Products

• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Press Fit Headless Drill Bushing: HM, 7.1″ ID Steel
• TCMT21.52-UR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 3/32″ Thick, 60° Diamond
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Flute Tap: M2 x 0.40, Metric, 3 Flute, Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D3 & D4, Series 4630
• Press Fit Headless Drill Bushing: HM, 7.7″ ID Steel
• TCMT21.51-UF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0156″ Corner Radius, 3/32″ Thick, 60° Square
• Ball End Mill: 0.125″ Dia, 0.188″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.062″ Dia, 0.05″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• TCMT222-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 1/8″ Thick, 60° Triangle
• Square End Mill: 3/32'' Dia, 9/64'' LOC, 1/4'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• TCMT21.52-UF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 3/32″ Thick, 60° Triangle
• Compression Spring: 2.703″ OD, 4.75″ Free Length 0.225″ Wire Dia, 143.723 lb Max Load, 51.991 lb/in Spring Rate, Music Wire
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• TCMT21.52-UM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 3/32″ Thick, 60° Trigon
• Corner Radius End Mill Head: 6 Flutes Solid Carbide
• TCMT221-PM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0156″ Corner Radius, 1/8″ Thick, 60° Trigon
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: RCMT 10 T3 M0 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1969″ Corner Radius, N/A Round, Series RCMT
• Turning Insert: VNMG160404-UL YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.6220″ Long, 3/8″ Inscribed Circle, N/A Series VNMG
• TCMT21.51-UR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0156″ Corner Radius, 3/32″ Thick, 60° Diamond
• Latches; Type: Lever Bolt; Length (mm): 49.50; Width (mm): 24.70; Height (mm): 60.0000; Finish/Coating: Satin; Distance Between Mounting Hole Centers: 46; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Description: Weight: 108
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 1/2'' Dia, 3/4'' LOC, 1/2'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Turning Insert: VNMG160404-UF YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.6220″ Long, 3/8″ Inscribed Circle, N/A Series VNMG
• DNMG441-LC 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 1/4″ Thick, 55° Trigon
• Turning Insert: DNMG 15 06 12-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Spiral Flute Tap: M5 x 0.50, Metric Fine, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Impact Socket: 1″ Drive 6-Point
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 1.18; Overall Length (mm): 1.18; Material: Plastic; Projection: 0.488 in; Finish/Coating: Clear; Minimum Order Quantity: Plastic; Material: Plastic; Length (Inch): 1.18; Overal
• Turning Insert: DNMG 15 06 04-MF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Screw Machine Length Drill Bit: 0.0995″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.25″ Dia, 1″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Single End
• Polyimide Film Tape: 1/4″ Wide, 36 yd Long, 2.7 mil Thick 33 Lb/In Tensile Strength, Silicone Adhesive, -99.4 to 500 ° F
• Turning Insert: DNMG 15 06 12-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series DNMG-MR (ISO P)
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: DNMG 15 06 04-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-PMC
• Screw Machine Length Drill Bit: 0.18″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: DNMG 15 06 08-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-PMC
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• 50' Bungee Cord with No End 5/16″ Diam, Polyurethane, Military Green
• Turning Insert: TPMT 16 T3 08-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMT-PM
• Ball End Mill: 0.039″ Dia, 0.059″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• 90° 5/16″ Diam 2-3/8″ OAL Solid Carbide Spotting Drill AlTiN Finish, 0.9″ Flute Length, 5/16″ Shank Diam, RH Cut, Series 8195-H
• Turning Insert: DNMG 15 06 04-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Turning Insert: TPMT 16 T3 08-PM 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMT-PM
• Square End Mill: 7/16'' Dia, 5/8'' LOC, 7/16'' Shank Dia, 2-3/4'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Impact Socket: 3/4″ Drive 6-Point
• Turning Insert: DNMG 15 06 08-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MR (ISO P)
• Turning Insert: TPMT 16 T3 04-PM 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMT-PM
• Tap Sets; Maximum Tap Thread Size (mm): M4 x 0.70; Chamfer: Plug, Bottoming, Taper; Material: High-Speed Steel; Overall Length (Decimal Inch): 2.1250; Overall Length (Inch): 2-1/8
• Turning Insert: DNMG 15 06 12-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series DNMG-MR (ISO P)
• Turning Insert: TPMT 16 T3 04-PF 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Triangle, Series TPMT-PF
• Turning Insert: VNMG160404-UF YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.6220″ Long, 3/8″ Inscribed Circle, N/A Series VNMG
• Ball End Mill: 0.03″ Dia, 0.045″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Turning Insert: DNMG 15 06 12-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series DNMG-PMC
• Turning Insert: TPMT 16 T3 04-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMT-PM
• Turning Insert: TPMT 16 T3 04-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Triangle, Series TPMT-PF
• Turning Insert: DNMG 15 06 16-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series DNMG-MR (ISO P)
• Black Double-Sided Polyethylene Foam Tape: 3/4″ Wide, 72 yd Long, 31 mil Thick, Acrylic Adhesive
• Turning Insert: DNMG 15 06 08-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MF (ISO P)
• 90° 102mm OAL High Speed Steel Spotting Drill Bright/Uncoated, 30mm Flute Length, 12.7mm Shank Diam, RH Cut, Series 557
• Turning Insert: DNMG 15 06 12-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series DNMG-PMC
• 120° 102mm OAL High Speed Steel Spotting Drill Bright/Uncoated, 30mm Flute Length, 12.7mm Shank Diam, RH Cut, Series 556
• Turning Insert: DNMG 15 06 12-MF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Turning Insert: DNMG 15 06 08-MF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Turning Insert: DNMG 15 06 08-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-PMC
• Grooving Insert: GCM2002GF T2500A, Cermet Uncoated, Neutral, 2 mm Cutting Width, 20 mm Max Depth, Series GND
• Turning Insert: DNMG 15 06 04-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-PMC
• Polyester Film Tape: 1/8″ Wide, 36 yd Long, 10.2 mil Thick Acrylic Adhesive, -40 to 149 ° F
• Turning Insert: DNMG 15 06 16-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series DNMG-MR (ISO P)
• Turning Insert: DNMG 15 06 08-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MR (ISO P)
• Turning Insert: DNMG 15 06 04-XF 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Diamond 55 ™, Series DNMG-XF
• Ball End Mill: 0.08″ Dia, 0.24″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.07″ Dia, 0.105″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Drill Bit Set: Hammer Drill Bits, 0.1562″ Drill Bit Sizes135 °, Solid Carbide Standard, Hex Shank
• Ball End Mill: 0.065″ Dia, 0.195″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 2.233″ OD, 7″ Free Length 0.177″ Wire Dia, 64.902 lb Max Load, 17.371 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.1181″ Dia, 2.4803″ OAL, 0.6693″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Ball End Mill: 0.25″ Dia, 4 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 3900L
• Chucking Reamer: 0.1969″ Dia, 3.3858″ OAL, 0.9055″ Flute Length, Straight Shank, Solid Carbide 6 Flute, RH
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 281
• Kyocera ABW15-4015 PR1725 Grade PVD Carbide, 15 Degree, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
• Kyocera ABS15-4015 PR1725 Grade PVD Carbide, 15 Degree, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
• Spiral Point Tap: 5/16-24, UNF & DIN/ANSI, 3 Flutes, Plug, HSS-E, TiAlN Finish 18 mm Thread Length, 90 mm OAL, Right Hand, H7, Series TC217
• Kyocera ABS15-4005 PR1725 Grade PVD Carbide, 15 Degree, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
• Tap Sets; Overall Length (Decimal Inch): 1.7500; Overall Length (Inch): 1-3/4
• Kyocera ABW 15R4005M PR1705 Grade PVD Carbide, 15 Degree, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Continuous and Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, and (M) Stainless Steel
• Tap Sets; Overall Length (Decimal Inch): 1.6250; Overall Length (Inch): 1-5/8
• Kyocera ABS 15R4015M PR1705 Grade PVD Carbide, 15 Degree, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Continuous and Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, and (M) Stainless Steel
• Ball End Mill: 0.09″ Dia, 0.135″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Kyocera ABW 15R4015M PR1705 Grade PVD Carbide, 15 Degree, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Continuous and Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, and (M) Stainless Steel
• Ball End Mill: 0.118″ Dia, 0.625″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.09″ Dia, 0.45″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill Head: 3/16″ Dia, 3/8″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Ball End Mill: 0.07″ Dia, 0.375″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.047″ Dia, 0.141″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Threaded Ring Gage: #12-28 Thread, UNF, Class 2A, No Go
• Ball End Mill: 0.08″ Dia, 0.406″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Threaded Ring Gage: #12-24 Thread, UNC, Class 2A, No Go
• Ball End Mill: 0.06″ Dia, 0.18″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.3779″ OAL, 0.0039″ Corner Radius
• Threaded Ring Gage: M9 x 1.25 Thread, Metric, Class 6G, Go
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.3779″ OAL, 0.0079″ Corner Radius
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Threaded Ring Gage: M9 x 1.25 Thread, Metric, Class 6G, No Go
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Threaded Ring Gage: #12-28 Thread, UNF, Class 2A, Go
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.3779″ OAL, 0.0039″ Corner Radius
• Threaded Ring Gage: #12-24 Thread, UNC, Class 2A, Go
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.05″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Compression Spring: 1.116″ OD, 4.25″ Free Length 0.207″ Wire Dia, 184.396 lb Max Load, 233.445 lb/in Spring Rate, Stainless Steel
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.3779″ OAL, 0.0079″ Corner Radius
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Latches; Type: Corner Fastener with Lock; Length (mm): 64.00; Width (mm): 39.50; Height (mm): 59.0000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 25; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Descri
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.11″ Dia, 0.33″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chamfer Mill: 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, TiB2 Coated
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.078″ Dia, 0.117″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• UHMW Film Tape: 1″ Wide, 10' x 67 mil Thick Acrylic Adhesive, 225 ° F
• Ball End Mill: 0.08″ Dia, 0.12″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.07″ Dia, 0.105″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Screw Machine Length Drill Bit: 0.2656″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.0938″ Dia, 0.0938″ LOC, 3 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, DUROREY Coated, Single End, Series 4630
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.035″ Dia, 0.105″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Impact Socket: 3/8″ Drive 6-Point
• Grooving Insert: GIQR11250020 IC528, Solid Carbide TiCN & TiN Finish, Right Hand, 2.49 mm Cutting Width, 2.31 mm Max Depth, Series ChamGroove
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Press Fit Headless Drill Bushing: HM, 6″ ID Steel
• Corner Radius End Mill: 4 Flutes, Solid Carbide 36, 37 & 38 ° Helix, nano-Si Coated, Corner Chamfer End, Centercutting, Series 6803
• Square End Mill: 3/8'' Dia, 1-1/8'' LOC, 3/8'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, FIREX Finish, Helical Flute, Centercutting, RH Cut, RH Flute, Series 19957
• Corner Radius End Mill: 3 Flutes, Solid Carbide 41, 43 & 45 ° Helix, nano-Si Coated, Corner Chamfer End, Centercutting, Series 6798
• Corner Radius End Mill: 4 Flutes, Solid Carbide 36, 37 & 38 ° Helix, nano-Si Coated, Corner Chamfer End, Centercutting, Series 6803
• SpyroTec 6.3mm Head Diam, 1.6mm Cut Diam, 5mm Shank Diam, 3 Flute 60° High Speed Steel Countersink TiAlN Finish, Single End, 5mm Cylindrical Shank, Right Hand Cut
• O-Ring: 2.55″ ID x 2.756″ OD, 0.103″ Thick, Dash 145, Viton Round Cross Section
• Corner Radius End Mill: 4 Flutes, Solid Carbide 36, 37 & 38 ° Helix, nano-Si Coated, Corner Chamfer End, Centercutting, Series 6803
• Compression Spring: 2.82″ OD, 6.75″ Free Length 0.225″ Wire Dia, 97.658 lb Max Load, 28.957 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.585″ OD, 4.75″ Free Length 0.225″ Wire Dia, 149.99 lb Max Load, 55.703 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.04″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Compression Spring: 2.82″ OD, 4.75″ Free Length 0.225″ Wire Dia, 138.001 lb Max Load, 48.789 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 6.25″ Free Length 0.177″ Wire Dia, 89.796 lb Max Load, 34.395 lb/in Spring Rate, Stainless Steel
• Tap Sets; Overall Length (Decimal Inch): 1.7500; Overall Length (Inch): 1-3/4
• Compression Spring: 1.175″ OD, 6.25″ Free Length 0.112″ Wire Dia, 35.246 lb Max Load, 10.805 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/16'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Ball End Mill: 0.1969″ Dia, 0.2362″ LOC, 2 Flute, Solid Carbide 56.5 mm OAL, 6 mm Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Grooving Insert: BA, Solid Carbide Uncoated, Neutral, 3 mm Cutting Width, 5 mm Max Depth, Series 25607
• Grooving Insert: BA, Solid Carbide Uncoated, Neutral, 3 mm Cutting Width, 5 mm Max Depth, Series 25607
• Corner Radius End Mill: 0.02″ Dia, 0.1″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Grooving Insert: BA, Solid Carbide Uncoated, Neutral, 2.5 mm Cutting Width, 5 mm Max Depth, Series 25607
• Corner Radius End Mill: 1/64″ Dia, 5/64″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• UHMW Film Tape: 6″ Wide, 5 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Corner Radius End Mill: 0.02″ Dia, 0.1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Compression Spring: 1.998″ OD, 3.5″ Free Length 255.902 lb Max Load, 187.965 lb/in Spring Rate, Music Wire
• Tap Sets; Overall Length (Decimal Inch): 1.8750; Overall Length (Inch): 1-7/8
• O-Ring: 0.69″ ID x 1.03″ OD, 1/4″ Thick, Polytetrafluroethylene Envelope Nitrile Butadiene Rubber Round Cross Section
• Compression Spring: 2.115″ OD, 9″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 16.644 lb/in Spring Rate, Music Wire
• Compression Spring: 2.174″ OD, 3.5″ Free Length 236.629 lb Max Load, 158.497 lb/in Spring Rate, Music Wire
• Square End Mill: 3/8'' Dia, 1/2'' LOC, 3/8'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, 35 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Compression Spring: 1.937″ OD, 3.5″ Free Length 256.368 lb Max Load, 198 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 3″ Free Length 0.162″ Wire Dia, 79.395 lb Max Load, 67.694 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 8″ Free Length 0.177″ Wire Dia, 131.397 lb Max Load, 35.362 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 6 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Nano Coated, Single End
• Compression Spring: 1.586″ OD, 3″ Free Length 0.162″ Wire Dia, 71.102 lb Max Load, 54.66 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 6 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Nano Coated, Single End
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Ball End Mill: 0.5″ Dia, 1″ LOC, 4 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Compression Spring: 2.644″ OD, 4.5″ Free Length 0.207″ Wire Dia, 83.454 lb Max Load, 37.162 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Bright/Uncoated
• Compression Spring: 1.175″ OD, 7.5″ Free Length 0.105″ Wire Dia, 29.61 lb Max Load, 7.15 lb/in Spring Rate, Stainless Steel
• Turning Insert: RCMT 16 06 M0 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3150″ Corner Radius, N/A Round, Series RCMT
• Turning Insert: SPGN322QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 90.0 &deg N/A Square, Series SPGN
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Point Tap: 7/16-20, UNF, 3 Flutes, Plug, VC-10 Finish 0.858″ Thread Length, 3.93″ OAL, Right Hand, H5, Series 316
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Spiral Point Tap: 7/16-14, UNC, 3 Flutes, Plug, VC-10 Finish 0.858″ Thread Length, 3.93″ OAL, Right Hand, H5, Series 316
• Spiral Point Tap: 7/16-14, UNC, 3 Flutes, Plug, VC-10 Finish 0.858″ Thread Length, 3.93″ OAL, Right Hand, H3, Series 316
• Ball End Mill: 0.093″ Dia, 0.139″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Spiral Point Tap: 7/16-20, UNF, 3 Flutes, Plug, VC-10 Finish 0.858″ Thread Length, 3.93″ OAL, Right Hand, H3, Series 316
• Square End Mill: 5/64'' Dia, 0.24'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• PARALLEL POS RAKE RH Carbide Milling Insert Megacoat Nano Finish, 1/8″ Thick
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Tap Sets; Overall Length (Decimal Inch): 1.9375; Overall Length (Inch): 1-15/16
• Compression Spring: 2.233″ OD, 8.5″ Free Length 160.326 lb Max Load, 50.664 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 2.233″ OD, 3.5″ Free Length 230.787 lb Max Load, 150.514 lb/in Spring Rate, Music Wire
• Tap Sets; Overall Length (Decimal Inch): 2.0000; Overall Length (Inch): 2
• Compression Spring: 1.351″ OD, 5.75″ Free Length 0.207″ Wire Dia, 217.732 lb Max Load, 116.391 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.88″ OD, 8″ Free Length 0.207″ Wire Dia, 160.849 lb Max Load, 41.456 lb/in Spring Rate, Music Wire
• Clear Double-Sided Polyester Film Tape: 1″ Wide, 1 yd Long, 8.3 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Compression Spring: 0.823″ OD, 5.75″ Free Length 0.112″ Wire Dia, 49.119 lb Max Load, 22.887 lb/in Spring Rate, Stainless Steel
• Milling Insert: MH20-060320E-L30 S30T, S30T, Solid Carbide N/A Finish,
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Compression Spring: 1.528″ OD, 6.5″ Free Length 36.876 lb Max Load, 10.114 lb/in Spring Rate, Stainless Steel
• Milling Insert: MH20-060320E-L30 1040, 1040, Solid Carbide N/A Finish,
• Ball End Mill: 0.035″ Dia, 0.105″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Milling Insert: MH20-060320E-L30 S40T, S40T, Solid Carbide N/A Finish,
• Chucking Reamer: 0.198″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Ball End Mill: 0.08″ Dia, 0.24″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• 1-1/8″ OAL, 1/2″ Head Diam, 2 Flute, 100° Incl Angle, Integral Pilot, Adjustable Stop Countersink 1/4-28 Straight Threaded Shank, 1-3/4″ Shank Len, 3/16″ Shank Diam, 3/32″ Pilot Diam, High Speed Steel
• Ball End Mill: 0.031″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Clear Double-Sided Acrylic Tape: 2″ Wide, 40 mil Thick, Acrylic Adhesive
• Chucking Reamer: 13/64″ Dia, 5″ OAL, 1-1/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Chucking Reamer: 29/64″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel RH
• Chucking Reamer: 1/8″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Chucking Reamer: 0.0292″ Dia, 1-3/8″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 3 Flute
• Boring Bar: 5 mm Min Bore, 1 mm Max Depth, Right Hand Cut, Solid Carbide 6 mm Shank Dia, 57 mm OAL
• Chucking Reamer: 0.201″ Dia, 5″ OAL, 1-1/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Compression Spring: 1.293″ OD, 5″ Free Length 0.225″ Wire Dia, 283.564 lb Max Load, 222.873 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.1929″ Dia, 140 °, Solid Carbide WD1 Finish, Series HP243
• Compression Spring: 1.586″ OD, 6.75″ Free Length 0.192″ Wire Dia, 153.127 lb Max Load, 50.049 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.125″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Single End
• Electronic Depth Gages; Minimum Measurement (mm): 0; Maximum Measurement (Decimal Inch): 4; Maximum Measurement (mm): 100; Resolution (mm): 0.01; Resolution (Decimal Inch): 0.0005; Base Length (mm): 2.0000; Base Length (Inch): 2.0000; Accuracy (Decimal In
• Kyocera NDCT 831RB TN100M Grade Uncoated Cermet, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel
• Compression Spring: 1.175″ OD, 6.75″ Free Length 0.162″ Wire Dia, 93.919 lb Max Load, 41.017 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 5/16″ Dia, 0.812″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Square End Mill: 1/16'' Dia, 3/16'' LOC, 3/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6484
• Tap Sets; Overall Length (Decimal Inch): 2.1250; Overall Length (Inch): 2-1/8
• Turning Insert: VBGW3305TM-2 WBH10, Neutral, 3/8″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.015″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Turning Insert: VBGW221TM-2 WBH10, Neutral, 1/4″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 3/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6484
• Turning Insert: VBGW221TM-2 WBH20, Neutral, 1/4″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Turning Insert: VBGW3305TM-2 WBH20, Neutral, 3/8″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Chucking Reamer: 3/16″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Jobber Length Drill Bit: 0.4688″ Dia, 135 °, Cobalt Bright/Uncoated, 5.75″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: 2QP-CCGW21.52 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Jobber Length Drill Bit: 0.323″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: 2QP-DCGW32.51 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: 2QP-DCGW32.50.5 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: 2QP-DCGW21.50.5 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Kyocera CCMT 3251HQ CA5525 Grade CVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing-Medium in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 45 ° Helix, AlCrN Coated, Centercutting, Series XPR
• Turning Insert: 2QP-CPGW320.5 BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CPGW
• Square End Mill: 0.045'' Dia, 0.067'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: 2QP-DCGW32.50.2 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 3/8″ Inscribed Circle, 0.0040″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: RCMX 12 04 00 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.2362″ Corner Radius, N/A Series RCMX
• Turning Insert: RCMX 12 04 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.2362″ Corner Radius, N/A Series RCMX
• Turning Insert: 2QP-CPGW2.51.52 BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CPGW
• Turning Insert: 2QP-CPGW2.51.51 BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CPGW