Products

• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar: 0.176″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1379; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Spiral Flute Tap: #12-28, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.15″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C310
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar: 0.176″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Turning Insert: CCMT21.51PM T6120, Solid Carbide TiCN & TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Square End Mill: 1/64'' Dia, 0.023'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1682; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Boring Bar: 0.176″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Square End Mill: 0.3937'' Dia, 0.9843'' LOC, 2 Flutes, Solid Carbide Single End, ZrN Finish, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CNGG 12 04 08-SGF S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• Spiral Flute Tap: M3.50 x 0.60, Metric, 3 Flute, Semi-Bottoming, 6GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D6 & D7, Series 4625
• Straight Flutes Tap: 9/16-18, UNF, 4 Flutes, Taper, 2B & 3B, High Speed Steel, TiN Finish 1-21/32″ Thread Length, 3-19/32″ OAL, Right Hand, H3, Series 729
• Undercutting End Mills; Mill Diameter (Inch): 1/8; Overall Length (Inch): 3; Radius: 0.0625; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 1.1250; Shank Diameter (Inch): 1/8
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CNGG 12 04 04-SGF S205, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Diamond 80 ™, Series T-Max P
• Chucking Reamer: 0.1725″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Ball End Mill: 0.0787″ Dia, 0.2362″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 42 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: YG602G, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width
• 90° 50mm OAL Spotting Drill 16mm Flute Length, 5mm Shank Diam
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: TSAA K10, Solid Carbide Uncoated, Neutral, 0.188″ Cutting Width, Series TSA
• Corner Radius End Mill: 1/8" Dia, 1/4" LOC, 0.0150" Radius, 5 Flute, Solid Carbide
• 0.2362″ Cut Diam, 7/8″ Flute Length, Solid Carbide Solid Counterbore AlTiN Finish, 4 Flutes, 1/4″ Shank Diam, 2-1/2 OAL
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Point Tap: #10-32, UNF & DIN 371, 3 Flutes, Plug, 2B, HSS-E, TiN Finish 13 mm Thread Length, 70 mm OAL, Right Hand, Series TC216
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1028; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Insert: YG602G, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width
• Screw Machine Length Drill Bit: 0.126″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Catches; Type: High Temperature Long Stroke Non-Magnetic Touch Latch; Length (mm): 130.50; Height (mm): 17.0000; Width (mm): 45.00; Finish/Coating: Black; Strike Length: 52.00; Strike Width: 15.00; Minimum Order Quantity: Glass-Filled Polyamide; Glass-Fil
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 583
• Grooving Insert: YG602, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width
• Grooving Insert: YG602, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 583
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: YG602G, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: YG602, Solid Carbide TiAlN Finish, Neutral, 0.118″ Cutting Width
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.764″ OD, 6.75″ Free Length 0.148″ Wire Dia, 108.365 lb Max Load, 81.724 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M3 x 0.50, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Left Hand Flute, Left Hand Thread, D3 & D4, Series 4629
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.174″ OD, 7.5″ Free Length 236.629 lb Max Load, 67.927 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.821″ OD, 9.5″ Free Length 0.225″ Wire Dia, 208.569 lb Max Load, 49.644 lb/in Spring Rate, Music Wire
• Milling Insert: RPNX 1605M8SN CTPK220, CTPK220, Solid Carbide N/A Finish, 1.0000″ OAW
• Milling Inserts; Insert Style: TPKN; Insert Size: 2204; Insert Material: Solid Carbide; Width (Inch): 1/2; Manufacturer Grade: YG602; Length (Inch): 1/2; Thickness (Inch): 3/16; Series: TPKN; Cutting Direction: Right Hand; Coating/Finish: TiAlN
• Compression Spring: 1.41″ OD, 8″ Free Length 349.474 lb Max Load, 174.734 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Inserts; Insert Style: TPKN; Insert Size: 2204; Insert Material: Solid Carbide; Width (Inch): 1/2; Manufacturer Grade: YG602; Length (Inch): 1/2; Thickness (Inch): 3/16; Series: TPKN; Cutting Direction: Right Hand; Coating/Finish: TiAlN
• Milling Insert: RPNX 1605M8SN-M50 CTPP235, CTPP235, Solid Carbide N/A Finish, 1.0000″ OAW
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Inserts; Insert Style: TPKN; Insert Size: 2204; Insert Material: Solid Carbide; Width (Inch): 1/2; Manufacturer Grade: YG602; Length (Inch): 1/2; Thickness (Inch): 3/16; Series: TPKN; Cutting Direction: Right Hand; Coating/Finish: TiAlN
• Milling Insert: XOLX 120410SR-M50 CTPP235, CTPP235, Solid Carbide N/A Finish, 1.0000″ OAW
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Inserts; Insert Style: TPKR; Insert Size: 2204; Insert Material: Solid Carbide; Width (Inch): 1/2; Manufacturer Grade: YG602; Length (Inch): 1/2; Thickness (Inch): 3/16; Series: TPKR; Cutting Direction: Right Hand; Coating/Finish: TiAlN
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Inserts; Insert Style: TPKR; Insert Size: 2204; Insert Material: Solid Carbide; Width (Inch): 1/2; Manufacturer Grade: YG602; Length (Inch): 1/2; Thickness (Inch): 3/16; Series: TPKR; Cutting Direction: Right Hand; Coating/Finish: TiAlN
• Turning Insert: DCMT32.52MT TT8020, Solid Carbide TiCN Finish, Neutral, 0.4570″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Milling Insert: SNHU 120408SR-R50 CTCK215, CTCK215, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: SNHU 120408FR-F10 CTWN215, CTWN215, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Inserts; Insert Style: XBAD; Insert Size: 160; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Length Range (Decimal Inch): 0.5000 to 0.6000; Series: XBAD; Coating/Finish: DLC; Width (D
• Milling Insert: AH8015, Solid Carbide N/A Finish,
• Milling Insert: SNHU 120416FR-F10 CTWN215, CTWN215, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: 0.1255″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Spiral Flute Tap: M2.5, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Milling Inserts; Insert Style: XRAD; Insert Size: 20020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Length Range (Decimal Inch): 0.5000 to 0.6000; Series: XRAD; Coating/Finish: DLC; Width
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: SNHU 120412FR-F10 CTWN215, CTWN215, Solid Carbide N/A Finish,
• Milling Inserts; Insert Style: XRAD; Insert Size: 16010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Length Range (Decimal Inch): 0.5000 to 0.6000; Series: XRAD; Coating/Finish: DLC; Width
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M1.60, Metric, 2 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, Vaporisiert Finish Right Hand Flute, Right Hand Thread, Series TC115
• Milling Inserts; Insert Style: XRAD; Insert Size: 16005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.1500 to 0.1750; Length Range (Decimal Inch): 0.5000 to 0.6000; Series: XRAD; Coating/Finish: DLC; Width
• Turning Insert: DNMG150404EA TT9080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.4570″ Long, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMT
• Compression Spring: 1.58″ OD, 3.5″ Free Length 0.207″ Wire Dia, 135.558 lb Max Load, 118.286 lb/in Spring Rate, Stainless Steel
• Electromagnet Lock Accessories; Type: Door Cord; For Use With: Access Control; Material: Brass; Material: Brass; For Use With: Access Control; Type: Door Cord; Accessory Type: Door Cord; Type: Door Cord
• Milling Insert: AH3135, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: AH3135, Solid Carbide N/A Finish,
• Duct Tape: 1″ Wide, 5 mil Thick, Stainless Steel Acrylic Adhesive, 150 lb/in Tensile Strength
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.2091″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Screw Machine Length Drill Bit: 0.2362″ Dia, 140 °, Solid Carbide TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series B041CPG
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.1992″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.2283″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Jobber Length Drill Bit: 0.2441″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• 1/16″ x 50' Buna-N Round Cord Stock 250°F Max, Shore 70A, 2,050 psi Tensile Strength, Black
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M6, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Screw Machine Length Drill Bit: 0.1935″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.005″ Dia, 0.007″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Milling Insert: RPNX 1204M8SN-M50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.003″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 0.025'' Dia, 13/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: RPNX 1204M8SN-F50 CTCP230, CTCP230, Solid Carbide N/A Finish,
• Ball End Mill: 0.005″ Dia, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Grooving Insert: GMM4020040MW PR915, Solid Carbide TiAlN Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series KGM
• Milling Insert: RPNX 1204M8SN-F50 CTPP235, CTPP235, Solid Carbide N/A Finish,
• Ball End Mill: 0.005″ Dia, 0.015″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Grooving Insert: GMM4020040MW PR930, Solid Carbide TiCN Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series KGM
• Grooving Insert: GMM402004V PR930, Solid Carbide TiCN Finish, Neutral, 4 mm Cutting Width, 11 mm Max Depth, Series KGM
• Corner Radius End Mill: 5/16″ Dia, 0.812″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Rigid Top Plate Caster: Polypropylene, 3″ Wheel Dia, 1-1/4″ Wheel Width, 209 lb Capacity, 3-13/16″ OAH 2.4375″ Plate Length, 4.88″ Plate Width, No Brake
• Screw Machine Length Drill Bit: 0.2874″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series HP243
• Corner Radius End Mill: 5/16″ Dia, 0.812″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• O-Ring: 8″ ID x 8-1/4″ OD, 1/8″ Thick, Dash 266, HNBR Round Cross Section
• Compression Spring: 1.88″ OD, 9.5″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 46.53 lb/in Spring Rate, Music Wire
• Compression Spring: 2.056″ OD, 7.5″ Free Length 249.222 lb Max Load, 75.931 lb/in Spring Rate, Music Wire
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Torx Drivers; End Type: Tamper-Resistant Torx; Torx Size: T40; Handle Type: Comfort Grip; Tip Material: Steel; Handle Material: Plastic; Finish: Chrome
• Work Gloves: Impacto 401-30, Size X-Large, Leather Lined, Leather, Impact
• Compression Spring: 1.586″ OD, 3.25″ Free Length 0.207″ Wire Dia, 135.087 lb Max Load, 131.813 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 3/8-16, UNC, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-8 Finish 0.866″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, H5, Series BU50S800
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.937″ OAL, Right Hand Flute, Right Hand Thread, H4, Series BU50C310
• Ball End Mill: 0.125″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Single End
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.866″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, H5, Series BU50C300
• Turning Insert: RCGX88S6015 KYHK15B, Ceramic AlTiN Finish, Neutral, 1″ Inscribed Circle, N/A Round, Series RCGX
• Ball End Mill: 0.062″ Dia, 0.248″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Single End
• Turning Insert: RCGX88P8015 KYHK15B, Ceramic AlTiN Finish, Neutral, 1″ Inscribed Circle, N/A Round, Series RCGX
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Square End Mill: 9/64'' Dia, 3/4'' LOC, 3/16'' Shank Dia, 3'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.031″ Dia, 5/32″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• 5B90N-090504E-NL 1010 Carbide Milling Insert TiAlN Finish, 9.5mm Thick x 5mm Wide
• Corner Radius End Mill: 0.047″ Dia, 1/4″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Square End Mill: 1/64'' Dia, 0.1'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: ROHX2006M08-A57 WKP35G, WKP35G, Solid Carbide N/A Finish,
• TCMX222-WF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 1/8″ Thick, 60° Triangle
• Turning Insert: VCMT220.5PS AH8015, Solid Carbide TiAlN Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 35.0 &deg N/A Diamond, Series VCMT
• Press Fit Headless Drill Bushing: P, 7/8″ ID, 1-1/8″ OD 3/4″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 1″ ID, 1-1/8″ OD 3/4″ OAL, Carbon Steel
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.004″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Point Tap: #12-28, UNF, 3 Flutes, Plug, 2BX, HSS-E, Sirius Finish 80 mm OAL, Right Hand, H4/H5 Series 4643
• Ball End Mill: 0.1406″ Dia, 0.5625″ LOC, 3 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Milling Insert: SDMT 120508ER-F50 CTPM245, CTPM245, Solid Carbide N/A Finish, 1.0000″ OAW
• Polyethylene Film Tape: 2″ Wide, 1,000' x 3 mil Thick 3,800 Lb/In Tensile Strength, Water Based Acrylic Adhesive
• Milling Insert: XDKT 070304ER-F40 CTPM245, CTPM245, Solid Carbide N/A Finish,
• Ball End Mill: 0.375″ Dia, 0.875″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Open End Wrench: 6 mm x 8 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Milling Insert: XDKT 070308ER-F40 CTPM245, CTPM245, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Open End Wrench: 5.5 mm x 7 mm, Double End Head 15 ° Head Angle, Vanadium Steel, Chrome-Plated
• Work Gloves: Impacto Size X-Large, Not Lined, Nylon, VEP & Grain Leather, General Purpose
• Square End Mill: 1/16'' Dia, 1/4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.1406″ Dia, 0.5625″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Work Gloves: Impacto Size X-Small, Not Lined, Nylon, VEP & Grain Leather, General Purpose
• Square End Mill: 3/32'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.0197'' Dia, 0.0591'' LOC, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.055'' Dia, 0.165'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Press Fit Headless Drill Bushing: HM, 3.7″ ID Steel
• Compression Spring: 1.469″ OD, 9″ Free Length 0.148″ Wire Dia, 60.148 lb Max Load, 14.083 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 7/8″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Press Fit Headless Drill Bushing: HM, 4.2″ ID Steel
• Turning Insert: 175.32-19 1940-25 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1575″ Corner Radius, N/A Series 175.32
• Spiral Flute Tap: 5/16-18, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Hardlube Finish 1.378″ Thread Length, 3.5433″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Corner Radius End Mill: 3/8″ Dia, 7/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Press Fit Headless Drill Bushing: HM, 4.25″ ID Steel
• Press Fit Headless Drill Bushing: HM, 4.8″ ID Steel
• Turning Insert: CCGT2152FNA3CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• GN352-60-20-M10-S-40 RUBBER BUMPER
• Square End Mill: 5/16'' Dia, 15/32'' LOC, 5/16'' Shank Dia, 2'' OAL, 7 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 36 ° Helix, RH Cut, RH Flute, Series VGM7
• Turning Insert: TCGT18151FNA3CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 6 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.03″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: CCGT2151FNA3CB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: TCGT18155FNA4CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Turning Insert: TCGT18151FNA3CB2, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Ball End Mill: 0.0118″ Dia, 0.0197″ LOC, 2 Flute, Solid Carbide 37.5 mm OAL, 3 mm Shank Dia, 20 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.004″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• White Double-Sided Urethane Foam Tape: 1/2″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.002″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.2165″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.005″ Radius, 6 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlCrO-MAX Finish, Upcut Flute, 38 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Compression Spring: 0.294″ OD, 0.563″ Free Length 0.03″ Wire Dia, 4.364 lb Max Load, 13.996 lb/in Spring Rate, Music Wire
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Compression Spring: 0.294″ OD, 0.75″ Free Length 0.03″ Wire Dia, 4.364 lb Max Load, 10.192 lb/in Spring Rate, Music Wire
• Grooving Insert: TDFTT AB30, Ceramic Uncoated, Right Hand, 0.157″ Cutting Width, Series TDFT-E CE
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• O-Ring: 0.69″ ID x 1.03″ OD, 0.16″ Thick, Ethylene Propylene Diene Monomer Round Cross Section
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Polyester Film Tape: 1/4″ Wide, 72 yd Long, 3.5 mil Thick 50 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Square End Mill: 0.025'' Dia, 0.038'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, 38 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.881″ OD, 2.5″ Free Length 0.105″ Wire Dia, 38.834 lb Max Load, 37.302 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Milling Insert: RDPX1003M0SHN, KCKP10, Solid Carbide N/A Finish,
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Turning Insert: VCGT220530NAG H1, Solid Carbide Uncoated Finish, Neutral, 0.8701″ Long, 1/2″ Inscribed Circle, 0.1181″ Corner Radius, 35.0 &deg N/A Diamond, Series H1
• Polyester Film Tape: 1/2″ Wide, 72 yd Long, 3.2 mil Thick 57 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Ball End Mill: 0.125″ Dia, 1.5″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Chamfer End Mill: 0.315″ Dia, 0.9449″ LOC, 5 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.76 mm OAL, AlTiN Coated
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 5 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2314; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Straight Flutes Tap: 3/8-24, UNF, 4 Flutes, Bottoming, 2B & 3B, High Speed Steel, TiN Finish 1-1/4″ Thread Length, 2-15/16″ OAL, Right Hand, H3, Series 729
• Corner Chamfer End Mill: 0.7087″ Dia, 1.2598″ LOC, 5 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Duct Tape: 2″ Wide, 10.5 mil Thick, Cotton Cloth Natural Rubber Adhesive, 36 lb/in Tensile Strength
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 4 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Black; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 7.0000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 1.351″ OD, 4.75″ Free Length 0.177″ Wire Dia, 104.178 lb Max Load, 63.561 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GDMS4020PH PR1225, Solid Carbide Megacoat, Neutral, 4 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Screw Machine Length Drill Bit: 0.0984″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.5512″ Dia, 1.6535″ LOC, 5 Flute, 0.0157″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.52 mm OAL, AlTiN Coated, Centercutting
• Compression Spring: 1.293″ OD, 1.875″ Free Length 0.225″ Wire Dia, 283.564 lb Max Load, 711.629 lb/in Spring Rate, Music Wire
• TNMG432 TN60 Cermet Turning Insert TiCN/NbC Finish, Neutral, 0.866″ Long, 1/2″ Inscribed Circle, 1/32″ Corner Radius, 60° Triangle
• Ball End Mill: 0.7087″ Dia, 1.2598″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Compression Spring: 1.351″ OD, 2.5″ Free Length 0.192″ Wire Dia, 177.359 lb Max Load, 212.463 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 4 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Compression Spring: 1.586″ OD, 4.75″ Free Length 0.148″ Wire Dia, 74.533 lb Max Load, 27.394 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 2.87 mm OAL, AlTiN Coated
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 1.586″ OD, 3.75″ Free Length 0.162″ Wire Dia, 95.765 lb Max Load, 49.098 lb/in Spring Rate, Music Wire
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Jobber Length Drill Bit: 0.266″ Dia, 130 °, Cobalt TiN Finish, 4.2913″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 657
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Grooving Insert: GMM3020040MW KW10, Solid Carbide Co & WC Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, 2B/3B, High Speed Steel, TiN Finish 1-21/32″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series 760