Products

• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CNGA433FN_A3 CTBS20U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: DNGA431FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: DNGA441FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Compression Spring: 2.291″ OD, 7″ Free Length 225.314 lb Max Load, 66.183 lb/in Spring Rate, Music Wire
• Turning Insert: CNGA4305TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.046″ Dia, 0.138″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.35″ OD, 3.75″ Free Length 0.192″ Wire Dia, 76.638 lb Max Load, 41.745 lb/in Spring Rate, Stainless Steel
• Turning Insert: DNGA432TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DNGA
• Compression Spring: 1.88″ OD, 6″ Free Length 0.162″ Wire Dia, 60.499 lb Max Load, 19.532 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.065″ Dia, 0.195″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: SCGW32.51FN_A4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 90.0 &deg N/A Square, Series SCGW
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CCGW32.52FN_A3 CTBS20U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Compression Spring: 1.469″ OD, 8.5″ Free Length 0.148″ Wire Dia, 60.148 lb Max Load, 14.957 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: CNGA431FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D7 & D8,Series 0393
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Gray Double-Sided Foam Tape: 1/2″ Wide, 25 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.3937″ Dia, 0.748″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Polyester Film Tape: 2″ Wide, 72 yd Long, 3.3 mil Thick 50 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• CNMG643-KM 3205 Carbide Turning Insert TiCN/AI2O3/TiN Finish, 18.14mm Long, 3/4″ Inscribed Circle, 3/64″ Corner Radius, 80° Diamond
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.095″ Dia, 0.143″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.065″ Dia, 0.098″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.704″ OD, 3.75″ Free Length 205.528 lb Max Load, 215.317 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 3/32'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.065″ Dia, 0.195″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Door Closer Accessories; For Use With: 1100 Series Industrial Door Closers; Body Length: 12; Finish/Coating: Aluminum Painted; For Use With: 1100 Series Industrial Door Closers
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: ONGX080620SNGP, KCK20B, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Temporary Structure Parts & Accessories; Type: Platform Tile; Width: 18; Width (Inch): 18
• Milling Insert: ONGX080620ENLE, KCK20B, Solid Carbide N/A Finish,
• Temporary Structure Parts & Accessories; Type: Platform Tile; Width: 18; Width (Inch): 18; EPP GSA Codes: AQ - CPG(Comprehensive Procurement Guidelines); Pre Consumer Recycled Content : 0; Total Recycled Content: 100; Post Consumer Recycled Content: 100
• Milling Insert: ONGX080630SNHB, KCK20B, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Temporary Structure Parts & Accessories; Type: Platform Tile; Width: 18; Width (Inch): 18
• Milling Insert: ONGX0806ANENLE, KCK20B, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.09″ Dia, 0.135″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill Head: 3/4″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XP
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.04″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: ONGX080620SNHB, KCK20B, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.174″ OD, 5.5″ Free Length 164.385 lb Max Load, 82.694 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M2.50 x, 0.45, M, Modified Bottoming, 6G Class of Fit, Cobalt, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5, Series B0503020
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.008″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.528″ OD, 8.5″ Free Length 0.207″ Wire Dia, 139.769 lb Max Load, 50.139 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.095″ Dia, 0.143″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.586″ OD, 8.5″ Free Length 0.207″ Wire Dia, 135.087 lb Max Load, 46.231 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 5/16'' Dia, 2-1/8'' LOC, 5/16'' Shank Dia, 4'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.012″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 5/8" Dia, 1-5/8" LOC, 0.0600" Radius, 7 Flute, Solid Carbide
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.12″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: KCGP3031 TN60, Cermet TiCN & NbC Finish, Right Hand, 0.79 mm Cutting Width, 1.27 mm Max Depth, Series CERA
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: KCGP3178 TN60, Cermet TiCN & NbC Finish, Right Hand, 4.52 mm Cutting Width, 3.8 mm Max Depth, Series CERA
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.095″ Dia, 0.285″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M3 x 0.50, Metric, 3 Flute, Semi-Bottoming, 6H + 0.1 Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D11 & D12, Series 4627
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.025″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 3/16″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Square End Mill: 13/32'' Dia, 1'' LOC, 7/16'' Shank Dia, 2-3/4'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute, Series 2010
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 3/8'' Dia, 1-1/2'' LOC, 3/8'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 1025 & Alumigator
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Glass Cloth Tape; Width (Inch): 1; Material Type: PTFE; Color: Light Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 6.8000; Tensile Strength (Lb./Inch): 290.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temper
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GMM6020300R TN90, Cermet Neutral, 6 mm Cutting Width, 30 mm Max Depth, Series KGM
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill Head: 3/16″ Dia, 3/8″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.246″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Screw Machine Length Drill Bit: 0.234″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Screw Machine Length Drill Bit: 0.136″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: APH730, Solid Carbide N/A Finish,
• Clear Double-Sided Polyester Film Tape: 1/2″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: GDFM5020CM PR1215, Solid Carbide Megacoat, Neutral, 5 mm Cutting Width, 32 mm Max Depth, Series KGD
• Corner Radius End Mill: 0.085″ Dia, 0.255″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.12″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CPMH322MV MC6025, Carbide
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: ROHX 1025R5-MR5 CTPP211, CTPP211, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.045″ Dia, 0.135″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: XOHX 122510-FM2 CTPP216, CTPP216, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: XOHX 122520-FM2 CTPP216, CTPP216, Solid Carbide N/A Finish,
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: 7/16-14, UNC, 3 Flute, Semi-Bottoming, 2B & 3B Class of Fit, Powdered Metal, Steam Oxide Finish 0.62″ Thread Length, 3.1563″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 799
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.178″ Dia, 1″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3″ Shank Dia, Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.351″ OD, 5.5″ Free Length 0.162″ Wire Dia, 82.615 lb Max Load, 38.023 lb/in Spring Rate, Stainless Steel
• Combo Drill & Countersink: 3/8, 3/8″ Body Dia, High Speed Steel TiCN Finish, 25/32″ Point Length, 2″ OAL, Right Hand Cut
• Corner Radius End Mill: 0.065″ Dia, 0.195″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.056″ OD, 7″ Free Length 249.222 lb Max Load, 81.772 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.526″ OD, 9″ Free Length 205.519 lb Max Load, 43.74 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.3″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.116″ OD, 4″ Free Length 0.177″ Wire Dia, 123.762 lb Max Load, 119.253 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.075″ Dia, 0.225″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.056″ OD, 6.25″ Free Length 0.162″ Wire Dia, 55.529 lb Max Load, 16.375 lb/in Spring Rate, Stainless Steel
• 90° 4-3/8″ OAL High Speed Steel Spotting Drill TiN Finish, 1-5/8″ Flute Length, 5/8″ Shank Diam, RH Cut, Series SPSG-90°
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.056″ OD, 4.75″ Free Length 0.177″ Wire Dia, 70.244 lb Max Load, 29.719 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.095″ Dia, 0.285″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.116″ OD, 8.5″ Free Length 0.207″ Wire Dia, 184.396 lb Max Load, 110.746 lb/in Spring Rate, Stainless Steel
• Spiral Point Tap: 1/4-20, UNC, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.15″ OAL, Left Hand, X, Series Rekord B
• Turning Insert: 1QP-CCGW451805 BX470, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 3.15″ OAL, Left Hand, X, Series Rekord B
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, 1.5-2 P, 6H Class of Fit, HSS-E, Bright/Uncoated Right Hand Flute, Right Hand Thread, D5
• Corner Radius End Mill: 0.1181″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: SNMG856THS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Spiral Flute Tap: M2.50 x, 0.45, Metric, 3 Flute, Semi-Bottoming, 7GX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4626
• Turning Insert: SNMG854THS T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0630″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Semi-Bottoming, 7GX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D7 & D8, Series 4626
• Turning Insert: SNMG856 T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: SNMG854THS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0630″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Grooving Insert: BA, Solid Carbide TiCN Finish, Neutral, 3 mm Cutting Width, 5 mm Max Depth, Series 25606
• Turning Insert: SNMG856THS T9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1″ Inscribed Circle, 0.0940″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Grooving Insert: BA, Solid Carbide Firex Finish, Neutral, 2 mm Cutting Width, 4 mm Max Depth, Series 25605
• Square End Mill: 5/32'' Dia, 9/16'' LOC, 3/16'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Insert: BA, Solid Carbide TiCN Finish, Neutral, 3 mm Cutting Width, 5 mm Max Depth, Series 25606
• Corner Chamfer End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, 0.0012″ Chamfer Width, Solid Carbide 2.28 mm OAL, Bright/Uncoated, Centercutting
• Grooving Insert: BA, Solid Carbide TiCN Finish, Neutral, 2.5 mm Cutting Width, 5 mm Max Depth, Series 25606
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Undercutting End Mills; Mill Diameter (Decimal Inch): 0.0400; Overall Length (Inch): 1-1/2; Radius: 0.0200; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 0.0938; Shank Diame
• Compression Spring: 1.4″ OD, 2.5″ Free Length 0.162″ Wire Dia, 112.571 lb Max Load, 103 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/4″ Dia, 1-1/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 38 ° Helix, nACRo Coated, Corner Radius End
• Undercutting End Mills; Mill Diameter (Decimal Inch): 0.0400; Overall Length (Inch): 1-1/2; Radius: 0.0200; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 0.1250; Shank Diame
• Abrasive Bur: Sphere
• Corner Radius End Mill: 5/16″ Dia, 1-1/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Drill Bit Set: Jobber Length Drill Bits, 13 Pc, 0.0625″ to 0.25″ Drill Bit Size, 135 °, High Speed Steel Black Oxide & Gold, Split-Point, Straight Shank
• Ball End Mill: 0.01″ Dia, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated
• Corner Radius End Mill: 5/16″ Dia, 1-1/8″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.031″ Dia, 0.093″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Square End Mill: 3/32'' Dia, 0.279'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.02″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Woodruff Keyseat Cutter: 0.093″ Cut Dia, 0.047″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Boring Bar: 0.23″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Woodruff Keyseat Cutter: 0.093″ Cut Dia, 0.031″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC, 0.0900" Radius, 7 Flute, Solid Carbide
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.0312″ Dia, 0.0265″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Uncoated, Single End
• Boring Bar: 0.23″ Min Bore, 1.15″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 0.08″ Dia, 0.12″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Boring Bar: 0.23″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 0.062″ Dia, 0.186″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Boring Bar: 0.23″ Min Bore, 1.6″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Chamfer Mill: 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Boring Bar: 0.29″ Min Bore, 1.35″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Compression Spring: 2.233″ OD, 7.5″ Free Length 0.192″ Wire Dia, 80.477 lb Max Load, 21.337 lb/in Spring Rate, Stainless Steel
• Boring Bar: 0.23″ Min Bore, 1.4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Profile Boring Bar: 4.7 mm Min Bore, 27 mm Max Depth, Right Hand Cut, Fine Grain Solid Carbide 6 mm Shank Dia, 52 mm OAL, 0.2 mm Corner Radius
• Duct Tape: 1/2″ Wide, 6.3 mil Thick, Lead Foil Rubber Adhesive, 15 lb/in Tensile Strength
• Chamfer Mill: 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 1/8″ Dia, 0.1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: 0.2435″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Spiral Point Tap: 5/16-18, UNC, 3 Flutes, Plug, 2B, HSS-E, GLT-1 Finish 3.5433″ OAL, Right Hand, H5, Series BU20C300
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: 0.2415″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.823″ OD, 3″ Free Length 0.162″ Wire Dia, 145.067 lb Max Load, 283.405 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.015″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Compression Spring: 0.999″ OD, 7.5″ Free Length 0.105″ Wire Dia, 44.57 lb Max Load, 10.715 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Compression Spring: 1.351″ OD, 3.25″ Free Length 0.148″ Wire Dia, 86.714 lb Max Load, 54.383 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.3125″ Dia, 3 Flute, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 37 ° Helix, ZrN Coated, Single End, Series 2047
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.445″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H3, Series 317Ti
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, VC-10, V Finish 0.445″ Thread Length, 3.54″ OAL, Right Hand Flute, Right Hand Thread, H4, Series 317Ti