Products

• Grooving Insert: MX22CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Milling Inserts; Insert Style: OFER; Insert Size: 070405; Insert Material: Solid Carbide; Manufacturer Grade: YG602; Thickness (Inch): 3/16; Corner Radius (Decimal Inch): 0.0197; Series: OFER; Cutting Direction: Right Hand; Coating/Finish: TiAlN; Width (D
• Grooving Insert: MX22CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.219″ Cutting Width, Series Tiger-tec Silver
• Spiral Flute Tap: M3 x 0.50, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, ZrN Finish Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Grooving Insert: MX22CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.167″ Cutting Width, Series Tiger-tec Silver
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: MX22CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.207″ Cutting Width, Series Tiger-tec Silver
• O-Ring: 1.612″ ID x 1.818″ OD, 0.103″ Thick, Dash 130, Nitrile Butadiene Rubber Round Cross Section
• Square End Mill: 1/64'' Dia, 5/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Grooving Insert: CF5 WSM23S TiAlN, Al2O3 & Al Finish, Neutral, 0.189″ Cutting Width
• Socket-Mount Leveling Pads & Mounts; Leveling Mount Type: Studded; Thread Size: M12; Base Diameter (Inch): 1-31/32; Load Capacity (Lb.): 220.000; Load Capacity: 100.0; 220.0; Load Capacity (kg): 100.00; Overall Length (Inch): 3-13/16; Overall Length (Deci
• Grooving Insert: MX22CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.197″ Cutting Width, Series Tiger-tec Silver
• Chamfer Mill: 0.25″ Dia, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Bright/Uncoated
• Grooving Insert: MX22CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.197″ Cutting Width, Series MX-CF5
• Square End Mill: 9/64'' Dia, 7/32'' LOC, 3/16'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: MX22RF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Spiral Flute Tap: 7/16-14, UNC, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1.438″ Thread Length, 3.156″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Grooving Insert: MX22RF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.197″ Cutting Width, Series MX-RF5
• Spiral Point Tap: M10 x 1, Metric, 3 Flutes, Plug, High Speed Steel, Black Oxide Finish 1-1/4″ Thread Length, 2-15/16″ OAL, Right Hand, D11, Series SPGP+5
• Milling Insert: SNHU 120408ER-F40 CTCM245, CTCM245, Solid Carbide N/A Finish,
• Spiral Flute Tap: 7/16-20, UNF, 3 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 1.438″ Thread Length, 3.156″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Spiral Point Tap: M10 x 1.5, Metric, 3 Flutes, Plug, High Speed Steel, Black Oxide Finish 1-1/4″ Thread Length, 2-15/16″ OAL, Right Hand, D11, Series SPGP+5
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Turning Insert: TNMX 11 06-2 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Left Hand, 0.1969″ Corner Radius, N/A Trigon,
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Turning Insert: 3-80-101112-8-M5W 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series 3-80-M5W
• Milling Insert: APH730, Solid Carbide N/A Finish,
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: AlTiN; Seri
• Turning Insert: 3-80-101108-8-M5W 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series 3-80-M5W
• Kyocera SEKW 422TN TN100M Grade Uncoated Cermet, Square, Positive Rake Angle, Neutral Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: AlTiN; Seri
• Turning Insert: 3-80-101112-8-M5W 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series 3-80-M5W
• Turning Insert: 3-80-101108-8-M5W 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series 3-80-M5W
• Open End Wrench: 10 mm x 13 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Jobber Length Drill Bit: 0.25″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Spiral Flute Tap: #12-24, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, ZrN Finish 0.9375″ Thread Length, 2.375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 891
• Slide Bolts; Type: Centered Strike Slide Bolt; Length (mm): 55.00; Width (mm): 32.00; Finish/Coating: Satin; Additional Information: Overall Length: 70 mm; 32 x 15 x 2 mm; Counter Plate Size: 32 x 18 x 6 mm; Screw: 2.7 x 16; Weight: 47 g; Minimum Order Qu
• All-Purpose & Utility Hooks; Overall Length (Inch): 43/64; Finish/Coating: Black; Maximum Load Capacity: 17.60; Width (Inch): 1-9/32; Additional Information: Distance Between Mounting Holes: 20 mm; Application: Undermount; Projection: 13.5 mm; Minimum Ord
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.25″ Dia, 1″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Compression Spring: 1.939″ OD, 2.625″ Free Length 182.747 lb Max Load, 245.867 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 4 Flute, 0.0126″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Grooving Insert: GDG6020GS PR1215, Solid Carbide Megacoat, Neutral, 6 mm Cutting Width, 30 mm Max Depth, Series KGD
• Grooving Insert: GDG8030GS GW15, Solid Carbide Co & WC Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series KGD
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Square End Mill: 1/32'' Dia, 5/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 1 Flute, Solid Carbide Single End, Uncoated, Upcut Flute, 22 ° Helix, Centercutting, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.1406″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Boring Bar: 0.36″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACRo Coated, Corner Radius End
• Screw Machine Drill Bit
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Boring Bar: 0.36″ Min Bore, 1-1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.36″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 5/16″ Dia, 15/32″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Jobber Length Drill Bit: 0.4134″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Ball End Mill: 0.075″ Dia, 0.625″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 5/16″ Dia, 15/32″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Ball End Mill: 0.065″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 5/16″ Dia, 15/32″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Ball End Mill: 0.085″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Square End Mill: 0.093'' Dia, 0.074'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Helical Flute, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.09″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: SAKU 1706ABSR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish, 1.0000″ OAW
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Modified Bottoming, H7 Class of Fit, Cobalt, GLT-1 Finish 0.512″ Thread Length, 2.756″ OAL, Right Hand Flute, Right Hand Thread, H7, Series BU50C343
• Ball End Mill: 0.1406″ Dia, 0.562″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 1/4'' Dia, 1-1/8'' LOC, 1/4'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Tapered End Mill: 5 ° per Side, 1/16″ Small Dia, 3 Flutes, Solid Carbide, Square End 3/16″ Shank Dia, 3″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• Compression Spring: 1.351″ OD, 7.5″ Free Length 0.207″ Wire Dia, 156.182 lb Max Load, 76.214 lb/in Spring Rate, Stainless Steel
• Tapered End Mill: 10 ° per Side, 0.36″ LOC, 3 Flutes, Solid Carbide, Square End 3″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• O-Ring: 0.88″ ID x 1.38″ OD, 0.22″ Thick, Silicone with SS Screen Round Cross Section
• Compression Spring: 2.468″ OD, 4.75″ Free Length 145.941 lb Max Load, 76.891 lb/in Spring Rate, Stainless Steel
• 1.05mm, 118° Drill Point, 1.05mm Shank Diam, Fast Spiral Circuit Board Drill Bit 16mm Flute Length, 38mm OAL, Series 300
• Tap Sets; Overall Length (Decimal Inch): 2.9375; Overall Length (Inch): 2-15/16
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Stainless Steel; Material: Stainless Steel; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Chamfer End Mill: 0.1181″ Dia, 4 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, AlTiN Coated, Centercutting
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Chamfer End Mill: 0.1378″ Dia, 4 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, AlTiN Coated, Centercutting
• Polyimide Film Tape: 4″ Wide, 5 yd Long, 2.5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, -40 to 500 ° F
• Turning Insert: 2QP-CNGA431 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Ball End Mill: 0.375″ Dia, 0.875″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, AlTiN Coated, Single End, Series HARVI
• Turning Insert: 2QP-VNGA331-H BX380, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Turning Insert: VNGG160404-01 TH10, Solid Carbide Uncoated Finish, Neutral, 35.0 &deg N/A Diamond, Series VNGG
• Turning Insert: 2QP-CNGA434-E BX815, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0630″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: 2QP-DNGA432-LT BX815, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Gray Double-Sided Foam Tape: 1/2″ Wide, 36 yd Long, 45 mil Thick, Acrylic Adhesive
• Turning Insert: DNGA442TN012CA5, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 1.998″ OD, 5.25″ Free Length 0.192″ Wire Dia, 89.463 lb Max Load, 37.302 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 3/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GDM4020GM TN620, Cermet TiCN Finish, Neutral, 4 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Spiral Point Tap: M5 x 0.8, Metric, 2 Flutes, Plug, 6H, High Speed Steel, TiCN Finish 7/8″ Thread Length, 2-3/8″ OAL, Right Hand, D4, Series SPGP
• All-Purpose & Utility Hooks; Overall Length (Inch): 2-1/2; Finish/Coating: Chrome; Maximum Load Capacity: 44.00; Additional Information: Diameter: 64 mm; Minimum Order Quantity: Zinc Alloy; Type: Round Retractable Recessed Hook; Material: Zinc Alloy; Type
• 15/16 Inch Long, Retractable Soft-Close Recessed Hook 66.00 Load Capacity
• Chucking Reamer: 0.1185″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• All-Purpose & Utility Hooks; Overall Length (Inch): 2-1/2; Finish/Coating: Dull Chrome; Maximum Load Capacity: 44.00; Additional Information: Diameter: 64 mm; Minimum Order Quantity: Zinc Alloy; Type: Round Retractable Recessed Hook; Material: Zinc Alloy;
• 15/16 Inch Long, Retractable Soft-Close Recessed Hook 66.00 Load Capacity
• Chucking Reamer: 0.2167″ Dia, 3.6642″ OAL, 1.0244″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Impact Socket: 1/2″ Drive 6-Point, 38 mm OAL
• Impact Socket: 1/2″ Drive 6-Point, 38 mm OAL
• Impact Socket: 1/2″ Drive 6-Point, 38 mm OAL
• Jobber Length Drill Bit: 0.2209″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Jobber Length Drill Bit: 0.2339″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Compression Spring: 1.116″ OD, 2″ Free Length 0.177″ Wire Dia, 123.762 lb Max Load, 264.153 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 0.2813″ Dia, 27/32″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 9/32″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Chamfer Mill: 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Bright/Uncoated
• Screw Machine Length Drill Bit: 0.1181″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Compression Spring: 0.588″ OD, 8.5″ Free Length 0.092″ Wire Dia, 39.417 lb Max Load, 14.324 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.015″ Dia, 0.023″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Point Tap: M4 x 0.7, M & Metric, 3 Flutes, Plug, 6H, GLT-1 Finish 13 mm Thread Length, 63 mm OAL, Right Hand, D4 Series B020C300
• Square End Mill: 1/2'' Dia, 1'' LOC, 1/2'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, 38 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.025'' Dia, 13/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, RH Cut, RH Flute
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.09″ Dia, 0.125″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Combination Wrench: Vanadium Steel, Matte Satin Chrome-Plated
• Ball End Mill: 0.045″ Dia, 0.068″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Chucking Reamer: 0.3745″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Ball End Mill: 0.015″ Dia, 0.023″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: YWMT11T204-ZM T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0160″ Corner Radius, 25.0 &deg N/A Diamond, Series YWMT
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 4 mm Cutting Width, 5 mm Max Depth
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 0.5 mm Cutting Width, 1.5 mm Max Depth
• Screw Machine Length Drill Bit: 0.189″ Dia, 142 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2XDSS
• Corner Radius End Mill: 0.1181″ Dia, 0.2362″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.1 mm Cutting Width, 3 mm Max Depth
• Spiral Flute Tap: MJ6 x 1.00, MJ, 3 Flute, Modified Bottoming, 4H Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.2 mm Cutting Width, 3 mm Max Depth
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Spiral Flute Tap: MJ5 x 0.80, MJ, 3 Flute, Modified Bottoming, 4H Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.4 mm Cutting Width, 3 mm Max Depth
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.6 mm Cutting Width, 4 mm Max Depth
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.8 mm Cutting Width, 4 mm Max Depth
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 2 mm Cutting Width, 4 mm Max Depth
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.5 mm Cutting Width, 3 mm Max Depth, Series 25614
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1 mm Cutting Width, 3 mm Max Depth
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 2.291″ OD, 4.5″ Free Length 0.225″ Wire Dia, 168.233 lb Max Load, 72.079 lb/in Spring Rate, Music Wire
• Turning Insert: RCMT 10 T3 M0 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1969″ Corner Radius, N/A Round, Series RCMT
• Compression Spring: 1.351″ OD, 4.75″ Free Length 0.225″ Wire Dia, 272.973 lb Max Load, 209.717 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.41″ OD, 6.5″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 66.758 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.528″ OD, 6.5″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 56.205 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.58″ OD, 5.5″ Free Length 0.207″ Wire Dia, 192.368 lb Max Load, 86 lb/in Spring Rate, Music Wire
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Right Hand, 0.059″ Cutting Width, Series TQC34
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Left Hand, 0.059″ Cutting Width, Series TQC34
• Jobber Length Drill Bit: 0.1969″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Right Hand, 0.079″ Cutting Width, Series TQC34
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• VBMT333-PR 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 35° Diamond
• VBMT332-PF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 35° Trigon
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Right Hand, 0.079″ Cutting Width, Series TQC34
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Left Hand, 0.079″ Cutting Width, Series TQC34
• VBMT332-PR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 35° Round
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• RNG45T0320 6165 Ceramic Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 5/16″ Thick, Triangle
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Left Hand, 0.079″ Cutting Width, Series TQC34
• Jobber Length Drill Bit: 0.061″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• VBMT332-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 35° Trigon
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.059″ Cutting Width, Series TQC34
• Jobber Length Drill Bit: 0.1299″ Dia, 130 °, Cobalt FIREX Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2458
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TQC34
• Turning Insert: VBMT 16 04 12-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series VBMT-PMC
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Dark Gray Double-Sided Foam Tape: 1/2″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: VBMT 16 04 04-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series VBMT-PMC
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.091″ Cutting Width, Series TQC34
• Corner Chamfer End Mill: 0.7677″ Dia, 1.4961″ LOC, 4 Flute, 0.0157″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated, Centercutting
• Turning Insert: VBMT 16 04 08-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series VBMT-PMC
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Straight; Flute Type: Helical
• Turning Insert: VBMT 16 04 04-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series VBMT-PMC
• Corner Chamfer End Mill: 0.25″ Dia, 0.313″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 1-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 4 Flute, 0.0094″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Press Fit Headless Drill Bushing: P, 0.07″ ID, 3/16″ OD 3/4″ OAL, Carbon Steel
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Turning Insert: VBMT 16 04 08-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series VBMT-PMC
• Press Fit Headed Drill Bushing: Type H, 1/2″ ID, 7/8″ OD
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Press Fit Headed Drill Bushing: Type H, 1/2″ ID, 7/8″ OD
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Square End Mill:
• O-Ring: 4″ ID x 4.87″ OD, 1/4″ Thick, Neoprene Round Cross Section, Black
• Kyocera VBGT 2202FNZ TN60 Grade Uncoated Cermet, 5 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Medium in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Chucking Reamer: 0.397″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• DCMT32.51 Carbide Turning Insert Diamond Finish, 3/8″ Inscribed Circle, 1/64″ Corner Radius, 55° Diamond
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Milling Insert: SDNT 0903AESN-31 CTCK215, CTCK215, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Press Fit Headless Drill Bushing: HM, 3.4″ ID Steel
• Corner Chamfer End Mill: 0.1969″ Dia, 0.2461″ LOC, 4 Flute, 0.0039″ Chamfer Width, Solid Carbide 1-1/2″ OAL, AlTiN Coated, Centercutting
• Compression Spring: 0.823″ OD, 2.75″ Free Length 0.162″ Wire Dia, 128.13 lb Max Load, 271.835 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Chamfer End Mill: 0.2362″ Dia, 0.2953″ LOC, 4 Flute, 0.0047″ Chamfer Width, Solid Carbide 1-1/2″ OAL, AlTiN Coated, Centercutting
• Compression Spring: 0.999″ OD, 2.125″ Free Length 0.177″ Wire Dia, 136.296 lb Max Load, 328.042 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.351″ OD, 4.75″ Free Length 0.135″ Wire Dia, 50.962 lb Max Load, 22.312 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.7874″ Dia, 1.4961″ LOC, 4 Flute, 0.0157″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End