Products

• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Modified Bottoming, H11 Class of Fit, Cobalt, GLT-1 Finish 3.15″ OAL, Right Hand Flute, Right Hand Thread, H11, Series BU50C344
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.669″ Thread Length, 3.15″ OAL, Right Hand Flute, Right Hand Thread, H5, Series BU50C300
• Compression Spring: 0.94″ OD, 3.75″ Free Length 0.092″ Wire Dia, 25.581 lb Max Load, 13.18 lb/in Spring Rate, Stainless Steel
• SNMA435-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0787″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC4000K
• Compression Spring: 1.293″ OD, 2.25″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 377.378 lb/in Spring Rate, Music Wire
• Polyester Film Tape: 1″ Wide, 72 yd Long, 3.2 mil Thick 57 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Compression Spring: 1.351″ OD, 4″ Free Length 0.192″ Wire Dia, 128.683 lb Max Load, 108.112 lb/in Spring Rate, Stainless Steel
• Turning Insert: VCGW2205TN012DA5, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 1.469″ OD, 2.5″ Free Length 0.192″ Wire Dia, 164.335 lb Max Load, 176.487 lb/in Spring Rate, Music Wire
• Turning Insert: VCGW332TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW332FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 1.528″ OD, 6.5″ Free Length 0.135″ Wire Dia, 59.818 lb Max Load, 15.124 lb/in Spring Rate, Music Wire
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9463; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.528″ OD, 2.5″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 162.452 lb/in Spring Rate, Music Wire
• Turning Insert: VCGW331FN_A5 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Square End Mill: 5/16'' Dia, 5/8'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5
• Turning Insert: VCGW332FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 1.645″ OD, 6.75″ Free Length 0.135″ Wire Dia, 55.744 lb Max Load, 13.01 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.20 mm Dia, 0.20 mm LOC, 2 Flute, Solid Carbide
• Turning Insert: VCGW332TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Jobber Length Drill Bit: 0.113″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Turning Insert: VCGW332TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Ball End Mill: 0.063″ Dia, 0.189″ LOC, 2 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Jobber Length Drill Bit: 0.098″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Turning Insert: VCGW2205TN012EA5, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Ball End Mill: 0.0709″ Dia, 0.2087″ LOC, 2 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Jobber Length Drill Bit: 0.0819″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Turning Insert: VCGW332FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Ball End Mill: 0.1181″ Dia, 0.3543″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: VCGW331FN_A5 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 2.291″ OD, 5″ Free Length 0.225″ Wire Dia, 119.052 lb Max Load, 55.79 lb/in Spring Rate, Stainless Steel
• Turning Insert: VCGW331FN_A3 CTBH21U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Black Double-Sided Polyethylene Foam Tape: 1″ Wide, 5 yd Long, 62 mil Thick, Rubber Adhesive
• Chamfer Mill: 3 mm Dia, 4 Flutes, Solid Carbide 38 mm OAL, Bright/Uncoated
• Chucking Reamer: 0.309″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Chucking Reamer: 0.295″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Square End Mill: 1/32'' Dia, 0.046'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GDM6020GL PR1215, Solid Carbide Megacoat, Neutral, 6 mm Cutting Width, 30 mm Max Depth, Series KGD
• Grooving Insert: GDM6020GL PR1225, Solid Carbide Megacoat, Neutral, 6 mm Cutting Width, 30 mm Max Depth, Series KGD
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, Plug, HSSE Finish 0.752″ Thread Length, 3.93″ OAL, Right Hand, H5, Series 306
• Manual Tip Cap for Syringes Use with Syringes
• Compression Spring: 1.116″ OD, 9.5″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 32.282 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: 3/8-24, UNF, 3 Flutes, Plug, HSSE Finish 0.752″ Thread Length, 3.54″ OAL, Right Hand, H4, Series 306
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Point Tap: 3/8-16, UNC, 3 Flutes, Plug, HSSE Finish 0.752″ Thread Length, 3.93″ OAL, Right Hand, H3, Series 306
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9681; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 0.0787″ Dia, 0.2362″ LOC, 2 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Screw Machine Length Drill Bit: 0.2402″ Dia, 150 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series A1166
• Screw Machine Length Drill Bit: 0.252″ Dia, 150 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series A1166
• Spiral Point Tap: 3/8-24, UNF, 3 Flutes, Plug, HSSE Finish 0.752″ Thread Length, 3.54″ OAL, Right Hand, H3, Series 306
• Turning Insert: CCET32.51R-GF TT9020, Solid Carbide TiCN Finish, Right Hand, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCET
• Turning Insert: CCET32.50.5R-GF TT9020, Solid Carbide TiCN Finish, Right Hand, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCET
• GN352-60-20-M10-S-70 RUBBER BUMPER
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, ZrN Finish 1.25″ Thread Length, 2.9375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 891
• Turning Insert: CCET32.50R-GF TT9020, Solid Carbide TiCN Finish, Right Hand, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0040″ Corner Radius, 80.0 &deg N/A Diamond, Series CCET
• 6' High, Type IAA Rating, Fiberglass Extension Ladder
• Turning Insert: VCMT332PSF AH725, Solid Carbide TiAlN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VCMT
• Square End Mill: 1/32'' Dia, 7/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Turning Insert: DCMT21.50.5TM T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Turning Insert: CCET32.52L-GF TT9020, Solid Carbide TiCN Finish, Left Hand, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCET
• Chucking Reamer: 0.0345″ Dia, 2″ OAL, 1/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Jobber Length Drill Bit: 0.5118″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Turning Insert: TPMR 11 03 04 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMR
• Chucking Reamer: 0.022″ Dia, 1-1/2″ OAL, 11/64″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Boring Bar: 3 mm Min Bore, 13 mm Max Depth, Right Hand Cut, Solid Carbide 4 mm Shank Dia, 50 mm OAL
• Turning Insert: TPMR 11 03 08-53 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMR-53
• Chucking Reamer: 0.0435″ Dia, 2″ OAL, 5/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Turning Insert: TPMR 11 03 04-53 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMR-53
• Chucking Reamer: 0.0445″ Dia, 2″ OAL, 5/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Spiral Flute Tap: 3/8-24, UNF, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 4657
• Turning Insert: TPMR 11 03 08 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMR
• Chucking Reamer: 0.0455″ Dia, 2″ OAL, 5/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Ball End Mill: 0.1562″ Dia, 0.281″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Packaging Tape: 1-1/2″ Wide, 60 yd Long, 7.2 mil Thick, Brown Kraft Paper, Natural Synthetic Rubber Adhesive, 40 lb/in Tensile Strength
• Ball End Mill: 0.1562″ Dia, 0.562″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• ADMA150308 IC20 Carbide Milling Insert Uncoated, 0.6142″ Long x 0.1252″ Thick x 0.3752″ Wide
• Spiral Point Tap: BSP, 3 Flutes, 3 to 5, HSS-E, Steam Oxide Finish 90 mm OAL, Right Hand, Series 5731
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 38 & 41 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• White Double-Sided Polyethylene Foam Tape: 6″ Wide, 5 yd Long, 31 mil Thick, Rubber Adhesive
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 38 & 41 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: 2QP-VCMW331 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VCMW
• 60° 1/4″ Diam 2-1/2″ OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 3/4″ Flute Length, 1/4″ Shank Diam
• Turning Insert: 2QP-VBMW222 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Turning Insert: 2QP-VCMW331 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VCMW
• O-Ring: 2″ ID x 2-1/8″ OD, 1/16″ Thick, Dash 033, HNBR Round Cross Section
• Screw Machine Length Drill Bit: 0.4291″ Dia, 135 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series A022
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Turning Insert: 2QP-VCMW331 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VCMW
• O-Ring: 2″ ID x 2-1/4″ OD, 1/8″ Thick, Dash 226, HNBR Round Cross Section
• Turning Insert: 2QP-VBMW221 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• O-Ring: 2-3/4″ ID x 3-1/8″ OD, 3/16″ Thick, Dash 335, HNBR Round Cross Section
• Turning Insert: 2QP-VBMW221 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Chucking Reamer: 0.2953″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Turning Insert: 2QP-VBMW222 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Turning Insert: 2QP-VBMW222 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Turning Insert: 2QP-VBMW332 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Turning Insert: 2QP-VBMW332 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Spiral Point Tap: M6 x 1, Metric, 3 Flutes, Plug, 6H, High Speed Steel, Uncoated 15 mm Thread Length, 80 mm OAL, Right Hand, Series CoroTap 200
• Turning Insert: 2QP-VBMW331 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Turning Insert: 2QP-VBMW331 BX310, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Compression Spring: 1.351″ OD, 6.5″ Free Length 0.25″ Wire Dia, 251.765 lb Max Load, 214.231 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: M6 x 1, Metric, 3 Flutes, Plug, 6H, Powdered Metal High Speed Steel, Uncoated 15 mm Thread Length, 80 mm OAL, Right Hand, Series CoroTap 200
• Turning Insert: 2QP-VBMW222 BX310, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Turning Insert: 2QP-VCGW333-LT BX815, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0470″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• 48″ Wide, 1-1/8″ High, Open Shelving Zinc Wire Shelf 18″ Deep
• Catches; Type: Ultra Thin Magnetic Catch; Length (mm): 35.00; Height (mm): 2.8000; Width (mm): 12.00; Finish/Coating: Plain; Strike Length: 35.00; Strike Width: 15.00; Magnetic Force: 3.3; Minimum Order Quantity: Stainless Steel; Material: Stainless Steel
• Turning Insert: 2QP-VCGW333-E BX815, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0470″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 0.294″ OD, 1.125″ Free Length 0.03″ Wire Dia, 3.451 lb Max Load, 5.742 lb/in Spring Rate, Stainless Steel
• Damping Stays; Type: Lid Stay; Capacity: 88.000; 40; Overall Length (mm): 292.0000; Thickness (mm): 2; Width (mm): 52.00; Side: Left Hand; Maximum Opening: 90.000; Finish/Coating: Polished; Mounting Hole Size Diameter: 4.500; Material: 304 Stainless Steel
• Damping Stays; Type: Lid Stay; Capacity: 88.000; 40; Overall Length (mm): 292.0000; Thickness (mm): 2; Width (mm): 52.00; Side: Right Hand; Maximum Opening: 90.000; Finish/Coating: Polished; Mounting Hole Size Diameter: 4.500; Material: 304 Stainless Stee
• Chucking Reamer: 0.1909″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Ball End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 35 & 38 ° Helix, ALtima Blaze Coated, Single End, Series 279
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• SNMG544EGZ-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 5/8″ Long, 5/8″ Inscribed Circle, 0.063″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC4000K
• All-Purpose & Utility Hooks; Overall Length (Inch): 2-1/2; Finish/Coating: Chrome; Maximum Load Capacity: 44.00; Width (Inch): 2-1/2; Minimum Order Quantity: Zinc Alloy; Type: Square Retractable Recessed Hook; Material: Zinc Alloy; Type: Square Retractabl
• SNMG543EGZ-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 5/8″ Long, 5/8″ Inscribed Circle, 0.0472″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC4000K
• SNMG542EGU AC8025P Carbide Turning Insert Absotech Finish, 5/8″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• SNMG542EME AC8025P Carbide Turning Insert Absotech Finish, 5/8″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• SNMG542EMU AC8025P Carbide Turning Insert Absotech Finish, 5/8″ Long, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• SNMG542EMU AC8015P Carbide Turning Insert Absotech Finish, 5/8″ Long, 5/8″ Inscribed Circle, 0.0315″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Milling Insert: WSM35S, Solid Carbide N/A Finish,
• Milling Inserts; Insert Style: APMT; Insert Size: 160408; Insert Material: Solid Carbide; Manufacturer Grade: YG50; Thickness (Inch): 3/16; Corner Radius (Inch): 1/32; Length Range (Decimal Inch): 0.5000 to 0.6000; Series: APMT; Cutting Direction: Right H
• SNMG544EEG AC8025P Carbide Turning Insert Absotech Finish, 5/8″ Long, 1/2″ Inscribed Circle, 0.063″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Spiral Flute Tap: #5-40, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.433″ Thread Length, 2.205″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C300
• Square End Mill: 3/16'' Dia, 1-7/8'' LOC, 3/16'' Shank Dia, 4'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, 50 ° Variable Helix, RH Cut, RH Flute
• SNMG542EEM AC8015P Carbide Turning Insert Absotech Finish, 5/8″ Long, 5/8″ Inscribed Circle, 0.0315″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Spiral Flute Tap: #5-40, UNC, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 2.205″ OAL, Right Hand Flute, Right Hand Thread, H2, Series BU50C310
• Corner Radius End Mill: 0.015″ Dia, 5/64″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• SNMG543EEG AC8025P Carbide Turning Insert Absotech Finish, 5/8″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Grooving Insert: DX18CF5 WSM23S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CF5
• Ball End Mill: 0.4375″ Dia, 3 Flute, Solid Carbide 2-3/4″ OAL, 7/16″ Shank Dia, 37 ° Helix, ZrN Coated, Single End, Series 2045
• Corner Radius End Mill: 5/16″ Dia, 3/4″ LOC, 0.015 to 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1969″ Dia, 0.2362″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CF5
• Turning Insert: TNMG666-RP5 WPP30G, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1.2990″ Long, 3/4″ Inscribed Circle, 0.0940″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-CF5
• White Double-Sided Urethane Foam Tape: 1-1/2″ Wide, 5 yd Long, 125 mil Thick, Acrylic Adhesive
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CF5
• Turning Insert: TNMG330924-RP5 WPP20G, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1.2990″ Long, 3/4″ Inscribed Circle, 0.0940″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Ball End Mill: 0.047″ Dia, 0.07″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Grooving Insert: DX18CF5 WSM23S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CF5
• Compression Spring: 0.294″ OD, 0.813″ Free Length 0.029″ Wire Dia, 3.136 lb Max Load, 7.209 lb/in Spring Rate, Stainless Steel
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.059″ Cutting Width, Series DX-E-L-CF5
• Compression Spring: 0.294″ OD, 1.375″ Free Length 0.029″ Wire Dia, 3.136 lb Max Load, 4.13 lb/in Spring Rate, Stainless Steel
• Square End Mill: 9/64'' Dia, 7/32'' LOC, 3/16'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.294″ OD, 2.625″ Free Length 0.029″ Wire Dia, 3.97 lb Max Load, 2.437 lb/in Spring Rate, Music Wire
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series DX-E-L-CF5
• Compression Spring: 0.294″ OD, 0.75″ Free Length 0.03″ Wire Dia, 3.451 lb Max Load, 8.863 lb/in Spring Rate, Stainless Steel
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.118″ Cutting Width, Series DX-E-L-CF5
• Square End Mill: 0.07'' Dia, 0.57'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• 90° 2-1/2″ OAL Solid Carbide Spotting Drill Bright/Uncoated, 3/4″ Flute Length, RH Cut
• Compression Spring: 0.294″ OD, 1.25″ Free Length 0.03″ Wire Dia, 4.364 lb Max Load, 5.91 lb/in Spring Rate, Music Wire
• Square End Mill: 5/64'' Dia, 0.65'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0791MC
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Left Hand, 0.059″ Cutting Width, Series DX-E-L-CF6
• Compression Spring: 0.294″ OD, 1.25″ Free Length 0.03″ Wire Dia, 3.451 lb Max Load, 5.139 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 3/32'' Dia, 3/4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• O-Ring: 3″ ID x 3.72″ OD, 1/4″ Thick, Silicone Round Cross Section
• Epoxy & Structural Adhesives
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CF6
• Clear Double-Sided Acrylic Tape: 1″ Wide, 5 yd Long, 20 mil Thick, Acrylic Adhesive
• Square End Mill: 3/8'' Dia, 7/8'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Right Hand, 0.059″ Cutting Width, Series DX-E-R-CF5
• Polyester Film Tape: 1″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• 2-1/2″ OAL, 3/8″ Head Diam, 3 Flute, 100° Incl Angle, Integral Pilot, Adjustable Stop Countersink 1/4-28 Straight Threaded Shank, 1-3/4″ Shank Len, 3/16″ Shank Diam, 1/4″ Pilot Diam, High Speed Steel
• Chucking Reamer: 0.1889″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Right Hand, 0.118″ Cutting Width, Series DX-E-R-CF5
• Jobber Length Drill Bit: 0.1695″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.063″ Dia, 0.0945″ LOC, 2 Flute, Solid Carbide 38 mm OAL, 3 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Right Hand, 0.059″ Cutting Width, Series DX-E-R-CF6
• Turning Insert: DNMG433SM AH630, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Square End Mill: 0.07'' Dia, 0.21'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: DX18CF6 WSM33S, Solid Carbide Al Finish, Right Hand, 0.079″ Cutting Width, Series DX-E-R-CF6
• Boring Bar: 0.15″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Grooving Insert: GMM3020040MW PR930, Solid Carbide TiCN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Grooving Insert: GMM3020020MS PR930, Solid Carbide TiCN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Spiral Flute Tap: #6-32, UNC, 2 Flute, Semi-Bottoming, 2B & 3B Class of Fit, High Speed Steel, ZrN Finish 0.6875″ Thread Length, 2″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 891
• Square End Mill: 0.1'' Dia, 51/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 12.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Dec
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 17.00; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9; Ext
• Boring Bar: 0.29″ Min Bore, 1-1/2″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 3″ OAL, 0.005″ Corner Radius
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 17.00; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9; Ext
• Compression Spring: 0.294″ OD, 0.688″ Free Length 0.029″ Wire Dia, 3.136 lb Max Load, 8.641 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M2.50 x, 0.45, M, 2 Flute, Modified Bottoming, 6H Class of Fit, Cobalt, TICN Finish Right Hand Flute, Right Hand Thread, D3, Series B0459601
• Compression Spring: 0.294″ OD, 1.75″ Free Length 0.029″ Wire Dia, 3.97 lb Max Load, 3.697 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M8 x 1.25, Metric, 3 Flute, Modified Bottoming, 6H Class of Fit, TiAlN Finish 1.378″ Thread Length, 3.5433″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, 2B/3B, High Speed Steel, Uncoated 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series 750
• Spiral Flute Tap: M8 x 1.00, Metric Fine, 3 Flute, Modified Bottoming, 6H Class of Fit, TiAlN Finish 1.378″ Thread Length, 3.5433″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Compression Spring: 0.294″ OD, 1.625″ Free Length 0.03″ Wire Dia, 4.364 lb Max Load, 4.494 lb/in Spring Rate, Music Wire
• Compression Spring: 1.175″ OD, 3.5″ Free Length 0.098″ Wire Dia, 24.557 lb Max Load, 12.505 lb/in Spring Rate, Stainless Steel
• 2 Step Fiberglass Foldable Step Ladder: Type IA 300 lb Capacity 2' Height
• 1/4″ Head Diam, 13/64″ Shank Diam, 3 Flute 100° Cobalt Countersink Bright Finish, 1-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1331; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.528″ OD, 4″ Free Length 0.162″ Wire Dia, 99.184 lb Max Load, 48.861 lb/in Spring Rate, Music Wire
• Compression Spring: 1.88″ OD, 9″ Free Length 187.997 lb Max Load, 65.731 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.2229; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.645″ OD, 5.25″ Free Length 0.148″ Wire Dia, 71.988 lb Max Load, 23.237 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.093″ Dia, 0.074″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.351″ OD, 5.25″ Free Length 0.225″ Wire Dia, 193.172 lb Max Load, 163.366 lb/in Spring Rate, Stainless Steel
• Dovetail Cutter: 1 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Dovetail Cutter: 4 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Dovetail Cutter: 6 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Square End Mill: 15/32'' Dia, 1-1/4'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Kyocera TKFB12-28005 PR1725 Grade PVD Carbide, Triangle, Positive Rake Angle, Right-Hand Turning Insert for Light Interruption and Medium-Roughing in (P) Carbon/Alloy Steel
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.315″ Dia, 4 Flute, Solid Carbide 63 mm OAL, 8 mm Shank Dia, AlTiN Coated, Single End, Series HARVI
• Kyocera TKF 12R200GTP PR1725 Grade PVD Carbide, Irregular, Positive Rake Angle, Right-Hand Turning Insert for Light Interruption and Medium-Roughing in (S) Heat-Resistant Alloy and (M) Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• TKFB12R28015P-GQ Carbide Turning Insert Megacoat Nano Plus Finish, RH, 0.0059″ Corner Radius, 0.1181″ Thick, Irregular Shape, Series PR17
• Chucking Reamer: 0.143″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Compression Spring: 0.294″ OD, 1.625″ Free Length 0.029″ Wire Dia, 3.97 lb Max Load, 3.992 lb/in Spring Rate, Music Wire
• Compression Spring: 0.294″ OD, 1.375″ Free Length 0.03″ Wire Dia, 4.364 lb Max Load, 5.348 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.1378″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Compression Spring: 0.294″ OD, 2.625″ Free Length 0.03″ Wire Dia, 4.364 lb Max Load, 2.742 lb/in Spring Rate, Music Wire
• Compression Spring: 2.115″ OD, 3.25″ Free Length 0.207″ Wire Dia, 103.265 lb Max Load, 76.047 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 6″ Free Length 0.162″ Wire Dia, 79.395 lb Max Load, 31.915 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 0392
• Compression Spring: 0.823″ OD, 2.625″ Free Length 0.105″ Wire Dia, 41.357 lb Max Load, 40.461 lb/in Spring Rate, Stainless Steel
• Glass Cloth Tape; Width (Inch): 1-1/2; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 10.0000; Tensile Strength (Lb./Inch): 225.00; Maximum Operating Temperature (F): 500.000
• Compression Spring: 0.823″ OD, 2.25″ Free Length 0.112″ Wire Dia, 49.119 lb Max Load, 62.424 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 3.25″ Free Length 0.098″ Wire Dia, 28.66 lb Max Load, 17.391 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: MF10 x 1.25, MF, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, Vaporisiert Finish Right Hand Flute, Right Hand Thread, Series TC115
• Tapered End Mill: 15 ° per Side, 0.02″ Small Dia, 0.205″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• Compression Spring: 1.058″ OD, 4″ Free Length 0.092″ Wire Dia, 22.86 lb Max Load, 10.237 lb/in Spring Rate, Stainless Steel
• Polyester Film Tape: 3″ Wide, 72 yd Long, 3.3 mil Thick 50 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Jobber Length Drill Bit: 0.1929″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Tapered End Mill: 10 ° per Side, 0.03″ Small Dia, 0.19″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• Milling Insert: RPHX 1605M8SN-F50 CTPM245, CTPM245, Solid Carbide N/A Finish, 1.0000″ OAW
• Compression Spring: 1.351″ OD, 2.75″ Free Length 0.125″ Wire Dia, 41.475 lb Max Load, 30.505 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.2087″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Ball End Mill: 0.025″ Dia, 0.038″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• 5.5mm x 10' Buna-N Round Cord Stock 250°F Max, Shore 90A, 2,000 psi Tensile Strength, Black
• Tapered End Mill: 10 ° per Side, 0.02″ Small Dia, 0.205″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• 2.5mm x 5' EPDM Round Cord Stock 300°F Max, Shore 70A, 1,500 psi Tensile Strength, Black
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Press Fit Headless Drill Bushing: P, 5/16″ ID, 1/2″ OD 5/8″ OAL, Carbon Steel
• Compression Spring: 1.41″ OD, 4″ Free Length 0.112″ Wire Dia, 29.616 lb Max Load, 13.076 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.025″ Dia, 0.038″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Tapered End Mill: 20 ° per Side, 0.03″ Small Dia, 0.19″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• Compression Spring: 1.41″ OD, 5″ Free Length 0.148″ Wire Dia, 83.302 lb Max Load, 31.63 lb/in Spring Rate, Music Wire
• Duct Tape: 1″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Tapered End Mill: 15 ° per Side, 0.03″ Small Dia, 0.19″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• Tapered End Mill: 20 ° per Side, 0.02″ Small Dia, 0.205″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials