Products

• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• White Double-Sided Foam Tape: 1″ Wide, 5 yd Long, 25 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 0.093″ Dia, 0.074″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 0.05″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GCM6004GA H10, Solid Carbide Uncoated, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 0.078″ Dia, 1/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: TNMG666RP, High Temperature Alloy AlTiN Finish, 0.7500″ Long, 0.0938″ Corner Radius, N/A Series KENLOC
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Chamfer Mill: 6 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 5/8" Dia, 1-5/8" LOC, 0.0900" Radius, 7 Flute, Solid Carbide
• Corner Radius End Mill: 1/8″ Dia, 0.1″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.5″ Dia, 2 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 45 ° Helix, Uncoated, Single End, Series 2015
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GMM4020040V PR905, Solid Carbide TiAlN Finish, Neutral, 4 mm Cutting Width, 11 mm Max Depth, Series KGM
• Compression Spring: 2.174″ OD, 6″ Free Length 0.207″ Wire Dia, 100.608 lb Max Load, 36.861 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.5″ Dia, 3 Flute, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, Uncoated, Single End, Series 2045
• Roughing End Mills; Mill Diameter (Inch): 1/4; Mill Diameter (Decimal Inch): 0.2500; Number of Flutes: 4; Pitch: Coarse; Length of Cut (Inch): 5/8; Length of Cut (Decimal Inch): 0.6250; Shank Diameter (Inch): 0.3750; 3/8; Shank Diameter (mm): 0.3750; Shan
• Square End Mill: 1/2'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 1025 & Alumigator
• Compression Spring: 2.174″ OD, 4.75″ Free Length 0.225″ Wire Dia, 125.093 lb Max Load, 64.698 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Jobber Length Drill Bit: 0.5118″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 3/16″ Shank Dia, 45 ° Helix, AlCrN Coated, Centercutting, Series XPR
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• 90° 6-3/4″ OAL Cobalt Spotting Drill Bright/Uncoated, 1-3/8″ Flute Length, 1/2″ Shank Diam
• Duct Tape: 1″ Wide, 2.6 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Glass Cloth Tape; Width (Inch): 2; Material Type: Aluminum; Glass Cloth; Color: Silver; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 6.8000; Tensile Strength (Lb./Inch): 100.00; Maximum Operating Temperature (F): 500.000
• Square End Mill: 3/16'' Dia, 15/64'' LOC, 3/16'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5-LN
• Compression Spring: 1.41″ OD, 9″ Free Length 242.777 lb Max Load, 134.067 lb/in Spring Rate, Stainless Steel
• Duct Tape: 72 mm Wide, 10 mil Thick, Polyethylene Cloth Rubber Adhesive, 27 lb/in Tensile Strength
• Compression Spring: 1.351″ OD, 5.25″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 17.541 lb/in Spring Rate, Music Wire
• Turning Insert: RCGX565S1030 KYHK15B, Ceramic AlTiN Finish, Neutral, 5/8″ Inscribed Circle, N/A Round, Series RCGX
• Polyester Film Tape: 3/4″ Wide, 72 yd Long, 2 mil Thick 329.9 Lb/In Tensile Strength, Acrylic Adhesive, -99.4 to 500 ° F
• Turning Insert: RCGX565S6015 KYHK15B, Ceramic AlTiN Finish, Neutral, 5/8″ Inscribed Circle, N/A Round, Series RCGX
• Compression Spring: 1.645″ OD, 4.5″ Free Length 0.135″ Wire Dia, 55.744 lb Max Load, 19.93 lb/in Spring Rate, Music Wire
• Turning Insert: RCGX565P8015 KYHK15B, Ceramic AlTiN Finish, Neutral, 5/8″ Inscribed Circle, N/A Round, Series RCGX
• Impact Socket: 1/2″ Drive 6-Point
• Impact Socket: 1/2″ Drive 6-Point
• Compression Spring: 2.468″ OD, 9″ Free Length 210.08 lb Max Load, 45.552 lb/in Spring Rate, Music Wire
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Aluminum; Material: Aluminum; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Chucking Reamer: 0.6693″ Dia, 9″ OAL, 2-1/4″ Flute Length, Straight Shank, High Speed Steel 8 Flute
• Compression Spring: 1.41″ OD, 4.25″ Free Length 0.135″ Wire Dia, 64.57 lb Max Load, 26.9 lb/in Spring Rate, Music Wire
• 26mm Inside Diam, Headless LM Drill Bushing Liner 35mm Body Outside Diam, 36mm Overall Liner Length
• Impact Socket: 3/4″ Drive 6-Point
• Countersinks; Head Diameter (mm): 15.00; Included Angle: 90; Number Of Flutes: 3; Tool Material: Cobalt Steel; Cutting Direction: Right Hand; Minimum Cutting Diameter (mm): 3.20; Shank Diameter (mm): 10.00; Overall Length (mm): 60; Shank Type: Straight; T
• Chamfer Mill: 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 4; Length (yd): 5.00; Thickness (mil): 2.3000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 467
• Countersinks; Head Diameter (mm): 10.00; Included Angle: 90; Number Of Flutes: 3; Tool Material: Cobalt Steel; Cutting Direction: Right Hand; Minimum Cutting Diameter (mm): 2.50; Shank Diameter (mm): 6.00; Overall Length (mm): 50; Shank Type: Straight; To
• Impact Socket: 3/4″ Drive 6-Point
• SpyroTec 6.3mm Head Diam, 1.6mm Cut Diam, 5mm Shank Diam, 3 Flute 60° High Speed Steel Countersink TiAlN Finish, Single End, 5mm 3-Flat Shank, Right Hand Cut
• Impact Socket: 3/4″ Drive 6-Point
• Impact Socket: 3/4″ Drive 6-Point
• Turning Insert: TCGW121205TS-1 WBH10, Neutral, 60.0 &deg N/A Triangle,
• Turning Insert: TCGW121205TS-1 WBH20, Neutral, 60.0 &deg N/A Triangle,
• Compression Spring: 1.41″ OD, 4.5″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 61.616 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Turning Insert: TCGW12121TS-1 WBH20, Neutral, 60.0 &deg N/A Triangle,
• Turning Insert: TCGW12121TS-1 WBH10, Neutral, 60.0 &deg N/A Triangle,
• Chucking Reamer: 0.1024″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Kyocera NDCW 322FRX KW10 Grade Uncoated Carbide, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (N) Non-Ferrous Metals and (K) Gray Cast Iron, (S) Titanium Alloy
• Jobber Length Drill Bit: 0.2795″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Square End Mill: 3/64'' Dia, 9/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.2913″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Boring Bar
• Compression Spring: 0.94″ OD, 2.125″ Free Length 0.098″ Wire Dia, 30.355 lb Max Load, 30.493 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.315″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 3 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1-1/4" Dia, 2" LOC, 0.0600" Radius, 5 Flute, Solid Carbide
• Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC, 0.1200" Radius, 7 Flute, Solid Carbide
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 3 Flute, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 3/8″ Dia, 0.57″ LOC, 0.05″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Square End Mill: 5/64" Dia, 1/4" LOC, 4 Flute, Solid Carbide
• Corner Radius End Mill: 0.062″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/16″ Dia, 0.2″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.2″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Grooving Insert: GE200010A KW10, Solid Carbide Co & WC Finish, Right Hand, 2 mm Cutting Width, 1.5 mm Max Depth, Series SIGE
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 40 ° Helix, AlTiN+ Coated, Corner Radius End, Centercutting, Series 6/44
• Corner Radius End Mill: 1/4″ Dia, 1/4″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.2″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 0.57″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Ball End Mill: 4 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated
• Turning Insert: SNMM866TU T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Spiral Flute Tap: M2 x 0.40, Metric, 2 Flute, 1.5-2 P, 6H Class of Fit, HSS-E, Bright/Uncoated Right Hand Flute, Right Hand Thread, D3
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Turning Insert: SNMM866TRS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Replaceable Drill Tips: IDI.610SG IC908, 0.6100" Dia, 15.49 mm Dia, 140 deg Point, IC908
• Turning Insert: SNMM866TUS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Ball End Mill: 0.3125″ Dia, 4 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Turning Insert: SNMM868TUS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.1260″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Corner Radius End Mill: 5/16″ Dia, 7/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Turning Insert: SNMM866TRS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Turning Insert: SNMM866TUS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMM
• Grooving Insert: SCIR0.059 IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 1.5 mm Cutting Width, 1.8 mm Max Depth, Series Swisscut
• Jobber Length Drill Bit: 0.3319″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 652
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Milling Insert: WAK15, Solid Carbide N/A Finish,
• Grooving Insert: SCIR0.0787 IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 2 mm Cutting Width, 8 mm Max Depth, Series Swisscut
• Milling Insert: WKP25S, Solid Carbide N/A Finish,
• Grooving Insert: SCIR0.0984 IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 2.5 mm Cutting Width, 10 mm Max Depth, Series Swisscut
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Spiral Flute Tap: M2 x 0.40, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D3 & D4,Series 0393
• Corner Radius End Mill: 5/16″ Dia, 7/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, DLC Coated, Corner Radius End, Centercutting, Series Flash Solid
• Compression Spring: 0.823″ OD, 8.5″ Free Length 0.125″ Wire Dia, 65.649 lb Max Load, 24.257 lb/in Spring Rate, Stainless Steel
• Milling Insert: WKP35G, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Square End Mill: 1/64'' Dia, 1/16'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 5/16″ Dia, 7/8″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• GN352-60-40-M10-S-70 RUBBER BUMPER
• Jobber Length Drill Bit: 0.2756″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 50 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM4F
• Square End Mill: 0.024'' Dia, 0.072'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Square End Mill: 0.09'' Dia, 0.45'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.88″ OD, 3″ Free Length 0.207″ Wire Dia, 115.379 lb Max Load, 102.864 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Boring Bar: 0.23″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL
• Milling Insert: HDHN070408ER, KCK20B, Solid Carbide N/A Finish,
• Compression Spring: 1.998″ OD, 4.75″ Free Length 0.177″ Wire Dia, 72.19 lb Max Load, 31.07 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.024'' Dia, 0.192'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Tapered End Mill: 45 ° per Side, 0.04″ Small Dia, 0.148″ LOC, 2 Flutes, Solid Carbide, Ball End 5/16″ Shank Dia, 2-1/2″ OAL, Uncoated, Series Runner Cutters
• Square End Mill: 1/8'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, Straight Flute, 0 ° Helix, RH Cut, RH Flute
• 12″ Long, 1/100, 1/64, 1/50, 1/32″ Graduation, Flexible Steel Rule 16R Graduation Style, 1/2″ Wide, Silver, Satin Chrome Finish
• Glass Cloth Tape; Width (Inch): 2; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Duct Tape: 1/2″ Wide, 4 mil Thick, Aluminum Foil Acrylic Adhesive, 16 lb/in Tensile Strength
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spiral Flute Tap: M8 x 1.00, Metric, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D5, Series 347
• Spiral Flute Tap: M8 x 1.25, Metric, 3 Flute, Modified Bottoming, High Speed Steel-E, V Finish Right Hand Flute, Right Hand Thread, D5, Series 347
• Brackets; Type: Angle Bracket; Length (mm): 55.00; Width (mm): 36.50; Height (mm): 55.0000; Load Capacity (Lb.): 18.000; Finish/Coating: Satin; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.02″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 36 ° Helix, EXO Coated, Corner Radius End, Series VGM7
• Compression Spring: 0.881″ OD, 8.5″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 20.729 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.939″ OD, 3″ Free Length 0.207″ Wire Dia, 112.083 lb Max Load, 97.172 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, 2-3 P, High Speed Steel-E, TiN Finish 4″ OAL, Right Hand Flute, Right Hand Thread, Series 4566
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 2 mm Cutting Width, 4 mm Max Depth
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 1 mm Cutting Width, 3 mm Max Depth
• Turning Insert: VPGT1003015-FR TIALN+, Solid Carbide TiAlN Finish, Right Hand, 1/4″ Inscribed Circle, 0.0059″ Corner Radius, 35.0 &deg N/A Diamond, Series VPGT
• Compression Spring: 2.174″ OD, 3.75″ Free Length 0.192″ Wire Dia, 82.561 lb Max Load, 47.029 lb/in Spring Rate, Stainless Steel
• Turning Insert: VPGT1003015-FL TIALN+, Solid Carbide TiAlN Finish, Left Hand, 1/4″ Inscribed Circle, 0.0059″ Corner Radius, 35.0 &deg N/A Diamond, Series VPGT
• Compression Spring: 1.586″ OD, 5.75″ Free Length 0.162″ Wire Dia, 71.102 lb Max Load, 26.957 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.152″ Dia, 2-1/2″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Chucking Reamer: 23/64″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Jobber Length Drill Bit: 0.1772″ Dia, 118 °, Solid Carbide Bright/Uncoated, 2.758″ OAL, Right Hand Cut, Straight-Cylindrical Shank, Series D33M
• 120° 6mm Diam 66mm OAL High Speed Steel Spotting Drill Bright/Uncoated, 16mm Flute Length, 6mm Shank Diam, RH Cut, Series 556
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, AlCrN Coated, Centercutting, Series XPR
• Grooving Insert: TQJJ TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.079″ Cutting Width, Series TQJ20
• Grooving Insert: TQJJ TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.079″ Cutting Width, Series TQJ20
• Grooving Insert: TQJJ TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.039″ Cutting Width, Series TQJ20
• Grooving Insert: TQJJ TT4430, Solid Carbide AlTiCrN Finish, Right Hand, 0.059″ Cutting Width, Series TQJ20
• Compression Spring: 2.056″ OD, 8.5″ Free Length 173.133 lb Max Load, 57.774 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TQJJ TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.039″ Cutting Width, Series TQJ20
• Compression Spring: 1.175″ OD, 4″ Free Length 0.177″ Wire Dia, 118.221 lb Max Load, 105.115 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TQJJ TT4430, Solid Carbide AlTiCrN Finish, Left Hand, 0.059″ Cutting Width, Series TQJ20
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Left Hand Cut, Series 284
• Spiral Flute Tap: 1/2-20, UNF, 4 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Spiral Point Tap: 7/16-14, UNC, 3 Flutes, Plug, 2B, HSS-E, Black Oxide Finish 1.614″ Thread Length, 3.937″ OAL, Right Hand
• Ball End Mill: 0.1″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 0.881″ OD, 9″ Free Length 0.098″ Wire Dia, 41.442 lb Max Load, 8.612 lb/in Spring Rate, Music Wire
• RPGX45T00420KXW1 KXW1 Ceramic Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0″ Corner Radius, 0.315″ Thick, Round
• Compression Spring: 1.351″ OD, 5.5″ Free Length 0.125″ Wire Dia, 54.313 lb Max Load, 16.705 lb/in Spring Rate, Music Wire
• Spiral Point Tap: 7/16-20, UNF, 3 Flutes, Plug, 2B, HSS-E, Black Oxide Finish 1.614″ Thread Length, 3.937″ OAL, Right Hand
• CNG452T00420KXW1 KXW1 Ceramic Turning Insert Uncoated, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 5/16″ Thick, 80° Diamond
• Compression Spring: 1.41″ OD, 4.5″ Free Length 0.135″ Wire Dia, 64.57 lb Max Load, 25.311 lb/in Spring Rate, Music Wire
• Compression Spring: 1.645″ OD, 4.75″ Free Length 0.135″ Wire Dia, 55.744 lb Max Load, 18.818 lb/in Spring Rate, Music Wire
• Endless, Type 5 Web Sling: 4' Long, 1" Wide, 6200 lb Vertical Capacity, Nylon
• Lockset Accessories; Type: SFIC Pin Segment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: SFIC Pin Segment; For Use With: Best
• Endless, Type 5 Web Sling: 5' Long, 1" Wide, 6200 lb Vertical Capacity, Nylon
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9026; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Lockset Accessories; Type: SFIC Pin Segment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: SFIC Pin Segment; For Use With: Best
• Compression Spring: 1.998″ OD, 3.75″ Free Length 0.192″ Wire Dia, 89.463 lb Max Load, 53.924 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M12 x 1.75, Metric Coarse, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, Steam Oxide Finish 0.64″ Thread Length, 3.375″ OAL, Right Hand Flute, Right Hand Thread, D6, Series 717
• Grooving Insert: TDXTT CT3000, Cermet Uncoated, Neutral, 0.197″ Cutting Width, Series TDXT-E
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.12'' Dia, 5/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Ball End Mill: 0.04″ Dia, 0.281″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Square End Mill: 1/4'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Security Truck: 3,200 lb Capacity
• 90° 1/4″ Diam 2-1/2″ OAL 2-Flute Solid Carbide Spotting Drill Bright/Uncoated, 3/8″ Flute Length, 1/4″ Shank Diam
• Tapered End Mill: 22.5 ° per Side, 0.02″ Small Dia, 0.135″ LOC, 2 Flutes, Solid Carbide, Ball End 1/8″ Shank Dia, 1-1/2″ OAL, AlTiN Finish, Series Runner Cutters
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Point Tap: M1.6, Metric & DIN 371, 2 Flutes, Plug, 6H, HSS-E, TiN Finish 7 mm Thread Length, 45 mm OAL, Right Hand, Series TC216
• Milling Insert: XDKT 11T316ER-F40 CTCM245, CTCM245, Solid Carbide N/A Finish,
• Ball End Mill: 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Turning Insert: 1QP-CCMT21.51 DX110, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Lockset Accessories; Type: SFIC Pin Segment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: SFIC Pin Segment; For Use With: Best
• Turning Insert: 1QP-CCMT32.51 DX110, Polycrystalline Diamond Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: 1QP-CNMM430.5 DX110, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: 1QP-CNMM431 DX110, Polycrystalline Diamond Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMM
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.055″ Dia, 0.065″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.41″ OD, 5.5″ Free Length 0.125″ Wire Dia, 52.147 lb Max Load, 15.624 lb/in Spring Rate, Music Wire
• Square End Mill: 1/4'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.645″ OD, 3.5″ Free Length 0.148″ Wire Dia, 71.988 lb Max Load, 35.929 lb/in Spring Rate, Music Wire
• Compression Spring: 2.82″ OD, 5.75″ Free Length 128.597 lb Max Load, 49.769 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.25″ Dia, 0.375″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.115″ Dia, 9/64″ LOC, 1/32″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.2500″ Dia, 0.7500″ LOC, 3 Flute, Solid Carbide 40 &deg N/A Zplus Coated, Series End Mills for Aluminum - 3 Flute - Ball - 40 ™ Helix - Variable Pitch
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.06″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.047″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Spiral Flute Tap: #2-64, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.276″ Thread Length, 1.772″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C300
• Corner Radius End Mill: 0.085″ Dia, 0.1″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.998″ OD, 8.5″ Free Length 177.773 lb Max Load, 61.293 lb/in Spring Rate, Stainless Steel
• Woodruff Keyseat Cutter: 0.187″ Cut Dia, 0.125″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 4 Teeth, Solid Carbide, TiB2 Finish
• Square End Mill: 0.059'' Dia, 0.295'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• 3/16″ Head Diam, 3/16″ Shank Diam, 82° Cobalt Countersink 1-3/8″ OAL, Single End, Straight Shank, Right Hand Cut
• Turning Insert: 2QP-CNMA433-W BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMA
• Chucking Reamer: 0.1395″ Dia, 3″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• SpyroTec 12.5mm Head Diam, 3.2mm Cut Diam, 8mm Shank Diam, 3 Flute 60° High Speed Steel Countersink TiAlN Finish, Single End, 8mm 3-Flat Shank, Right Hand Cut
• Chucking Reamer: 0.1545″ Dia, 3″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Aluminum; Material: Aluminum; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Chucking Reamer: 0.1585″ Dia, 3″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• 1/16″ Diam 270° Wrap Angle 0.0529″ LOC 2-Flute Uncoated Undercut End Mill 1/8″ Shank Diam, 1-1/2″ OAL, 0.0313″ Radius, Solid Carbide
• 1/4″ Head Diam, 1/4″ Shank Diam, 4 Flute 100° Solid Carbide Countersink 2″ OAL, Straight Shank
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• 1/16″ Diam 270° Wrap Angle 0.053″ LOC 2-Flute Uncoated Undercut End Mill 1/8″ Shank Diam, 1-1/2″ OAL, 0.031″ Radius, Solid Carbide
• Chucking Reamer: 0.1235″ Dia, 3″ OAL, 3/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Grooving Insert: GX34CE4 WSM33S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Corner Radius End Mill: 0.062″ Dia, 0.312″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Grooving Insert: GX34GD6 WSM33S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Spiral Flute Tap: M3.50 x 0.60, Metric Coarse, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal, TiCN Finish 0.3″ Thread Length, 2″ OAL, Right Hand Flute, Right Hand Thread, D3, Series 719
• Grooving Insert: GX34CF5 WSM43S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Compression Spring: 0.823″ OD, 4.25″ Free Length 0.135″ Wire Dia, 105.909 lb Max Load, 81.037 lb/in Spring Rate, Music Wire
• Grooving Insert: GX34CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Compression Spring: 0.881″ OD, 3.25″ Free Length 0.085″ Wire Dia, 21.934 lb Max Load, 12.853 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.016″ OD, 4″ Free Length 0.12″ Wire Dia, 48.616 lb Max Load, 28.53 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.058″ OD, 3.5″ Free Length 0.085″ Wire Dia, 18.42 lb Max Load, 9.018 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.047″ Dia, 0.141″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Single End
• Spiral Flute Tap: #4-40, UNC, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, H3 & H4, Series 0391