Products

• Compression Spring: 0.411″ OD, 0.813″ Free Length 0.049″ Wire Dia, 9.902 lb Max Load, 28.233 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Bright/Uncoated 0.75″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H5, Series 774
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.411″ OD, 0.75″ Free Length 0.055″ Wire Dia, 13.6 lb Max Load, 49.125 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.235″ OD, 0.813″ Free Length 0.047″ Wire Dia, 14.493 lb Max Load, 85.976 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.156″ Dia, 15/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.294″ OD, 1.5″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 5.345 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 1.875″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 4.238 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 1.25″ Free Length 0.038″ Wire Dia, 6.679 lb Max Load, 12.354 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Bright/Uncoated 0.75″ Thread Length, 2.5″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 774
• Compression Spring: 0.294″ OD, 1.75″ Free Length 0.04″ Wire Dia, 7.697 lb Max Load, 10.608 lb/in Spring Rate, Stainless Steel
• Woodruff Keyseat Cutter: 0.093″ Cut Dia, 0.093″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Compression Spring: 0.294″ OD, 1.25″ Free Length 0.045″ Wire Dia, 10.636 lb Max Load, 24.667 lb/in Spring Rate, Stainless Steel
• UHMW Film Tape: 2″ Wide, 5 yd Long, 10 mil Thick 80 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Kyocera SNMG 433PS CA5535 Grade CVD Carbide, 0 Degree, Square, Negative Rake Angle, Neutral Turning Insert for Heavy Interruption and Medium-Roughing in (P) Carbon/Alloy Steel
• Recessed Pulls; Overall Width (Inch): 3-35/64; Overall Height (mm): 24.00000; Recess Width: 52.00; Recess Height: 12.00; Recess Depth: 1.00; Center to Center: 76.0000; Finish/Coating: Satin; Material: Stainless Steel; Material: Stainless Steel
• All-Purpose & Utility Hooks; Overall Length (Inch): 1-11/16; Overall Length (mm): 43.0000; Finish/Coating: Satin; Maximum Load Capacity: 17.60; Additional Information: Width: 18 mm; Projection:30 mm; Height: 70 mm; Distance Between Mounting Holes: 23 mm;
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Kyocera SNMG 432XS CA5525 Grade CVD Carbide, 0 Degree, Square, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Roughing in (P) Carbon/Alloy Steel
• Catches; Type: Tension Catch; Length (mm): 48.00; Height (mm): 24.9000; Width (mm): 13.50; Finish/Coating: Chrome; Strike Length: 42.00; Strike Width: 11.00; Minimum Order Quantity: Zinc Alloy; Material: Zinc Alloy; Strike Width: 11.00; Strike Length: 42.
• Edge Pulls; Width (Inch): 3-47/64; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 65.0000; Material Grade: 304; Finish/Coating: Satin; Material: Stainless Steel; Material: Stainless Steel
• Edge Pulls; Width (Inch): 3-47/64; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 65.0000; Material Grade: 304; Finish/Coating: Black; Material: Stainless Steel; Material: Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Screw Machine Length Drill Bit: 0.413″ Dia, 135 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Jobber Length Drill Bit: 0.302″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: #12-28, UNF, 2 & 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, TICN Finish 0.63″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU459611
• Jobber Length Drill Bit: 0.295″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: 1/4-28, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Hardlube Finish 1.26″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Screw Machine Length Drill Bit: 0.1065″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: 1/4-20, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, Hardlube Finish 1.26″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Compression Spring: 0.411″ OD, 2.5″ Free Length 0.038″ Wire Dia, 6.143 lb Max Load, 3.887 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.11″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 0.411″ OD, 2.75″ Free Length 0.051″ Wire Dia, 13.895 lb Max Load, 10.188 lb/in Spring Rate, Music Wire
• Square End Mill: 5/16'' Dia, 5/8'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 7 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 36 ° Helix, RH Cut, RH Flute, Series VGM7
• Corner Radius End Mill Head: 3 Flutes Solid Carbide
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.06″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2012
• Kyocera CPGB 322S00525MES KBN05M Grade CBN, 11 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (H) Hardened Materials
• Compression Spring: 0.235″ OD, 3.5″ Free Length 0.047″ Wire Dia, 18.21 lb Max Load, 20.857 lb/in Spring Rate, Music Wire
• CPGB090308S01035MET Honeycomb CBN Turning Insert Megacoat Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1252″ Thick, 80° Diamond, Series KBN
• Compression Spring: 0.294″ OD, 3.5″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 2.569 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 50 ° Helix, nACRo Coated, Corner Radius End, Centercutting, Series SM4F
• Compression Spring: 0.294″ OD, 2.25″ Free Length 0.038″ Wire Dia, 8.406 lb Max Load, 7.672 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 3.75″ Free Length 0.045″ Wire Dia, 13.365 lb Max Load, 8.991 lb/in Spring Rate, Music Wire
• Laminators; Laminator Type: Pouch Laminating Machine; Lamination: Cold, Hot; Width (Inch): 21; Maximum Document Width: 12.5 in; Maximum Document Length: 12.5 in; Overall Length: 8.19; Overall Height: 5.06 in
• Jobber Length Drill Bit: 0.272″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.02″ Cutting Width, Series TQS20
• Polyimide Film Tape: 1/2″ Wide, 36 yd Long, 2.5 mil Thick 30 Lb/In Tensile Strength, Silicone Adhesive, -40 to 500 ° F
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.039″ Cutting Width, Series TQS20
• Grooving Insert: TDXTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDXT-E
• Jobber Length Drill Bit: 0.6094″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: TDXTT TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDXT-E
• Grooving Insert: TDXUXU-Universal TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDXU-E
• Compression Spring: 1.469″ OD, 5.25″ Free Length 0.177″ Wire Dia, 96.438 lb Max Load, 48.021 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 1.125″ Free Length 0.049″ Wire Dia, 9.902 lb Max Load, 19.642 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TDXUXU-Universal TT9100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDXU-E
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Compression Spring: 0.47″ OD, 3.5″ Free Length 0.049″ Wire Dia, 10.976 lb Max Load, 5.395 lb/in Spring Rate, Music Wire
• Grooving Insert: TDXUXU-Universal TT8020, Solid Carbide TiCN Finish, Neutral, 0.315″ Cutting Width, Series TDXU-E
• Commercial Hinges; Type: Butt Hinge; Width (Inch): 4; Length (Inch): 4; Minimum Thickness: 3.4000; Number of Knuckles: 5.000; Pin Diameter: 14.800; Finish/Coating: Satin; Box Quantity: 2; Material Grade: 304; Number of Holes: 8.000; Minimum Order Quantity
• Compression Spring: 0.705″ OD, 9″ Free Length 0.135″ Wire Dia, 91.644 lb Max Load, 48.838 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.02″ Cutting Width, Series TQS20
• Drawer Slides; Type: Mini Drawer Slide; Extension Style: Full; Slide Length: 100.00; Travel Length: 125.00; Load Capacity (Lb.): 24.200; Width (Inch): 3/8; Slide Length: 100.00; Material: Stainless Steel; Material Grade: 304; Material: Stainless Steel
• Compression Spring: 1.293″ OD, 3.25″ Free Length 0.225″ Wire Dia, 200.667 lb Max Load, 314.929 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.079″ Cutting Width, Series TQS20
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.098″ Cutting Width, Series TQS20
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.098″ Cutting Width, Series TQS20
• Compression Spring: 2.35″ OD, 9.5″ Free Length 0.225″ Wire Dia, 116.218 lb Max Load, 27.55 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.079″ Cutting Width, Series TQS20
• Compression Spring: 2.703″ OD, 6.75″ Free Length 133.892 lb Max Load, 44.78 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.039″ Cutting Width, Series TQS20
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.700; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.059″ Cutting Width, Series TQS20
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 3.700; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Series
• Grooving Insert: TDXUXU-Universal TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.315″ Cutting Width, Series TDXU-E
• Square End Mill: 1/2'' Dia, 1-1/4'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 1025 & Alumigator
• Grooving Insert: TDXTT TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.315″ Cutting Width, Series TDXT-E
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• 6.25mm, 165° Drill Point, 3.175mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.062″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Grooving Insert: TDXUXU-Universal TT7505, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDXU-E
• 6.2mm, 165° Drill Point, 3.175mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Grooving Insert: TQSS TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.059″ Cutting Width, Series TQS20
• Letter B, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 0.48″ Flute Length, 1-1/2″ OAL, Series 306
• Compression Spring: 0.411″ OD, 1.5″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 10.469 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 1.25″ Free Length 0.049″ Wire Dia, 9.902 lb Max Load, 17.511 lb/in Spring Rate, Stainless Steel
• 6mm, 165° Drill Point, 3.175mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Compression Spring: 0.411″ OD, 0.875″ Free Length 0.055″ Wire Dia, 13.6 lb Max Load, 41.098 lb/in Spring Rate, Stainless Steel
• 6.15mm, 165° Drill Point, 3.175mm Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Latches; Type: Spring Loaded Compression Draw Latch; Length (mm): 42.00; Width (mm): 37.00; Height (mm): 13.0000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 16; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless St
