Products

• Double Angle Milling Cutter: 90 °, 1/8″ Cut Dia, 0.073″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, AlTiN Coated, 4 Teeth
• Dovetail Cutter: 6 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Compression Spring: 0.411″ OD, 2.625″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 2.804 lb/in Spring Rate, Music Wire
• Dovetail Cutter: 1 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Compression Spring: 2.409″ OD, 7″ Free Length 0.207″ Wire Dia, 91.24 lb Max Load, 26.514 lb/in Spring Rate, Stainless Steel
• Switch for #20242905
• Dovetail Cutter: 2 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Slitting & Slotting Saw: 1″ Dia, 0.02″ Thick, 3/8″ Arbor Hole, 12 Teeth, Solid Carbide Bright/Uncoated
• Corner Radius End Mill: 0.025″ Dia, 1/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Screw Machine Length Drill Bit: 0.1063″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Combo Drill & Countersink:120 ™, High Speed Steel Coated Finish, Right Hand Cut, Series V95
• White Double-Sided Polyethylene Foam Tape: 1″ Wide, 5 yd Long, 62 mil Thick, Acrylic Adhesive
• Combo Drill & Countersink:120 ™, High Speed Steel Coated Finish, Right Hand Cut, Series V95
• Combo Drill & Countersink:120 ™, High Speed Steel Coated Finish, Right Hand Cut, Series V95
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Square End Mill: 1/32'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Combo Drill & Countersink:120 ™, High Speed Steel Coated Finish, Right Hand Cut, Series V95
• Spiral Flute Tap: M6 x 1.00, DIN, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Hardlube Finish 1.26″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Square End Mill: 5/16'' Dia, 13/16'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: M4 x 0.70, DIN, 3 Flute, Modified Bottoming, 6H Class of Fit, Hardlube Finish 0.827″ Thread Length, 2.4803″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Compression Spring: 0.411″ OD, 2.375″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 2.703 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Compression Spring: 0.411″ OD, 1″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 19.082 lb/in Spring Rate, Stainless Steel
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Different; Maximum Thickness: 3/32; Fastening Style: Nut; Camlo
• Compression Spring: 0.47″ OD, 0.938″ Free Length 0.049″ Wire Dia, 8.735 lb Max Load, 19.012 lb/in Spring Rate, Stainless Steel
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 13/64; Fastening Style: Nut; Camlock
• Woodruff Keyseat Cutter: 0.5″ Cut Dia, 0.0313″ Cut Width, 1/2″ Shank Dia, Straight Tooth 2″ OAL, 10 Teeth, High Speed Steel
• Compression Spring: 0.294″ OD, 3″ Free Length 0.045″ Wire Dia, 13.365 lb Max Load, 11.308 lb/in Spring Rate, Music Wire
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 3/32; Fastening Style: Nut; Camlock S
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 7/8; Fastening Style: Nut; Camlock St
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, 35 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 7/8; Fastening Style: Nut; Camlock St
• Ball End Mill: 0.375″ Dia, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, Uncoated, Single End, Series 2014
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Different; Maximum Thickness: 13/64; Fastening Style: Nut; Caml
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 7/8; Fastening Style: Nut; Camlock St
• Screw Machine Length Drill Bit: 0.059″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Compression Spring: 0.999″ OD, 1.5″ Free Length 0.162″ Wire Dia, 108.601 lb Max Load, 329.499 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.705″ OD, 4″ Free Length 0.105″ Wire Dia, 47.603 lb Max Load, 36.074 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 4″ Free Length 38.293 lb Max Load, 17.87 lb/in Spring Rate, Stainless Steel
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 13/64; Fastening Style: Nut; Camlock
• Press Fit Headless Drill Bushing: P, 21/32″ ID, 1-3/8″ OD 1-3/8″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 25/32″ ID, 1-3/8″ OD 1-3/8″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 3/4″ ID, 1-3/8″ OD 1-3/8″ OAL, Carbon Steel
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 3/32; Fastening Style: Nut; Camlock S
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 7/8; Fastening Style: Nut; Camlock St
• Camlocks, Side Latches & Pawl Latches; Lock Type: 4-Cam Locks all Openings Lock; Standard; All Purpose Cam Lock; Standard Cam Locks; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Different; Maximum Thickness: 7/8; Fastening Style: Nut; Camloc
• Compression Spring: 1.175″ OD, 2.625″ Free Length 0.125″ Wire Dia, 47.326 lb Max Load, 40.57 lb/in Spring Rate, Stainless Steel
• Catches; Type: High Temperature Magnetic Catch; Length (mm): 39.00; Height (mm): 7.0000; Width (mm): 11.00; Finish/Coating: Plain; Magnetic Force: 4.4; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Material: 304 Stainless Ste
• Jobber Length Drill Bit: 0.311″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Recycled Rubber Wheel Chock: 10″ OAW, 6″ OAH
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 2-3/4; Additional Information: Knuckles: 2; Hand: Right; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Material:
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Residential Hinges; Type: Weld-On Lift-Off Hinge; Width (Inch): 2-3/4; Additional Information: Knuckles: 2; Hand: Left; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Pin Type: Non-removable; Material:
• Square End Mill: 7/16'' Dia, 2'' LOC, 7/16'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Damping Stays; Type: Lid Stay; Capacity: 12; 26.500; Overall Length (mm): 210.0000; Thickness (mm): 30.00; Width (mm): 40.00; Side: Universal; Maximum Opening: 90.000; Finish/Coating: White; Satin; Mounting Hole Size Diameter: 4.000; Applications: For Dow
• Badge Holders; Attachment Method: Clip-On, Slide-In/Out, Hanging, Cord Mounted; Material: Vinyl; Horizontal/Vertical Holder: Horizontal; Overall Height: 3 in; Overall Length: 4 in; Color: Clear
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.823″ OD, 4.75″ Free Length 0.098″ Wire Dia, 34.373 lb Max Load, 16.43 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.056″ OD, 7″ Free Length 0.192″ Wire Dia, 119.999 lb Max Load, 30.991 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Compression Spring: 2.174″ OD, 4″ Free Length 0.192″ Wire Dia, 113.79 lb Max Load, 50.344 lb/in Spring Rate, Music Wire
• Compression Spring: 2.233″ OD, 5.25″ Free Length 0.177″ Wire Dia, 88.428 lb Max Load, 27.118 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.3438″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 2.291″ OD, 5.25″ Free Length 0.177″ Wire Dia, 86.276 lb Max Load, 26.131 lb/in Spring Rate, Music Wire
• Milling Insert: KDMB0750M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 0.7500″ OAW
• Square End Mill: 3/8'' Dia, 9/16'' LOC, 3/8'' Shank Dia, 2'' OAL, 5 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series SM5F
• Compression Spring: 0.881″ OD, 2.625″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 72.005 lb/in Spring Rate, Stainless Steel
• Straight Flutes Tap: 1/2-20, UNF, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, Bright/Uncoated 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series 725
• Milling Insert: WHH15X, Solid Carbide N/A Finish,
• Milling Insert: KDMB20M0ERHC, KCPK25, Cast Iron & Steel N/A Finish, 0.7874″ OAW
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 2 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, Bright/Uncoated, Centercutting
• Compression Spring: 1.88″ OD, 6.5″ Free Length 0.162″ Wire Dia, 81.484 lb Max Load, 20.644 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.625″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 4.006 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Downcut Flute, 40 ° Helix, RH Cut, RH Flute
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 2 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Compression Spring: 1.939″ OD, 3.25″ Free Length 0.207″ Wire Dia, 156.254 lb Max Load, 101.897 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.125″ Free Length 0.042″ Wire Dia, 6.457 lb Max Load, 11.1 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 2 Flute, 0.0047″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Tapered End Mill: 15 ° per Side, 0.03″ Small Dia, 0.19″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, Uncoated, Runner Cutters - For Non-Ferrous Materials
• Compression Spring: 1.41″ OD, 6″ Free Length 0.162″ Wire Dia, 106.934 lb Max Load, 36.702 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.5″ Free Length 0.042″ Wire Dia, 8.117 lb Max Load, 9.385 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 5/8″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 5/8″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Tapered End Mill: 20 ° per Side, 0.03″ Small Dia, 0.19″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, Uncoated, Runner Cutters - For Non-Ferrous Materials
• Compression Spring: 1.41″ OD, 4″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 112.912 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 0.688″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 29.13 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 2 Flute, 0.0063″ Chamfer Width, Solid Carbide 3.62 mm OAL, ZrN Coated, Centercutting
• White Double-Sided Foam Tape: 3/4″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Tapered End Mill: 15 ° per Side, 0.02″ Small Dia, 0.205″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, Uncoated, Runner Cutters - For Non-Ferrous Materials
• Compression Spring: 0.411″ OD, 0.75″ Free Length 0.049″ Wire Dia, 9.902 lb Max Load, 30.94 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.47″ OD, 2.5″ Free Length 0.038″ Wire Dia, 5.404 lb Max Load, 3.206 lb/in Spring Rate, Music Wire
• Double Angle Milling Cutter: 90 °, 1/8″ Cut Dia, 0.073″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, AlTiN Coated, 4 Teeth
• Tapered End Mill: 10 ° per Side, 0.03″ Small Dia, 0.19″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, Uncoated, Runner Cutters - For Non-Ferrous Materials
• Compression Spring: 0.97″ OD, 1.75″ Free Length 0.063″ Wire Dia, 11.562 lb Max Load, 9.85 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3 Flutes Helix
• Milling Inserts; Insert Style: XB1D; Insert Size: 048; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 5/8; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Series: XB1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals):
• Square End Mill: 3/32'' Dia, 0.273'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Downcut Flute, 40 ° Helix, RH Cut, RH Flute
• Compression Spring: 0.235″ OD, 2.75″ Free Length 0.047″ Wire Dia, 18.21 lb Max Load, 26.747 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XR1D; Insert Size: 04808; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 5/8; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Tapered End Mill: 7 ° per Side, 0.286″ LOC, 2 Flutes, Solid Carbide, Ball End 1″ Shank Dia, 1-1/2″ OAL, AlTiN Finish, Series Runner Cutters
• Compression Spring: 0.294″ OD, 2″ Free Length 0.038″ Wire Dia, 8.406 lb Max Load, 8.669 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XR1D; Insert Size: 04802; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 5/8; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Tapered End Mill: 7 ° per Side, 0.401″ LOC, 2 Flutes, Solid Carbide, Ball End 1″ Shank Dia, 1-1/2″ OAL, AlTiN Finish, Series Runner Cutters
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Milling Inserts; Insert Style: XR1D; Insert Size: 04804; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 5/8; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Compression Spring: 0.294″ OD, 1.375″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 5.855 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 4 mm Cutting Width, 5 mm Max Depth
• Milling Inserts; Insert Style: XR1D; Insert Size: 04801; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 5/8; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Tapered End Mill: 20 ° per Side, 0.02″ Small Dia, 0.205″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, Uncoated, Runner Cutters - For Non-Ferrous Materials
• Compression Spring: 0.294″ OD, 2.25″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 4.038 lb/in Spring Rate, Music Wire
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 1 mm Cutting Width, 3 mm Max Depth
• Corner Radius End Mill: 3 Flutes, Solid Carbide 39, 40 & 41 ° Helix, Carbo Coated, Corner Chamfer End, Centercutting, Series 6979
• Ball End Mill: 0.3125″ Dia, 3 Flute, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Square End Mill: 1/16'' Dia, 0.186'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Downcut Flute, 40 ° Helix, RH Cut, RH Flute
• Compression Spring: 0.294″ OD, 1.75″ Free Length 0.038″ Wire Dia, 8.406 lb Max Load, 9.963 lb/in Spring Rate, Music Wire
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 1.1 mm Cutting Width, 3 mm Max Depth, Series 25615
• Compression Spring: 0.294″ OD, 1.25″ Free Length 0.04″ Wire Dia, 7.697 lb Max Load, 15.141 lb/in Spring Rate, Stainless Steel
• Tapered End Mill: 10 ° per Side, 0.02″ Small Dia, 0.205″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, Uncoated, Runner Cutters - For Non-Ferrous Materials
• Corner Radius End Mill: 0.031″ Dia, 3/64″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 1.4 mm Cutting Width, 3 mm Max Depth
• Compression Spring: 0.294″ OD, 1.5″ Free Length 0.04″ Wire Dia, 9.681 lb Max Load, 14.347 lb/in Spring Rate, Music Wire
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 1.6 mm Cutting Width, 4 mm Max Depth
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.0157″ Dia, 0.0472″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 0.294″ OD, 1.125″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 23.786 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0157″ Dia, 0.0236″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, TiB2 Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 0.5 mm Cutting Width, 1.5 mm Max Depth
• Compression Spring: 0.294″ OD, 1.5″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 17.487 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 1-1/8″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1035
• Compression Spring: 0.823″ OD, 5.5″ Free Length 0.092″ Wire Dia, 28.99 lb Max Load, 11.106 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.821″ OD, 5″ Free Length 0.177″ Wire Dia, 107.424 lb Max Load, 39.299 lb/in Spring Rate, Music Wire
• Compression Spring: 1.939″ OD, 8.5″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 20.67 lb/in Spring Rate, Music Wire
• 120° 3mm Diam 80mm OAL Cobalt Spotting Drill Bright/Uncoated, 10mm Flute Length, 3mm Shank Diam
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 1.41″ OD, 2.875″ Free Length 0.225″ Wire Dia, 262.92 lb Max Load, 332.979 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 2.375″ Free Length 0.148″ Wire Dia, 57.949 lb Max Load, 54.241 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 2.75″ Free Length 0.225″ Wire Dia, 244.756 lb Max Load, 288.109 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 2.75″ Free Length 0.225″ Wire Dia, 236.672 lb Max Load, 264.021 lb/in Spring Rate, Music Wire
• Compression Spring: 0.353″ OD, 1.5″ Free Length 0.068″ Wire Dia, 34.727 lb Max Load, 96.144 lb/in Spring Rate, Music Wire
• Turning Insert: DCGT32.51SA TT9080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.4570″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Compression Spring: 0.411″ OD, 2″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 3.712 lb/in Spring Rate, Music Wire
• Hook & Loop; Shape: Roll; Tape Width: 1.00 in; Color: Black; Roll Length (yd): 5.00; Component Type: Hook & Loop
• Turning Insert: DCGT32.50.5SA TT9020, Solid Carbide TiCN Finish, Neutral, 0.4570″ Long, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Hook & Loop; Shape: Roll; Tape Width: 1.00 in; Color: Black; Roll Length (yd): 5.00; Component Type: Hook & Loop
• Compression Spring: 0.411″ OD, 2.625″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 2.438 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.875″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 2.554 lb/in Spring Rate, Music Wire
• CCMT432EGU-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 12.9mm Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 80° Included Angle, Series AC4000K
• Compression Spring: 0.411″ OD, 1.5″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 5.753 lb/in Spring Rate, Stainless Steel
• CCMT432EGU-AC4010K Carbide Turning Insert Al2O3/TiCN Finish, 12.9mm Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 80° Included Angle, Series AC4000K
• Compression Spring: 0.411″ OD, 2.125″ Free Length 0.038″ Wire Dia, 6.143 lb Max Load, 4.598 lb/in Spring Rate, Music Wire
• Compression Spring: 1.116″ OD, 5″ Free Length 0.177″ Wire Dia, 168.625 lb Max Load, 107.623 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.625″ Free Length 0.04″ Wire Dia, 7.087 lb Max Load, 7.262 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 3″ Free Length 0.045″ Wire Dia, 9.831 lb Max Load, 5.834 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 3.5″ Free Length 0.045″ Wire Dia, 9.831 lb Max Load, 4.978 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 0.938″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 20.496 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.26; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 10.26; Extension Force:
• Compression Spring: 0.411″ OD, 2.625″ Free Length 0.047″ Wire Dia, 11.089 lb Max Load, 7.855 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.26; Load Capacity: 100 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 10.26; Extension Force:
• Compression Spring: 0.411″ OD, 2.25″ Free Length 0.047″ Wire Dia, 11.089 lb Max Load, 9.222 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.26; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 10.26; Extension Force:
• Compression Spring: 0.764″ OD, 4″ Free Length 0.105″ Wire Dia, 44.27 lb Max Load, 30.133 lb/in Spring Rate, Stainless Steel
• Label Holders; Label Holder Style: Slide-in; Length (Inch): 6 in; Material: PVC
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 18.26; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Threaded End; Compressed Length: 10.26; Extension Force:
• Compression Spring: 0.411″ OD, 2″ Free Length 0.049″ Wire Dia, 12.443 lb Max Load, 12.197 lb/in Spring Rate, Music Wire
• Swivel Top Plate Caster: Rubber, 8″ Wheel Dia, 2-1/2″ Wheel Width, 220 lb Capacity, 10″ OAH 3.9375″ Plate Length, 4.5″ Plate Width, No Brake
• Milling Inserts; Insert Style: XB1D; Insert Size: 024; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XB1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals):
• Compression Spring: 2.115″ OD, 4″ Free Length 0.192″ Wire Dia, 116.813 lb Max Load, 52.592 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 3″ Free Length 0.049″ Wire Dia, 12.443 lb Max Load, 7.994 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XR1D; Insert Size: 02401; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Compression Spring: 0.97″ OD, 4″ Free Length 0.135″ Wire Dia, 69.315 lb Max Load, 49.455 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.47″ OD, 2.625″ Free Length 0.045″ Wire Dia, 8.663 lb Max Load, 5.383 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XR1D; Insert Size: 02404; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Compression Spring: 0.411″ OD, 2″ Free Length 0.055″ Wire Dia, 17.103 lb Max Load, 19.13 lb/in Spring Rate, Music Wire
• Milling Inserts; Insert Style: XR1D; Insert Size: 02402; Insert Material: Solid Carbide; Material Grade: Micrograin; Length (Inch): 3/8; Thickness Range (Decimal Inch): 0.1000 to 0.1250; Series: XR1D; Coating/Finish: DLC; Width (Decimal Inch - 4 Decimals)
• Compression Spring: 0.999″ OD, 7.5″ Free Length 0.085″ Wire Dia, 19.46 lb Max Load, 4.452 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.235″ OD, 2.875″ Free Length 0.045″ Wire Dia, 16.222 lb Max Load, 20.739 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 6.5″ Free Length 0.105″ Wire Dia, 25.906 lb Max Load, 6.75 lb/in Spring Rate, Stainless Steel
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 4.5700; Material: Steel
• Compression Spring: 1.939″ OD, 5″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 35.454 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 2.125″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 4.283 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.252″ Dia, 140 °, Solid Carbide Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series B966A
• Compression Spring: 0.294″ OD, 2.875″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 3.14 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 3.25″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 2.771 lb/in Spring Rate, Music Wire
• Safes; Type: Drop Box; Internal Width (Inch): 9-3/4; Internal Height (Inch): 7-3/4; Internal Depth (Inch): 3; External Width (Inch): 9-3/4; External Height (Inch): 7-3/4; External Depth (Inch): 3; UL Fire Rating (Hours): Not Rated
• Compression Spring: 0.294″ OD, 1.25″ Free Length 0.035″ Wire Dia, 5.314 lb Max Load, 9.009 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 2.25″ Free Length 0.035″ Wire Dia, 6.698 lb Max Load, 5.608 lb/in Spring Rate, Music Wire
• Compression Spring: 1.821″ OD, 6.5″ Free Length 193.546 lb Max Load, 99.975 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 1.875″ Free Length 0.038″ Wire Dia, 8.406 lb Max Load, 9.271 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 1.125″ Free Length 0.04″ Wire Dia, 7.697 lb Max Load, 16.952 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 19.68; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.68;
• Compression Spring: 0.294″ OD, 1.625″ Free Length 0.04″ Wire Dia, 9.681 lb Max Load, 13.186 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.2756″ Dia, 140 °, Solid Carbide Multilayer TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series B966
• Compression Spring: 0.294″ OD, 1″ Free Length 0.042″ Wire Dia, 8.804 lb Max Load, 23.506 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: M10 x 1.5, Metric, 3 Flutes, Plug, 6HX, Powdered Metal High Speed Steel, Sirius Finish 100 mm OAL, Right Hand, D7/D8, Series 4646
• Compression Spring: 0.353″ OD, 2.875″ Free Length 0.032″ Wire Dia, 4.394 lb Max Load, 2.358 lb/in Spring Rate, Music Wire
• Square End Mill: 1/4'' Dia, 1-1/4'' LOC, 1/4'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5
• Compression Spring: 0.294″ OD, 2.125″ Free Length 0.051″ Wire Dia, 18.766 lb Max Load, 28 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 3.25″ Free Length 0.045″ Wire Dia, 13.365 lb Max Load, 10.413 lb/in Spring Rate, Music Wire
• White Double-Sided Foam Tape: 3/8″ Wide, 5 yd Long, 25 mil Thick, Acrylic Adhesive
• White Double-Sided Urethane Foam Tape: 2″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• Compression Spring: 2.115″ OD, 5.25″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 29.392 lb/in Spring Rate, Music Wire
• Camlocks, Side Latches & Pawl Latches; Lock Type: Standard; Deadbolt Cabinet & Drawer; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Alike; Maximum Thickness: 1/4; Fastening Style: Nut; Camlock Style: Straight; Finish/Coating: 304 Stainless S
• SpyroTec 8.3mm Head Diam, 2mm Cut Diam, 6mm Shank Diam, 3 Flute 90° Cobalt Countersink TiAlN Finish, Single End, 6mm Straight Shank, Right Hand Cut
• Chucking Reamer: 0.2283″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Chucking Reamer: 0.126″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, Cobalt 4 Flute
• High Temperature Masking Tape: 1-1/2″ Wide, 60 yd Long, 6.3 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Compression Spring: 1.586″ OD, 2.25″ Free Length 315.419 lb Max Load, 548.442 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.2343″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Square End Mill: 5/64'' Dia, 0.118'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.047″ Dia, 0.07″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Single End
• Ball End Mill: 0.031″ Dia, 0.046″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.015″ Dia, 0.023″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.025″ Dia, 0.02″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.015″ Dia, 0.023″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.5″ Dia, 2 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Single End, Series 2015
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• CCGW21.50T0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick
• Corner Radius End Mill: 3/16″ Dia, 0.281″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Camlocks, Side Latches & Pawl Latches; Lock Type: Standard; Deadbolt Cabinet & Drawer; Body Diameter: 0.7500; Body Diameter: .75; Key Type: Keyed Different; Maximum Thickness: 1/4; Fastening Style: Nut; Camlock Style: Straight; Finish/Coating: 304 Stainle
• CCGW21.51S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick
• Ball End Mill: 0.023″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Jobber Length Drill Bit: 0.1562″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• DCGW21.51S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• DCGW21.52S0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 0.0937″ Thick
• Corner Radius End Mill: 3/8″ Dia, 2″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• DCGW21.50T0320F 7125 CBN Turning Insert AlTiCrN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick
• Compression Spring: 0.411″ OD, 2.125″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 3.031 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• DCGW21.51S0530F 7135 CBN Turning Insert Uncoated, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick
• Compression Spring: 0.411″ OD, 2.25″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 3.286 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1562″ Dia, 15/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• CCGW21.51S0530F 7135 CBN Turning Insert Uncoated, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick
• Compression Spring: 0.411″ OD, 2.75″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 2.325 lb/in Spring Rate, Stainless Steel
• Woodruff Keyseat Cutter: 0.093″ Cut Dia, 0.025″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Compression Spring: 0.411″ OD, 2.125″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 3.998 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.1562″ Dia, 15/64″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• 1/8″ x 50' Buna-N Round Cord Stock 250°F Max, Shore 70A, 2,050 psi Tensile Strength, Black
• Spiral Point Tap: M2 x 0.4, Metric, 2 Flutes, Plug, 6H, Powdered Metal, GLT-1 Finish 45 mm OAL, Right Hand, D3, Series B020A601
• Compression Spring: 0.411″ OD, 1″ Free Length 0.042″ Wire Dia, 6.457 lb Max Load, 12.615 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 9/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• 1/8″ x 25' Buna-N Round Cord Stock 250°F Max, Shore 90A, 2,000 psi Tensile Strength, Black