Products

• Compression Spring: 1.469″ OD, 7″ Free Length 0.192″ Wire Dia, 119.234 lb Max Load, 49.083 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 5/16″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Corner Radius End Mill Head: 5/16″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• 1″ Head Diam, 1/2″ Shank Diam, 1 Flute 120° High Speed Steel Countersink 2-3/4″ OAL, Straight Shank
• Corner Radius End Mill: 0.02″ Dia, 0.06″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• 1″ Head Diam, 1/2″ Shank Diam, 1 Flute 60° High Speed Steel Countersink 2-3/4″ OAL, Straight Shank
• Corner Radius End Mill: 0.1575″ Dia, 0.315″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• 1″ Head Diam, 1/2″ Shank Diam, 3 Flute 82° High Speed Steel Countersink 2-3/4″ OAL
• Corner Radius End Mill: 3 Flutes, Solid Carbide 39, 40 & 41 ° Helix, Carbo Coated, Corner Chamfer End, Centercutting, Series 6978
• Corner Radius End Mill: 0.21″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 35 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 0.206″ Dia, 0.118″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 35 ° Helix, TiB2 Coated, Corner Radius End
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• 7/8″ Head Diam, 1/2″ Shank Diam, 4 Flute 82° High Speed Steel Countersink Oxide Finish, 2-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.09″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2010
• 3/4″ Head Diam, 1/2″ Shank Diam, 1 Flute 82° High Speed Steel Countersink 2-5/8″ OAL
• Straight Flutes Tap: Metric, 3 Flutes, Semi-Bottoming, 6H, Powdered Metal High Speed Steel, Bright/Uncoated Right Hand, Series CoroTap 100
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Compression Spring: 2.056″ OD, 3.5″ Free Length 0.162″ Wire Dia, 74.789 lb Max Load, 35.137 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Compression Spring: 0.823″ OD, 3.75″ Free Length 0.162″ Wire Dia, 145.922 lb Max Load, 221.364 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8709; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 0.999″ OD, 8″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 12.728 lb/in Spring Rate, Music Wire
• Turning Insert: DNGA432SN011EL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Compression Spring: 1.351″ OD, 1.875″ Free Length 0.207″ Wire Dia, 217.732 lb Max Load, 425.094 lb/in Spring Rate, Music Wire
• SNMG644EEM AC8015P Carbide Turning Insert Absotech Finish, 0.75″ Long, 3/4″ Inscribed Circle, 0.063″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Compression Spring: 1.645″ OD, 5.75″ Free Length 0.135″ Wire Dia, 55.744 lb Max Load, 15.384 lb/in Spring Rate, Music Wire
• Turning Insert: DNGA441SN011DL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Square End Mill: 3/64'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: DNGA442SN014FL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Square End Mill: 0.2362'' Dia, 0.7087'' LOC, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mill:
• Turning Insert: CNGA431SN009CL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• SNMG644EEG AC8015P Carbide Turning Insert Absotech Finish, 0.75″ Long, 3/4″ Inscribed Circle, 0.063″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Corner Radius End Mill: 1/16″ Dia, 0.186″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Turning Insert: CNGA433SN009BL2, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• SNMG646EME AC8015P Carbide Turning Insert Absotech Finish, 0.75″ Long, 3/4″ Inscribed Circle, 0.0945″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Turning Insert: DNGA442SN011EL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Square End Mill: 0.021'' Dia, 1/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.023'' Dia, 0.035'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: CNGA431SN018FL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• SNMG643EEM AC8025P Carbide Turning Insert Absotech Finish, 0.75″ Long, 3/4″ Inscribed Circle, 0.0472″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Corner Radius End Mill: 0.315″ Dia, 0.8661″ LOC, 3 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: CNGA432SN009DL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA433SN009DL2, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• SNMG644EEM AC8025P Carbide Turning Insert Absotech Finish, 0.75″ Long, 3/4″ Inscribed Circle, 0.063″ Corner Radius, 1/4″ Thick, 90° Included Angle, Series AC8000P
• Turning Insert: DNGA442SN014FL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Turning Insert: DNGA441SN014FL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• 1/2″ Head Diam, 1/4″ Shank Diam, 1 Flute 90° Cobalt Countersink Uncoated, 2″ OAL, Single End, Straight Shank, Right Hand Cut
• Turning Insert: CNGA431SN013EL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• O-Ring: 5-5/8″ ID x 6″ OD, 3/16″ Thick, Dash 358, HNBR Round Cross Section
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 8.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Deci
• Turning Insert: CNGA433SN013EL2, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA432SN014FL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA431SN011DL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA432SN009DL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA433SN009DL2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Chucking Reamer: 27/64″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, Cobalt 6 Flute
• Duct Tape: 2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Milling Insert: CPMT 09T308SN CTPP235, CTPP235, Solid Carbide N/A Finish,
• Turning Insert: DNGA441SN009BL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Chucking Reamer: 7/16″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, Cobalt 6 Flute
• Milling Insert: SDNT 09T308ER-M31 CTC5240, CTC5240, Solid Carbide N/A Finish,
• Turning Insert: DNGA442SN009CL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Compression Spring: 1.586″ OD, 2.625″ Free Length 0.177″ Wire Dia, 122.347 lb Max Load, 102.692 lb/in Spring Rate, Music Wire
• Corner Radius End Mill Head: 1/2″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Turning Insert: CNGA431SN014FL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Dolly: Plastic Top
• Turning Insert: CNGA433SN011EL2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA432FN_L3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• TCMT16T304HQ CA5525 Carbide Turning Insert TiCl2O3/TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 5/32″ Thick, 60° Triangle, Series CA55
• Turning Insert: CNGA432SN016EL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA431SN014DL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Compression Spring: 0.823″ OD, 5.25″ Free Length 0.135″ Wire Dia, 105.909 lb Max Load, 64.765 lb/in Spring Rate, Music Wire
• Corner Radius End Mill Head: 1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Turning Insert: DNGA432SN011DL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Compression Spring: 0.881″ OD, 2.25″ Free Length 0.105″ Wire Dia, 38.834 lb Max Load, 41.873 lb/in Spring Rate, Stainless Steel
• Turning Insert: CNGA432SN011CL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Jobber Length Drill Bit: 0.397″ Dia, 135 °, High Speed Steel Bright/Uncoated, 5.125″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 1.351″ OD, 6.75″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 13.493 lb/in Spring Rate, Music Wire
• Turning Insert: DNGA441SN014GL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Corner Radius End Mill: 0.2362″ Dia, 0.6299″ LOC, 5 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Polyester Film Tape: 1/4″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Turning Insert: DNGA442SN011DL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, nACRo Coated, Corner Radius End, Centercutting, Series SM3F
• Polyester Film Tape: 1/4″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Turning Insert: CNGA431TN009CL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA433SN014DL2, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Polytetrafluroethylene Film Tape: 1/2″ Wide, 5 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Corner Radius End Mill: 3/16″ Dia, 15/64″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Turning Insert: CNGA433SN011CL2, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: CNGA432SN009CL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: DNGA432TN011EL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Turning Insert: DNGA431SN011DL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Turning Insert: DNGA441FN_L3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Turning Insert: CNGA431FN_L3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.25 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Turning Insert: DNGA431SN009DL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Turning Insert: DNGA432FN_L3 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Turning Insert: CNGA433TN011EL2, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 1.45 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• 3/8″ Head Diam, 1/4″ Shank Diam, 4 Flute 100° Solid Carbide Countersink 2-1/4″ OAL, Straight Shank
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Left Hand, 2.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Right Hand, 2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0244MC
• Square End Mill: 1/32'' Dia, 0.046'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GC10 PR1725, Solid Carbide Megacoat Nano Finish, Right Hand, 3 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• CCMT431SM IC907 Carbide Turning Insert TiN/TiAlN Finish, 12.9mm Long, 1/2″ Inscribed Circle, 1/64″ Corner Radius, 80° Diamond, Series Isoturn
• Compression Spring: 2.409″ OD, 5.75″ Free Length 149.309 lb Max Load, 64.985 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 2.25″ Free Length 0.192″ Wire Dia, 177.359 lb Max Load, 240.928 lb/in Spring Rate, Music Wire
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 1.2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Corner Chamfer End Mill: 0.375″ Dia, 1.125″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 1.25 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Corner Chamfer End Mill: 0.375″ Dia, 1.125″ LOC, 4 Flute, 0.01″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated
• Compression Spring: 1.939″ OD, 3.5″ Free Length 0.162″ Wire Dia, 79.111 lb Max Load, 38.305 lb/in Spring Rate, Music Wire
• White Double-Sided Polyethylene Foam Tape: 1″ Wide, 1 yd Long, 62 mil Thick, Rubber Adhesive
• Square End Mill: 5/64'' Dia, 0.475'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 1.45 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Open End Wrench: Single End Head, 27 mm 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Square End Mill: 1/16'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 1.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Ball End Mill: 0.06″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Square End Mill: 3/32'' Dia, 0.585'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.06″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 2.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Square End Mill: 0.011'' Dia, 1/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Right Hand, 3 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Square End Mill: 0.1'' Dia, 1/2'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Milling Insert: XDKT 200708ER-F40 CTCS245, CTCS245, Solid Carbide N/A Finish,
• Square End Mill: 0.012'' Dia, 0.018'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 1 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Milling Insert: XDKT 200740ER-F40 CTC5240, CTC5240, Solid Carbide N/A Finish,
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 1.25 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Ball End Mill: 0.071″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Turning Insert: 2QP-DNGA433 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Turning Insert: 2QP-DNGA432 BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 1.45 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 2 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Turning Insert: 2QP-VNGA332 BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Grooving Insert: GC10 PR1535, Solid Carbide Megacoat Nano Finish, Left Hand, 2.5 mm Cutting Width, 2.2 mm Max Depth, Series SIGC
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 45 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Turning Insert: 2QP-VNGA331 BXA10, Polycrystalline Cubic Boron Nitride TiAlN & TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Corner Radius End Mill: 1/4″ Dia, 1″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 45 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Square End Mill: 0.315'' Dia, 0.5512'' LOC, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: 2QP-GNGA433 BXA20, Polycrystalline Cubic Boron Nitride Coated Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 70.0 &deg N/A Diamond, Series GNGA
• Ball End Mill: 0.25″ Dia, 1″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Screw Machine Length Drill Bit: 0.4213″ Dia, 130 °, Powdered Metal V Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1900
• Ball End Mill: 0.1″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 1.351″ OD, 5.75″ Free Length 0.162″ Wire Dia, 82.615 lb Max Load, 36.271 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.4331″ Dia, 130 °, XPM Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1900
• Compression Spring: 2.644″ OD, 9.5″ Free Length 196.818 lb Max Load, 38.156 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• 3/8″ Head Diam, 1/4″ Shank Diam, 4 Flute 60° Solid Carbide Countersink 2-1/4″ OAL, Straight Shank
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Series TC5F
• Boring Bar: 3 mm Min Bore, 12 mm Max Depth, Right Hand Cut, Carbide 3 mm Shank Dia, 37.70 mm OAL, 0.08 mm Corner Radius
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Series TC5F
• Square End Mill: 0.064'' Dia, 0.192'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.098'' Dia, 0.147'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.094'' Dia, 0.141'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.123'' Dia, 0.369'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.121'' Dia, 0.363'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.124'' Dia, 0.372'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.118'' Dia, 0.177'' LOC, 1/8'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.122'' Dia, 0.366'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Semi-Bottoming, 6H + 0.1 Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D11 & D12, Series 4627
• Double Angle Milling Cutter: 90 °, 3/16″ Cut Dia, 0.105″ Cut Width, 3/16″ Shank Dia, Solid Carbide 2-1/2″ OAL, Uncoated, 4 Teeth
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated
• Straight Flutes Tap: Metric, 5 Flutes, Modified Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Square End Mill: 3/32'' Dia, 0.282'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Duct Tape: 1/2″ Wide, 5 mil Thick, Aluminum Foil Acrylic Adhesive, 20 lb/in Tensile Strength
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Square End Mill: 0.071'' Dia, 0.213'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Polytetrafluroethylene Film Tape: 1-1/2″ Wide, 5 yd Long, 10 mil Thick 60 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Square End Mill: 0.2188'' Dia, 7/16'' LOC, 1/4'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, TiCN Finish, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Combo Drill & Countersink: Metric, High Speed Steel TiN Finish, Right Hand Cut, Series 613
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 0.098'' Dia, 0.294'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.293″ OD, 5.25″ Free Length 0.225″ Wire Dia, 200.667 lb Max Load, 183.709 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Screw Machine Length Drill Bit: 0.2717″ Dia, 120 °, High Speed Steel Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1100
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• 142° 5mm Diam 62mm OAL Solid Carbide Spotting Drill Bright/Uncoated, 14mm Flute Length, 5mm Shank Diam, RH Cut, Series 546
• Grooving Insert: TDTT TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.236″ Cutting Width, Series TDT-E (Full Radius)
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: TDITT TT7220, Solid Carbide TiCN Finish, Neutral, 0.236″ Cutting Width, Series TDIT-E (Full Radius)
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.039″ Dia, 0.117″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.3125″ Dia, 2 Flute, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 45 ° Helix, Uncoated, Single End, Series 2015
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Corner Radius End Mill: 0.039″ Dia, 0.117″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 4.5mm LOC, 1.5mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• Corner Radius End Mill: 0.039″ Dia, 0.117″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.005″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Square End Mill: 3mm LOC, 1mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6480
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Point Tap: M12 x 1.75, Metric Coarse, 4 Flutes, Plug, 6H, Powdered Metal, TiCN Finish 1″ Thread Length, 3-3/8″ OAL, Right Hand, D3, Series 714
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Left Hand Cut, Series 584
• Swivel Top Plate Caster: Elastic Rubber, 4-15/16″ Wheel Dia, 1-9/16″ Wheel Width, 220 lb Capacity, 6-1/8″ OAH 3.125″ Plate Length, 4.13″ Plate Width, No Brake
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.293″ OD, 9″ Free Length 0.207″ Wire Dia, 162.378 lb Max Load, 70.172 lb/in Spring Rate, Stainless Steel
• White Double-Sided Urethane Foam Tape: 3/4″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• Milling Insert: KDMB16M0ERGN, KCPK10, Cast Iron & Steel N/A Finish, 0.6300″ OAW
• Impact Socket: 1″ Drive 6-Point
• Impact Socket: 1″ Drive 6-Point
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 591
• Ball End Mill: 0.0472″ Dia, 0.0709″ LOC, 2 Flute, Solid Carbide 37.5 mm OAL, 3 mm Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.22 mm Cutting Width, 3 mm Max Depth
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.125″ Dia, 0.187″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Compression Spring: 2.409″ OD, 5″ Free Length 0.225″ Wire Dia, 113.515 lb Max Load, 51.274 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.42 mm Cutting Width, 3 mm Max Depth
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.025″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Left Hand Cut, Series 586
• Spiral Flute Tap: M4 x 0.70, DIN 371, 3 Flute, Semi-Bottoming, 6HX Class of Fit, High Speed Steel-E-PM, TiAlN Finish Right Hand Flute, Right Hand Thread, Series T300
• Compression Spring: 1.586″ OD, 4″ Free Length 219.119 lb Max Load, 238.453 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 1.97 mm Cutting Width, 4 mm Max Depth
• Corner Chamfer End Mill: 0.187″ Dia, 0.57″ LOC, 4 Flute, 0.01″ Chamfer Width, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Radius End Mill Head: 1/8″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 2.27 mm Cutting Width, 5 mm Max Depth
• Corner Radius End Mill: 0.0079″ Dia, 0.0118″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill Head: 1/8″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 4.27 mm Cutting Width, 5 mm Max Depth
• Ball End Mill: 0.012″ Dia, 0.036″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.116″ OD, 5″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 63.349 lb/in Spring Rate, Stainless Steel
• 3/16″ Head Diam, 3/16″ Shank Diam, 6 Flute 82° High Speed Steel Countersink ALtima Blaze Finish, 1-1/2″ OAL
• Grooving Insert: GE 30504, Solid Carbide TiCN Finish, Neutral, 5.27 mm Cutting Width, 5 mm Max Depth
• Ball End Mill: 0.7087″ Dia, 1.2598″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Square End Mill: 1/4'' Dia, 1/2'' LOC, 1/4'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide Single End, TiAlCN Finish, Spiral Flute, 38 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Turning Insert: DCGT32.52FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT