0.2190; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Le
• Compression Spring: 0.411″ OD, 2.5″ Free Length 0.051″ Wire Dia, 11.056 lb Max Load, 9.783 lb/in Spring Rate, Stainless Steel
• DPMT3253MP KCS10B Carbide Turning Insert AlTiN Finish, 3/8″ Inscribed Circle, 0.047″ Corner Radius, 0.1563″ Thick, 55° Diamond
• Square End Mill: 7/32'' Dia, 1/2'' LOC, 1/4'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide DLC Finish, 45 ° Helix, Centercutting, Series AL3F
• DPMT3251MP KCS10B Carbide Turning Insert AlTiN Finish, 3/8″ Inscribed Circle, 1/64″ Corner Radius, 55° Diamond