Products

• Compression Spring: 0.294″ OD, 1.625″ Free Length 0.055″ Wire Dia, 18.275 lb Max Load, 45.936 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 2 mm Cutting Width, 4 mm Max Depth
• Countersinks; Head Diameter (mm): 8.30; Included Angle: 90; Number Of Flutes: 3; Tool Material: Cobalt Steel; Cutting Direction: Right Hand; Minimum Cutting Diameter (mm): 2.00; Shank Diameter (mm): 6.00; Overall Length (mm): 50; Shank Type: Straight; Too
• Combo Drill & Countersink: Metric, High Speed Steel TiN Finish, Right Hand Cut, Series 614
• Grooving Insert: GMM5020040MS PR930, Solid Carbide TiCN Finish, Neutral, 5 mm Cutting Width, 25 mm Max Depth, Series KGM
• Corner Radius End Mill: 0.0591″ Dia, 0.0866″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.116″ OD, 2.375″ Free Length 0.135″ Wire Dia, 60.947 lb Max Load, 67.284 lb/in Spring Rate, Stainless Steel
• Swivel Top Plate Caster: Rubber, 2-15/16″ Wheel Dia, 1-1/4″ Wheel Width, 209 lb Capacity, 3-13/16″ OAH 3.125″ Plate Length, 4.13″ Plate Width, No Brake
• Milling Insert: XDKT 070304SR-M50 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0787″ Dia, 0.0984″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill:
• Door Closer Accessories; Type: Door Position Switch; For Use With: Metal Doors & Frames; Color: White; Series: DPS; Type: Door Position Switch; Accessory Type: Door Position Switch; For Use With: Metal Doors & Frames
• Compression Spring: 0.411″ OD, 4.75″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 1.753 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.25″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 8.019 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.75″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 5.55 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 5.75″ Free Length 0.049″ Wire Dia, 12.443 lb Max Load, 4.105 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 2.125″ Free Length 0.051″ Wire Dia, 11.056 lb Max Load, 11.596 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9596; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 0.47″ OD, 2.375″ Free Length 0.047″ Wire Dia, 7.781 lb Max Load, 6.045 lb/in Spring Rate, Stainless Steel
• CNMG866EME AC8020P Carbide Turning Insert Absotech Finish, 1.0157″ Long, 1″ Inscribed Circle, 0.0945″ Corner Radius, 0.3748″ Thick, Series AC8020P
• Compression Spring: 0.411″ OD, 1.5″ Free Length 0.055″ Wire Dia, 13.6 lb Max Load, 22.619 lb/in Spring Rate, Stainless Steel
• CNMG866EMU AC8020P Carbide Turning Insert Absotech Finish, 1.0157″ Long, 1″ Inscribed Circle, 0.0945″ Corner Radius, 0.3748″ Thick, Series AC8020P
• Compression Spring: 0.97″ OD, 1.5″ Free Length 0.063″ Wire Dia, 8.772 lb Max Load, 9.696 lb/in Spring Rate, Stainless Steel
• Door Closer Accessories; For Use With: Stop Applied Hardware; Body Length: 5; Finish/Coating: Black; Prime Coat; For Use With: Stop Applied Hardware
• Ball End Mill: 0.25″ Dia, 0.25″ LOC, 2 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• CNMG866EEM AC8020P Carbide Turning Insert Absotech Finish, 1.0157″ Long, 1″ Inscribed Circle, 0.0945″ Corner Radius, 0.3748″ Thick, Series AC8020P
• Compression Spring: 0.881″ OD, 3.25″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 6.924 lb/in Spring Rate, Music Wire
• Square End Mill: 3/16'' Dia, 13/64'' LOC, 1/4'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 3; Length (yd): 20.00; Thickness (mil): 2.3000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 46
• Screw Machine Length Drill Bit: 0.3438″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 0.881″ OD, 2.875″ Free Length 0.072″ Wire Dia, 17.615 lb Max Load, 9.512 lb/in Spring Rate, Music Wire
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 1.000; Material Grade: Submicron; Maximum Bore Depth (mm): 4.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 25.7500; Finish Coating: TiCN; Series
• Square End Mill: 0.092'' Dia, 0.276'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 1.000; Material Grade: Submicron; Maximum Bore Depth (mm): 6.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 25.7500; Finish Coating: TiCN; Series:
