Products

• Turning Insert: VNGA332 AB30, Ceramic Al2O3 & TiCN Finish, Neutral, 0.6540″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Corner Radius End Mill: 0.176″ Dia, 0.21″ LOC, 1/32″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, TiB2 Coated, Corner Radius End
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9377; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Corner Radius End Mill: 0.078″ Dia, 13/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.375″ Dia, 1″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• S-3 Machine Oil: ISO 3, 55 gal
• Turning Insert: SCMT 12 04 08-UR 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Square, Series SCMT-UR
• 90° 3/16″ Diam 4″ OAL 2-Flute Solid Carbide Spotting Drill Bright/Uncoated, 5/8″ Flute Length, 3/16″ Shank Diam
• Chucking Reamer: 13/64″ Dia, 5″ OAL, 1-1/4″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Grooving Insert: GX34CF5 WSM33S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Turning Insert
• Grooving Insert: GX34GD6 WSM23S, Solid Carbide Al Finish, Neutral, 0.157″ Cutting Width, Series Tiger-tec Silver
• Ball End Mill: 0.1875″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: GCM8002GF AC530U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8004GF AC830P, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8002GF AC830P, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• S-2 Machine Oil: ISO 2, 5 gal
• Grooving Insert: GCM8040RG AC830P, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8004ML AC830P, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• 120° 6″ OAL High Speed Steel Spotting Drill Bright/Uncoated, 3/4″ Flute Length, 1/4″ Shank Diam, RH Cut, Series SPL-120°
• Grooving Insert: GCM8004GG AC830P, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8008MG AC830P, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8004ML AC520U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8008MG AC520U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Turning Insert: CNGA432FN_K3-Q CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Fluid: GX Cool 2192USM, Liquid, 55 gal Drum
• Grooving Insert: GCM8004GG AC520U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GCM8002GF AC520U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GCM8004GF AC520U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Chucking Reamer: 0.0405″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Grooving Insert: GCM8004ML AC425K, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Press Fit Headless Drill Bushing: P, 7/8″ ID, 1-1/8″ OD 1-1/4″ OAL, Carbon Steel
• Grooving Insert: GCM8040RG AC425K, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 4.12; Overall Length (mm): 4.12; Material: Metal; Projection: 1.629 in; Finish/Coating: Oil Rubbed Bronze; Maximum Load Capacity: 5.00; Minimum Order Quantity: Metal; Material:
• Chucking Reamer: 0.0425″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Grooving Insert: GCM8008MG AC425K, Solid Carbide Super FF Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8004ML AC530U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8004GF AC530U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Grooving Insert: GCM8004GG AC530U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/4″ OAL, 3/16″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Grooving Insert: GCM8004GL AC530U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Compression Spring: 2.115″ OD, 7.5″ Free Length 0.225″ Wire Dia, 128.373 lb Max Load, 42.835 lb/in Spring Rate, Stainless Steel
• Grooving Insert: GCM8008MG AC530U, Solid Carbide Super ZX Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series GND
• Chamfer Mill: 2 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Duct Tape: 3/4″ Wide, 2.6 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Ball End Mill: 0.031″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 3; Length (yd): 5.00; Thickness (mil): 5.2000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 468
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 11.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Dec
• Glass Cloth Tape; Width (Inch): 3; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Turning Insert: CNMM 19 06 16-WR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series CNMM-WR
• Turning Insert: CNMM 19 06 16-WR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series CNMM-WR
• Grooving Insert: TDXTT K10, Solid Carbide Uncoated, Neutral, 0.315″ Cutting Width, Series TDXT-E
