Products

• Turning Insert: DCGT21.51FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Ball End Mill: 0.25″ Dia, 0.5″ LOC, 2 Flute, Solid Carbide 2-1/4″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: DCGT21.51FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 2 Flute, 0.0031″ Chamfer Width, Solid Carbide 2.52 mm OAL, ZrN Coated, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: DCGT32.51FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Turning Insert: DCGT21.5.5FNA4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Duct Tape: 1″ Wide, 6.3 mil Thick, Lead Foil Rubber Adhesive, 15 lb/in Tensile Strength
• Corner Radius End Mill: 0.156″ Dia, 0.235″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 2 Flute, 0.0024″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Turning Insert: DCGT32.5.5FNA4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Corner Chamfer End Mill: 0.1575″ Dia, 0.4331″ LOC, 2 Flute, 0.0016″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Turning Insert: DCGT21.52FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Corner Radius End Mill: 0.1562″ Dia, 9/16″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.1875″ Dia, 0.5″ LOC, 2 Flute, Solid Carbide 2-1/4″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Chamfer Mill: 3 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Screw Machine Length Drill Bit: 0.113″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 2463
• Ball End Mill: 0.7874″ Dia, 1.4961″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Corner Radius End Mill: 0.1562″ Dia, 0.235″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 0.1969″ Dia, 0.5118″ LOC, 2 Flute, 0.002″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Chamfer End Mill: 0.1969″ Dia, 0.5118″ LOC, 2 Flute, 0.0197″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Corner Chamfer End Mill: 0.187″ Dia, 0.57″ LOC, 4 Flute, 0.02″ Chamfer Width, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated
• Ball End Mill: 0.031″ Dia, 0.046″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 4657
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 2 Flute, 0.0008″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.187″ Dia, 0.57″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated
• Ball End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Compression Spring: 0.881″ OD, 8.5″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 4.801 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Compression Spring: 0.999″ OD, 3″ Free Length 0.177″ Wire Dia, 185.703 lb Max Load, 252.497 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.166″ Dia, 135 °, Cobalt Coated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 2175A
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Aluminum; Material: Aluminum; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Compression Spring: 1.41″ OD, 3.5″ Free Length 0.162″ Wire Dia, 106.934 lb Max Load, 65.592 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.3125″ Dia, 0.75″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, AlTiN Coated
• Compression Spring: 1.586″ OD, 3.5″ Free Length 0.162″ Wire Dia, 95.765 lb Max Load, 52.963 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.4724″ Dia, 1.0236″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Spiral Point Tap: M8 x 1, Metric, 3 Flutes, Plug, VC-10 Finish 15 mm Thread Length, 90 mm OAL, Right Hand, D5, Series 350
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 2 Flute, 0.0031″ Chamfer Width, Solid Carbide 2.52 mm OAL, Bright/Uncoated, Centercutting
• Spiral Point Tap: M8 x 1.25, Metric, 3 Flutes, Plug, VC-10 Finish 15 mm Thread Length, 90 mm OAL, Right Hand, D5, Series 350
• Ball End Mill: 0.125″ Dia, 0.25″ LOC, 2 Flute, Solid Carbide 2-1/4″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Ball End Mill: 0.5512″ Dia, 1.0236″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Boring Bar: 0.32″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL
• Corner Chamfer End Mill: 0.1575″ Dia, 0.4331″ LOC, 2 Flute, 0.0016″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Boring Bar: 0.32″ Min Bore, 0.6″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL
• Ball End Mill: 0.0938″ Dia, 0.2813″ LOC, 2 Flute, Solid Carbide 2-1/4″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Boring Bar: 0.32″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 2 Flute, 0.0024″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Boring Bar: 0.32″ Min Bore, 1.1″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.36″ Min Bore, 0.6″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL
• Ball End Mill: 0.375″ Dia, 0.875″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Boring Bar: 0.36″ Min Bore, 1.8″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL
• Boring Bar: 0.36″ Min Bore, 1-1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL
• Ball End Mill: 0.0787″ Dia, 0.2756″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Ball End Mill: 0.6299″ Dia, 1.2598″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Compression Spring: 1.469″ OD, 2.25″ Free Length 0.192″ Wire Dia, 164.335 lb Max Load, 200.132 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 0.7874″ Dia, 1.4961″ LOC, 2 Flute, 0.0079″ Chamfer Width, Solid Carbide 4.13 mm OAL, Bright/Uncoated, Centercutting
• Turning Insert: CCMT432PS AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Compression Spring: 1.528″ OD, 2.75″ Free Length 0.177″ Wire Dia, 126.675 lb Max Load, 104.468 lb/in Spring Rate, Music Wire
• Turning Insert: CCMT432PM AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Ball End Mill: 0.5″ Dia, 1″ LOC, 2 Flute, Solid Carbide 3-1/4″ OAL, 1/2″ Shank Dia, AlTiN Coated
• Compression Spring: 1.704″ OD, 3.5″ Free Length 0.162″ Wire Dia, 89.479 lb Max Load, 46.919 lb/in Spring Rate, Music Wire
• Square End Mill: 0.0156'' Dia, 0.023'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiCN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Compression Spring: 1.704″ OD, 6″ Free Length 0.135″ Wire Dia, 53.891 lb Max Load, 13.977 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 0.0787″ Dia, 0.2756″ LOC, 2 Flute, 0.0008″ Chamfer Width, Solid Carbide 2.28 mm OAL, ZrN Coated, Centercutting
• Compression Spring: 1.586″ OD, 9.5″ Free Length 0.148″ Wire Dia, 74.533 lb Max Load, 13.473 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.375″ Free Length 0.25″ Wire Dia, 251.765 lb Max Load, 685.541 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TDTT K10, Solid Carbide Uncoated, Neutral, 0.157″ Cutting Width, Series TDT-E
• Compression Spring: 1.586″ OD, 7.5″ Free Length 0.162″ Wire Dia, 95.765 lb Max Load, 23.982 lb/in Spring Rate, Music Wire
• Compression Spring: 2.35″ OD, 4″ Free Length 0.192″ Wire Dia, 76.638 lb Max Load, 38.858 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.0591″ Dia, 0.1772″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 42 ° Helix, TiB2 Coated, Single End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 15.58; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Threaded End; Compressed Length: 9.58; Extensi
• Chamfer Mill: 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, AlTiN Coated
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 15.58; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Threaded End; Compressed Length: 9.58; Extensi
• Corner Radius End Mill: 3/8″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.233″ OD, 5.75″ Free Length 160.326 lb Max Load, 74.79 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, TiB2 Coated
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.015″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM6F-NB
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.015″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM6F
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM6F-NB
• Compression Spring: 2.233″ OD, 6.25″ Free Length 0.207″ Wire Dia, 98.081 lb Max Load, 33.758 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.1285″ Dia, 130 °, Cobalt TiN Finish, 2.5591″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 657
• Spray Adhesives; Form: Liquid; Gas; Container Type: Aerosol Can; Working Time: 15; Color: Translucent; Series: AC50SP; Flammability: Yes; Bonding Strength: High Strength; Coverage: 100; Heat Resistance: 70; Standards: National VOC Compliant. VOC content l
• Kyocera VNMM 332MSE KPD010 Grade PCD, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (N) Non-Ferrous Metals, (S) Titanium Alloy
• Top Plate Casters; Mount Type: Plate; Number of Wheels: 1.000; Wheel Diameter (Inch): 4; Wheel Material: Rubber; Wheel Width (Inch): 1-1/4; Wheel Color: Gray
• High Temperature Masking Tape: 4″ Wide, 60 yd Long, 7.2 mil Thick, Tan Crepe Paper, Natural Synthetic Rubber Adhesive, 28 lb/in Tensile Strength
• Top Plate Casters; Mount Type: Plate; Number of Wheels: 1.000; Wheel Diameter (Inch): 4; Wheel Material: Rubber; Wheel Width (Inch): 1-1/4; Wheel Color: Gray
• Kyocera DNMM 432MSE KPD010 Grade PCD, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (N) Non-Ferrous Metals, (S) Titanium Alloy
• Compression Spring: 0.881″ OD, 4.25″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 9.703 lb/in Spring Rate, Stainless Steel
• Kyocera VNMM 331MSE KPD010 Grade PCD, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (N) Non-Ferrous Metals, (S) Titanium Alloy
• Compression Spring: 0.881″ OD, 2.75″ Free Length 0.098″ Wire Dia, 32.259 lb Max Load, 25.816 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 3.5″ Free Length 0.092″ Wire Dia, 24.145 lb Max Load, 12.862 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 5.5″ Free Length 0.135″ Wire Dia, 67.237 lb Max Load, 21.979 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.2188″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Press Fit Headless Drill Bushing: P, 1″ OD 1″ OAL, Carbon Steel
• Grooving Insert: GCM4002GF AC830P, Solid Carbide Super FF Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Press Fit Headless Drill Bushing: P, 1″ OD 1″ OAL, Carbon Steel
• Chucking Reamer: 0.0435″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Square End Mill: 0.438'' Dia, 1'' LOC, 7/16'' Shank Dia, 2-3/4'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 38 ° Variable Helix, Centercutting, RH Cut, RH Flute, Series CoroMill Dura
• Press Fit Headless Drill Bushing: P, 37/64″ ID, 1″ OD 1″ OAL, Carbon Steel
• Grooving Insert: GCM4020RN AC830P, Solid Carbide Super FF Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Kyocera WNMM 432MSE KPD010 Grade PCD, 0 Degree, Trigon, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (N) Non-Ferrous Metals, (S) Titanium Alloy
• Grooving Insert: GCM4002CG AC830P, Solid Carbide Super FF Finish, Left Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1464; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Insert: GCM4002GF AC520U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 37 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 1035
• Grooving Insert: GCM4002GG AC520U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Chucking Reamer: 0.0585″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Grooving Insert: GCM4004ML AC520U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4004GG AC520U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002CG AC520U, Solid Carbide Super ZX Finish, Right Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Corner Radius End Mill: 0.015″ Dia, 0.023″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Grooving Insert: GCM4002CG AC520U, Solid Carbide Super ZX Finish, Left Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Jobber Length Drill Bit: 0.2969″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 5/16'' Dia, 15/32'' LOC, 5/16'' Shank Dia, 2'' OAL, 6 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 37 ° Helix, RH Cut, RH Flute, Series VGM6
• Chucking Reamer: 0.0555″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Ball End Mill: 0.0469″ Dia, 0.0938″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Chucking Reamer: 0.2362″ Dia, 4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Grooving Insert: GCM4020RN AC520U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Series EP-220 Gear Oil: 55 gal Drum, ISO 220
• Grooving Insert: GCM4020RN AC425K, Solid Carbide Super FF Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.0313″ Dia, 0.0625″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• UHMW Film Tape: 3″ Wide, 5 yd Long, 5 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Jobber Length Drill Bit: 0.1015″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: GCM4002GF AC530U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.062″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 4 Teeth, Solid Carbide, ANSI 202, Old Standard 201
• Screw Machine Length Drill Bit: 0.089″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: GCM4020RN AC530U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.125″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 4 Teeth, Solid Carbide
• Grooving Insert: GCM4008MG AC520U, Solid Carbide Super ZX Finish, Neutral, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM4002CG AC830P, Solid Carbide Super FF Finish, Right Hand, 4 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GMG3020020MS PR915, Solid Carbide TiAlN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Compression Spring: 0.823″ OD, 1.375″ Free Length 0.135″ Wire Dia, 80.273 lb Max Load, 253.81 lb/in Spring Rate, Stainless Steel
• Rigid Top Plate Caster: Rubber, 2-1/2″ Wheel Dia, 1-1/16″ Wheel Width, 176 lb Capacity, 3-1/4″ OAH 2.1875″ Plate Length, 4.44″ Plate Width, No Brake
• Compression Spring: 0.999″ OD, 2.625″ Free Length 0.192″ Wire Dia, 193.288 lb Max Load, 439.618 lb/in Spring Rate, Music Wire
• 5/16″ Head Diam, 1/4″ Shank Diam, 6 Flute 60° High Speed Steel Countersink Bright Finish, 1-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Spiral Flute Tap: #6-40, UNF, 3 Flute, Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 2.205″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU51C400
• Compression Spring: 1.351″ OD, 3.5″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 71.261 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 12.05; Load Capacity: 30 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Metal Ball Socket; Compressed Length: 8.55; Extension For
• Compression Spring: 1.41″ OD, 9″ Free Length 0.148″ Wire Dia, 83.302 lb Max Load, 17.39 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 12.05; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Metal Ball Socket; Compressed Length: 8.55; Extension For
• 12 Inch Leg, Steel, Bright Finish, Outside Caliper
• Compression Spring: 1.41″ OD, 2.25″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 218.805 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 12.05; Load Capacity: 120 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Metal Ball Socket; Compressed Length: 8.55; Extension Fo
• Compression Spring: 1.528″ OD, 5.75″ Free Length 0.135″ Wire Dia, 59.818 lb Max Load, 17.194 lb/in Spring Rate, Music Wire
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 12.05; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Metal Ball Socket; Compressed Length: 8.55; Extension For
• Ball End Mill: 0.031″ Dia, 0.046″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 12.05; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.32; Tube Diameter: 0.750; End Fitting Connection: Metal Ball Socket; Compressed Length: 8.55; Extension For
• Jobber Length Drill Bit: 0.2047″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Kyocera WNMU 080608ENSM PR1510 Grade PVD Carbide, Trigon, Negative Rake Angle, Neutral Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron
• Double Angle Milling Cutter: 90 °, 3/16″ Cut Dia, 0.105″ Cut Width, 3/16″ Shank Dia, Solid Carbide 2″ OAL, Uncoated, 4 Teeth
• Kyocera WNMU 080608ENGH PR015S Grade PVD Carbide, Trigon, Negative Rake Angle, Neutral Milling Insert for Roughing in (H) Hardened Materials
• Jobber Length Drill Bit: 0.2091″ Dia, 130 °, Powdered Metal FIREX Finish, 3.66″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Boring Bar: 0.23″ Min Bore, 0.8″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• All-Purpose & Utility Hooks; Overall Length (Inch): 2-21/64; Overall Length (mm): 59.0000; Finish/Coating: Satin; Maximum Load Capacity: 22.00; Width (Inch): 1-45/64; Additional Information: Projection: 18 mm; Minimum Order Quantity: 304 Stainless Steel;
• Damping Stays; Type: Lid Stay without Catch; Overall Length (mm): 213.5000; Thickness (mm): 1.2; Width (mm): 27.50; Side: Right Hand; Maximum Opening: 90.000; Finish/Coating: Satin; Mounting Hole Size Diameter: 3.800; Material: 304 Stainless Steel; Maximu
• Boring Bar: 0.29″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• White Double-Sided Foam Tape: 1″ Wide, 125 mil Thick, Permanent Rubber-Based Adhesive
• Damping Stays; Type: Lid Stay without Catch; Overall Length (mm): 213.5000; Thickness (mm): 1.2; Width (mm): 27.50; Side: Left Hand; Maximum Opening: 90.000; Finish/Coating: Satin; Mounting Hole Size Diameter: 3.800; Material: 304 Stainless Steel; Maximum
• Corner Radius End Mill: 0.1181″ Dia, 0.1772″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.056″ OD, 3.75″ Free Length 0.162″ Wire Dia, 74.789 lb Max Load, 32.573 lb/in Spring Rate, Music Wire
• White Double-Sided Polyethylene Foam Tape: 1″ Wide, 5 yd Long, 62 mil Thick, Rubber Adhesive
• Compression Spring: 1.998″ OD, 3.75″ Free Length 0.162″ Wire Dia, 76.872 lb Max Load, 33.962 lb/in Spring Rate, Music Wire
• O-Ring: 35.5 mm ID x 40.8 mm OD, 2.65 mm Thick, Nitrile Butadiene Rubber Round Cross Section
• Compression Spring: 1.41″ OD, 4.5″ Free Length 0.148″ Wire Dia, 83.302 lb Max Load, 35.392 lb/in Spring Rate, Music Wire
• Compression Spring: 1.41″ OD, 2″ Free Length 0.207″ Wire Dia, 209.56 lb Max Load, 353.309 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 6″ Free Length 0.135″ Wire Dia, 59.818 lb Max Load, 16.443 lb/in Spring Rate, Music Wire
• Drawer Slides; Type: Mini Drawer Slide; Extension Style: Full; Slide Length: 80.00; Travel Length: 97.00; Load Capacity (Lb.): 22.000; Width (Inch): 3/8; Slide Length: 80.00; Material: Stainless Steel; Material Grade: 304; Material: Stainless Steel
• Compression Spring: 1.41″ OD, 6.25″ Free Length 242.777 lb Max Load, 198.186 lb/in Spring Rate, Stainless Steel
• O-Ring: 4-3/4″ ID x 5″ OD, 1/8″ Thick, Dash 248, HNBR Round Cross Section
• O-Ring: 3″ ID x 3-3/8″ OD, 3/16″ Thick, Dash 337, HNBR Round Cross Section
• O-Ring: 5-3/4″ ID x 6-1/8″ OD, 3/16″ Thick, Dash 359, HNBR Round Cross Section
• Ball End Mill: 0.1563″ Dia, 0.3125″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chucking Reamer: 27/64″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Ball End Mill: 0.0781″ Dia, 0.125″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Point Tap: #2-64, UNF, 2 Flutes, Plug, 3B, GLT-1 Finish 0.276″ Thread Length, 1.7717″ OAL, Right Hand, H2, Series BU20C310
• Compression Spring: 2.35″ OD, 8.5″ Free Length 0.225″ Wire Dia, 116.218 lb Max Load, 31.071 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.025″ Dia, 0.075″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.0781″ Dia, 0.125″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1246; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 0.02″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• 8.3mm Head Diam, 5/16″ Shank Diam, 90° Cobalt Countersink 3-3/8″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 2.115″ OD, 3.75″ Free Length 168.648 lb Max Load, 134.318 lb/in Spring Rate, Stainless Steel
• LNEX080416PNERL ACK300 Carbide Milling Insert TiAlN/AlCrN Finish, 8.05mm Thick x 8.6mm Wide
• Compression Spring: 1.469″ OD, 7.5″ Free Length 0.225″ Wire Dia, 179.415 lb Max Load, 89.899 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 6″ Free Length 0.207″ Wire Dia, 144.862 lb Max Load, 79.299 lb/in Spring Rate, Stainless Steel
• LNEX080412PNELL ACK300 Carbide Milling Insert TiAlN/AlCrN Finish, 8.05mm Thick x 8.6mm Wide
• LNEX080416PNELL ACK300 Carbide Milling Insert TiAlN/AlCrN Finish, 8.05mm Thick x 8.6mm Wide
• Ball End Mill: 0.045″ Dia, 0.068″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• LNEX080408PNELL ACK300 Carbide Milling Insert TiAlN/AlCrN Finish, 8.05mm Thick x 8.6mm Wide
• Electromagnet Lock Accessories; Type: Wire Harness; For Use With: McKinney QC Concealed Circuit Electric Hinges; Material: Plastic; Material: Plastic; For Use With: McKinney QC Concealed Circuit Electric Hinges; Type: Wire Harness; Accessory Type: Wire Ha
• Spiral Point Tap: M5 x 0.8, Metric, 3 Flutes, Plug, 6H, HSS-E, Hardlube Finish 1.024″ Thread Length, 2.7559″ OAL, Right Hand
• Ball End Mill: 0.0236″ Dia, 0.0354″ LOC, 2 Flute, Solid Carbide 37.5 mm OAL, 3 mm Shank Dia, 20 ° Helix, nACRo Coated, Single End
• LNEX080408PNELG ACM300 Carbide Milling Insert TiAlN/AlCrN Finish, 8.05mm Thick x 8.6mm Wide
• Compression Spring: 0.881″ OD, 6.5″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 31.466 lb/in Spring Rate, Music Wire
• LNEX080404PNELG ACP200 Carbide Milling Insert TiAlN/AlCrN Finish, 8.05mm Thick x 8.6mm Wide
• Ball End Mill: 0.0469″ Dia, 0.071″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Compression Spring: 1.88″ OD, 2.875″ Free Length 0.177″ Wire Dia, 104.224 lb Max Load, 68.695 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.045″ Dia, 0.068″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Compression Spring: 1.41″ OD, 2.875″ Free Length 0.177″ Wire Dia, 136.472 lb Max Load, 116.533 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 3.25″ Free Length 0.207″ Wire Dia, 139.769 lb Max Load, 142.956 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.2095″ Dia, 5″ OAL, 1-1/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Ball End Mill: 0.09″ Dia, 0.125″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Chucking Reamer: 0.2325″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Spiral Point Tap: M5 x 0.8, Metric, 2 Flutes, Plug, 6H, Powdered Metal High Speed Steel, Uncoated 14 mm Thread Length, 70 mm OAL, Right Hand, Series CoroTap 200
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Spiral Point Tap: M5 x 0.8, Metric, 2 Flutes, Plug, 6H, High Speed Steel, Uncoated 13 mm Thread Length, 70 mm OAL, Right Hand, Series CoroTap 200
• Jobber Length Drill Bit: 0.2677″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Ball End Mill: 0.09″ Dia, 0.125″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Ball End Mill: 0.375″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Boring Bar: 0.152″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.002″ Corner Radius
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bar: 0.152″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.002″ Corner Radius
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: LNUX 19 19 40-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1575″ Corner Radius, N/A Series LNUX-PF
• Turning Insert: LNMX 19 19 40-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1575″ Corner Radius, N/A Series LNMX-PM
• Boring Bar: 0.152″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.002″ Corner Radius
• Masking Tape: 1″ Wide, 83.33 yd Long, 4 mil Thick, Yellow Polyvinylchloride Film, 0.48 lb/in Tensile Strength
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: LNUX 19 19 40-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1575″ Corner Radius, N/A Series LNUX-PM
• Kyocera DCGT 32505MFPSK PR1535 Grade PVD Carbide, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing-Medium in (S) Heat-Resistant Alloy, (S) Titanium Alloy, (M) Stainless Steel
• Boring Bar: 0.132″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• Milling Insert: KDMB0500M0ERGP, KCPK10, Cast Iron & Steel N/A Finish, 0.5000″ OAW
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.999″ OD, 2.75″ Free Length 0.192″ Wire Dia, 193.667 lb Max Load, 416.393 lb/in Spring Rate, Music Wire
• Boring Bar: 0.152″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• Compression Spring: 1.351″ OD, 9″ Free Length 0.207″ Wire Dia, 156.182 lb Max Load, 62.899 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.821″ OD, 8″ Free Length 0.162″ Wire Dia, 84.002 lb Max Load, 17.827 lb/in Spring Rate, Music Wire
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Compression Spring: 1.469″ OD, 7.5″ Free Length 50.145 lb Max Load, 10.63 lb/in Spring Rate, Music Wire
• Boring Bar: 0.152″ Min Bore, 3/8″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert
• Boring Bar: 0.152″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.004″ Corner Radius
• Spiral Flute Tap: #12-28, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 3.15″ OAL, Right Hand Flute, Right Hand Thread, H4, Series BU50C300
• Spiral Flute Tap: M2 x 0.40, M, Modified Bottoming, 6G Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5, Series B0503020