• Compression Spring: 0.823″ OD, 6″ Free Length 0.092″ Wire Dia, 28.99 lb Max Load, 10.152 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.085'' Dia, 0.255'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.235″ OD, 2.875″ Free Length 0.045″ Wire Dia, 12.909 lb Max Load, 18.034 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.588″ OD, 4″ Free Length 0.112″ Wire Dia, 65.988 lb Max Load, 77.284 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.235″ OD, 2.625″ Free Length 0.047″ Wire Dia, 14.493 lb Max Load, 24.407 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.068'' Dia, 0.204'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.294″ OD, 4.25″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 1.834 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.174″ OD, 5.75″ Free Length 0.177″ Wire Dia, 90.73 lb Max Load, 25.593 lb/in Spring Rate, Music Wire
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 1.700; Material Grade: Submicron; Maximum Bore Depth (mm): 6.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series
• Compression Spring: 0.294″ OD, 3.5″ Free Length 0.038″ Wire Dia, 6.679 lb Max Load, 4.236 lb/in Spring Rate, Stainless Steel
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 1.000; Material Grade: Submicron; Maximum Bore Depth (mm): 6.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 25.7500; Finish Coating: TiCN; Series
• Compression Spring: 0.823″ OD, 7″ Free Length 0.162″ Wire Dia, 172.573 lb Max Load, 113.6 lb/in Spring Rate, Music Wire
• TCMT1.81.51-UF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 7/32″ Inscribed Circle, 0.0156″ Corner Radius, 3/32″ Thick, 60° Triangle
• Compression Spring: 0.294″ OD, 3.75″ Free Length 0.038″ Wire Dia, 6.679 lb Max Load, 3.948 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1151; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 1.500; Material Grade: Submicron; Maximum Bore Depth (mm): 9.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series:
• TCMT1.81.51-UM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 7/32″ Inscribed Circle, 0.0156″ Corner Radius, 3/32″ Thick, 60° Triangle
• Compression Spring: 0.294″ OD, 3.5″ Free Length 0.04″ Wire Dia, 7.697 lb Max Load, 5.18 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.025'' Dia, 0.175'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.528″ OD, 5.25″ Free Length 0.177″ Wire Dia, 126.675 lb Max Load, 51.125 lb/in Spring Rate, Music Wire
• TCMT1.21.21-UF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 5/32″ Inscribed Circle, 0.0156″ Corner Radius, 0.078″ Thick, 60° Triangle
• Polyester Film Tape: 2″ Wide, 10 yd Long, 6.5 mil Thick 110 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1199; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 1/4″ Dia, 1/4″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: TCMT 09 02 08-UM 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Triangle, Series TCMT-UM
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.02″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Nano Finish
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/16″ Dia, 0.2″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.2″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.2″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 0.3937'' Dia, 0.9843'' LOC, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/4″ Dia, 1/4″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.1094″ Dia, 0.375″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Compression Spring: 0.411″ OD, 5.5″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 1.147 lb/in Spring Rate, Stainless Steel
• Milling Insert: XDKT 200716ER-M50 CTPK220, CTPK220, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 1/4″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• 140° 1/16″ Diam 1-1/2″ OAL 2-Flute Solid Carbide Spotting Drill Bright/Uncoated, 0.186″ Flute Length, 1/8″ Shank Diam
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.125″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Compression Spring: 0.411″ OD, 4″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 2.088 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.0394″ Dia, 0.1575″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Nano Coated, Single End
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, AlTiN Coated
