Products

• Corner Radius End Mill: 0.03″ Dia, 0.156″ LOC, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 288
• Ball End Mill: 0.1181″ Dia, 0.1181″ LOC, 2 Flute, Solid Carbide 56.5 mm OAL, 6 mm Shank Dia, 20 ° Helix, Uncoated, Single End
• O-Ring: 1-3/16″ ID x 1-7/16″ OD, 1/8″ Thick, Dash 217, HNBR Round Cross Section
• Spiral Flute Tap: 9/16-12, UNC, 3 Flute, Semi-Bottoming, 2BX Class of Fit, Slidur Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 4652
• Woodruff Keyseat Cutter: 0.093″ Cut Dia, 0.031″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide
• O-Ring: 2-7/8″ ID x 3-1/4″ OD, 3/16″ Thick, Dash 336, HNBR Round Cross Section
• Spiral Flute Tap: 9/16-12, UNC, 3 Flute, Bottoming, 2BX Class of Fit, Slidur Finish Right Hand Flute, Right Hand Thread, H6 & H7, Series 4654
• Corner Radius End Mill: 0.025″ Dia, 1/8″ LOC, 0.004″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.0157″ Dia, 0.0472″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.116″ OD, 2.875″ Free Length 0.192″ Wire Dia, 210.085 lb Max Load, 290.085 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.0157″ Dia, 0.0236″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Burrs; Head Material: Carbide; Head Shape: Tree with Radius; Tooth Style: Diamond Cut; Cutting Diameter (Inch): 0.3750; Shank Diameter (mm): 0.2500; Overall Length: 6.00; Finish: Uncoated; Maximum Rpm: 63000.000
• Compression Spring: 0.764″ OD, 5.25″ Free Length 0.148″ Wire Dia, 144.393 lb Max Load, 122.439 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.298″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Compression Spring: 0.881″ OD, 4.75″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 8.644 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.413″ Dia, 135 °, High Speed Steel Bright/Uncoated, 5.25″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Chucking Reamer: 0.277″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Ball End Mill: 0.0625″ Dia, 0.186″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Compression Spring: 0.999″ OD, 9.5″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 10.67 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.276″ Dia, 3-1/4″ OAL, 1-1/8″ Flute Length, Straight Shank, Solid Carbide 6 Flute
• Jobber Length Drill Bit: 0.377″ Dia, 135 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Jobber Length Drill Bit: 0.397″ Dia, 135 °, Cobalt Bright/Uncoated, 5.125″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 1.058″ OD, 5.25″ Free Length 0.085″ Wire Dia, 18.42 lb Max Load, 5.912 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 6.5″ Free Length 0.135″ Wire Dia, 67.237 lb Max Load, 18.451 lb/in Spring Rate, Music Wire
• Compression Spring: 1.821″ OD, 3.25″ Free Length 0.177″ Wire Dia, 107.424 lb Max Load, 63.047 lb/in Spring Rate, Music Wire
• Compression Spring: 1.939″ OD, 3.25″ Free Length 0.177″ Wire Dia, 101.207 lb Max Load, 56.878 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 2.875″ Free Length 36.876 lb Max Load, 24.082 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.01″ Dia, 1/64″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #000; Inner Diameter (Decimal Inch): 0.0484; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.
• Compression Spring: 1.528″ OD, 5.25″ Free Length 0.148″ Wire Dia, 77.215 lb Max Load, 26.177 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.004″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.528″ OD, 2.625″ Free Length 0.192″ Wire Dia, 158.491 lb Max Load, 153.39 lb/in Spring Rate, Music Wire
• CCGT21.50.5LFX-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.252″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 80° Included Angle, Series AC5000S
• Compression Spring: 1.586″ OD, 2.625″ Free Length 0.192″ Wire Dia, 153.127 lb Max Load, 142.173 lb/in Spring Rate, Music Wire
• CCGT21.5.001RFX Carbide Turning Insert Absotech Bronze Finish, 0.252″ Long, 1/4″ Inscribed Circle, 0.0012″ Corner Radius, 0.0937″ Thick, 80° Included Angle, Series AC5000S
• Horizontal Locker: Padlock Hasp
• CCGT21.50RFX-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.252″ Long, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 80° Included Angle, Series AC5000S
• CCGT04X102LFY-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.1957″ Long, 0.1693″ Inscribed Circle, 0.0079″ Corner Radius, 0.0709″ Thick, 80° Included Angle, Series AC5000S
• Grooving Insert: BA, Solid Carbide Firex Finish, Neutral, 3 mm Cutting Width, 5 mm Max Depth, Series 25605
• CCGT04X104RFY-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.1957″ Long, 0.1693″ Inscribed Circle, 0.0157″ Corner Radius, 0.0709″ Thick, 80° Included Angle, Series AC5000S
• CCGT21.50LFX-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.252″ Long, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 80° Included Angle, Series AC5000S
• CCGT04X104LFY-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.1957″ Long, 0.1693″ Inscribed Circle, 0.0157″ Corner Radius, 0.0709″ Thick, 80° Included Angle, Series AC5000S
• CCGT21.51LFX-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.252″ Long, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 0.0937″ Thick, 80° Included Angle, Series AC5000S
• Grooving Insert: BA, Solid Carbide Firex Finish, Neutral, 3 mm Cutting Width, 5 mm Max Depth, Series 25605
• Grooving Insert: BA, Solid Carbide Firex Finish, Neutral, 2.5 mm Cutting Width, 5 mm Max Depth, Series 25605
• Chucking Reamer: 0.506″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• CCGT21.5.001RFX Carbide Turning Insert Absotech Bronze Finish, 0.252″ Long, 1/4″ Inscribed Circle, 0.0012″ Corner Radius, 0.0937″ Thick, 80° Included Angle, Series AC5000S
• Clear Double-Sided Acrylic Tape: 6″ Wide, 36 yd Long, 40 mil Thick, Acrylic Adhesive
• Milling Insert: WKP35G, Solid Carbide N/A Finish, 1/8″ Insert Thick,
• Chucking Reamer: 0.502″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Compression Spring: 1.175″ OD, 6″ Free Length 0.135″ Wire Dia, 76.651 lb Max Load, 25.738 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.5035″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Chucking Reamer: 0.51″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Spiral Flute Tap: #6-32, UNC, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish Right Hand Flute, Right Hand Thread, H4, Series B050C400
• Corner Radius End Mill: 2 Flutes, Solid Carbide 35 ° Helix, Carbo Coated, Ball End, Centercutting, Series 6984
• Compression Spring: 1.937″ OD, 6″ Free Length 5.26 mm Wire Dia, 427.29 N Max Load, Stainless Steel
• Grooving Insert: TQSS CT3000, Cermet Uncoated, Neutral, 0.118″ Cutting Width, Series TQS27
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0238; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Square End Mill: 1/2'' Dia, 1-1/4'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2031
• Compression Spring: 0.705″ OD, 4.5″ Free Length 0.085″ Wire Dia, 27.035 lb Max Load, 13.513 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 5/16″ Dia, 0.813″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 0.705″ OD, 6.5″ Free Length 0.135″ Wire Dia, 120.912 lb Max Load, 78.701 lb/in Spring Rate, Music Wire
• Compression Spring: 1.293″ OD, 4.5″ Free Length 0.25″ Wire Dia, 261.179 lb Max Load, 365.12 lb/in Spring Rate, Stainless Steel
• Jobber Length Drill Bit: 0.4724″ Dia, 118 °, High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 651
• Compression Spring: 0.588″ OD, 4.25″ Free Length 0.085″ Wire Dia, 31.918 lb Max Load, 20.879 lb/in Spring Rate, Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0323; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Spring: 2.056″ OD, 3.25″ Free Length 0.177″ Wire Dia, 95.708 lb Max Load, 51.879 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 2.25″ Free Length 0.112″ Wire Dia, 46.148 lb Max Load, 54.137 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 3.5″ Free Length 0.177″ Wire Dia, 185.703 lb Max Load, 212.367 lb/in Spring Rate, Music Wire
• Compression Spring: 1.016″ OD, 4.5″ Free Length 0.12″ Wire Dia, 48.616 lb Max Load, 25.182 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.88″ OD, 5.5″ Free Length 0.148″ Wire Dia, 63.354 lb Max Load, 18.098 lb/in Spring Rate, Music Wire
• Square End Mill: 1/2'' Dia, 1-1/4'' LOC, 1/2'' Shank Dia, 3'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.469″ OD, 2.625″ Free Length 0.192″ Wire Dia, 164.335 lb Max Load, 166.643 lb/in Spring Rate, Music Wire
• Compression Spring: 1.645″ OD, 8″ Free Length 0.162″ Wire Dia, 92.517 lb Max Load, 21.03 lb/in Spring Rate, Music Wire
• Square End Mill:
• Compression Spring: 1.586″ OD, 4″ Free Length 0.162″ Wire Dia, 95.765 lb Max Load, 45.759 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3 Flutes, Solid Carbide 39, 40 & 41 ° Helix, Carbo Coated, Corner Chamfer End, Centercutting, Series 6978
• Compression Spring: 1.586″ OD, 2.125″ Free Length 0.207″ Wire Dia, 188.324 lb Max Load, 251.253 lb/in Spring Rate, Music Wire
• Milling Insert: WAK15, Solid Carbide N/A Finish,
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Milling Insert: WAK15, Solid Carbide N/A Finish,
• Corner Chamfer End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, 0.02″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Milling Insert: WKP25S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.175″ OD, 2.375″ Free Length 0.112″ Wire Dia, 35.246 lb Max Load, 30.271 lb/in Spring Rate, Stainless Steel
• Polyethylene Film Tape: 24″ Wide, 25' x 2 mil Thick 2,500 Lb/In Tensile Strength, Acrylic Adhesive
• Square End Mill: 1/8'' Dia, 5/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.05″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Duct Tape: 2″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Square End Mill: 3/32'' Dia, 29/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 41 ° Helix, AlTiN Nano Coated, Corner Radius End
• Jobber Length Drill Bit: 0.1969″ Dia, 118 °, Cobalt TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 5519
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 1/64″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Square End Mill: 0.035'' Dia, 0.105'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Undercutting End Mills; Mill Diameter (Decimal Inch): 0.1000; Overall Length (Inch): 1-1/2; Radius: 0.0500; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 0.3750; Shank Diame
• Press Fit Headed Drill Bushing: Type H, #11 ID, 5/16″ OD
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Undercutting End Mills; Mill Diameter (Decimal Inch): 0.1000; Overall Length (Inch): 1-1/2; Radius: 0.0500; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 0.0312; Shank Diame
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headed Drill Bushing: Type H, #15 ID, 5/16″ OD
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headed Drill Bushing: Type H, #24 ID, 5/16″ OD
• 5/64″ Diam 270° Wrap Angle 0.0666″ LOC 2-Flute Uncoated Undercut End Mill 1/8″ Shank Diam, 1-1/2″ OAL, 0.0391″ Radius, Solid Carbide
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headed Drill Bushing: Type H, #22 ID, 5/16″ OD
• Corner Radius End Mill: 0.0236″ Dia, 0.0354″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Press Fit Headed Drill Bushing: Type H, #28 ID, 5/16″ OD
• Corner Radius End Mill: 3/16″ Dia, 1.68″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Press Fit Headed Drill Bushing: Type H, #27 ID, 5/16″ OD
• Chucking Reamer: 0.1735″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Compression Spring: 0.764″ OD, 1.875″ Free Length 0.125″ Wire Dia, 70.117 lb Max Load, 147.776 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill Heads; Mill Diameter (mm): 12.00; Mill Diameter (Decimal Inch): 0.4724; Number of Flutes: 2; Length of Cut (mm): 9.0000; Length of Cut (Inch): 0.3543; Connection Type: Duo-Lock 12; Overall Length (mm): 15.0000; Overall Length (Inch): 0.5906;
• Press Fit Headed Drill Bushing: Type H, 3/16″ ID, 5/16″ OD
• Compression Spring: 1.351″ OD, 2.25″ Free Length 0.135″ Wire Dia, 50.962 lb Max Load, 50.483 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 14.50; Load Capacity: 100 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9.5; Extension F
• Ball End Mill: 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Compression Spring: 1.469″ OD, 2.875″ Free Length 38.293 lb Max Load, 25.528 lb/in Spring Rate, Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 14.50; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9.5; Extension Fo
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.025″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 14.50; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9.5; Extension Fo
• Compression Spring: 1.586″ OD, 3.25″ Free Length 0.177″ Wire Dia, 122.347 lb Max Load, 80.53 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.025″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 14.50; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9.5; Extension Fo
• Ball End Mill: 0.09″ Dia, 0.45″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Milling Insert: XOGX 122510-MF4 CTPP216, CTPP216, Solid Carbide N/A Finish,
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Steel; Extended Length: 14.50; Load Capacity: 80 lbs; Rod Diameter (Decimal Inch): 0.25; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 9.5; Extension Fo
• Jobber Length Drill Bit: 0.1772″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Ball End Mill: 0.085″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• VBMT221-PF 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0156″ Corner Radius, 1/8″ Thick, 35° Triangle
• Ball End Mill: 0.095″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• VBMT220-PF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 1/8″ Thick, 35° Triangle
• DNMG433-SM S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 55° Square
• VBMT21.52-UF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 3/32″ Thick, 35° Triangle
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• DNMG432-SF S205 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 55° Triangle
• Turning Insert: VBMT 11 02 08-UF 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Diamond 35 ™, Series VBMT-UF
• Ball End Mill: 0.078″ Dia, 0.118″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Single End
• Grooving Insert: TDTRU TT7505, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-RU (Full Radius)
• Chucking Reamer: 0.14″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Grooving Insert: TDTRU PV3030, Cermet TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-RU (Full Radius)
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 1/8'' Dia, 3/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mill: 3 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.175″ OD, 1.75″ Free Length 0.125″ Wire Dia, 47.326 lb Max Load, 64.236 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, 0.005″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated
• TEMR43PTERH PR1225 Carbide Milling Insert Megacoat Finish, 0.1874″ Thick
• .210″ x 5' Silicone Round Cord Stock 450°F Max, Shore 70A, 850 psi Tensile Strength, Red
• Grooving Insert: TDTRU TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.157″ Cutting Width, Series TDT-RU (Full Radius)
• Corner Radius End Mill: 3/16″ Dia, 1.68″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.823″ OD, 3.25″ Free Length 0.098″ Wire Dia, 34.373 lb Max Load, 24.5 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• O-Ring: 10-1/2″ ID x 10-7/8″ OD, 3/16″ Thick, Dash 378, HNBR Round Cross Section
• Corner Chamfer End Mill: 0.25″ Dia, 0.75″ LOC, 4 Flute, 0.01″ Chamfer Width, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.075″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.1964; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Damping Stays; Type: Lid Stay; Capacity: 95.700; 40; Overall Length (mm): 223.6000; Thickness (mm): 2; Width (mm): 32.00; Side: Left Hand; Maximum Opening: 90.000; Finish/Coating: Chrome; Mounting Hole Size Diameter: 3.800; Material: Nylon; Brass; Steel;
• Compression Spring: 1.351″ OD, 2.75″ Free Length 0.192″ Wire Dia, 177.359 lb Max Load, 190.014 lb/in Spring Rate, Music Wire
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Damping Stays; Type: Lid Stay; Capacity: 95.700; 40; Overall Length (mm): 223.6000; Thickness (mm): 2; Width (mm): 32.00; Side: Right Hand; Maximum Opening: 180.000; Finish/Coating: Chrome; Mounting Hole Size Diameter: 3.800; Material: Nylon; Brass; Steel
• Compression Spring: 1.704″ OD, 2.625″ Free Length 0.192″ Wire Dia, 143.236 lb Max Load, 123.614 lb/in Spring Rate, Music Wire
• Milling Insert: WKP25S, Solid Carbide N/A Finish,
• Compression Spring: 1.645″ OD, 2.625″ Free Length 0.192″ Wire Dia, 148.02 lb Max Load, 132.267 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Single End
• Compression Spring: 1.586″ OD, 7″ Free Length 0.135″ Wire Dia, 57.728 lb Max Load, 13.226 lb/in Spring Rate, Music Wire
• Compression Spring: 2.35″ OD, 9.5″ Free Length 220 lb Max Load, 46.904 lb/in Spring Rate, Music Wire
• Hook & Loop; Shape: Roll; Tape Width: 2.00 in; Color: Black; Roll Length (Feet): 5.00; Component Type: Hook & Loop
• Compression Spring: 0.294″ OD, 1.75″ Free Length 0.03″ Wire Dia, 3.451 lb Max Load, 3.619 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Hook & Loop; Shape: Roll; Color: Black; Roll Length (Feet): 20.00; Component Type: Hook & Loop
• Milling Insert: SPET10T3PPSRGB2, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: SPET10T3PPELGB2, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• Chamfer Mill: 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Corner Radius End Mill: 1/32″ Dia, 1/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Milling Insert: SPET10T3PPERGB2, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• Corner Radius End Mill: 0.315″ Dia, 0.3937″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: SPCT10T3PPERLD2, KCK20B, Solid Carbide N/A Finish, 0.3940″ OAW
• Boring Bar: 0.32″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Spiral Flute Tap: M6 x 0.75, MF, Modified Bottoming, 6H Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D4, Series C0451000
• Impact Socket: 3/4″ Drive 6-Point
• Compression Spring: 0.294″ OD, 3.25″ Free Length 0.029″ Wire Dia, 3.97 lb Max Load, 1.96 lb/in Spring Rate, Music Wire
• Compression Spring: 2.291″ OD, 9.5″ Free Length 225.314 lb Max Load, 49.164 lb/in Spring Rate, Music Wire
• Impact Socket: 3/4″ Drive 6-Point
• Open End Wrench: Double End Head, 1/2 x 9/16″ 15 ° Head Angle, Vanadium Steel, Matte Chrome Finish
• Impact Socket: 6-Point
• Impact Socket: 6-Point
• Square End Mill: 1/2'' Dia, 1'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, FIREX Finish, Helical Flute, Centercutting, RH Cut, RH Flute, Series 19954
• Wood Shaper Accessories; Accessory Type: Collet; For Use With: 240-7198 Wood Shaper; Size (Inch): 1/4; Description: 1/4″ Collet
• Boring Bar: 6 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 3.90 mm Shank Dia, 39.80 mm OAL, 0.03 mm Corner Radius
• Chucking Reamer: 0.041″ Dia, 2-1/2″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Chucking Reamer: 0.055″ Dia, 2-1/2″ OAL, 1/2″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Chucking Reamer: 9/64″ Dia, 4″ OAL, 1″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Chucking Reamer: 5/32″ Dia, 4″ OAL, 1″ Flute Length, Straight Shank, High Speed Steel 4 Flute
• Compression Spring: 0.588″ OD, 3.75″ Free Length 0.092″ Wire Dia, 39.417 lb Max Load, 33.403 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 2.375″ Free Length 0.112″ Wire Dia, 41.068 lb Max Load, 40.011 lb/in Spring Rate, Stainless Steel
• White Double-Sided Polyethylene Foam Tape: 3/4″ Wide, 5 yd Long, 31 mil Thick, Rubber Adhesive
• Corner Radius End Mill: 0.313″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 0.313″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Boring Bar: 3.5 mm Min Bore, 13 mm Max Depth, Right Hand Cut, Carbide 3 mm Shank Dia, 39 mm OAL, 0.05 mm Corner Radius
• Milling Insert: XPLX 060305SR-M50 CTPP225, CTPP225, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.09″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Spiral Flute Tap: #6-40, UNF, 3 Flute, 2-3 P, 3B Class of Fit, High Speed Steel-E, GLT-1 Finish 2.205″ OAL, Left Hand Flute, Left Hand Thread, X, Series Enorm Z
• Boring Bar: 3.5 mm Min Bore, 13 mm Max Depth, Right Hand Cut, Carbide 3 mm Shank Dia, 39 mm OAL, 0.15 mm Corner Radius
• Safes; Type: Book Safe; Internal Width (Inch): 5-1/2; Internal Height (Inch): 7-3/4; Internal Depth (Inch): 2-1/4; External Width (Inch): 7; External Height (Inch): 10-1/2; External Depth (Inch): 3-1/2; UL Fire Rating (Hours): Not Rated
• Spiral Flute Tap: #6-32, UNC, 3 Flute, 2-3 P, 3B Class of Fit, High Speed Steel-E, GLT-1 Finish 2.205″ OAL, Left Hand Flute, Left Hand Thread, X, Series Enorm Z
• Safes; Type: Book Safe; Internal Width (Inch): 5-1/2; Internal Height (Inch): 7-3/4; Internal Depth (Inch): 2-1/4; External Width (Inch): 7; External Height (Inch): 10-1/2; External Depth (Inch): 3-1/2; UL Fire Rating (Hours): Not Rated
• Boring Bar: 3.5 mm Min Bore, 13 mm Max Depth, Right Hand Cut, Carbide 3 mm Shank Dia, 39 mm OAL, 0.08 mm Corner Radius
• Safes; Type: Book Safe; Internal Width (Inch): 5-1/2; Internal Height (Inch): 7-3/4; Internal Depth (Inch): 2-1/4; External Width (Inch): 7; External Height (Inch): 10-1/2; External Depth (Inch): 3-1/2; UL Fire Rating (Hours): Not Rated
• Boring Bar: 3.5 mm Min Bore, 13 mm Max Depth, Right Hand Cut, Carbide 3 mm Shank Dia, 39 mm OAL, 0.15 mm Corner Radius
• Safes; Type: Book Safe; Internal Width (Inch): 8-3/4; Internal Height (Inch): 13; Internal Depth (Inch): 2-3/4; External Width (Inch): 7; External Height (Inch): 11; External Depth (Inch): 2-1/4; UL Fire Rating (Hours): Not Rated
• Safes; Type: Book Safe; Internal Width (Inch): 5-1/2; Internal Height (Inch): 7-3/4; Internal Depth (Inch): 1; External Width (Inch): 7-1/2; External Height (Inch): 10-1/2; External Depth (Inch): 1-3/4; UL Fire Rating (Hours): Not Rated
• Chucking Reamer: 21/64″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Safes; Type: Compact Personal Safe; Internal Width (Inch): 5-3/4; Internal Height (Inch): 1-1/4; Internal Depth (Inch): 5-1/4; External Width (Inch): 6-15/64; External Height (Inch): 2-47/64; External Depth (Inch): 7-29/32; UL Fire Rating (Hours): Not Rat
• Safes; Type: Compact Personal Safe; Internal Width (Inch): 5; Internal Height (Inch): 2-1/2; Internal Depth (Inch): 7-3/4; External Width (Inch): 5-29/32; External Height (Inch): 2-3/4; External Depth (Inch): 8-27/32; UL Fire Rating (Hours): Not Rated
• Milling Insert: OAKU 060508SR-M50 CTCM235, CTCM235, Solid Carbide N/A Finish, 1.0000″ OAW
• SNMG434EGZ-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.063″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC4000K
• Milling Insert: OAKU 060508SL-M50 CTCK215, CTCK215, Solid Carbide N/A Finish, 1.0000″ OAW
• SNMG433ENZ AC8025P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Chucking Reamer: 0.143″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• SNMG431EFE AC8025P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Semi-Bottoming, 2BX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, H5 & H6, Series 0391
• SNMG433EFE AC8025P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Latches; Type: Compression Draw Latch; Length (mm): 136.40; Width (mm): 25.40; Height (mm): 25.8000; Finish/Coating: Polished; Distance Between Mounting Hole Centers: 53; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel; Descript
• SNMG433EEM AC8015P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• SNMG433ENG AC8025P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Combo Drill & Countersink: #4-1/2, 3/8″ Body Dia, High Speed Steel Bright (Polished) Finish, 9/64″ Point Dia, 9/64″ Point Length, 5″ OAL, Right Hand Cut
• Grooving Insert: GCM7004GF AC830P, Solid Carbide Super FF Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• Ball End Mill: 0.5″ Dia, 1″ LOC, 2 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: GCM7002GF AC830P, Solid Carbide Super FF Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• SNMG433EEG AC8025P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Jobber Length Drill Bit: 0.302″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• SNMG433ESX AC8025P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Grooving Insert: GCM7004GG AC830P, Solid Carbide Super FF Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• SNMG433ESE AC8025P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Grooving Insert: GCM7004GL AC830P, Solid Carbide Super FF Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND
• SNMG431EEG AC8015P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• SNMG431EEF AC8015P Carbide Turning Insert Absotech Finish, 1/2″ Long, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 90° Included Angle, Series AC8000P
• Grooving Insert: GCM7008MG AC830P, Solid Carbide Super FF Finish, Neutral, 7 mm Cutting Width, 25 mm Max Depth, Series GND