• Compression Spring: 0.94″ OD, 2.625″ Free Length 0.092″ Wire Dia, 25.581 lb Max Load, 19.254 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.03″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.821″ OD, 4.75″ Free Length 0.225″ Wire Dia, 147.595 lb Max Load, 90.855 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 8″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 10.027 lb/in Spring Rate, Music Wire
• Square End Mill: 0.013'' Dia, 0.039'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.02″ Dia, 0.12″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 1.116″ OD, 3.5″ Free Length 0.192″ Wire Dia, 152.428 lb Max Load, 201.652 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 6.5″ Free Length 0.112″ Wire Dia, 53.272 lb Max Load, 15.77 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 9″ Free Length 0.105″ Wire Dia, 33.439 lb Max Load, 5.555 lb/in Spring Rate, Music Wire
• Double Angle Milling Cutter: 60 °, 1/8″ Cut Dia, 0.046″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 4 Teeth
• Ball End Mill: 0.118″ Dia, 0.625″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Duct Tape: 3″ Wide, 7.2 mil Thick, Aluminum Foil Acrylic Adhesive, 59 lb/in Tensile Strength
• Compression Spring: 1.351″ OD, 2.75″ Free Length 0.162″ Wire Dia, 111.271 lb Max Load, 93.292 lb/in Spring Rate, Music Wire
• Compression Spring: 1.351″ OD, 2.25″ Free Length 0.177″ Wire Dia, 141.942 lb Max Load, 169.477 lb/in Spring Rate, Music Wire
• Chucking Reamer: 0.1969″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Ball End Mill: 0.109″ Dia, 0.57″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 1.41″ OD, 3.5″ Free Length 0.148″ Wire Dia, 83.302 lb Max Load, 46.438 lb/in Spring Rate, Music Wire
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Black Industrial; Overall Length (Decimal Inch): 3.0200; Material: Steel
• Compression Spring: 1.469″ OD, 4.5″ Free Length 0.135″ Wire Dia, 62.105 lb Max Load, 23.692 lb/in Spring Rate, Music Wire
• Chamfer Mill: 0.25″ Dia, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Bright/Uncoated
• Compression Spring: 1.469″ OD, 2.625″ Free Length 0.162″ Wire Dia, 102.916 lb Max Load, 83.84 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, TiB2 Coated, Corner Radius End, Centercutting
• Compression Spring: 1.469″ OD, 2.75″ Free Length 0.162″ Wire Dia, 102.916 lb Max Load, 79.52 lb/in Spring Rate, Music Wire
• Door Closer Accessories; For Use With: SEM7810 Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: SEM7810 Series Door Closers
• Chucking Reamer: 0.1575″ Dia, 3″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Door Closer Accessories; For Use With: SEM7810 Series Door Closers; Finish/Coating: Sprayed Aluminum; For Use With: SEM7810 Series Door Closers
• Chucking Reamer: 0.088″ Dia, 2″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Compression Spring: 1.469″ OD, 2.125″ Free Length 0.177″ Wire Dia, 131.397 lb Max Load, 152.67 lb/in Spring Rate, Music Wire
• Door Closer Accessories; For Use With: LCN 2210 Series Door Closers; Body Length: 13 ; Finish/Coating: Aluminum; For Use With: LCN 2210 Series Door Closers
• Door Closer Accessories; For Use With: LCN 2010 Series Door Closers; Body Length: 1 ; Finish/Coating: Aluminum; For Use With: LCN 2010 Series Door Closers
• Chamfer Mill: 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Compression Spring: 0.999″ OD, 6″ Free Length 0.148″ Wire Dia, 85.888 lb Max Load, 45.775 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.248″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Compression Spring: 0.999″ OD, 5″ Free Length 0.162″ Wire Dia, 108.601 lb Max Load, 82.868 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.999″ OD, 5″ Free Length 0.125″ Wire Dia, 72.088 lb Max Load, 31.688 lb/in Spring Rate, Music Wire
• Compression Spring: 2.35″ OD, 9″ Free Length 220 lb Max Load, 49.746 lb/in Spring Rate, Music Wire
• Hook & Loop; Shape: Rectangle; Tape Width: 1.00 in; Color: White; Piece Length (Inch): 2; Component Type: Hook & Loop; Number Of Pieces: 100.000
• Duct Tape: 2″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 35.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 61.0000; Finish Coating: TiCN; Serie
• Polyimide Film Tape: 1″ Wide, 36 yd Long, 3.5 mil Thick 50 Lb/In Tensile Strength, Silicone Adhesive, -40 to 500 ° F
• Turning Insert: CNMG190612-UR YG3030, Solid Carbide TiCN & Al2O3 Finish, 0.4720″ Long, 3/4″ Inscribed Circle, N/A Series CNMG
• Ball End Mill: 0.1875″ Dia, 0.375″ LOC, 4 Flute, Solid Carbide 3-1/8″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Internal Boring Bar: 0.1575″ Min Bore, 0.8661″ Max Depth, Right Hand Cut, Carbide 1.5748″ OAL, 0.0039″ Corner Radius
• Compression Spring: 0.881″ OD, 2.25″ Free Length 0.098″ Wire Dia, 32.259 lb Max Load, 32.1 lb/in Spring Rate, Stainless Steel
• Internal Boring Bar: 0.1575″ Min Bore, 0.8661″ Max Depth, Left Hand Cut, Carbide 1.5748″ OAL, 0.0039″ Corner Radius
• Turning Insert: SNMG866EMU AC5005S, Solid Carbide Absotech Finish, 1.0000″ Long, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Series AC5005S
• Compression Spring: 0.881″ OD, 1.25″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 171.012 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.058″ OD, 2.875″ Free Length 0.092″ Wire Dia, 22.86 lb Max Load, 14.517 lb/in Spring Rate, Stainless Steel
• Turning Insert: SNMG866EEM AC5005S, Solid Carbide Absotech Finish, 1.0000″ Long, 1″ Inscribed Circle, 0.0945″ Corner Radius, 90.0 &deg N/A Series AC5005S
• Compression Spring: 1.351″ OD, 2.125″ Free Length 0.125″ Wire Dia, 41.475 lb Max Load, 40.674 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.293″ OD, 8″ Free Length 0.25″ Wire Dia, 318.621 lb Max Load, 223.94 lb/in Spring Rate, Music Wire
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TQC34
• Compression Spring: 2.291″ OD, 9″ Free Length 225.314 lb Max Load, 52.144 lb/in Spring Rate, Music Wire
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.094″ Cutting Width, Series TQC34
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.88″ OD, 4.75″ Free Length 0.177″ Wire Dia, 76.495 lb Max Load, 34.256 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Compression Spring: 1.939″ OD, 3.75″ Free Length 0.192″ Wire Dia, 92.038 lb Max Load, 56.727 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Drill Mill: 3/16″ Dia, 5/8″ LOC, 4 Flutes, 82 ° Point, Solid Carbide 2″ OAL, 3/16″ Shank Dia, AlTiN Nano Finish
• Polytetrafluroethylene Film Tape: 2″ Wide, 5 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• UHMW Film Tape: 2″ Wide, 5 yd Long, 3 mil Thick 18 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Ball End Mill: 0.25″ Dia, 3 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 45 ° Helix, DLC Coated, Single End, Series Flash Solid
• Ball End Mill: 0.25″ Dia, 1.5″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.375″ Dia, 1.75″ LOC, 2 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Swivel Top Plate Caster: Rubber, 10″ Wheel Dia, 3-1/2″ Wheel Width, 265 lb Capacity, 11-3/4″ OAH 3.9375″ Plate Length, 4.5″ Plate Width, No Brake
• Compression Spring: 0.999″ OD, 5.25″ Free Length 0.125″ Wire Dia, 72.088 lb Max Load, 30.104 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, 2-3 P, 6HX Class of Fit, Powdered Metal & High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, D4
• Compression Spring: 1.528″ OD, 6″ Free Length 48.29 lb Max Load, 12.643 lb/in Spring Rate, Music Wire
• Compression Spring: 2.468″ OD, 9.5″ Free Length 145.941 lb Max Load, 37.347 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 8.5″ Free Length 0.148″ Wire Dia, 77.215 lb Max Load, 16.097 lb/in Spring Rate, Music Wire
• 13/16 Inch Long, Retractable Soft-Close Recessed Hook 20.00 Load Capacity
• Turning Insert: 2QP-DNGA431-L BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 1 mm Cutting Width, 2 mm Max Depth, Series GBA
• Corner Radius End Mill: 7/16″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 7/16″ Shank Dia, 38 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GBA32N PR1215, Solid Carbide Megacoat, Right Hand, 0.58 mm Cutting Width, 2 mm Max Depth, Series GBA
• Corner Radius End Mill: 0.1969″ Dia, 0.2362″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 0.023'' Dia, 0.035'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.351″ OD, 3.75″ Free Length 0.105″ Wire Dia, 25.906 lb Max Load, 11.993 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.006'' Dia, 0.009'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.093″ Dia, 3/4″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.351″ OD, 1.875″ Free Length 0.192″ Wire Dia, 177.359 lb Max Load, 301.524 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.078″ Dia, 5/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.031″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Flute Tap: #10-24, UNC, 3 Flute, Plug, 2B Class of Fit, High Speed Steel, TiN Finish 0.875″ Thread Length, 2.375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series SFGP
• Ball End Mill: 0.025″ Dia, 0.075″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Spiral Flute Tap: #8-32, UNC, 3 Flute, Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish 0.75″ Thread Length, 2.125″ OAL, Right Hand Flute, Right Hand Thread, H3, Series SFGP
• Corner Radius End Mill: 0.1″ Dia, 0.8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.09″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series CoroMill Dura
• Spiral Flute Tap: #8-32, UNC, 3 Flute, Plug, 2B Class of Fit, High Speed Steel, TiN Finish 0.75″ Thread Length, 2.125″ OAL, Right Hand Flute, Right Hand Thread, H3, Series SFGP
• Pipe Wrench: 6″ OAL, Steel 1-3/4″ Max Pipe Capacity
• Corner Radius End Mill: 0.093″ Dia, 3/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish 0.875″ Thread Length, 2.375″ OAL, Right Hand Flute, Right Hand Thread, H3, Series SFGP
• Square End Mill: 0.024'' Dia, 0.036'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: #6-32, UNC, 2 Flute, Plug, 2B Class of Fit, High Speed Steel, TiN Finish 0.6875″ Thread Length, 2″ OAL, Right Hand Flute, Right Hand Thread, H3, Series SFGP
• Chamfer Mills; Cutter Head Diameter (Decimal Inch): 0.2500; Number Of Flutes: 3; End Type: Single; Included Centerline Angle: 45; Included Side Angle: 45; Shank Diameter (Decimal Inch): 0.2500; Shank Diameter (Inch): 1/4; Overall Length (Inch): 2-1/2; Ove
• Compression Spring: 1.41″ OD, 8″ Free Length 0.112″ Wire Dia, 38.417 lb Max Load, 7.302 lb/in Spring Rate, Music Wire
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Screw Machine Length Drill Bit: 0.3228″ Dia, 120 °, Vanadium High Speed Steel TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1100
• Screw Machine Length Drill Bit: 0.3268″ Dia, 120 °, Vanadium High Speed Steel TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 1100
• Corner Radius End Mill: 0.118″ Dia, 0.95″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.017″ Dia, 0.026″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.018″ Dia, 0.027″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 0.95 mm Cutting Width, 2 mm Max Depth, Series GBA
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Right Hand, 1.2 mm Cutting Width, 2 mm Max Depth, Series GBA
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 1.1 mm Cutting Width, 2 mm Max Depth, Series GBA
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.021″ Dia, 0.063″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Right Hand, 1.1 mm Cutting Width, 2 mm Max Depth, Series GBA
• Ball End Mill: 0.024″ Dia, 0.072″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 1.3 mm Cutting Width, 2 mm Max Depth, Series GBA
• Woodruff Keyseat Cutter: 0.1562″ Cut Dia, 0.031″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Double Angle Milling Cutter: 90 °, 1/8″ Cut Dia, 0.073″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, Uncoated, 4 Teeth
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Right Hand, 1.3 mm Cutting Width, 2 mm Max Depth, Series GBA
• Double Angle Milling Cutter: 90 °, 1/16″ Cut Dia, 1/32″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, AlTiN Coated, 2 Teeth
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Right Hand, 1.6 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Double Angle Milling Cutter: 45 °, 5/64″ Cut Dia, 0.039″ Cut Width, 1/8″ Shank Dia, Solid Carbide 1-1/2″ OAL, AlTiN Coated, 2 Teeth
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 1.45 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Ball End Mill: 0.016″ Dia, 0.024″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Flute Tap: 1/2-13, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, PM Cobalt, TiAlN Top Finish 10.8″ Thread Length, 4.331″ OAL, Right Hand Flute, Right Hand Thread, H5, Series E810
• Jobber Length Drill Bit: 0.0984″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Woodruff Keyseat Cutter: 0.1562″ Cut Dia, 0.125″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Grooving Insert: GBA32N PR1215, Solid Carbide Megacoat, Right Hand, 1.98 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Jobber Length Drill Bit: 0.1142″ Dia, 130 °, Cobalt TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 658
• Ball End Mill: 0.017″ Dia, 0.051″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 1.25 mm Cutting Width, 2 mm Max Depth, Series GBA
• Screw Machine Length Drill Bit: 0.0906″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Right Hand, 0.95 mm Cutting Width, 2 mm Max Depth, Series GBA
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 2.25 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Jobber Length Drill Bit: 0.0781″ Dia, 130 °, Cobalt TiN Finish, 1.9291″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 1.7 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Screwdriver Sets; Screwdriver Types Included: Keystone, Cabinet; Container Type: Vinyl Pouch; Tether Style: Not Tether Capable
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 1.6 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Boring Bar
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 1.4 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 1.45 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 0.95 mm Cutting Width, 2 mm Max Depth, Series GBA
• Spiral Flute Tap: M12 x 1.25, DIN, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.575″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• Spiral Flute Tap: M12 x 1.75, DIN & ANSI, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.575″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 0.75 mm Cutting Width, 2 mm Max Depth, Series GBA
• Ball End Mill: 0.016″ Dia, 0.048″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Flute Tap: M12 x 1.75, DIN, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.575″ Thread Length, 4.3307″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Right Hand, 3 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Door Handles; Type: Plastic Door Handles; Center to Center: 42.00; Center to Center: 1.650; Knob Material: Plastic; Length (Decimal Inch): 4.020; Length (mm): 102.00; Width (Decimal Inch): 4.1700; Width (mm): 106.00; Height (Inch): 4.02; Height (mm): 102.
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Right Hand, 1.7 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Right Hand, 1.45 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Right Hand, 1.4 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Right Hand, 1.25 mm Cutting Width, 2 mm Max Depth, Series GBA
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 1.57
• Compression Spring: 0.881″ OD, 6.75″ Free Length 0.112″ Wire Dia, 59.862 lb Max Load, 19.328 lb/in Spring Rate, Music Wire
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 20; Centercutting: No; Flute Type: Spiral; Number Of Flutes: 5; End Mill Material: Solid Carbide; Overall Length: 2.76
• Grooving Insert: GBA32 PR1215, Solid Carbide Megacoat, Left Hand, 2 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.012″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• SpyroTec 10.4mm Head Diam, 2.5mm Cut Diam, 6mm Shank Diam, 3 Flute 90° Cobalt Countersink TiAlN Finish, Single End, 6mm Shank Diam, Right Hand Cut
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 1.75 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 3 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Corner Radius End Mill: 0.109″ Dia, 0.163″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 1.7 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Spiral Point Tap: 5/8-11, UNC, 4 Flutes, Plug, 2BX, Slidur Finish 110 mm OAL, Right Hand, H6/H7, Series 4658
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Right Hand, 2.25 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GBA32 PR1625, Solid Carbide Megacoat Nano Finish, Left Hand, 2.25 mm Cutting Width, 2.5 mm Max Depth, Series GBA
• Corner Radius End Mill: 5/16″ Dia, 0.813″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 1/2″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 0.187″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.06″ Dia, 0.09″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.062″ Dia, 0.093″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.05″ Dia, 0.075″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.1″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Glass Cloth Tape; Width (Inch): 1/2; Material Type: PTFE; Color: Black; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 7.0000; Tensile Strength (Lb./Inch): 200.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperatur
• Ball End Mill: 0.093″ Dia, 0.139″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.078″ Dia, 0.117″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.078″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.095″ Dia, 0.142″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.118″ Dia, 0.95″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Jobber Length Drill Bit: 0.2441″ Dia, 130 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.062″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 3/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 5/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End