• Solid Counterbores; Cutter Diameter (Decimal Inch): 0.1968; Shank Diameter (Inch): 1/4; Flute Length (Decimal Inch): 0.7500; Overall Length (Inch): 2-1/2; Material: Solid Carbide; Number of Flutes: 4
• Corner Radius End Mill: 3/16″ Dia, 0.15″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Compression Spring: 0.411″ OD, 2.375″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 7.579 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 6.25″ Free Length 0.047″ Wire Dia, 11.089 lb Max Load, 3.23 lb/in Spring Rate, Music Wire
• Rigid Top Plate Caster: Thermoplastic Rubber, 5″ Wheel Dia, 1-1/4″ Wheel Width, 298 lb Capacity, 6-1/8″ OAH 2.9375″ Plate Length, 4.13″ Plate Width, No Brake
• Compression Spring: 0.411″ OD, 6.5″ Free Length 0.049″ Wire Dia, 12.443 lb Max Load, 3.624 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 9.5″ Free Length 0.135″ Wire Dia, 89.033 lb Max Load, 22.176 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 5.75″ Free Length 0.051″ Wire Dia, 13.895 lb Max Load, 4.777 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M10 x 1.50, Metric Coarse, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, ZrN Finish 1.25″ Thread Length, 2.9375″ OAL, Right Hand Flute, Right Hand Thread, D6, Series 892
• Compression Spring: 1.293″ OD, 3.75″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 207.694 lb/in Spring Rate, Music Wire
• Compression Spring: 0.47″ OD, 4.5″ Free Length 0.04″ Wire Dia, 6.238 lb Max Load, 2.079 lb/in Spring Rate, Music Wire
• Compression Spring: 1.821″ OD, 2.875″ Free Length 0.225″ Wire Dia, 208.569 lb Max Load, 185.269 lb/in Spring Rate, Music Wire
• Compression Spring: 0.97″ OD, 1.25″ Free Length 0.063″ Wire Dia, 8.772 lb Max Load, 11.854 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.055″ Dia, 0.165″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 0.235″ OD, 2.375″ Free Length 0.047″ Wire Dia, 14.493 lb Max Load, 27.082 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 6.5″ Free Length 0.162″ Wire Dia, 102.916 lb Max Load, 31.236 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 3.75″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 2.082 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 4655
• Ball End Mill: 0.05″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Screw Machine Length Drill Bit: 0.2717″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Milling Insert: SDNT 0903AESN-29 CTCP230, CTCP230, Solid Carbide N/A Finish,
• Compression Spring: 1.469″ OD, 2.5″ Free Length 337.338 lb Max Load, 585.93 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 3″ Free Length 0.035″ Wire Dia, 5.314 lb Max Load, 3.628 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.2559″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Milling Insert: SDNT 0903AESN-29 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Compression Spring: 0.294″ OD, 3″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 8.491 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.2598″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.035″ Dia, 0.052″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Screw Machine Length Drill Bit: 0.3031″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Screw Machine Length Drill Bit: 0.315″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Milling Insert: SDHT 09T308SR TCM10, TCM10, Cermet N/A Finish,
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9378; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 0.06″ Dia, 0.18″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8928; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.116″ OD, 2.875″ Free Length 0.125″ Wire Dia, 49.667 lb Max Load, 40.279 lb/in Spring Rate, Stainless Steel
• 4.2mm, 165° Drill Point, 3.175mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• #18, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 0.48″ Flute Length, 1-1/2″ OAL, Series 306
• Jobber Length Drill Bit: 0.316″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 2.233″ OD, 5.75″ Free Length 0.177″ Wire Dia, 88.428 lb Max Load, 24.605 lb/in Spring Rate, Music Wire
• Open End Wrench: Single End Head, 36 mm 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Compression Spring: 2.233″ OD, 3.5″ Free Length 0.207″ Wire Dia, 136.734 lb Max Load, 73.415 lb/in Spring Rate, Music Wire
• Compression Spring: 0.353″ OD, 3.25″ Free Length 0.068″ Wire Dia, 34.727 lb Max Load, 42.113 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 4.75″ Free Length 0.192″ Wire Dia, 230.793 lb Max Load, 225.649 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.03″ Dia, 0.045″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.058″ OD, 6.75″ Free Length 0.092″ Wire Dia, 22.86 lb Max Load, 5.95 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 7″ Free Length 0.105″ Wire Dia, 25.906 lb Max Load, 6.253 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 8″ Free Length 0.148″ Wire Dia, 86.714 lb Max Load, 20.852 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 4.25″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 105.61 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 4″ Free Length 0.042″ Wire Dia, 8.117 lb Max Load, 3.393 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 2.625″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 5.823 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.5″ Free Length 0.049″ Wire Dia, 9.902 lb Max Load, 8.398 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.47″ OD, 3.25″ Free Length 0.045″ Wire Dia, 6.894 lb Max Load, 3.755 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.97″ OD, 1.75″ Free Length 0.063″ Wire Dia, 8.772 lb Max Load, 8.205 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.235″ OD, 3″ Free Length 0.045″ Wire Dia, 12.909 lb Max Load, 17.259 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 3.5″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 7.249 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, 2-3 P, 3B Class of Fit, High Speed Steel-E, GLT-1 Finish 3.543″ OAL, Left Hand Flute, Left Hand Thread, X, Series Enorm Z
• Compression Spring: 1.116″ OD, 1.875″ Free Length 0.148″ Wire Dia, 77.685 lb Max Load, 129.039 lb/in Spring Rate, Stainless Steel
• Translucent Double-Sided Rubber Tape: 3/4″ Wide, 49 yd Long, 16 mil Thick, Rubber Resin Adhesive
• Square End Mill: 0.055'' Dia, 0.165'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.764″ OD, 3.75″ Free Length 0.112″ Wire Dia, 52.54 lb Max Load, 42.315 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.823″ OD, 7.5″ Free Length 0.085″ Wire Dia, 23.393 lb Max Load, 6.042 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.823″ OD, 3.75″ Free Length 0.112″ Wire Dia, 49.119 lb Max Load, 35.868 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 0.588″ OD, 4.5″ Free Length 0.105″ Wire Dia, 55.816 lb Max Load, 50.184 lb/in Spring Rate, Stainless Steel
• Polyimide Film Tape: 3/8″ Wide, 36 yd Long, 2.7 mil Thick 33 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Compression Spring: 1.939″ OD, 9″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 19.45 lb/in Spring Rate, Music Wire
• Compression Spring: 1.469″ OD, 4.25″ Free Length 38.293 lb Max Load, 16.753 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 4.25″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 88.916 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series 6962
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, nano-Si Coated, Corner Radius End, Centercutting, Series 6964
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, nano-Si Coated, Corner Radius End, Centercutting, Series 6964
• Compression Spring: 1.645″ OD, 3.5″ Free Length 0.135″ Wire Dia, 42.251 lb Max Load, 22.696 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series 6962
• Rigid Top Plate Caster: Elastic Rubber, 4-15/16″ Wheel Dia, 1-9/16″ Wheel Width, 220 lb Capacity, 6-1/8″ OAH 3.375″ Plate Length, 4.06″ Plate Width, No Brake
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 0.58 mm Max Depth, Series 25669
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 1 mm Max Depth, Series 25675
• Corner Radius End Mill Head: 3/8″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 1.16 mm Max Depth, Series 25669
• Compression Spring: 1.939″ OD, 8.5″ Free Length 263.062 lb Max Load, 75.105 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2.875″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 65.147 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill Head: 3/8″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 0.9 mm Max Depth, Series 25674
