Products

• Drill Mill: 1/8″ LOC, 2 Flutes, 90 ° Point, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Uncoated
• Impact Socket: 1/2″ Drive 6-Point, 45 mm OAL
• Woodruff Keyseat Cutter: 0.118″ Cut Dia, 0.047″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide
• Drill Mill: 1/16″ Dia, 3/16″ LOC, 2 Flutes, 100 ° Point, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Uncoated
• Tapered End Mill: 15 ° per Side, 0.24″ LOC, 3 Flutes, Solid Carbide, Square End 2″ OAL, Uncoated, Series Miniature End Mills - Tapered - Square
• Drill Mill: 2 Flutes, 90 ° Point, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Uncoated
• Open End Wrench: Single End Head, 32 mm 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• 1″ Head Diam, 3/8″ Shank Diam, 0 Flute 82° Cobalt Countersink Bright Finish, 2-5/8″ OAL, Single End, Straight Shank, Right Hand Cut
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, HSSE Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H4, Series 306
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Spiral Point Tap: 1/4-20, UNC, 3 Flutes, Plug, HSSE Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H5, Series 306
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.88″ OD, 4.25″ Free Length 0.148″ Wire Dia, 63.354 lb Max Load, 23.819 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, HSSE Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H3, Series 306
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Highlighter Marker: Blue, Water-Based 12 Pc
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, TiAlN Finish 1.26″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, TiAlN Finish 1.26″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Spiral Point Tap: 1/4-20, UNC, 3 Flutes, Plug, HSSE Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H3, Series 306
• Spiral Flute Tap: #12-28, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, TiAlN Finish 1.063″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-892SF
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Fluid: GX Cool Liquid, 55 gal Drum
• Turning Insert: EPGT4.51.8VL-W08 TH10, Solid Carbide Uncoated Finish, Left Hand, 0.0010″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: EPGT520.5L-W08 TH10, Solid Carbide Uncoated Finish, Left Hand, 0.0080″ Corner Radius, 75.0 &deg N/A Diamond, Series EPGT
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 26.38; Load Capacity: 200 lbs; Rod Diameter (Decimal Inch): 0.35; Tube Diameter: 0.870; End Fitting Connection: Threaded End; Compressed Length: 16.38; Extension Force:
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 26.38; Load Capacity: 100 lbs; Rod Diameter (Decimal Inch): 0.35; Tube Diameter: 0.870; End Fitting Connection: Threaded End; Compressed Length: 16.38; Extension Force:
• Spiral Flute Tap: #6-32, UNC, 3 Flute, 2-3 P, 2B Class of Fit, HSS-E, TiN Finish Right Hand Flute, Right Hand Thread, H4
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.0572; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 26.38; Load Capacity: 150 lbs; Rod Diameter (Decimal Inch): 0.35; Tube Diameter: 0.870; End Fitting Connection: Threaded End; Compressed Length: 16.38; Extension Force:
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Glass Cloth Tape; Width (Inch): 1; Material Type: UHMW; Color: Black; Adhesive Material: Acrylic Water; Length (yd): 5.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 30.00; Maximum Operating Temperature (F): 200.000
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 1/4'' Dia, 1/2'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 6 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 37 ° Helix, RH Cut, RH Flute, Series VGM6
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Permanent Marker: Orange, Tamperproof
• Screw Machine Length Drill Bit: 0.191″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• #26, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 0.48″ Flute Length, 1-1/2″ OAL, Series 306
• Torx Drivers; End Type: Torx; Torx Size: T45; Handle Type: Comfort Grip; Tip Material: Steel; Handle Material: Plastic; Finish: Chrome
• #23, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 0.48″ Flute Length, 1-1/2″ OAL, Series 306
• Duct Tape: 2″ Wide, 4 mil Thick, Aluminum Foil Acrylic Adhesive, 17 lb/in Tensile Strength
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: RCMT2507M0-RS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.4920″ Corner Radius, 0.0 &deg N/A Round, Series RCMT
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, ZrN Finish Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Drill Mills; Number Of Flutes: 2; End Mill Material: Solid Carbide; Helix Angle: 20.00; Point Angle: 60.00; Overall Length: 3.50
• Chucking Reamer: 0.4134″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, Cobalt 6 Flute
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Drill Mills; Number Of Flutes: 2; End Mill Material: Solid Carbide; Helix Angle: 20.00; Point Angle: 142.00; Overall Length: 3.50
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Drill Mills; Number Of Flutes: 2; End Mill Material: Solid Carbide; Helix Angle: 20.00; Point Angle: 120.00; Overall Length: 3.50
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Straight Flutes Tap: Metric, 5 Flutes, Modified Bottoming, 6HX, Powdered Metal High Speed Steel, TiAlN Finish Right Hand, Series MTS
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 1/2'' Dia, 1'' LOC, 1/2'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 1/2'' Dia, 1'' LOC, 1/2'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.009″ Dia, 0.027″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 15/64″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5-LN
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• CPMT090304XP PR1535 Carbide Turning Insert Megacoat Nano Finish, Neutral, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1252″ Thick, 80° Diamond
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Engraving Cutter: 120 °, 1/8″ Dia, Pointed, Solid Carbide AlTiN Finish, 0.036″ LOC, 1/8″ Shank, 1-1/2″ OAL, 2 Flutes, Use on Ferrous & Non-Ferrous Metals
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• WNMG432-WM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Square
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• WNMG432-WMX 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Diamond
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• WNMG431-WF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Triangle
• Spiral Flute Tap: M8 x 1.25, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Left Hand Flute, Left Hand Thread, D6 & D7, Series 4629
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• WNMG433-WF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Diamond
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• WNMG432-WF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Diamond
• Socket Extensions; Tool Type: BOLT-THRU EXTENSION; Extension Type: Ball Locking; Drive Size: 3/8; Finish: Chrome; Overall Length (Decimal Inch): 3.0000; Material: Steel
• Square End Mill: 0.035'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• WNMG431-WF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Diamond
• Drill Mill: 4 Flutes, 90 ° Point, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Uncoated
• WNMG433-WF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Triangle
• Square End Mill: 1/2'' Dia, 1-1/4'' LOC, 1/2'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• WNMG433-WMX 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Triangle
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.06″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Boring Bar: 9/64″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Square End Mill: 5/32'' Dia, 15/64'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Turning Insert: WNMU 08 04 12-WM 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series WNMU-WM
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 583
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.3779″ OAL, 0.0039″ Corner Radius
• Turning Insert: WNMU 08 04 12-WM 4425, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series WNMU-WM
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.3779″ OAL, 0.0079″ Corner Radius
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.05″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.3779″ OAL, 0.0079″ Corner Radius
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.015″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Boring Bar: 0.16″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Boring Bar: 9/64″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Woodruff Keyseat Cutter: 0.062″ Cut Dia, 0.02″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide
• Screw Machine Length Drill Bit: 0.1969″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Square End Mill: 3/16'' Dia, 9/32'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Combo Drill & Countersink: 3/64, 1/8″ Body Dia, High Speed Steel Bright (Polished) Finish, 3/64″ Point Dia, Right Hand Cut, Series 594
• Square End Mill: 0.1718'' Dia, 0.258'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Engraving Cutter: 600 °, 0.008″ Dia, Tipped Off Point AlTiN Nano Finish, 0.101″ LOC, 1″ Shank, 1-1/2″ OAL, 2 Flutes
• Square End Mill: 5/32'' Dia, 15/64'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.0787″ Dia, 0.1181″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• Engraving Cutter: 300 °, 0.008″ Dia, Tipped Off Point AlTiN Nano Finish, 0.218″ LOC, 1″ Shank, 1-1/2″ OAL, 2 Flutes
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• Jobber Length Drill Bit: 0.1469″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 0.1718'' Dia, 0.258'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 5/32'' Dia, 15/64'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.04″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Ball End Mill: 0.25″ Dia, 1.125″ LOC, 3 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 5/32'' Dia, 15/64'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Two-Part Epoxy: Foil Pack Adhesive 3 to 5 min Working Time, -40 to 82 ° F, Series EP5
• Corner Radius End Mill: 1/4″ Dia, 2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Jobber Length Drill Bit: 0.0421″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Internal Boring Bar: 0.1575″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.3779″ OAL, 0.0039″ Corner Radius
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.062″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Compression Spring: 1.41″ OD, 2.375″ Free Length 0.125″ Wire Dia, 39.821 lb Max Load, 33.565 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 3/16'' Dia, 9/32'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Square End Mill: 3/16'' Dia, 3/8'' LOC, 3/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN+ Finish, Spiral Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series 6/44
• Screw Machine Length Drill Bit: 0.1968″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Compression Spring: 2.761″ OD, 8″ Free Length 0.225″ Wire Dia, 99.659 lb Max Load, 24.936 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.1562″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1080; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 1.4″ OD, 5.25″ Free Length 0.177″ Wire Dia, 100.823 lb Max Load, 54.145 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 9″ Free Length 226.432 lb Max Load, 108.031 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.166″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: M2.50 x, 0.45, M, Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D3, Series B0513500
• Square End Mill: 0.057'' Dia, 0.086'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.058'' Dia, 0.087'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 0.823″ OD, 5.75″ Free Length 0.125″ Wire Dia, 85.968 lb Max Load, 41.844 lb/in Spring Rate, Music Wire
• Boring Bar: 0.29″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Square End Mill: 0.053'' Dia, 0.08'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.469″ OD, 5.25″ Free Length 0.135″ Wire Dia, 62.105 lb Max Load, 20.124 lb/in Spring Rate, Music Wire
• Square End Mill: 0.043'' Dia, 0.129'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Hand Hex & Torx Bit Sockets; Socket Type: Torx Bit Socket; Drive Size (Fractional Inch): 1/2; Torx Size: T45; Bit Length (mm): 25.00
• Square End Mill: 0.053'' Dia, 0.159'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.038'' Dia, 0.114'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.057'' Dia, 0.171'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.044'' Dia, 0.132'' LOC, 1.5'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Helical Flute, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.054'' Dia, 0.162'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: VCGW222FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Square End Mill: 0.043'' Dia, 0.065'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: VCGT221FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Turning Insert: VCGT222FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Compression Spring: 0.999″ OD, 5.75″ Free Length 0.125″ Wire Dia, 72.088 lb Max Load, 27.367 lb/in Spring Rate, Music Wire
• Square End Mill: 0.044'' Dia, 0.132'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 7.5mm LOC, 2.5mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Compression Spring: 0.999″ OD, 4″ Free Length 0.148″ Wire Dia, 114.443 lb Max Load, 81.065 lb/in Spring Rate, Music Wire
• Square End Mill: 6mm LOC, 2mm Shank Dia, 50mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6478
• Ball End Mill: 0.0197″ Dia, 0.0236″ LOC, 2 Flute, Solid Carbide 57 mm OAL, 6 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 1.058″ OD, 3.25″ Free Length 0.092″ Wire Dia, 22.86 lb Max Load, 12.742 lb/in Spring Rate, Stainless Steel
• Woodruff Keyseat Cutter: 0.2362″ Cut Dia, 0.039″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, PM-HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4634
• Compression Spring: 1.351″ OD, 9″ Free Length 0.112″ Wire Dia, 40.024 lb Max Load, 6.883 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, Semi-Bottoming, 6GX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D7 & D8, Series 4625
• Compression Spring: 1.351″ OD, 5.25″ Free Length 0.135″ Wire Dia, 67.237 lb Max Load, 23.082 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, VC-10 Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H4, Series 316
• Spiral Point Tap: 1/4-20, UNC, 3 Flutes, Plug, VC-10 Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H5, Series 316
• Compression Spring: 1.351″ OD, 3.25″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 77.35 lb/in Spring Rate, Music Wire
• 9' Bungee Cord with Ball End White
• Compression Spring: 1.41″ OD, 3.25″ Free Length 0.162″ Wire Dia, 106.934 lb Max Load, 71.197 lb/in Spring Rate, Music Wire
• Screw Machine Length Drill Bit: 0.161″ Dia, 140 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series R458
• Spiral Point Tap: 1/4-20, UNC, 3 Flutes, Plug, VC-10 Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H3, Series 316
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, VC-10 Finish 0.598″ Thread Length, 3.14″ OAL, Right Hand, H3, Series 316
• Compression Spring: 1.41″ OD, 2.5″ Free Length 0.177″ Wire Dia, 136.472 lb Max Load, 136.897 lb/in Spring Rate, Music Wire
• Square End Mill: 0.042'' Dia, 0.126'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Polytetrafluroethylene Film Tape: 1/4″ Wide, 36 yd Long, 4 mil Thick 20 Lb/In Tensile Strength, Silicone Adhesive, 356 ° F
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1113; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball End Mill: 0.1406″ Dia, 0.3125″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Single End, Series SAPB
• Compression Spring: 1.41″ OD, 2.125″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 234.515 lb/in Spring Rate, Music Wire
• Square End Mill: 0.058'' Dia, 0.174'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.469″ OD, 4″ Free Length 0.148″ Wire Dia, 80.145 lb Max Load, 37.41 lb/in Spring Rate, Music Wire
• Compression Spring: 1.586″ OD, 3.25″ Free Length 0.162″ Wire Dia, 95.765 lb Max Load, 57.488 lb/in Spring Rate, Music Wire
• High Speed Steel Solid Pilot Counterbore Bright (Polished), 0.197″ Diam Straight Shank, 0.1773″ Pilot Diam, 71mm OAL
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 10.0000; Tensile Strength (Lb./Inch): 225.00; Maximum Operating Temperature (F): 500.000
• Milling Inserts; Insert Style: RDKT; Insert Size: 1604M0; Insert Material: Solid Carbide; Manufacturer Grade: YG602; Length (Inch): 15/32; Thickness (Inch): 3/16; Series: RDKT; Cutting Direction: Right Hand; Coating/Finish: TiAlN; Width (Decimal Inch - 4
• Ball End Mill: 0.3125″ Dia, 0.8125″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, AlTiN Coated, Single End, Series XPB-NB
• 9/64″, 118° Drill Point, 9/64″ Shank Diam, Fast Spiral Circuit Board Drill Bit 3/4″ Flute Length, 1-1/2″ OAL, Series 300
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 3/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6485
• Turning Insert: RCMX 10 03 00 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.1969″ Corner Radius, N/A Series RCMX
• Square End Mill: 1/16'' Dia, 3/16'' LOC, 3/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6485
• Compression Spring: 0.97″ OD, 4″ Free Length 0.148″ Wire Dia, 118.326 lb Max Load, 87.2 lb/in Spring Rate, Music Wire
• Turning Insert: RCMX 10 03 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1969″ Corner Radius, N/A Series RCMX
• Compression Spring: 0.999″ OD, 1.875″ Free Length 0.112″ Wire Dia, 41.068 lb Max Load, 52.129 lb/in Spring Rate, Stainless Steel
• O-Ring: 0.101″ ID x 0.241″ OD, 0.07″ Thick, Dash 005, Viton Round Cross Section
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #0; Inner Diameter (Decimal Inch): 0.1597; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9159; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Brackets; Type: Folding Bracket; Length (mm): 199.50; Width (mm): 29.00; Height (mm): 116.0000; Load Capacity (Lb.): 198.000; Finish/Coating: Electro Polished; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• Compression Spring: 1.351″ OD, 4″ Free Length 0.148″ Wire Dia, 86.714 lb Max Load, 43.371 lb/in Spring Rate, Music Wire
• Drawer Slides; Type: Mini Drawer Slide; Extension Style: Full; Slide Length: 150.00; Travel Length: 109.00; Load Capacity (Lb.): 46.297; Additional Information: Width: 5.2 mm; Length: 259 mm; Height: 15.5 mm; Slide Length: 150.00; Material: Stainless Stee
• Compression Spring: 1.586″ OD, 7″ Free Length 46.594 lb Max Load, 10.205 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: #4-48, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-8 Finish 0.433″ Thread Length, 2.205″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50S800
• Square End Mill: 3/32'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 2'' OAL, 1 Flute, Solid Carbide Single End, Amorphous Diamond Finish, Downcut Flute, 22 ° Helix, RH Cut, RH Flute
• Spiral Flute Tap: #4-48, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 2.205″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C300
• Combo Drill & Countersink: 1/16, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 292
• Tapered End Mill: 6 ° per Side, 1/4″ LOC, 3 Flutes, Solid Carbide, Square End 1″ Shank Dia, 1-1/2″ OAL, Uncoated, Series Miniature End Mills - Tapered - Square
• Screw Machine Length Drill Bit: 0.332″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Compression Spring: 2.233″ OD, 9.5″ Free Length 160.326 lb Max Load, 44.874 lb/in Spring Rate, Stainless Steel
• Combo Drill & Countersink: #16, 1/2″ Body Dia, 118 ™, Cobalt Bright (Polished) Finish, 3/16″ Point Dia, 3/16″ Point Length, 3″ OAL, Right Hand Cut
• Ball End Mill: 0.0781″ Dia, 0.117″ LOC, 2 Flute, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Black Double-Sided Urethane Foam Tape: 2″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.881″ OD, 6″ Free Length 0.125″ Wire Dia, 80.864 lb Max Load, 34.202 lb/in Spring Rate, Music Wire
• White Double-Sided Urethane Foam Tape: 1″ Wide, 2 yd Long, 62.5 mil Thick, Acrylic Adhesive
• UHMW Film Tape: 3/4″ Wide, 5 yd Long, 10.2 mil Thick 30 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.058″ OD, 2.75″ Free Length 0.098″ Wire Dia, 27.141 lb Max Load, 18.967 lb/in Spring Rate, Stainless Steel
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: MH20-080425E-L30 2040, 2040, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.469″ OD, 4.25″ Free Length 0.148″ Wire Dia, 80.145 lb Max Load, 35.045 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.469″ OD, 9″ Free Length 0.148″ Wire Dia, 80.145 lb Max Load, 16.195 lb/in Spring Rate, Music Wire
• Chamfer Mill: 6 mm Dia, 4 Flutes, Solid Carbide, Corner Chamfer End 57 mm OAL, 6 mm Shank Dia, TiAlN Coated
• Compression Spring: 1.528″ OD, 7″ Free Length 48.29 lb Max Load, 10.77 lb/in Spring Rate, Music Wire
• Chamfer Mill: 6 mm Dia, 4 Flutes, Solid Carbide, Corner Chamfer End 57 mm OAL, 6 mm Shank Dia, TiAlN Coated
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Kyocera RDFG 12FR PR915 Grade PVD Carbide, Round, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Stainless Steel, (K) Gray Cast Iron, (K) Nodular Cast Iron
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: 0.1815″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.999″ OD, 7″ Free Length 0.192″ Wire Dia, 167.453 lb Max Load, 129.486 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End