Products

• Compression Spring: 0.47″ OD, 1″ Free Length 0.04″ Wire Dia, 6.238 lb Max Load, 9.989 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.875″ Free Length 0.047″ Wire Dia, 11.089 lb Max Load, 11.163 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.25″ Free Length 0.055″ Wire Dia, 17.103 lb Max Load, 31.716 lb/in Spring Rate, Music Wire
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 21.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Square End Mill: 5/64'' Dia, 0.32'' LOC, 2.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.235″ OD, 1.625″ Free Length 0.047″ Wire Dia, 18.21 lb Max Load, 46.401 lb/in Spring Rate, Music Wire
• Boring Bar: 1/16″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Corner Radius End Mill: 0.0984″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.235″ OD, 1.75″ Free Length 0.047″ Wire Dia, 18.21 lb Max Load, 42.899 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0984″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0787″ Dia, 0.0984″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.294″ OD, 1.875″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 4.874 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 0.938″ Free Length 0.04″ Wire Dia, 9.681 lb Max Load, 23.758 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 5/8-18, UNF, 3 Flutes, Plug, 2B/3B, High Speed Steel, AlTiN Finish 1-13/16″ Thread Length, 3-13/16″ OAL, Right Hand, H3, Series 762
• Compression Spring: 0.294″ OD, 0.813″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 33.989 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 2″ Free Length 0.045″ Wire Dia, 13.365 lb Max Load, 17.228 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 1.875″ Free Length 0.045″ Wire Dia, 13.365 lb Max Load, 18.435 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.348″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Spherical/Ball Casters; Mount: Round; Grip Ring; Wheel Type: Solid Rubber; Swivel: Yes; Wheel Material: Neoprene Rubber; Wheel Width: 1; Brake Type: No Brake; Load Capacity: 125.00; Wheel Shape: Donut; Mounting Height: 2.625; Wheel Hardness Rating: 85 Sho
• Compression Spring: 1.937″ OD, 3″ Free Length 0.225″ Wire Dia, 139.378 lb Max Load, 129.948 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.125″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/4″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 0.01'' Dia, 1/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.01'' Dia, 1/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 3/16″ Dia, 9/16″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Hook & Loop; Shape: Square; Tape Width: 1.00 in; Color: Black; Piece Length (Inch): 1; Component Type: Hook & Loop; Number Of Pieces: 100.000
• Combo Drill & Countersink:120 ™, High Speed Steel Coated Finish, 28″ OAL, Right Hand Cut, Series V95
• Combo Drill & Countersink:120 ™, High Speed Steel Coated Finish, 28″ OAL, Right Hand Cut, Series V95
• Compression Spring: 0.411″ OD, 1.375″ Free Length 0.035″ Wire Dia, 4.882 lb Max Load, 5.49 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 0.938″ Free Length 0.04″ Wire Dia, 5.635 lb Max Load, 11.378 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.409″ OD, 6.5″ Free Length 149.309 lb Max Load, 56.862 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.411″ OD, 0.75″ Free Length 0.045″ Wire Dia, 7.823 lb Max Load, 22.366 lb/in Spring Rate, Stainless Steel
• Kyocera SPG 433 TN100M Grade Uncoated Cermet, Square, Positive Rake Angle, Neutral Milling Insert for Finishing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel
• Compression Spring: 0.411″ OD, 2″ Free Length 0.045″ Wire Dia, 9.831 lb Max Load, 8.888 lb/in Spring Rate, Music Wire
• Compression Spring: 0.411″ OD, 1.625″ Free Length 0.049″ Wire Dia, 12.443 lb Max Load, 15.192 lb/in Spring Rate, Music Wire
• Compression Spring: 0.47″ OD, 1.5″ Free Length 0.049″ Wire Dia, 10.976 lb Max Load, 13.092 lb/in Spring Rate, Music Wire
• 9 Piece, 3/16″ Character Steel Stamp Set Figures, Standard
• Compression Spring: 0.294″ OD, 1.75″ Free Length 0.032″ Wire Dia, 5.223 lb Max Load, 5.235 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Compression Spring: 0.294″ OD, 1.5″ Free Length 0.035″ Wire Dia, 6.698 lb Max Load, 8.549 lb/in Spring Rate, Music Wire
• Square End Mill: 9mm LOC, 3mm Shank Dia, 65mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• Spiral Point Tap: #10-32, UNF, 2 Flutes, Plug, High Speed Steel, Bright Finish 7/8″ Thread Length, 2-3/8″ OAL, Right Hand, H11, Series SPGP+5
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 22 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 15mm LOC, 5mm Shank Dia, 65mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• Spiral Flute Tap: 7/16-14, UNC, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 4654
• Square End Mill: 14mm LOC, 4mm Shank Dia, 65mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 16mm LOC, 6mm Shank Dia, 70mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• Ball End Mill: 0.315″ Dia, 0.748″ LOC, 2 Flute, Solid Carbide ZrN Coated
• File Folders, Expansion Folders & Hanging Files; Folder Type: Expanding File; Accordion; Color: Sandy Gray, Sunny Yellow, Sunset Red, Seafoam Green, Seaside Blue; Index Tabs: Yes
• Square End Mill: 0.118'' Dia, 1-3/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GMG3020020MS KW10, Solid Carbide Co & WC Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Chamfer Mill: 0.25″ Dia, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, AlTiN Coated
• Square End Mill: 0.04'' Dia, 0.16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.015″ Dia, 0.022″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GMG3020030MG KW10, Solid Carbide Co & WC Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Square End Mill: 3/32'' Dia, 0.279'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 43 ° Variable Helix, RH Cut, RH Flute
• Square End Mill: 1/32'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Square End Mill: 1/16'' Dia, 0.186'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 42 ° Variable Helix, RH Cut, RH Flute
• Portfolios, Report Covers & Pocket Binders; Color: Red, White, Yellow, Blue, Purple, Black, Green; Overall Width: 8.5 in; Overall Length: 11 in; Material: Paper
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• CNMM 642-QR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/4″ Inscribed Circle, 0.0313″ Corner Radius, 1/4″ Thick, 80° Trigon
• Swivel Top Plate Caster: Polypropylene, 4″ Wheel Dia, 1-1/4″ Wheel Width, 247 lb Capacity, 5″ OAH 2.5″ Plate Length, 3.69″ Plate Width, No Brake
• Turning Insert: SNMM 19 06 16-HR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series SNMM-HR
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Screw Machine Length Drill Bit: 0.3563″ Dia, 120 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1100
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 1/8″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Turning Insert: SNMM 19 06 16-HR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series SNMM-HR
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.09″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Compression Spring: 0.411″ OD, 0.875″ Free Length 0.04″ Wire Dia, 5.635 lb Max Load, 12.273 lb/in Spring Rate, Stainless Steel
• Turning Insert: SNMM 19 06 24-HR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Series SNMM-HR
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 0.235″ OD, 0.625″ Free Length 0.047″ Wire Dia, 14.493 lb Max Load, 116.335 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, Plug, High Speed Steel, Uncoated 1-1/4″ Thread Length, 2-15/16″ OAL, Right Hand, H11, Series 764
• Compression Spring: 0.294″ OD, 0.938″ Free Length 0.038″ Wire Dia, 6.679 lb Max Load, 16.835 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Polytetrafluroethylene Film Tape: 1/2″ Wide, 36 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Turning Insert: CNMM 19 06 16-HR 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.294″ OD, 0.75″ Free Length 0.042″ Wire Dia, 8.804 lb Max Load, 32.329 lb/in Spring Rate, Stainless Steel
• Turning Insert: CNMM 19 06 24-HR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• Corner Radius End Mill: 0.031″ Dia, 0.045″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.294″ OD, 0.813″ Free Length 0.042″ Wire Dia, 8.804 lb Max Load, 29.556 lb/in Spring Rate, Stainless Steel
• Turning Insert: CNMM 19 06 16-HR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Spiral Flute Tap: M10 x 1.25, Metric, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D5, Series 347
• Turning Insert: CNMM 19 06 24-HR 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0938″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D6, Series 347
• Square End Mill: 5/16'' Dia, 13/16'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6484
• CNMM644-QR 4425 Carbide Turning Insert TiCN+Al2O3+TiN Finish, Neutral, 19.05mm Inscribed Circle, 1.59mm Corner Radius, 6.35mm Thick, 80° Diamond, Series T-Max P
• 3/4″ Head Diam, 1/2″ Shank Diam, 6 Flute 82° High Speed Steel Countersink 2-3/4″ OAL
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• SNMM646-PR 4425 Carbide Turning Insert TiCN+Al2O3+TiN Finish, Neutral, 19.05mm Inscribed Circle, 2.38mm Corner Radius, 6.35mm Thick, Square, Series T-Max P
• Square End Mill: 3/16'' Dia, 0.57'' LOC, 3/16'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute
• CNMM643-QR 4415 Carbide Turning Insert TiCN+Al2O3+TiN Finish, Neutral, 19.05mm Inscribed Circle, 1.19mm Corner Radius, 6.35mm Thick, 80° Diamond, Series T-Max P
• Small Parts Boxes & Organizers; Product Type: Compartment Box; Width (Inch): 18; Depth (Inch): 12; Height (Inch): 3; Color: Blue; Additional Information: Compartments are Adjustable; Material: Steel; Height (Decimal Inch): 3.0000; Depth (Decimal Inch): 12
• Chucking Reamer: 0.1055″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute, RH
• Spiral Flute Tap: MJ8 x 1.25, MJ, 3 Flute, Modified Bottoming, 4H Class of Fit, HSS-E-PM, ACN Finish Right Hand Flute, Right Hand Thread, Series MTH
• Compression Spring: 0.294″ OD, 1.625″ Free Length 0.042″ Wire Dia, 11.068 lb Max Load, 16.068 lb/in Spring Rate, Music Wire
• 120° 3/16″ Diam 2″ OAL 2-Flute Solid Carbide Spotting Drill 5/8″ Flute Length, 3/16″ Shank Diam
• Chucking Reamer: 0.1005″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute, RH
• Chucking Reamer: 0.1135″ Dia, 3-1/2″ OAL, 7/8″ Flute Length, Straight Shank, High Speed Steel 4 Flute, RH
• Square End Mill: 19mm LOC, 8mm Shank Dia, 70mm OAL, 4 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8205
• Back Chamfers; Cutter Head Diameter (Decimal Inch): 0.1250 in; Included Angle: 90.00; Number of Flutes: 5; Chamfer Width (Decimal Inch): 0.0220 in; Chamfer Width: 0.0220 in; Back Chamfer Material: Solid Carbide; Overall Length (Inch): 1.50; Coated: Uncoat
• Combination Nipples For Hoses; Type: King Nipple; Material: Plated Steel; Thread Standard: Male NPT; Thread Size: 1-1/4 in; Overall Length: 4.06 in; Epa Watersense Certified: No
• Compression Spring: 1.939″ OD, 9″ Free Length 0.192″ Wire Dia, 92.038 lb Max Load, 22.666 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.1476″ Dia, 130 °, High Speed Steel Nitrided Land Finish, 2.7559″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Milling Insert: KDMB06M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.2360″ OAW
• Grooving Insert: GE150010A TN6020, Cermet TiCN Finish, Right Hand, 1.5 mm Cutting Width, 1.5 mm Max Depth, Series SIGE
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 1.998″ OD, 6.5″ Free Length 0.162″ Wire Dia, 76.872 lb Max Load, 18.84 lb/in Spring Rate, Music Wire
• Milling Insert: KDMB06M0ERGP, KCPK10, Cast Iron & Steel N/A Finish, 0.2360″ OAW
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Spiral Point Tap: 1/4-20, UNC, 3 Flutes, Plug, 2B, Powdered Metal High Speed Steel, Uncoated 15 mm Thread Length, 80 mm OAL, Right Hand, Series CoroTap 200
• Milling Insert: KDMB08M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.3150″ OAW
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 7.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Deci
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 1.469″ OD, 3.25″ Free Length 0.207″ Wire Dia, 201.95 lb Max Load, 179.622 lb/in Spring Rate, Music Wire
• Jobber Length Drill Bit: 0.1272″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Document Protectors; Document Type: Document Sleeve; Material: Polypropylene; Color: Clear; For Document Width: 8.5; For Document Length: 12 in
• Turning Insert: 2QP-CNGA433-LC BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Combo Drill & Countersink: #4-1/2, 3/8″ Body Dia, 118 ™, High Speed Steel TiN Finish, 9/64″ Point Dia, 2-1/2″ OAL, Right Hand Cut
• Turning Insert: 2QP-DNGA431-L BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 0.0472″ Dia, 0.0709″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: 2QP-DNGA431-LC BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Note Pads, Writing Pads & Notebooks; Product Type: Wide Ruled Spiral-Notebook; Paper Color: White; Style of Rule: Wide; Cover Color: Green; Binding Location: Side
• Turning Insert: DNMG150608-UC YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.5510″ Long, 1/2″ Inscribed Circle, N/A Series DNMG
• Clear Double-Sided Polyester Film Tape: 1/2″ Wide, 3 yd Long, 8.3 mil Thick, Acrylic Adhesive
• Compression Spring: 0.999″ OD, 7″ Free Length 0.148″ Wire Dia, 114.443 lb Max Load, 44.789 lb/in Spring Rate, Music Wire
• Turning Insert: DNMG150408-UG YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.5510″ Long, 1/2″ Inscribed Circle, N/A Series DNMG
• Square End Mill: 0.0591'' Dia, 0.0866'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: DNMG150608-UF YG3020, Solid Carbide TiCN & Al2O3 Finish, 0.5510″ Long, 1/2″ Inscribed Circle, N/A Series DNMG
• All-Purpose & Utility Hooks; Overall Length (Inch): 2-1/2; Finish/Coating: Dull Chrome; Maximum Load Capacity: 44.00; Width (Inch): 2-1/2; Minimum Order Quantity: Zinc Alloy; Type: Square Retractable Recessed Hook; Material: Zinc Alloy; Type: Square Retra
• All-Purpose & Utility Hooks; Overall Length (Inch): 2-1/2; Finish/Coating: Matte Black; Maximum Load Capacity: 44.00; Width (Inch): 2-1/2; Minimum Order Quantity: Zinc Alloy; Type: Square Retractable Recessed Hook; Material: Zinc Alloy; Type: Square Retra
• Boring Bar: 0.196″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Turning Insert: DNMG150404-UF YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.5510″ Long, 1/2″ Inscribed Circle, N/A Series DNMG
• Compression Spring: 0.411″ OD, 1.375″ Free Length 0.038″ Wire Dia, 6.143 lb Max Load, 7.253 lb/in Spring Rate, Music Wire
• Turning Insert: 2QP-CNGA431 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Compression Spring: 0.411″ OD, 2.25″ Free Length 0.045″ Wire Dia, 9.831 lb Max Load, 7.859 lb/in Spring Rate, Music Wire
• Boring Bar: 0.216″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Compression Spring: 0.411″ OD, 1.625″ Free Length 0.051″ Wire Dia, 13.895 lb Max Load, 17.714 lb/in Spring Rate, Music Wire
• Compression Spring: 0.235″ OD, 2.125″ Free Length 0.047″ Wire Dia, 18.21 lb Max Load, 34.978 lb/in Spring Rate, Music Wire
• Boring Bar: 0.216″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Grooving Insert: GV125A KW10, Solid Carbide Co & WC Finish, Right Hand, 1.25 mm Cutting Width, 2.3 mm Max Depth, Series GVIG
• Compression Spring: 0.294″ OD, 1.625″ Free Length 0.035″ Wire Dia, 6.698 lb Max Load, 7.862 lb/in Spring Rate, Music Wire
• Grooving Insert: GVF340A KW10, Solid Carbide Co & WC Finish, Right Hand, 3.4 mm Cutting Width, 2.3 mm Max Depth, Series GFV
• Compression Spring: 0.294″ OD, 1.125″ Free Length 0.04″ Wire Dia, 9.681 lb Max Load, 19.495 lb/in Spring Rate, Music Wire
• Clear Double-Sided Acrylic Tape: 6″ Wide, 36 yd Long, 20 mil Thick, Acrylic Adhesive
• Combination Wrench: Vanadium Steel, Matte Satin Chrome-Plated
• Square End Mill:
• Boring Bar: 0.2″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.18″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.18″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Jobber Length Drill Bit: 0.3228″ Dia, 118 °, Cobalt Oxide Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 305
• Turning Insert: DNMG150408-UR YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.5510″ Long, 1/2″ Inscribed Circle, N/A Series DNMG
• Spiral Flute Tap: #3-56, UNF, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, TICN Finish Right Hand Flute, Right Hand Thread, H2, Series BU459611
• Turning Insert: DNMG150412-UR YG3010, Solid Carbide TiCN & Al2O3 Finish, 0.5510″ Long, 1/2″ Inscribed Circle, N/A Series DNMG
• Spiral Point Tap: M12 x 1.75, Metric, 4 Flutes, Plug, 6HX, Sirius Finish 24 mm Thread Length, 110 mm OAL, Right Hand, D8/D9, Series 4218
• ID Badges; Type: Pressure Sensitive Adhesive Label; Legend: Visitor; Color: Blue; Material: Paper
• Extra Length Drill Bit: 0.1181", 140 &deg, Carbide
• Press Fit Headless Drill Bushing: P, 9/16″ ID, 3/4″ OD 1/2″ OAL, Carbon Steel
• O-Ring: 2″ ID x 2.63″ OD, 1/4″ Thick, Nitrile Butadiene Rubber Round Cross Section, Black
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Square End Mill: 0.04'' Dia, 13/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.015″ Dia, 0.022″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.233″ OD, 4″ Free Length 0.192″ Wire Dia, 110.918 lb Max Load, 48.287 lb/in Spring Rate, Music Wire
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated
• Press Fit Headed Drill Bushing: Type H, 5/8″ ID, 7/8″ OD
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• 5mm x 25' Buna-N Round Cord Stock 250°F Max, Shore 90A, 2,000 psi Tensile Strength, Black
• Note Pads, Writing Pads & Notebooks; Product Type: Wide Ruled Spiral-Notebook; Paper Color: White; Style of Rule: Wide; Cover Color: Yellow; Binding Location: Side
• Press Fit Headless Drill Bushing: P, 13/32″ ID, 5/8″ OD 1-1/2″ OAL, Carbon Steel
• Compression Spring: 1.88″ OD, 6.75″ Free Length 0.192″ Wire Dia, 130.609 lb Max Load, 37.519 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/8″ Dia, 7/8″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 3/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Ball End Mill: 0.03″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Point Tap: #0-80, UNF, 2 Flutes, Plug, 3B, HSS-E, GLT-1 Finish 1.626″ OAL, Right Hand, H1, Series BU20C310
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 3/4; Length (yd): 5.00; Thickness (mil): 10.0000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 500.000; Color: Clear; Liner Material: Kraft Paper; Series:
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.015″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Square End Mill: 0.0079'' Dia, 1/16'' LOC, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.125″ Dia, 130 °, Solid Carbide TiB2 Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.0591″ Dia, 0.0866″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.375″ Dia, 1.5″ LOC, 3 Flute, Solid Carbide 6″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Screw Machine Length Drill Bit: 0.339″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Hydraulic Tool Chuck: BT40 Taper Shank, 18.00 mm Hole
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Document Protectors; Document Type: Document Holder; Material: Vinyl; Color: Clear; For Document Width: 9 in; For Document Length: 12 in
• Boring Bar: 0.32″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL, 0.005″ Corner Radius
• Square End Mill: 0.039'' Dia, 31/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: BSP, 3 Flute, Semi-Bottoming, X Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, Series 0395
• Spiral Flute Tap: M3.50 x 0.60, Metric, 3 Flute, Semi-Bottoming, 6H + 0.1 Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D11 & D12, Series 4627
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 15.60; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 9.6; Extension Force: 90
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 15.60; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 9.6; Extension Force: 60
• Milling Insert: KDMB0500M0ERGC, KCPH15, N/A Finish, 0.5000″ OAW
• Turning Insert: TNMU 16 04 12-WM 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMU-WM
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 15.60; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 9.6; Extension Force: 30
• ID Badges; Type: Pressure Sensitive Adhesive Label; Legend: None; Color: Blue; Material: Paper
• Milling Insert: KDMB0500M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.5000″ OAW
• Turning Insert: TNMU 16 04 12-WM 4425, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series TNMU-WM
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 15.60; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 9.6; Extension Force: 20
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: KDMB10M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.3937″ OAW
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 15.60; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 9.6; Extension Force: 1
• Milling Insert: KDMB12M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.4724″ OAW
• Spiral Flute Tap: M1.60 x 0.35, M, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D3, Series B0503000
• Corner Radius End Mill: 1/16″ Dia, 0.188″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: KDMS1210ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.4724″ OAW
• DNGG431EEG-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.6102″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55° Included Angle, Series AC5000S
• Milling Insert: KDMT05002ERGC, KCPH15, N/A Finish, 0.5000″ OAW
• Milling Insert: KDMT05002ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.5000″ OAW
• DNGG431EEG-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.6102″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55° Included Angle, Series AC5000S
• Internal Boring Bar: 0.1575″ Min Bore, 0.8661″ Max Depth, Right Hand Cut, Carbide 1.5748″ OAL, 0.0039″ Corner Radius
• Milling Insert: KDMT05004ERGC, KCPH15, N/A Finish, 0.5000″ OAW
• Milling Insert: KDMT1210ERGC, KCPH15, N/A Finish, 0.4724″ OAW
• Milling Insert: KDMT05004ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.5000″ OAW
• Corner Radius End Mill: 1/16″ Dia, 0.188″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: KDMT1210ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.4724″ OAW
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: KDMT1220ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.4724″ OAW
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 18.21; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Threaded End; Compressed Length: 11.21; Extens
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 18.21; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Threaded End; Compressed Length: 11.21; Extens
• Compression Spring: 0.999″ OD, 6″ Free Length 0.162″ Wire Dia, 146.271 lb Max Load, 78.508 lb/in Spring Rate, Music Wire
• Spiral Point Tap: #10-32, UNF, 2 Flutes, Plug, High Speed Steel, Black Oxide Finish 7/8″ Thread Length, 2-3/8″ OAL, Right Hand, H11, Series SPGP+5
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 18.21; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Threaded End; Compressed Length: 11.21; Exten
• Compression Spring: 0.999″ OD, 6″ Free Length 0.092″ Wire Dia, 24.145 lb Max Load, 7.333 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: 1/2-20, UNF, 4 Flutes, Plug, 2BX, HSS-E, Sirius Finish 100 mm OAL, Right Hand, H6/H7, Series 4643
• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Left Hand Flute, Left Hand Thread, D4 & D5, Series 4629
• Corner Radius End Mill: 0.0938″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Solid Pilot Counterbores; Fastener Type Compatibility: Cap Screw; Counterbore Diameter (Decimal Inch): 0.7710; Fastener Size Compatibility (Inch): 1/2; Counterbore Material: High Speed Steel; Finish/Coating: Uncoated; Standard or Oversize Pilot: Oversize;
• Chucking Reamer: 3/16″ Dia, 4″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Corner Radius End Mill: 3/16″ Dia, 15/64″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Ball End Mill: 0.0937″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Slitting & Slotting Saw: 1″ Dia, 1/64″ Thick, 3/8″ Arbor Hole, 12 Teeth, Solid Carbide Bright/Uncoated
• Slitting & Slotting Saw: 1″ Dia, 0.01″ Thick, 3/8″ Arbor Hole, 12 Teeth, Solid Carbide Bright/Uncoated
• Dovetail Cutter: 4 °, 1/4″ Cut Dia, 3/8″ Cut Width, Solid Carbide 1/4″ Shank Dia, 1.25″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Slitting & Slotting Saw: 1″ Dia, 1/32″ Thick, 3/8″ Arbor Hole, 12 Teeth, Solid Carbide Bright/Uncoated
• Turning Insert: EPGT521L-W08 TH10, Solid Carbide Uncoated Finish, Left Hand, 0.0160″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Label Holders; Label Holder Style: Slide-in; Length (Inch): 4 in; Material: PVC