Products

• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.353″ OD, 6.25″ Free Length 0.032″ Wire Dia, 4.394 lb Max Load, 1.071 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 3/32'' Dia, 0.279'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 0.103'' Dia, 0.309'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.07″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.705″ OD, 4.75″ Free Length 0.098″ Wire Dia, 39.624 lb Max Load, 22.529 lb/in Spring Rate, Stainless Steel
• WNMG080404XP PV710 Cermet Turning Insert TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 80° Trigon, Series HYBCERM
• Ball End Mill: 0.1406″ Dia, 1.125″ LOC, 4 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 0.764″ OD, 7″ Free Length 0.085″ Wire Dia, 25.085 lb Max Load, 7.381 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Press Fit Headless Drill Bushing: P, 0.08″ ID, 3/16″ OD 3/8″ OAL, Carbon Steel
• Chamfer Mill: 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Compression Spring: 2.115″ OD, 5.5″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 27.964 lb/in Spring Rate, Music Wire
• 2.35mm, 118° Drill Point, 2.35mm Shank Diam, Fast Spiral Circuit Board Drill Bit 16mm Flute Length, 38mm OAL, Series 300
• Turning Insert: VCGW332FN_A3 CTBH41U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 2.291″ OD, 4.25″ Free Length 0.192″ Wire Dia, 108.231 lb Max Load, 43.427 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: SPMR 12 03 08 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series SPMR
• Turning Insert: VCGW21.51FN_A3 CTBH41U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 0.999″ OD, 8.5″ Free Length 0.098″ Wire Dia, 28.66 lb Max Load, 6.472 lb/in Spring Rate, Stainless Steel
• Turning Insert: RNMG 12 04 00 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.2500″ Corner Radius, N/A Series RNMG
• Turning Insert: VCGW331FN_A3 CTBH41U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• O-Ring: 0.69″ ID x 1.03″ OD, 0.16″ Thick, Silicone with SS Screen Round Cross Section
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.939″ OD, 2.75″ Free Length 0.225″ Wire Dia, 196.767 lb Max Load, 172.223 lb/in Spring Rate, Music Wire
• Turning Insert: VCGW331TN008FA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: SPMR 12 03 08-53 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series SPMR-53
• Spiral Flute Tap: #10-32, UNF, 3 Flute, 2-3 P, 3B Class of Fit, High Speed Steel-E, GLT-1 Finish 2.756″ OAL, Left Hand Flute, Left Hand Thread, X, Series Enorm Z
• O-Ring: 0.69″ ID x 1.03″ OD, 0.16″ Thick, Silicone Round Cross Section
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 0.093″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Turning Insert: VCGW21.5.5FNA4 CTBH41U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Spiral Flute Tap: #10-24, UNC, 3 Flute, 2-3 P, 3B Class of Fit, High Speed Steel-E, GLT-1 Finish 2.756″ OAL, Left Hand Flute, Left Hand Thread, X, Series Enorm Z
• Compression Spring: 1.469″ OD, 3.25″ Free Length 0.135″ Wire Dia, 47.072 lb Max Load, 29.243 lb/in Spring Rate, Stainless Steel
• Turning Insert: SPMR 12 03 04-53 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series SPMR-53
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.00; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11; Extension For
• Corner Radius End Mill: 1/8″ Dia, 0.187″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: SPMR 12 03 12 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series SPMR
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, TiB2 Coated, Corner Radius End, Centercutting
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.00; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11; Extension For
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: SPMR 12 03 04 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series SPMR
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.00; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11; Extension For
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.00; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11; Extension Fo
• Turning Insert: RNMG 12 04 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.2500″ Corner Radius, N/A Series RNMG
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.00; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11; Extension For
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1035
• Impact Socket: 3/4″ Drive 6-Point
• Electromagnet Lock Accessories; Type: Dual Technology Key Fob Credential; For Use With: Access Control Systems; Material: Glass Filled Polypropylene; Material: Glass Filled Polypropylene; For Use With: Access Control Systems; Type: Dual Technology Key Fob
• Kyocera PNMU 0905XNERGM TN620M Grade Uncoated Cermet, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 4657
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.015″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Milling Insert: XOHX 082010-MR2 CTPP211, CTPP211, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Kyocera SNMU 130508ENGM TN620M Grade Uncoated Cermet, 90 Degree Square, Negative Rake Angle, Neutral Milling insert for Finishing in (P) Free-Cutting Steel
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 45 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Damping Stays; Type: Lid Stay; Capacity: 33; 73.040; Overall Length (mm): 148.6000; Thickness (mm): 1.6; Width (mm): 28.00; Side: Left Hand; Maximum Opening: 160.000; Finish/Coating: Chrome; Mounting Hole Size Diameter: 3.600; Material: Nylon; Brass; Stee
• Damping Stays; Type: Lid Stay; Capacity: 33; 73.040; Overall Length (mm): 148.6000; Thickness (mm): 1.6; Width (mm): 28.00; Side: Right Hand; Maximum Opening: 160.000; Finish/Coating: Chrome; Mounting Hole Size Diameter: 3.600; Material: Nylon; Brass; Ste
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Catches; Type: Strong Magnetic Catch; Length (mm): 45.00; Height (mm): 10.0000; Width (mm): 11.00; Finish/Coating: Gray; Strike Length: 30.00; Strike Width: 11.00; Magnetic Force: 17.6; Minimum Order Quantity: Polycarbonate; Material: Polycarbonate; Strik
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Screw Machine Length Drill Bit: 0.368″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 6 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 37 ° Helix, RH Cut, RH Flute, Series VGM6
• Edge Pulls; Width (Inch): 1-31/32; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 30.0000; Material Grade: 304; Finish/Coating: Satin; Material: Stainless Steel; Material: Stainless Steel
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Temporary Structure Parts & Accessories; Type: Platform Accessory; Height (Feet): 6
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Screw Machine Length Drill Bit: 0.0177″ Dia, 180 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5700
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Screw Machine Length Drill Bit: 0.0319″ Dia, 180 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5700
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 1/32'' Dia, 3/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill Head: 3 Flutes Solid Carbide
• Spiral Flute Tap: MF8 x 0.75, MF, 3 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: MF8 x 1.00, MF, 3 Flute, Modified Bottoming, 6HX Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Corner Radius End Mill Head: 3 Flutes Solid Carbide
• Square End Mill: 0.035'' Dia, 0.053'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 3 Flutes Solid Carbide
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 1/32'' Dia, 3/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.411″ OD, 1.75″ Free Length 0.051″ Wire Dia, 11.056 lb Max Load, 14.235 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D7 & D8, Series 4630
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 1/32'' Dia, 0.045'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: VNMG331-28 AH8005, Solid Carbide TiAlN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VNMG
• Corner Radius End Mill: 0.08″ Dia, 0.12″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.294″ OD, 3″ Free Length 0.04″ Wire Dia, 7.697 lb Max Load, 6.067 lb/in Spring Rate, Stainless Steel
• Polyimide Film Tape: 2″ Wide, 5 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 311 ° F
• Compression Spring: 1.116″ OD, 5.75″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 54.593 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.313″ Dia, 1″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 0.313″ Shank Dia, 36 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Turning Insert: CCMT432PM T6130, Solid Carbide TiCN & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Corner Radius End Mill: 0.109″ Dia, 0.163″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 3.98; Overall Length (mm): 3.98; Material: Metal; Projection: 1.43 in; Finish/Coating: Brushed Nickel; Maximum Load Capacity: 5.00; Minimum Order Quantity: Metal; Material: Met
• Corner Radius End Mill: 3 Flutes Helix
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.25″ Dia, 3 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Spiral Flute Tap: M2 x 0.40, M, 2 Flute, Modified Bottoming, 6H Class of Fit, Cobalt, TICN Finish Right Hand Flute, Right Hand Thread, D3, Series B0459601
• Pressure Gauge: 2-1/2″ Dial, 0 to 60 psi, 1/4″ Thread, NPT, Center Back Mount Economy Pressure Gauge, Steel Case, Brass Wetted Parts, 3-2-3% of Scale Accuracy
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Kyocera CPMH 25151HQ CA5515 Grade CVD Carbide, 11 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 4.0900; Material: Steel
• R390-11T3 08M-KM 1020 Carbide Milling Insert TiAlN Finish
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• White Double-Sided PVC & Foam Tape: 3/4″ Wide, 5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• CNMG432TF IC507 Carbide Turning Insert 1/2″ Inscribed Circle, 1/32″ Corner Radius, 80° Diamond
• Black Double-Sided PVC & Foam Tape: 3/4″ Wide, 5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.293″ OD, 6.75″ Free Length 0.207″ Wire Dia, 162.378 lb Max Load, 95.09 lb/in Spring Rate, Stainless Steel
• LNEX130604PNELG ACP200 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Compression Spring: 1.821″ OD, 4.25″ Free Length 193.546 lb Max Load, 159.961 lb/in Spring Rate, Stainless Steel
• LNEX130624PNELG ACP200 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• LNEX130616PNELG ACP200 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• LNEX130620PNERG ACP300 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Square End Mill: 1/2'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2012
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• LNEX130604PNERH ACP300 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Chucking Reamer: 15/64″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1284; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• LNEX130620PNELG ACK200 Carbide Milling Insert Al2O3/TiCN Finish, 10.8mm Thick x 13mm Wide
• Ball End Mill: 0.4375″ Dia, 2″ LOC, 3 Flute, Solid Carbide 4″ OAL, 7/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 2.115″ OD, 8.5″ Free Length 242.767 lb Max Load, 62.752 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.63″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, Series Enorm
• LNEX130620PNERL ACK300 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Compression Spring: 1.41″ OD, 9″ Free Length 349.474 lb Max Load, 154.177 lb/in Spring Rate, Music Wire
• Tubular & Pocket Levels; Mounting Type: Magnetic; Mounting Direction: Horizontal/Vertical; Housing Material: Aluminum; Number of Vials: 1; Vial Types: (1) 360-Degree; Height/Diameter (Inch): 3.7; Height/Diameter (Decimal Inch): 3.7000; Sensitivity (Decima
• LNEX130612PNERL ACK300 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Corner Radius End Mill: 3 Flutes, Solid Carbide 41, 43 & 45 ° Helix, nano-Si Coated, Corner Chamfer End, Centercutting, Series 6798
• LNEX130620PNERL ACM300 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Compression Spring: 0.764″ OD, 9.5″ Free Length 0.135″ Wire Dia, 112.968 lb Max Load, 42.461 lb/in Spring Rate, Music Wire
• LNEX130604PNELG ACK300 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Compression Spring: 1.88″ OD, 9″ Free Length 0.148″ Wire Dia, 63.354 lb Max Load, 10.82 lb/in Spring Rate, Music Wire
• Turning Insert: DCGT21.52FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• LNEX130604PNERH ACP200 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Turning Insert: DCGT21.5.5FNA4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Turning Insert: DCGW21.5.5FNA4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• LNEX130604PNELL ACP200 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Compression Spring: 2.233″ OD, 5.5″ Free Length 0.225″ Wire Dia, 121.973 lb Max Load, 52.546 lb/in Spring Rate, Stainless Steel
• LNEX130612PNERG ACP100 Carbide Milling Insert Al2O3/TiAlN Finish, 10.8mm Thick x 13mm Wide
• Turning Insert: DCGW21.52FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• LNEX130632PNERL ACM200 Carbide Milling Insert Al2O3/TiCN Finish, 10.8mm Thick x 13mm Wide
• Turning Insert: CCGT21.5.5FNA3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• LNEX130604PNERL ACK200 Carbide Milling Insert Al2O3/TiCN Finish, 10.8mm Thick x 13mm Wide
• Turning Insert: CCGW21.5.5FNA3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• LNEX130616PNERL ACP200 Carbide Milling Insert TiAlN/AlCrN Finish, 10.8mm Thick x 13mm Wide
• Turning Insert: CCGT21.50FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• GIP 4.78E-0.55 IC354 Carbide Grooving Insert TiCN Finish, Neutral, 4.78mm Cutting Width, 2.8mm Max Depth
• Turning Insert: CCGT21.52FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Compression Spring: 1.41″ OD, 2.5″ Free Length 349.474 lb Max Load, 655.254 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/64″ Dia, 0.045″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/64″ Dia, 0.023″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.031″ Dia, 0.093″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TQC34
• Press Fit Headless Drill Bushing: HM, 4.1″ ID Steel
• Ball End Mill: 0.125″ Dia, 0.1″ LOC, 2 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 45 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Tapered End Mill: 5 ° per Side, 3/32″ Small Dia, 1/2″ LOC, 3 Flutes, Solid Carbide, Square End 3/16″ Shank Dia, 2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• Ball End Mill: 0.04″ Dia, 0.12″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Radius End Mill: 0.039″ Dia, 0.117″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spiral Flute Tap: 7/16-14, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, Bright/Uncoated 1.4375″ Thread Length, 3.1563″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 761
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 19.63; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63;
• Milling Insert: KDMB10M0ERGP, KCPK10, Cast Iron & Steel N/A Finish, 0.3937″ OAW
• Spiral Flute Tap: 7/16-20, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, Bright/Uncoated 1.4375″ Thread Length, 3.1563″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 761
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 19.63; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63;
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 19.63; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 12.63;
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Polytetrafluroethylene Film Tape: 1″ Wide, 5 yd Long, 5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Compression Spring: 2.056″ OD, 5.5″ Free Length 0.177″ Wire Dia, 95.708 lb Max Load, 29.196 lb/in Spring Rate, Music Wire
• Rigid Top Plate Caster: Polyurethane, 3-15/16″ Wheel Dia, 2″ Wheel Width, 441 lb Capacity, 5-9/16″ OAH 4″ Plate Length, 4.5″ Plate Width, No Brake
• Compression Spring: 2.056″ OD, 8.5″ Free Length 249.222 lb Max Load, 66.44 lb/in Spring Rate, Music Wire
• Polyimide Film Tape: 1″ Wide, 5 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 311 ° F
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.41″ OD, 3.75″ Free Length 0.207″ Wire Dia, 150.32 lb Max Load, 146.061 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Bright/Uncoated
• Screw Machine Length Drill Bit: 0.185″ Dia, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 207
• Spiral Flute Tap: #6-32, UNJC, 3 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Compression Spring: 1.88″ OD, 4.25″ Free Length 0.192″ Wire Dia, 130.609 lb Max Load, 59.917 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: #6-32, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Chucking Reamer: 0.1505″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Spiral Flute Tap: 3/8-24, UNF, 4 Flute, Modified Bottoming, 3B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Spiral Flute Tap: 3/8-16, UNC, 4 Flute, Modified Bottoming, 2B Class of Fit, HSS-E-PM, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series MTH
• Square End Mill: 0.4724'' Dia, 1.1811'' LOC, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 60 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.5″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317Ti
• Compression Spring: 0.353″ OD, 1.125″ Free Length 0.068″ Wire Dia, 27.497 lb Max Load, 115.303 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.5″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H4, Series 317Ti
• Jobber Length Drill Bit: 0.173″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: 2QP-CCMW21.50.5 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMW
• Jobber Length Drill Bit: 0.1719″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Latches; Type: Push Knob; Length (mm): 49.00; Width (mm): 34.00; Height (mm): 49.0000; Finish/Coating: Chrome; Series: PKL-08; Minimum Order Quantity: Zinc Alloy; Material: Zinc Alloy; Description: Weight: 63 g; Diameter: 1.57 in (40 mm); Holding Force: 2
• Duct Tape: 2″ Wide, 3.1 mil Thick, Aluminum Foil Acrylic Adhesive, 19 lb/in Tensile Strength
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9245; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 1/64″ Radius, 6 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Jobber Length Drill Bit: 0.199″ Dia, 140 °, Solid Carbide AlTiN Nano Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Double Angle Milling Cutter: 90 °, 1/4″ Cut Dia, 0.167″ Cut Width, 1″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Coated, 4 Teeth
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 0.411″ OD, 6.25″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 1.159 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 5/16-18, UNC & DIN/ANSI, 3 Flutes, Plug, HSS-E, TiAlN Finish 18 mm Thread Length, 90 mm OAL, Right Hand, H7, Series TC217
• Compression Spring: 0.411″ OD, 6.75″ Free Length 0.045″ Wire Dia, 9.831 lb Max Load, 2.549 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Spiral Point Tap: 5/16-18, UNC & DIN/ANSI, 3 Flutes, Plug, HSS-E, TiAlN Finish 18 mm Thread Length, 90 mm OAL, Right Hand, H11, Series TC217
• Compression Spring: 0.411″ OD, 5.25″ Free Length 0.051″ Wire Dia, 13.895 lb Max Load, 5.24 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 0.411″ OD, 5.5″ Free Length 0.051″ Wire Dia, 13.895 lb Max Load, 4.998 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.3438″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 0.881″ OD, 3″ Free Length 0.072″ Wire Dia, 17.615 lb Max Load, 9.096 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.0591″ Dia, 0.0866″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Square End Mill: 0.01'' Dia, 3/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Compression Spring: 1.175″ OD, 1.875″ Free Length 0.148″ Wire Dia, 74.095 lb Max Load, 115.86 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 5″ Free Length 0.035″ Wire Dia, 6.698 lb Max Load, 2.48 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Compression Spring: 0.294″ OD, 4″ Free Length 0.038″ Wire Dia, 8.406 lb Max Load, 4.25 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1 mm Cutting Width, 3 mm Max Depth
• Compression Spring: 0.294″ OD, 3.75″ Free Length 0.04″ Wire Dia, 9.681 lb Max Load, 5.551 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Square End Mill: 3/64'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.5 mm Cutting Width, 3 mm Max Depth, Series 25606