• Compression Spring: 0.294″ OD, 1.5″ Free Length 0.045″ Wire Dia, 10.636 lb Max Load, 20.293 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.3268″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Square End Mill: 1/2'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2032
• Jobber Length Drill Bit: 0.3307″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Chucking Reamer: 0.1418″ Dia, 2.758″ OAL, 0.7092″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Spiral Flute Tap: #2-56, UNC, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H3 & H4, Series 0391
• 1-1/4″ Head Diam, 1/2″ Shank Diam, 3 Flute 90° Cobalt Countersink Bright Finish, 3-1/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Grooving Insert: TDXUXU-Universal TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDXU-E
• Compression Spring: 0.764″ OD, 7.5″ Free Length 0.148″ Wire Dia, 108.365 lb Max Load, 73.216 lb/in Spring Rate, Stainless Steel
• Undercutting End Mills; Mill Diameter (Inch): 1/16; Overall Length (Inch): 1-1/2; Radius: 0.0313; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 0.2188; Shank Diameter (Inch)
• Grooving Insert: TDXUXU-Universal TT7220, Solid Carbide TiCN Finish, Neutral, 0.315″ Cutting Width, Series TDXU-E
• Compression Spring: 0.999″ OD, 8.5″ Free Length 0.135″ Wire Dia, 67.482 lb Max Load, 21.626 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Compression Spring: 1.41″ OD, 5.25″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 52.178 lb/in Spring Rate, Stainless Steel
• Duct Tape: 3″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• White Double-Sided Polyester Film Tape: 2″ Wide, 9.3 mil Thick, Hot Melt Synthetic Rubber Adhesive
• Jobber Length Drill Bit: 0.1417″ Dia, 118 °, Solid Carbide Bright/Uncoated, Series 50830
• Chucking Reamer: 0.377″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, Cobalt 6 Flute
• 1/4″ Diam 4-Flute 35/38° Solid Carbide 0.005″ Corner Chamfer Roughing & Finishing End Mill AlCr Finish, 3/4″ LOC, 2-1/2″ OAL, 1/4″ Shank Diam, Centercutting, Standard Length
• Grooving Insert: GMG3020150R CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Compression Spring: 0.411″ OD, 3″ Free Length 0.035″ Wire Dia, 3.874 lb Max Load, 2.126 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 3.5″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 2.089 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 2.375″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 3.564 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.47″ OD, 4.25″ Free Length 0.047″ Wire Dia, 9.777 lb Max Load, 3.816 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1575″ Dia, 0.1575″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.881″ OD, 1.875″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 12.398 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 1.75″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 13.358 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1181″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.294″ OD, 2.375″ Free Length 0.038″ Wire Dia, 8.406 lb Max Load, 7.255 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0591″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0591″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.35″ OD, 5.5″ Free Length 0.225″ Wire Dia, 116.218 lb Max Load, 48.144 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.2362″ Dia, 0.2362″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.411″ OD, 2.75″ Free Length 0.038″ Wire Dia, 6.143 lb Max Load, 3.523 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0394″ Dia, 0.0394″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.294″ OD, 3.75″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 2.395 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Semi-Bottoming, High Speed Steel-E, TiAlN Finish 2.835″ OAL, Right Hand Flute, Right Hand Thread, H7, Series TC117
• Compression Spring: 0.294″ OD, 4″ Free Length 0.045″ Wire Dia, 13.365 lb Max Load, 8.416 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.4688″ Dia, 118 °, High Speed Steel Bright/Uncoated, 5.75″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• AOMT170508PEER-H Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• Open End Wrench: Single End Head, 1-1/8″ 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• TNMX332-WM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 60° Triangle
• AOMT170504PEER-H Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• AOMT170512PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• CNMG433-SM S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Triangle
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Drawer Slides; Type: Mini Drawer Slide; Extension Style: Full; Slide Length: 150.00; Travel Length: 177.00; Load Capacity (Lb.): 26.400; Width (Inch): 3/8; Slide Length: 150.00; Material: Stainless Steel; Material Grade: 304; Material: Stainless Steel
• AOMT170512PEER-L Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• CNMG431-SM S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Triangle
• Brackets; Type: Angle Bracket; Length (mm): 90.00; Width (mm): 20.00; Height (mm): 90.0000; Load Capacity (Lb.): 37.000; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• WNMG332-WF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Triangle
• AOMT170504PEER-L Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• WNMG331-WF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Trigon
• Drawer Slides; Type: Mini Drawer Slide; Extension Style: Full; Slide Length: 200.00; Travel Length: 149.00; Load Capacity (Lb.): 52.911; Additional Information: Length: 349 mm; Width: 5.2 mm; Height: 15.5 mm; Slide Length: 200.00; Material: Stainless Stee
• AOMT170550PEER-G Carbide Milling Insert Absotech Finish, 5.2mm Thick x 18mm Wide
• WNMG333-WMX 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Triangle
• AOMT170516PEER-H Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• WNMG332-WF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Diamond
• CNMG433-SF S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Diamond
• AOMT170508PEER-L Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• AOMT170540PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• AOMT170502PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• CNMG431-SF S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Triangle
• Turning Insert: CNMG 12 04 04-MF S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• AOMT170550PEER-G Carbide Milling Insert Absotech Finish, 5.2mm Thick x 18mm Wide
• CNMG432-SM S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Triangle
• AOMT170502PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• AOMT170540PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• Screw Machine Length Drill Bit: 0.1417″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• AOMT170504PEER-H Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• AOMT170504PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• Spiral Flute Taps
• AOMT170520PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• AOMT170504PEER-L Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• Chucking Reamer: 0.1475″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• AOMT170510PEER-G Carbide Milling Insert Absotech Finish, 5.5mm Thick x 19.5mm Wide
• Grooving Insert: GMM3020150R CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, Plug, 2BX, HSS-E, Sirius Finish 100 mm OAL, Right Hand, H5/H6, Series 4642
• Compression Spring: 1.586″ OD, 6.75″ Free Length 219.119 lb Max Load, 133.534 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.1405″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.315″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 5/16″ Dia, 1-3/8″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Milling Insert: KDMB0625M0ERGP, KCPK10, Cast Iron & Steel N/A Finish, 0.6250″ OAW
• AOMT170564PEER-G Carbide Milling Insert Absotech Finish, 5.2mm Thick x 18mm Wide
• Combination Wrench: Vanadium Steel, Matte Satin Chrome-Plated
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.19; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.01; Extension
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.19; Load Capacity: 80 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.01; Extension
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.19; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.01; Extension
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.19; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.01; Extension
• Clear Double-Sided Acrylic Tape: 1″ Wide, 4 yd Long, 20 mil Thick, Acrylic Adhesive
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.19; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.01; Extension
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 17.19; Load Capacity: 100 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 11.01; Extension
• Compression Spring: 2.115″ OD, 4.5″ Free Length 0.192″ Wire Dia, 84.754 lb Max Load, 40.177 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Bright/Uncoated 0.9″ Thread Length, 2.9375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 774
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Bright/Uncoated 0.9″ Thread Length, 2.9375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 774
• Compression Spring: 0.411″ OD, 3.25″ Free Length 0.038″ Wire Dia, 4.881 lb Max Load, 2.581 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.375″ Free Length 0.042″ Wire Dia, 6.457 lb Max Load, 5.044 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.294″ OD, 2.875″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 2.731 lb/in Spring Rate, Stainless Steel
• Duct Tape: 6″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Note Pads, Writing Pads & Notebooks; Product Type: Wide Ruled Spiral-Notebook; Paper Color: White; Style of Rule: Wide; Cover Color: Orange; Binding Location: Side
• Masking Tape: 30 mm Wide, 55 m Long, 5.9 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• Spiral Flute Tap: M2.5, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, Vaporisiert Finish Right Hand Flute, Right Hand Thread, Series TC115
• Press Fit Headless Drill Bushing: HM, 8.2″ ID Steel
• Corner Radius End Mill: 0.01″ Dia, 1/64″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headless Drill Bushing: HM, 9.2″ ID Steel
• Corner Radius End Mill: 0.018″ Dia, 0.027″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 7/16'' Dia, 1'' LOC, 7/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Corner Radius End Mill: 1/32″ Dia, 0.47″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Compression Spring: 0.353″ OD, 1.875″ Free Length 0.068″ Wire Dia, 34.727 lb Max Load, 75.411 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 4.5″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 1.617 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 0.411″ OD, 2.5″ Free Length 0.04″ Wire Dia, 5.635 lb Max Load, 4.032 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.125″ Free Length 0.042″ Wire Dia, 6.457 lb Max Load, 5.662 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 2.5″ Free Length 0.042″ Wire Dia, 8.117 lb Max Load, 5.5 lb/in Spring Rate, Music Wire
• Square End Mill: 7/32'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlCrN Finish, 45 ° Helix, Centercutting, RH Cut
• Square End Mill: 0.04'' Dia, 0.12'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.411″ OD, 5.25″ Free Length 0.045″ Wire Dia, 9.831 lb Max Load, 3.29 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 4.75″ Free Length 0.047″ Wire Dia, 11.089 lb Max Load, 4.27 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.875″ Free Length 0.072″ Wire Dia, 35.577 lb Max Load, 65.425 lb/in Spring Rate, Music Wire
• Square End Mill: 0.025'' Dia, 0.037'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Lockset Accessories; Type: Exit Device Pull Trim; For Use With: Reliant Series Commerical Doors; Cylinder Type: None; PSC Code: 5340; Type: Exit Device Pull Trim; For Use With: Reliant Series Commerical Doors
• Compression Spring: 0.881″ OD, 2.25″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 10.199 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.01″ Dia, 0.03″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.07″ Dia, 0.21″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Single End
• Grooving Insert: AA, Solid Carbide TiCN Finish, Right Hand, 4.2 mm Cutting Width, 1.16 mm Max Depth, Series 25670
• Compression Spring: 0.881″ OD, 2.5″ Free Length 0.068″ Wire Dia, 15.02 lb Max Load, 9.12 lb/in Spring Rate, Music Wire
• Grooving Insert: AA, Solid Carbide TiCN Finish, Right Hand, 4.2 mm Cutting Width, 0.58 mm Max Depth, Series 25670
• Square End Mill: 0.025'' Dia, 0.037'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Compression Spring: 0.881″ OD, 1.625″ Free Length 0.072″ Wire Dia, 17.615 lb Max Load, 17.54 lb/in Spring Rate, Music Wire
• Grooving Insert: AA, Solid Carbide TiCN Finish, Left Hand, 4.2 mm Cutting Width, 1.48 mm Max Depth, Series 25671
• Compression Spring: 0.294″ OD, 2.5″ Free Length 0.032″ Wire Dia, 4.137 lb Max Load, 3.151 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: AA, Solid Carbide TiCN Finish, Left Hand, 4.2 mm Cutting Width, 0.86 mm Max Depth, Series 25671
• Grooving Insert: AA, Solid Carbide TiCN Finish, Right Hand, 4.2 mm Cutting Width, 1.48 mm Max Depth, Series 25670
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.294″ OD, 4″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 2.243 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: AA, Solid Carbide TiCN Finish, Right Hand, 4.2 mm Cutting Width, 0.86 mm Max Depth, Series 25670
• Compression Spring: 0.294″ OD, 4.5″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 1.99 lb/in Spring Rate, Music Wire
• Square End Mill: 13mm LOC, 4mm Shank Dia, 57mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6479
• Grooving Insert: AA, Solid Carbide TiCN Finish, Left Hand, 4.2 mm Cutting Width, 1.16 mm Max Depth, Series 25671
• Compression Spring: 0.294″ OD, 4.75″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 1.884 lb/in Spring Rate, Music Wire
• Square End Mill: 16mm LOC, 6mm Shank Dia, 57mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6479
• Grooving Insert: AA, Solid Carbide TiCN Finish, Left Hand, 4.2 mm Cutting Width, 0.58 mm Max Depth, Series 25671
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 0.294″ OD, 4.25″ Free Length 0.045″ Wire Dia, 13.365 lb Max Load, 7.91 lb/in Spring Rate, Music Wire
• Square End Mill: 15mm LOC, 5mm Shank Dia, 57mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6479
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Document Protectors; Document Type: Shop Ticket Holder; Material: Vinyl; Color: White, Green; For Document Width: 9 in; For Document Length: 12 in
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 2 Flute, 0.0063″ Chamfer Width, Solid Carbide 3.66 mm OAL, ZrN Coated, Centercutting
• Milling Insert: AH8015, Solid Carbide N/A Finish,
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 2 Flute, 0.0024″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Screw Machine Length Drill Bit: 0.1875″ Dia, 140 °, Solid Carbide ALtima Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank