Products

• Polyester Film Tape: 1/4″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Corner Chamfer End Mill: 0.7087″ Dia, 1.2598″ LOC, 5 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated
• 15' Heavy-Duty Tie Down with S-Hook End Rubber, Black
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Chamfer End Mill: 0.9843″ Dia, 1.7717″ LOC, 5 Flute, 0.0276″ Chamfer Width, Solid Carbide 4.8 mm OAL, AlTiN Coated
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 1.2598″ Dia, 1.9685″ LOC, 5 Flute, 0.0276″ Chamfer Width, Solid Carbide 5.12 mm OAL, AlTiN Coated
• Socket-Mount Leveling Pads & Mounts; Leveling Mount Type: Studded; Thread Size: M12; Base Diameter (Inch): 2-5/32; Load Capacity (Lb.): 660.000; Load Capacity: 300.0; 660.0; Load Capacity (kg): 300.00; Overall Length (Inch): 5-19/32; Overall Length (Decim
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.7874″ Dia, 1.4961″ LOC, 5 Flute, 0.0236″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated
• Ball End Mill: 0.7874″ Dia, 1.4961″ LOC, 2 Flute, Solid Carbide Uncoated
• Corner Radius End Mill: 0.5512″ Dia, 1.0236″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.5512″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Tapered End Mill: 45 ° per Side, 0.02″ Small Dia, 0.121″ LOC, 2 Flutes, Solid Carbide, Ball End 1/4″ Shank Dia, 2-1/2″ OAL, Uncoated, Series Runner Cutters
• Grooving Insert: GDMS4020GM PR1225, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, AlTiN Coated
• Boring Bar PICCO R047.T6-22 IC908 CARB BORING BAR
• Grooving Insert: GDMS4020GM PR1535, Solid Carbide Megacoat Nano Finish, Neutral, 4 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Ball End Mill: 0.047″ Dia, 0.038″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• 1″ Long x 1″ Wide Grade 1 Brass Double Action Commercial Hinge Satin Chrome Finish, 0 Knuckles, 2 Holes
• Compression Spring: 0.294″ OD, 0.875″ Free Length 0.03″ Wire Dia, 4.364 lb Max Load, 8.629 lb/in Spring Rate, Music Wire
• Compression Spring: 0.823″ OD, 5.75″ Free Length 0.135″ Wire Dia, 105.909 lb Max Load, 58.856 lb/in Spring Rate, Music Wire
• Compression Spring: 0.94″ OD, 5.5″ Free Length 0.135″ Wire Dia, 94.09 lb Max Load, 44.791 lb/in Spring Rate, Music Wire
• Polyester Film Tape: 3/8″ Wide, 72 yd Long, 3.2 mil Thick 57 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Compression Spring: 0.94″ OD, 3″ Free Length 0.098″ Wire Dia, 30.355 lb Max Load, 20.978 lb/in Spring Rate, Stainless Steel
• Swivel Top Plate Caster: Polypropylene, 2-15/16″ Wheel Dia, 1-1/4″ Wheel Width, 209 lb Capacity, 3-13/16″ OAH 3.125″ Plate Length, 4.13″ Plate Width, No Brake
• Compression Spring: 0.999″ OD, 2.5″ Free Length 0.105″ Wire Dia, 34.529 lb Max Load, 29.661 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.999″ OD, 3.75″ Free Length 0.162″ Wire Dia, 146.271 lb Max Load, 130.068 lb/in Spring Rate, Music Wire
• Square End Mill: 3/32'' Dia, 0.139'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, RH Cut, RH Flute
• Tapered End Mill: 15 ° per Side, 0.093″ LOC, 3 Flutes, Solid Carbide, Square End 1″ Shank Dia, 1-1/2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• Compression Spring: 0.999″ OD, 3.25″ Free Length 0.177″ Wire Dia, 185.703 lb Max Load, 230.7 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.469″ OD, 2″ Free Length 0.207″ Wire Dia, 201.95 lb Max Load, 321.191 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.528″ OD, 3.75″ Free Length 0.162″ Wire Dia, 99.184 lb Max Load, 52.426 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.015″ Dia, 0.022″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.645″ OD, 6.5″ Free Length 0.135″ Wire Dia, 55.744 lb Max Load, 13.532 lb/in Spring Rate, Music Wire
• Plastic Sheet: POM, 2" Thick, 24" Wide, 2' Long, Natural, 9700 psi Tensile Strength
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• High Temperature Masking Tape: 1-1/2″ Wide, 60 yd Long, 7 mil Thick, Tan Crepe Paper, Rubber Adhesive, 31 lb/in Tensile Strength
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.175″ OD, 3.25″ Free Length 0.098″ Wire Dia, 24.557 lb Max Load, 13.529 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Boring Bar
• Boring Bar
• Square End Mill:
• Press Fit Headless Drill Bushing: HM, 15.5″ ID Steel
• Jobber Length Drill Bit: 0.104″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 1/8'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Point Tap: #1-72, UNF, 2 Flutes, Plug, 3B, High Speed Steel, Uncoated 3/8″ Thread Length, 1-11/16″ OAL, Right Hand, H1, Series 750
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: CPMT21.52PM T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Boring Bar
• Screw Machine Length Drill Bit: 0.25″ Dia, 120 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1100
• Compression Spring: 0.764″ OD, 3.5″ Free Length 0.092″ Wire Dia, 31.069 lb Max Load, 20.453 lb/in Spring Rate, Stainless Steel
• Adjustable Stop Replacement Roll
• Square End Mill: 0.045'' Dia, 0.068'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.764″ OD, 2.875″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 32.339 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.764″ OD, 1.75″ Free Length 0.125″ Wire Dia, 70.117 lb Max Load, 160.091 lb/in Spring Rate, Stainless Steel
• Polyester Film Tape: 1″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Compression Spring: 0.881″ OD, 4.5″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 9.143 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 4.75″ Free Length 0.085″ Wire Dia, 19.46 lb Max Load, 7.124 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 8″ Free Length 48.29 lb Max Load, 9.38 lb/in Spring Rate, Music Wire
• Kyocera PNMU 0905XNERGM PR1535 Grade PVD Carbide, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Roughing in (P) Mold Steel, (M) Precipitation Hardened Stainless Steel and (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (S) Heat-Resi
• Compression Spring: 1.704″ OD, 6.5″ Free Length 0.135″ Wire Dia, 53.891 lb Max Load, 12.855 lb/in Spring Rate, Music Wire
• Kyocera PNMU 0905XNERGM PR1510 Grade PVD Carbide, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron
• Compression Spring: 1.586″ OD, 3″ Free Length 0.177″ Wire Dia, 122.347 lb Max Load, 88.139 lb/in Spring Rate, Music Wire
• Kyocera PNMU 0905XNERSM PR1510 Grade PVD Carbide, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron
• Kyocera PNMU 0905XNERSM PR1525 Grade PVD Carbide, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel and (M) Austenitic Stainless Steel
• Ball End Mill: 0.315″ Dia, 0.8661″ LOC, 3 Flute, Solid Carbide 63 mm OAL, 8 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Kyocera PNMU 0905XNERGH PR1535 Grade PVD Carbide, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Roughing in (P) Mold Steel, (M) Precipitation Hardened Stainless Steel and (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (S) Heat-Resi
• Kyocera SNMU 130508ENSM PR1510 Grade PVD Carbide, 90 Degree Square, Negative Rake Angle, Neutral Milling insert for Roughing in (K) Gray Cast Iron
• Corner Radius End Mill: 1/8″ Dia, 5/32″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Ball End Mill: 0.25″ Dia, 0.375″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9797; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Kyocera PNMU 0905XNERGH PR015S Grade PVD Carbide, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Roughing in (H) Hardened Materials
• Ball End Mill: 0.078″ Dia, 0.55″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Kyocera SNMU 130508ENGH PR015S Grade PVD Carbide, 90 Degree Square, Negative Rake Angle, Neutral Milling insert for Roughing in (H) Hardened Materials and n/a
• Corner Radius End Mill: 0.1562″ Dia, 0.235″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Kyocera SNMU 130508ENSM PR1525 Grade PVD Carbide, 90 Degree Square, Negative Rake Angle, Neutral Milling insert for Roughing in (P) Free-Cutting Steel
• Corner Radius End Mill: 3/32″ Dia, 0.585″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Ball End Mill: 0.062″ Dia, 0.437″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Kyocera SNMU 130508ENGH PR1525 Grade PVD Carbide, 90 Degree Square, Negative Rake Angle, Neutral Milling insert for Roughing in (P) Free-Cutting Steel
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Kyocera PNMU 0905XNERGH PR1510 Grade PVD Carbide, Indexable Milling Insert, Pentagon, Rake Angle, Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1562″ Dia, 0.47″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Left Hand, 1.5 mm Cutting Width, 3.5 mm Max Depth, Series HYBCERM
• Corner Radius End Mill: 0.1562″ Dia, 0.235″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1562″ Dia, 0.47″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Right Hand, 4 mm Cutting Width, 5 mm Max Depth, Series HYBCERM
• Ball End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: KDMB16M0ERGN, KCU15, N/A Finish, 0.6300″ OAW
• Damping Stays; Type: Heavy-Duty Free-Stop Spring Loaded Lid Stay; Capacity: 78.000; Overall Length (mm): 151.3000; Thickness (mm): 15.4; Width (mm): 39.40; Side: Universal; Maximum Opening: 80.000; Finish/Coating: Plain; Mounting Hole Size Diameter: 4.700
• Damping Stays; Type: Heavy-Duty Free-Stop Spring Loaded Lid Stay; Capacity: 104.000; Overall Length (mm): 151.3000; Thickness (mm): 15.4; Width (mm): 39.40; Side: Back Panel; Maximum Opening: 80.000; Finish/Coating: Plain; Mounting Hole Size Diameter: 4.7
• Damping Stays; Type: Heavy-Duty Free-Stop Spring Loaded Lid Stay; Capacity: 78.000; Overall Length (mm): 151.3000; Thickness (mm): 15.4; Width (mm): 39.40; Side: Back Panel; Maximum Opening: 80.000; Finish/Coating: Plain; Mounting Hole Size Diameter: 4.70
• Duct Tape: 2″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• 1/4″ Head Diam, 1/4″ Shank Diam, 1 Flute 90° Cobalt Countersink Bright Finish, 1-1/2″ OAL, Single End
• Square End Mill: 0.2362″ Dia, 0.3543″ LOC, N/A Flutes, Solid Carbide SingleEnd, AplusFinish, Helical FluteFlute, N/A Mfr Grade Solid Carbide, Series End Mills for Steels - 4 Flute - Square - Metric - Variable Pitch
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 1.75 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Compression Spring: 1.293″ OD, 2.5″ Free Length 0.25″ Wire Dia, 261.179 lb Max Load, 730.24 lb/in Spring Rate, Stainless Steel
• Damping Stays; Type: Heavy-Duty Free-Stop Spring Loaded Lid Stay; Capacity: 104.000; Overall Length (mm): 151.3000; Thickness (mm): 15.4; Width (mm): 39.40; Side: Universal; Maximum Opening: 80.000; Finish/Coating: Plain; Mounting Hole Size Diameter: 4.70
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 2 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• O-Ring: 1-1/8″ ID x 1-3/8″ OD, 1/8″ Thick, Dash 216, HNBR Round Cross Section
• Compression Spring: 1.41″ OD, 9.5″ Free Length 242.777 lb Max Load, 126.619 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 2.3 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Compression Spring: 0.705″ OD, 2.5″ Free Length 0.105″ Wire Dia, 47.603 lb Max Load, 59.703 lb/in Spring Rate, Stainless Steel
• Press Fit Headed Drill Bushing: Type H, R ID, 5/8″ OD
• All Purpose Lever Lockset for 1-3/8 to 1-7/8″ Thick Doors No Cylinder, 2-3/8″ Backset, Satin Chrome Finish
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Left Hand, 1.5 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Compression Spring: 0.823″ OD, 4.75″ Free Length 0.148″ Wire Dia, 135.637 lb Max Load, 110.344 lb/in Spring Rate, Music Wire
• Press Fit Headed Drill Bushing: Type H, #22 ID, 5/16″ OD
• Compression Spring: 1.469″ OD, 6″ Free Length 0.162″ Wire Dia, 76.412 lb Max Load, 29.555 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.823″ OD, 6.75″ Free Length 0.125″ Wire Dia, 85.968 lb Max Load, 35.406 lb/in Spring Rate, Music Wire
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 3.3 mm Cutting Width, 4 mm Max Depth, Series GBA
• Press Fit Headed Drill Bushing: Type H, #7 ID, 1/2″ OD
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Left Hand, 2.5 mm Cutting Width, 4 mm Max Depth, Series GBA
• Press Fit Headed Drill Bushing: Type H, #24 ID, 5/16″ OD
• Press Fit Headed Drill Bushing: Type H, #14 ID, 5/16″ OD
• Dovetail Cutter: 2 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 1.5 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.3779″ OAL, 0.0039″ Corner Radius
• Press Fit Headed Drill Bushing: Type H, 13/64″ ID, 3/8″ OD
• Compression Spring: 0.881″ OD, 6.75″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 30.256 lb/in Spring Rate, Music Wire
• Clear Double-Sided Polyester Film Tape: 1″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Left Hand, 1.45 mm Cutting Width, 2 mm Max Depth, Series GBA
• Press Fit Headed Drill Bushing: Type H, 27/64″ ID, 3/4″ OD
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Left Hand, 3 mm Cutting Width, 4 mm Max Depth, Series GBA
• Compression Spring: 0.999″ OD, 5.75″ Free Length 0.135″ Wire Dia, 89.033 lb Max Load, 37.351 lb/in Spring Rate, Music Wire
• Press Fit Headed Drill Bushing: Type H, 15/64″ ID, 13/32″ OD
• Jobber Length Drill Bit: 0.2953″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 1.351″ OD, 3.75″ Free Length 0.112″ Wire Dia, 30.855 lb Max Load, 14.897 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 2.65 mm Cutting Width, 4 mm Max Depth, Series GBA
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headed Drill Bushing: Type H, 19/64″ ID, 1/2″ OD
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 2.5 mm Cutting Width, 4 mm Max Depth, Series GBA
• Press Fit Headed Drill Bushing: Type H, 33/64″ ID, 3/4″ OD
• Corner Radius End Mill: 0.0787″ Dia, 0.1181″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.01″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Compression Spring: 1.88″ OD, 3″ Free Length 0.177″ Wire Dia, 104.224 lb Max Load, 65.449 lb/in Spring Rate, Music Wire
• Press Fit Headed Drill Bushing: Type H, 5/16″ ID, 3/4″ OD
• Square End Mill: 3/64'' Dia, 0.4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Left Hand, 2.3 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Press Fit Headed Drill Bushing: Type H, 3/16″ ID, 5/16″ OD
• Square End Mill: 0.045'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GBA43F TN620, Cermet TiCN Finish, Right Hand, 4.8 mm Cutting Width, 5 mm Max Depth, Series GBA
• Press Fit Headed Drill Bushing: Type H, 7/16″ ID, 3/4″ OD
• Press Fit Headed Drill Bushing: Type H, 3/8″ ID, 3/4″ OD
• Tie Down Kit; Type: Bungee Kit; Overall Length (Feet): 10.00; Head/Holder Diameter (Inch): 1/4; Color: Black; Number of Hooks: 6
• Compression Spring: 1.41″ OD, 2.5″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 192.954 lb/in Spring Rate, Music Wire
• Square End Mill: 25/64'' Dia, 7/8'' LOC, 7/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 35 ° Helix, Centercutting, RH Cut, RH Flute, Series SAP-NB
• FRE-0500-062 JC8015 Carbide Milling Insert 1/2″ Long x 0.118″ Thick x 0.407″ Wide
• Chucking Reamer: 0.1855″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, Cobalt 6 Flute
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Right Hand, 3 mm Cutting Width, 5 mm Max Depth, Series GBA
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Right Hand, 2.65 mm Cutting Width, 5 mm Max Depth, Series GBA
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Right Hand, 2.5 mm Cutting Width, 5 mm Max Depth, Series GBA
• SpyroTec 3/8″ Head Diam, 0.09″ Cut Diam, 1/4″ Shank Diam, 3 Flute 82° Cobalt Countersink TiAlN Finish, 2″ OAL, Single End, 1/4″ 3-Flat Shank, Right Hand Cut
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Left Hand, 2.3 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Right Hand, 2 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 0.9 mm Max Depth, Series 25679
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Left Hand, 4 mm Cutting Width, 5 mm Max Depth, Series GBA
• Grooving Insert: AA, Solid Carbide TiCN Finish, Right Hand, 4.2 mm Cutting Width, 0.7 mm Max Depth, Series 25656
• Grooving Insert: AA, Solid Carbide TiCN Finish, Right Hand, 4.2 mm Cutting Width, 0.4 mm Max Depth, Series 25656
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 27.80; Load Capacity: 100 lbs; Rod Diameter (Decimal Inch): 0.35; Tube Diameter: 0.870; End Fitting Connection: Plastic Ball Socket; Compressed Length: 17.8; Extension
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Right Hand, 3.5 mm Cutting Width, 5 mm Max Depth, Series GBA
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 0.58 mm Max Depth, Series 25672
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 27.80; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.35; Tube Diameter: 0.870; End Fitting Connection: Plastic Ball Socket; Compressed Length: 17.8; Extension
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 1.48 mm Max Depth, Series 25673
• Compression Spring: 2.056″ OD, 6.75″ Free Length 0.162″ Wire Dia, 55.529 lb Max Load, 15.101 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Left Hand, 3.5 mm Cutting Width, 5 mm Max Depth, Series GBA
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 27.80; Load Capacity: 200 lbs; Rod Diameter (Decimal Inch): 0.35; Tube Diameter: 0.870; End Fitting Connection: Plastic Ball Socket; Compressed Length: 17.8; Extension
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 1.1 mm Max Depth, Series 25678
• Compression Spring: 2.233″ OD, 5.25″ Free Length 0.177″ Wire Dia, 64.902 lb Max Load, 23.581 lb/in Spring Rate, Stainless Steel
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 0.9 mm Max Depth, Series 25678
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Left Hand, 3.3 mm Cutting Width, 5 mm Max Depth, Series GBA
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 27.80; Load Capacity: 150 lbs; Rod Diameter (Decimal Inch): 0.35; Tube Diameter: 0.870; End Fitting Connection: Plastic Ball Socket; Compressed Length: 17.8; Extension
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 1.16 mm Max Depth, Series 25672
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Right Hand, 1.75 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 1.2 mm Max Depth, Series 25679
• Compression Spring: 1.116″ OD, 1.625″ Free Length 0.125″ Wire Dia, 49.667 lb Max Load, 76.897 lb/in Spring Rate, Stainless Steel
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 0.86 mm Max Depth, Series 25673
• Grooving Insert: GBA43GM TN620, Cermet TiCN Finish, Left Hand, 1.4 mm Cutting Width, 3.5 mm Max Depth, Series GBA
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 1.4 mm Max Depth, Series 25678
• Corner Radius End Mill: 5/16″ Dia, 0.812″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 1.48 mm Max Depth, Series 25672
• Kyocera TNMG 331 PV7005 Grade PVD Cermet, 0 Degree, Triangle, Negative Rake Angle, Neutral Turning Insert for Continuous and Roughing in (K) Gray Cast Iron
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 1 mm Max Depth, Series 25679
• Milling Insert: ONEX 0806ANEN-M5 CTPM226, CTPM226, Solid Carbide N/A Finish, 1.0000″ OAW
• White Double-Sided Foam Tape: 3/4″ Wide, 6 yd Long, 62 mil Thick, Acrylic Adhesive
• Compression Spring: 0.705″ OD, 4.25″ Free Length 0.085″ Wire Dia, 27.035 lb Max Load, 14.341 lb/in Spring Rate, Stainless Steel
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 0.8 mm Max Depth, Series 25679
• Lockset Accessories; Type: Service Equipment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: Service Equipment; For Use With: Best
• Grooving Insert: AA, Solid Carbide TiCN Finish, Right Hand, 4.2 mm Cutting Width, 0.6 mm Max Depth, Series 25656
• Spiral Point Tap: M4 x 0.7, Metric, 2 Flutes, Plug, 6H, High Speed Steel, ZrN Finish 12 mm Thread Length, 63 mm OAL, Right Hand, Series CoroTap 200
• Lockset Accessories; Type: Service Equipment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: Service Equipment; For Use With: Best
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 1 mm Max Depth, Series 25678
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 1.4 mm Max Depth, Series 25679
• Compression Spring: 0.588″ OD, 3.5″ Free Length 0.092″ Wire Dia, 39.417 lb Max Load, 35.922 lb/in Spring Rate, Stainless Steel
• Lockset Accessories; Type: Service Equipment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: Service Equipment; For Use With: Best
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 1.16 mm Max Depth, Series 25673
• Compression Spring: 0.823″ OD, 1.25″ Free Length 0.148″ Wire Dia, 101.794 lb Max Load, 447.974 lb/in Spring Rate, Stainless Steel
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 0.8 mm Max Depth, Series 25678
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 1.1 mm Max Depth, Series 25679
• Compression Spring: 0.999″ OD, 2.625″ Free Length 0.105″ Wire Dia, 34.529 lb Max Load, 28.126 lb/in Spring Rate, Stainless Steel
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 0.86 mm Max Depth, Series 25672
• Grooving Insert: AA, Solid Carbide Uncoated, Right Hand, 4.2 mm Cutting Width, 1.2 mm Max Depth, Series 25678
• Grooving Insert: AA, Solid Carbide Uncoated, Left Hand, 4.2 mm Cutting Width, 0.58 mm Max Depth, Series 25673
• Grooving Insert: GVF400020B PR1225, Solid Carbide Megacoat, Right Hand, 4 mm Cutting Width, 5.3 mm Max Depth, Series GFV
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 25; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.97
• Turning Insert: TCGT32.51FN_A5 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Compression Spring: 1.469″ OD, 2.75″ Free Length 38.293 lb Max Load, 26.805 lb/in Spring Rate, Stainless Steel
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 3; End Mill Material: Solid Carbide; Overall Length: 1.57
• Turning Insert: DCGW32.53FN_A4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Chucking Reamer: 0.3415″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Corner Radius End Mill: 1/4″ Dia, 0.2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: SCGW431FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 90.0 &deg N/A Square, Series SCGW
• Turning Insert: DCGW32.52FN_A4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Chucking Reamer: 0.3375″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 13.85; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 8.35; Extension Force: 9
• Turning Insert: CCGW431FN_A4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 13.85; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 8.35; Extension Force:
• Turning Insert: SCGW433FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 90.0 &deg N/A Square, Series SCGW
• Chucking Reamer: 0.3305″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 13.85; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 8.35; Extension Force: 2
• Square End Mill: 0.3937'' Dia, 0.9843'' LOC, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: 1/4-20, UNC, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-8 Finish 3.15″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50S810
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 13.85; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 8.35; Extension Force: 3
• Chucking Reamer: 0.3255″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Ball End Mill: 0.035″ Dia, 0.105″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: DCGW32.51FN_A4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 13.85; Load Capacity: 45 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 8.35; Extension Force: 4
• Chucking Reamer: 0.3235″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Turning Insert: DCGW32.5.5FNA5 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Ball End Mill: 0.025″ Dia, 0.075″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 13.85; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Threaded End; Compressed Length: 8.35; Extension Force: 6
• Spiral Flute Tap: 5/16-18, UNC, Bottoming, 2B Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, H5, Series B0513500
• Turning Insert: DCMT21.50.5PS AH120, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 1.469″ OD, 8″ Free Length 337.338 lb Max Load, 156.248 lb/in Spring Rate, Music Wire
• Compression Spring: 0.764″ OD, 8″ Free Length 0.135″ Wire Dia, 85.624 lb Max Load, 44.088 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 4.25″ Free Length 242.777 lb Max Load, 303.886 lb/in Spring Rate, Stainless Steel
• Turning Insert: CPMT32.51PSS AH725, Solid Carbide TiAlN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Ball End Mill: 0.3125″ Dia, 2 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Single End, Series 2014
• Corner Radius End Mill: 0.015″ Dia, 0.045″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Square End Mill: 3/64'' Dia, 0.075'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• CNMG431EEG AC6030M Carbide Turning Insert Absotech Finish, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, Series AC6000M
• Square End Mill: 0.075'' Dia, 0.113'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• CNMG431ELUW AC6030M Carbide Turning Insert Absotech Finish, 0.5079″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, Series AC6000M
• Ball End Mill: 0.3438″ Dia, 1″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Uncoated, Single End