Products

• Compression Spring: 1.88″ OD, 4″ Free Length 0.148″ Wire Dia, 47.546 lb Max Load, 22.11 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.3937″ Dia, 0.4921″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 1.97 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Tap Sets; Overall Length (Decimal Inch): 2.8188
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Chamfer End Mill: 0.125″ Dia, 0.156″ LOC, 4 Flute, 0.0025″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.315″ Dia, 0.3937″ LOC, 4 Flute, 0.0063″ Chamfer Width, Solid Carbide 1.69 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Chamfer End Mill: 0.75″ Dia, 0.9375″ LOC, 4 Flute, 0.015″ Chamfer Width, Solid Carbide 3″ OAL, 3/4″ Shank Dia, AlTiN Coated, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Countersinks; Head Diameter (mm): 9.40; Included Angle: 90; Number Of Flutes: 3; Tool Material: Cobalt Steel; Cutting Direction: Right Hand; Minimum Cutting Diameter (mm): 2.20; Shank Diameter (mm): 6.00; Overall Length (mm): 50; Shank Type: Straight; Too
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Jobber Length Drill Bit: 0.2067″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Corner Chamfer End Mill: 0.0938″ Dia, 0.117″ LOC, 4 Flute, 0.0018″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated, Centercutting
• Chucking Reamer: 0.0935″ Dia, 3″ OAL, 3/4″ Flute Length, Straight Shank, Cobalt 4 Flute
• Compression Spring: 0.875″ OD, 5.5″ Free Length 0.12″ Wire Dia, 55.781 lb Max Load, 30.055 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.185″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 2.056″ OD, 4.75″ Free Length 173.133 lb Max Load, 108.751 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.1654″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5514
• Spiral Flute Tap: 7/16-20, UNF, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1.438″ Thread Length, 3.156″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• CCMT 2-1-SM IC9250 Carbide Turning Insert TiCN/Al2O3/TiN Finish, 6.3mm Long, 1/4″ Inscribed Circle, 1/64″ Corner Radius, 80° Diamond
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 3/32″ Dia, 0.074″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Polytetrafluroethylene Film Tape: 1/2″ Wide, 5 yd Long, 2 mil Thick 20 Lb/In Tensile Strength, Acrylic Adhesive, 500 ° F
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Dovetail Cutter: 6 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Corner Chamfer End Mill: 0.1575″ Dia, 0.1969″ LOC, 4 Flute, 0.0031″ Chamfer Width, Solid Carbide 1-1/2″ OAL, AlTiN Coated, Centercutting
• Dovetail Cutter: 2 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Dovetail Cutter: 1 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Jobber Length Drill Bit: 0.07″ Dia, 118 °, Solid Carbide Bright/Uncoated, 1.75″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series D33W
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Corner Chamfer End Mill: 0.1181″ Dia, 0.1476″ LOC, 4 Flute, 0.0024″ Chamfer Width, Solid Carbide 1-1/2″ OAL, AlTiN Coated, Centercutting
• Dovetail Cutter: 4 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Milling Insert: SEHT 1204AEFN-27P H216T, H216T, Solid Carbide N/A Finish, 1.0000″ OAW
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Safe-Lock; Flute Type: Helical
• Turning Insert: VCGT43575FN25P CTPX710, Solid Carbide AlTiN Finish, Neutral, 1/2″ Inscribed Circle, 0.1181″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Corner Radius End Mill: 1/16″ Dia, 0.05″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Square End Mill: 1/4'' Dia, 2'' LOC, 1/4'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, RH Cut, RH Flute
• Corner Chamfer End Mill: 0.4606″ Dia, 1.0236″ LOC, 4 Flute, 0.0094″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Compression Spring: 2.585″ OD, 6.5″ Free Length 0.225″ Wire Dia, 106.141 lb Max Load, 34.427 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.4724″ Dia, 0.8661″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, nACRo Coated, Corner Radius End
• Corner Chamfer End Mill: 0.0787″ Dia, 0.0984″ LOC, 4 Flute, 0.0016″ Chamfer Width, Solid Carbide 1-1/2″ OAL, AlTiN Coated, Centercutting
• Straight Flutes Tap: 9/16-12, UNC, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 1-21/32″ Thread Length, Right Hand, H5, Series 725
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Safe-Lock; Flute Type: Helical
• Translucent Double-Sided Rubber Tape: 1″ Wide, 49 yd Long, 16 mil Thick, Rubber Resin Adhesive
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.1″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 2.174″ OD, 9″ Free Length 0.177″ Wire Dia, 90.73 lb Max Load, 15.972 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3-1/2″ OAL, 1/2″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 0.999″ OD, 9.5″ Free Length 0.105″ Wire Dia, 34.529 lb Max Load, 7.395 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 3″ Free Length 0.148″ Wire Dia, 85.888 lb Max Load, 96.56 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 2.468″ OD, 4.5″ Free Length 0.225″ Wire Dia, 156.761 lb Max Load, 63.674 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• O-Ring: 4-1/4″ ID x 4-7/16″ OD, 3/32″ Thick, Dash 156, HNBR Round Cross Section
• Corner Chamfer End Mill: 0.5″ Dia, 0.625″ LOC, 4 Flute, 0.01″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, AlTiN Coated, Centercutting
• Compression Spring: 1.586″ OD, 6.5″ Free Length 0.192″ Wire Dia, 153.127 lb Max Load, 52.094 lb/in Spring Rate, Music Wire
• Chucking Reamer: 7/32″ Dia, 4″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• O-Ring: 4-7/8″ ID x 5-3/8″ OD, 1/4″ Thick, Dash 428, HNBR Round Cross Section
• Grooving Insert: QI-NEGF 1125, Solid Carbide Neutral, 0.0728″ Cutting Width, Series CoroCut QI
• Compression Spring: 1.586″ OD, 5.5″ Free Length 0.207″ Wire Dia, 188.324 lb Max Load, 84.525 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.2195″ Dia, 4″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Grooving Insert: QI-NEGF 1105, Solid Carbide Neutral, 0.0941″ Cutting Width, Series CoroCut QI
• Turning Insert: DCMW32.51 T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMW
• Grooving Insert: QI-NEGF 1145, Solid Carbide Neutral, 0.0941″ Cutting Width, Series CoroCut QI
• Tapered End Mill: 15 ° per Side, 0.078″ Small Dia, 0.238″ LOC, 2 Flutes, Solid Carbide, Ball End 3/16″ Shank Dia, 2″ OAL, AlTiN Finish, Series Runner Cutters
• Grooving Insert: QI-NEGF 1125, Solid Carbide Neutral, 0.0846″ Cutting Width, Series CoroCut QI
• Square End Mill: 0.065'' Dia, 0.098'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mill: 2 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Grooving Insert: QI-NEGF 1145, Solid Carbide Neutral, 0.0787″ Cutting Width, Series CoroCut QI
• Compression Spring: 1.116″ OD, 4.5″ Free Length 0.125″ Wire Dia, 49.667 lb Max Load, 24.878 lb/in Spring Rate, Stainless Steel
• 1/4″ Diam 6-Flute 35/38° Solid Carbide 0.03″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 3/4″ LOC, 2-1/2″ OAL, 1/4″ Shank Diam, Centercutting, Standard Length
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• 1/4″ Diam 6-Flute 35/38° Solid Carbide Corner Radius Roughing & Finishing End Mill AlCr Finish, 3/4″ LOC, 2-1/2″ OAL, 1/4″ Shank Diam, Centercutting, Standard Length
• Grooving Insert: QI-NEGF 1125, Solid Carbide Neutral, 0.0787″ Cutting Width, Series CoroCut QI
• Square End Mill: 0.055'' Dia, 0.083'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: QI-NEGF 1105, Solid Carbide Neutral, 0.0787″ Cutting Width, Series CoroCut QI
• Spiral Point Tap: #12-24, UNC, 2 Flutes, Bottoming, 2B/3B, High Speed Steel, TiN Finish 15/16″ Thread Length, 2-3/8″ OAL, Right Hand, H3, Series 756
• 1/4″ Diam 6-Flute 35/38° Solid Carbide 0.015″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 3/4″ LOC, 2-1/2″ OAL, 1/4″ Shank Diam, Centercutting, Standard Length
• 1/4″ Diam 6-Flute 35/38° Solid Carbide 0.06″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 3/4″ LOC, 2-1/2″ OAL, 1/4″ Shank Diam, Centercutting, Standard Length
• Grooving Insert: QI-NEGF 1125, Solid Carbide Neutral, 0.0941″ Cutting Width, Series CoroCut QI
• Milling Insert: OFHT 040305SN-M50 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Milling Insert: OFHT 040305SN-F50 CTPP225, CTPP225, Solid Carbide N/A Finish,
• Ball End Mill: 0.023″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Compression Spring: 1.998″ OD, 5.5″ Free Length 0.207″ Wire Dia, 151.909 lb Max Load, 53.837 lb/in Spring Rate, Music Wire
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Inch; Head Type: Offset; Box End Type: 12-Point; Wrench Size (Decimal Inch): 0.1880; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Le
• Edge & Center Finder Accessories; Type: Probe Insert; Includes: 1 Probe Insert; For Use With: REGO-FIX EdgeMaster; Accessory Type: Probe Insert
• Compression Spring: 2.35″ OD, 5.75″ Free Length 0.207″ Wire Dia, 130.243 lb Max Load, 39.119 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1.25″ Thread Length, 2.938″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1.25″ Thread Length, 2.938″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Compression Spring: 1.41″ OD, 6″ Free Length 0.125″ Wire Dia, 39.821 lb Max Load, 12.404 lb/in Spring Rate, Stainless Steel
• Turning Insert: CNMG 16 06 08-WM 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Diamond 80 ™, Series CNMG-WM
• 1/4″ Diam 6-Flute 35/38° Solid Carbide 0.02″ Corner Radius Roughing & Finishing End Mill AlCr Finish, 3/4″ LOC, 2-1/2″ OAL, 1/4″ Shank Diam, Centercutting, Standard Length
• Ball End Mill: 0.1562″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Point Tap: #8-32, UNC, 3 Flutes, Gunnose, 2B, High Speed Steel, TiCN Finish 0.512″ Thread Length, 2-31/64″ OAL, Right Hand, Series 22217
• Abrasive Bur: 3/64, Ball
• Edge Pulls; Width (Inch): 7-7/8; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 56.0000; Material Grade: 304; Finish/Coating: Satin; Material: Stainless Steel; Material: Stainless Steel
• Abrasive Bur: 1/64, Ball 9/64″ LOC
• Abrasive Bur: Ball 1/16″ LOC
• Edge Pulls; Width (Inch): 7-7/8; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 56.0000; Material Grade: 304; Finish/Coating: Mirror; Material: Stainless Steel; Material: Stainless Steel
• Polyurethane Film Tape: 1/2″ Wide, 5 yd Long, 14 mil Thick 75 Lb/In Tensile Strength, Acrylic Adhesive
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1; Length (yd): 5.00; Thickness (mil): 5.0000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 250.000; Color: Clear; Liner Material: Paper; Series: 950
• Abrasive Bur: Ball
• Corner Radius End Mill: 3 Flutes, Solid Carbide 39, 40 & 41 ° Helix, Carbo Coated, Corner Chamfer End, Centercutting, Series 6978
• Chucking Reamer: 0.1955″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.031″ Dia, 0.025″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 0.1181'' Dia, 0.3543'' LOC, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mill: 6 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, AlTiN Coated
• CCGW32.51S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1563″ Thick
• CCGW32.53S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1563″ Thick
• CCGW32.52S0830F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick
• Grooving Insert: KCGP3189 PR930, Solid Carbide TiCN Finish, Right Hand, 4.8 mm Cutting Width, 3.8 mm Max Depth, Series CERA
• DCGW32.51S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1563″ Thick
• CCGW32.51S0530F 7135 CBN Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1563″ Thick
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Bottoming, 2BX Class of Fit, Slidur Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 4654
• Chucking Reamer: 11/64″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Grooving Insert: KCRP3094 PR930, Solid Carbide TiCN Finish, Right Hand, 4.78 mm Cutting Width, 3.8 mm Max Depth, Series CERA
• DCGW32.53S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1563″ Thick
• 1/2″ Head Diam, 5/16″ Shank Diam, 0 Flute 60° Cobalt Countersink Bright Finish, 2″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 1.351″ OD, 3.75″ Free Length 0.148″ Wire Dia, 65.078 lb Max Load, 40.444 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 1/16″ Dia, 2-1/2″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 4 Flute, RH
• DCGW32.52S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick
• 1/2″ Head Diam, 5/16″ Shank Diam, 0 Flute 90° Cobalt Countersink Bright Finish, 1-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 2.468″ OD, 7.5″ Free Length 0.192″ Wire Dia, 100.775 lb Max Load, 21.131 lb/in Spring Rate, Music Wire
• DCGW32.52S0530F 7135 CBN Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick
• Compression Spring: 2.174″ OD, 7″ Free Length 0.225″ Wire Dia, 125.093 lb Max Load, 43.984 lb/in Spring Rate, Stainless Steel
• CCGW32.52S0530F 7135 CBN Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick
• Compression Spring: 2.174″ OD, 4.75″ Free Length 164.385 lb Max Load, 97.287 lb/in Spring Rate, Stainless Steel
• DCGW32.52S0830F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick
• Compression Spring: 0.94″ OD, 9″ Free Length 0.085″ Wire Dia, 26.278 lb Max Load, 4.702 lb/in Spring Rate, Music Wire
• Clear Double-Sided Acrylic Tape: 3/4″ Wide, 2 yd Long, 20 mil Thick, Acrylic Adhesive
• Grooving Insert: KCGP3189 PR930, Solid Carbide TiCN Finish, Left Hand, 4.8 mm Cutting Width, 3.8 mm Max Depth, Series CERA
• DCGW32.51S0530F 7135 CBN Turning Insert Uncoated, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1563″ Thick
• Jobber Length Drill Bit: 0.277″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Open End Wrench: 12 mm x 14 mm, Double End Head 172 mm OAL, Vanadium Steel, Chrome-Plated
• Chamfer Mill: 6 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, AlTiN Coated
• Ball End Mill: 0.0157″ Dia, 0.0157″ LOC, 2 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Milling Insert: OFHW 040302EN CTC5240, CTC5240, Solid Carbide N/A Finish,
• Grooving Insert: KCGP3122 PR930, Solid Carbide TiCN Finish, Left Hand, 3.1 mm Cutting Width, 3.8 mm Max Depth, Series CERA
• CCGW32.52S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1563″ Thick
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Screw Machine Length Drill Bit: 0.1102″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Milling Insert: OFHT 040305SN-F50 CTCS245, CTCS245, Solid Carbide N/A Finish,
• Screw Machine Length Drill Bit: 0.1142″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 26.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 45.7000; Finish Coating: TiCN; Series
• Screw Machine Length Drill Bit: 0.0984″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Ball End Mill: 0.0156″ Dia, 0.023″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Screw Machine Length Drill Bit: 0.1024″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Series
• Chucking Reamer: 0.3095″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Ball End Mill: 0.043″ Dia, 0.129″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Screw Machine Length Drill Bit: 0.1063″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Ball End Mill: 0.043″ Dia, 0.129″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chucking Reamer: 1/64″ Dia, 3/4″ OAL, 3/8″ Flute Length, Straight Shank, High Speed Steel 2 Flute
• Screw Machine Length Drill Bit: 0.1094″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.000; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Screw Machine Length Drill Bit: 0.0906″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 16.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: AlTiN; Seri
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: AlTiN; Seri
• Screw Machine Length Drill Bit: 0.0945″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: AlTiN; Seri
• Screw Machine Length Drill Bit: 0.0937″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Screw Machine Length Drill Bit: 0.0807″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 3.000; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Series
• Screw Machine Length Drill Bit: 0.377″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 1/64'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.0866″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Slitting & Slotting Saw: 1-1/4″ Dia, 1/32″ Thick, 1/2″ Arbor Hole, 16 Teeth, Solid Carbide Bright/Uncoated
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 16.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: AlTiN; Seri
• Slitting & Slotting Saw: 1-1/4″ Dia, 1/16″ Thick, 1/2″ Arbor Hole, 16 Teeth, Solid Carbide Bright/Uncoated
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Screw Machine Length Drill Bit: 0.0827″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Straight-Cylindrical Shank, Series DC150-03-A0
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 26.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 45.7000; Finish Coating: TiCN; Serie
• Slitting & Slotting Saw: 1-1/4″ Dia, 0.02″ Thick, 1/2″ Arbor Hole, 16 Teeth, Solid Carbide Bright/Uncoated
• Dovetail Cutter: 4 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Chucking Reamer: 0.344″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.02″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Nano Finish
• Chucking Reamer: 0.336″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Compression Spring: 2.585″ OD, 6″ Free Length 0.207″ Wire Dia, 118.89 lb Max Load, 32.313 lb/in Spring Rate, Music Wire
• Dovetail Cutter: 1 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Chucking Reamer: 0.3346″ Dia, 3-1/2″ OAL, 1-1/4″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Dovetail Cutter: 2 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Kyocera CCGT 4305RA3 PDL025 Grade DLC Carbide, 7 Degree, Diamond, Positive Rake Angle, Right-Hand Turning Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals
• Tap Sets; Overall Length (Decimal Inch): 2.5000; Overall Length (Inch): 2-1/2
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Dovetail Cutter: 6 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Kyocera CCGT 4305LA3 PDL025 Grade DLC Carbide, 7 Degree, Diamond, Positive Rake Angle, Left-Hand Turning Insert for Light Interruption and Finishing-Medium in (N) Non-Ferrous Metals
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.031″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 8 Teeth, Solid Carbide, AlTiN Finish
• Jobber Length Drill Bit: 0.6406″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Straight Flutes Tap: Metric, 4 Flutes, Modified Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Ball End Mill: 0.093″ Dia, 0.139″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: TDTRU K10, Solid Carbide Uncoated, Neutral, 0.315″ Cutting Width, Series TDT-RU (Full Radius)
• Square End Mill: 5/8'' Dia, 3/4'' LOC, 5/8'' Shank Dia, 3-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Milling Insert: LDFT 150416SR-33 CTPM240, CTPM240, Solid Carbide N/A Finish,
• Square End Mill: 0.01'' Dia, 3/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.764″ OD, 4.5″ Free Length 0.125″ Wire Dia, 70.117 lb Max Load, 56.503 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.05″ Dia, 0.075″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.3779″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.3779″ OAL, 0.0039″ Corner Radius
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.116″ OD, 8.5″ Free Length 0.112″ Wire Dia, 37.008 lb Max Load, 8.682 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCGW32.52FN_A2 CTDCD10, Polycrystalline Diamond Diamond Coating Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• CCGT120408R-A3 PDL025 Carbide Turning Insert Diamond-Like Carbon (DLC) Finish, RH, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 80° Diamond
• Jobber Length Drill Bit: 0.089″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Ball End Mill: 0.1875″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Single End, Series SAPB
• Square End Mill: 5/32'' Dia, 1-1/4'' LOC, 3/16'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, 50 ° Variable Helix, RH Cut, RH Flute
• Milling Insert: AH8015, Solid Carbide N/A Finish,
• Compression Spring: 0.881″ OD, 9″ Free Length 0.085″ Wire Dia, 27.948 lb Max Load, 5.206 lb/in Spring Rate, Music Wire
• Lever Locksets; Door Thickness: 1 3/4 - 2 1/8; Back Set: 2-3/4; For Use With: Utility; Storeroom; Exit Doors; Finish/Coating: Satin Chrome; Cylinder Type: None; Special Item Information: Storeroom or Closet Lock Function; Rating: Fire Rated
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Ball End Mill: 0.05″ Dia, 0.075″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Milling Insert: AH3135, Solid Carbide N/A Finish,
• Compression Spring: 1.351″ OD, 2″ Free Length 0.192″ Wire Dia, 128.683 lb Max Load, 241.914 lb/in Spring Rate, Stainless Steel
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Corner Radius End Mill Head: 5/16″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• VCMT332EGU-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.6535″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 35° Included Angle, Series AC5000S
• Corner Radius End Mill Head: 5/16″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• VCMT331EGU-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.6535″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 35° Included Angle, Series AC5000S
• VBMT331EGU-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.6535″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 35° Included Angle, Series AC5000S
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 0.60; Overall Length (mm): 0.60; Material: Metal; Projection: 1.2 in; Finish/Coating: Stainless Steel; Maximum Load Capacity: 0.50; Minimum Order Quantity: Metal; Material: Met
• Spiral Flute Tap: M8 x 1.25, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, PM-HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D4 & D5, Series 4636
• Turning Insert
• Square End Mill: 1/2'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 3'' OAL, 8 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 285
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 40 ° Helix, AlTiN Coated, Corner Radius End, Series KOR5
• Screw Machine Length Drill Bit: 0.375″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 0.06'' Dia, 0.09'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 5/8'' Dia, 1-1/4'' LOC, 5/8'' Shank Dia, 3-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.075'' Dia, 0.113'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1/2; Length (yd): 5.00; Thickness (mil): 5.0000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 250.000; Color: Clear; Liner Material: Paper; Series: 950
• Square End Mill: 0.07'' Dia, 0.105'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 6″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• TCMT222-PM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 1/8″ Thick, 60° Triangle
• Corner Radius End Mill: 0.047″ Dia, 0.038″ LOC, 0.008″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• TCMT222-PF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 1/8″ Thick, 60° Trigon
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End