• Compression Spring: 1.821″ OD, 3.5″ Free Length 0.207″ Wire Dia, 165.716 lb Max Load, 105.282 lb/in Spring Rate, Music Wire
• Chamfer Mill: 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Bright/Uncoated
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 1.2 mm Max Depth, Series 25675
• 3/32″ Diam 270° Wrap Angle 2mm LOC 2-Flute AlTiN Finish Undercut End Mill 1/8″ Shank Diam, 1-1/2″ OAL, 0.0469″ Radius, Solid Carbide
• Compression Spring: 1.88″ OD, 5.5″ Free Length 0.177″ Wire Dia, 104.224 lb Max Load, 33.653 lb/in Spring Rate, Music Wire
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 0.86 mm Max Depth, Series 25668
• Compression Spring: 1.88″ OD, 9″ Free Length 0.177″ Wire Dia, 104.224 lb Max Load, 20.449 lb/in Spring Rate, Music Wire
• Square End Mill: 0.085'' Dia, 3/4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 1.48 mm Max Depth, Series 25668
• Compression Spring: 1.88″ OD, 2.875″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 173.649 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 0.8 mm Max Depth, Series 25675
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 1 mm Max Depth, Series 25674
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.1181″ Dia, 0.5906″ LOC, 4 Flute, Solid Carbide 38 mm OAL, 3 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 1.4 mm Max Depth, Series 25675
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 1.469″ OD, 5.25″ Free Length 0.177″ Wire Dia, 131.397 lb Max Load, 55.224 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.1181″ Dia, 0.5906″ LOC, 3 Flute, Solid Carbide 38 mm OAL, 3 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 1.2 mm Max Depth, Series 25674
• Milling Insert: SFKT 0903AFSR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 0.9 mm Max Depth, Series 25675
• Compression Spring: 1.586″ OD, 3.5″ Free Length 0.135″ Wire Dia, 43.754 lb Max Load, 23.964 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: SDNT 09T308SR-29 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 1.1 mm Max Depth, Series 25675
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Left Hand, 2.5 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 0.8 mm Max Depth, Series 25674
• Milling Insert: SFKT 0903AFSR-R50 CTPK220, CTPK220, Solid Carbide N/A Finish,
• Clear Double-Sided Acrylic Tape: 1/2″ Wide, 5 yd Long, 20 mil Thick, Acrylic Adhesive
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 0.86 mm Max Depth, Series 25669
• Corner Radius End Mill: 0.031″ Dia, 3/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: SDNT 09T308ER CTPP235, CTPP235, Solid Carbide N/A Finish,
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Right Hand, 2.5 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Grooving Insert: AA, Solid Carbide Firex Finish, Left Hand, 4.2 mm Cutting Width, 1.48 mm Max Depth, Series 25669
• Compression Spring: 2.35″ OD, 8″ Free Length 0.207″ Wire Dia, 93.425 lb Max Load, 24.599 lb/in Spring Rate, Stainless Steel
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 0.58 mm Max Depth, Series 25668
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Right Hand, 2 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Square End Mill: 1/32'' Dia, 1/4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 47 ° Variable Helix, RH Cut, RH Flute
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 1.16 mm Max Depth, Series 25668
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 1.1 mm Max Depth, Series 25674
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Left Hand, 1.5 mm Cutting Width, 2 mm Max Depth, Series GBA
• Compression Spring: 2.761″ OD, 9.5″ Free Length 0.225″ Wire Dia, 99.659 lb Max Load, 20.803 lb/in Spring Rate, Stainless Steel
• Grooving Insert: AA, Solid Carbide Firex Finish, Right Hand, 4.2 mm Cutting Width, 1.4 mm Max Depth, Series 25674
• Compression Spring: 0.411″ OD, 6.5″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 0.969 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Right Hand, 0.5 mm Cutting Width, 1 mm Max Depth, Series GBA
• Compression Spring: 0.97″ OD, 1″ Free Length 0.072″ Wire Dia, 12.693 lb Max Load, 23.291 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Right Hand, 1.45 mm Cutting Width, 2 mm Max Depth, Series GBA
• Compression Spring: 0.235″ OD, 2.875″ Free Length 0.047″ Wire Dia, 14.493 lb Max Load, 22.213 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Left Hand, 1.25 mm Cutting Width, 2 mm Max Depth, Series GBA
• Compression Spring: 0.294″ OD, 3.5″ Free Length 0.035″ Wire Dia, 5.314 lb Max Load, 3.099 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 2.875″ Free Length 0.045″ Wire Dia, 10.636 lb Max Load, 10.274 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Right Hand, 1.25 mm Cutting Width, 2 mm Max Depth, Series GBA
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0617; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Milling Insert: KDMB0750M0ERGC, KCPH15, N/A Finish, 0.7500″ OAW
• Grooving Insert: GBA32F TN620, Cermet TiCN Finish, Left Hand, 1 mm Cutting Width, 2 mm Max Depth, Series GBA
• Turning Insert: DCMT 11 T3 08-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DCMT-PMC
• Milling Insert: KDMB0750M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.7500″ OAW
• Compression Spring: 1.293″ OD, 9.5″ Free Length 0.25″ Wire Dia, 319.414 lb Max Load, 186.617 lb/in Spring Rate, Music Wire
• Milling Insert: KDMT07502ERGC, KCPH15, N/A Finish, 0.7500″ OAW
• Turning Insert: DCMT 11 T3 04-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DCMT-PMC
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2310; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Milling Insert: KDMT07502ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.7500″ OAW
• Transparent Double-Sided Foam Tape: 1″ Wide, 5 yd Long, 20 mil Thick, Acrylic Adhesive
• Milling Insert: KDMT07504ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.7500″ OAW
• Screw Machine Length Drill Bit: 0.1405″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Kyocera WNMG 432WP CA5525 Grade CVD Carbide, 0 Degree, Trigon, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
• Milling Insert: KDMT07504ERGC, KCPH15, N/A Finish, 0.7500″ OAW
• Kyocera WNMG 432WP CA5515 Grade CVD Carbide, 0 Degree, Trigon, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing in (P) Carbon/Alloy Steel
• Milling Insert: KDMT2010ERGC, KCPH15, N/A Finish, 0.7874″ OAW
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM5F-NB
• Milling Insert: KDMT2010ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.7874″ OAW
• Compression Spring: 0.411″ OD, 7″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 1.034 lb/in Spring Rate, Music Wire
• Milling Insert: KDMT2040ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.7874″ OAW
• Compression Spring: 0.411″ OD, 6.25″ Free Length 0.051″ Wire Dia, 13.895 lb Max Load, 4.388 lb/in Spring Rate, Music Wire
• Square End Mill: 15mm LOC, 10mm Shank Dia, 70mm OAL, 4 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8206
• Compression Spring: 0.411″ OD, 3.75″ Free Length 0.063″ Wire Dia, 24.791 lb Max Load, 17.389 lb/in Spring Rate, Music Wire
• Kyocera WNMG 433GT CA5525 Grade CVD Carbide, 0 Degree, Trigon, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Compression Spring: 0.881″ OD, 4″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 5.58 lb/in Spring Rate, Music Wire
• Kyocera WNMG 432HQ CA5515 Grade CVD Carbide, 0 Degree, Trigon, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (P) Carbon/Alloy Steel
• Compression Spring: 2.233″ OD, 6″ Free Length 0.177″ Wire Dia, 64.902 lb Max Load, 20.448 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1066; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Kyocera WNMG 432GT CA5515 Grade CVD Carbide, 0 Degree, Trigon, Negative Rake Angle, Neutral Turning Insert for Continuous and Medium-Roughing in (P) Carbon/Alloy Steel
• Ball End Mill: 0.045″ Dia, 0.225″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Kyocera WNMG 432PS CA5515 Grade CVD Carbide, 0 Degree, Trigon, Negative Rake Angle, Neutral Turning Insert for Continuous and Medium-Roughing in (P) Carbon/Alloy Steel
• Electronic Caliper Gages; Type: Inside and Outside; Minimum Measurement (mm): 0; Maximum Measurement (Inch): 2-1/8; Maximum Measurement (mm): 54.00; Resolution (mm): 0.1000; Resolution (Decimal Inch): 0.0100; Groove Depth (mm): 12.70; Groove Depth (Decima
• Compression Spring: 2.115″ OD, 5.75″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 26.668 lb/in Spring Rate, Music Wire