Products

• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.596″ OD, 0.027″ Thick
• Hard Hat: Construction, Full Brim, Class E, 4-Point Suspension Black, HDPE
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.44″ OD, 0.034″ Thick
• O-Cedar MaxiPlus Professional Angle Broom with Flagged Bristles, 1 ea
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.52″ ID, 0.64″ OD, 0.054″ Thick
• Hard Hat: Construction, Full Brim, Class E, 4-Point Suspension Yellow, HDPE
• Hard Hat: Construction, Full Brim, Class E, 4-Point Suspension Blue, HDPE
• 1/4″ Screw Standard Flat Washer: Steel, Uncoated 0.266″ ID, 0.735″ OD, 0.052″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.937″ OD, 0.027″ Thick
• 220 Grit Aluminum Oxide Square Polishing Stone Very Fine Grade, 1/2″ Wide x 6″ Long x 1/2″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.502″ ID, 0.629″ OD, 0.052″ Thick
• 220 Grit Silicon Carbide Square Polishing Stone Very Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.209″ ID, 0.532″ OD, 0.057″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.526″ ID, 0.862″ OD, 0.027″ Thick
• 150 Grit Silicon Carbide Square Polishing Stone Very Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Gloves: Size L Gold, Smooth Grip
• 1/2″ Screw 2″ OAL 0.505″ ID x 1″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.458″ ID, 0.809″ OD, 0.068″ Thick
• Taper Length Drill Bit: 0.2913″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Continuous Tape Cartridges for Printers: 3/8" x 21', Polyester, White
• Gloves: Size M Gold, Smooth Grip
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.587″ ID, 0.841″ OD, 0.043″ Thick
• Ball Grip Quick-Release Pin: Ring Handle, 3/4″ Pin Dia, 1-1/2″ Usable Length 3.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.44″ ID, 1″ OD, 0.069″ Thick
• Impact Socket: 6-Point, 6-7/16″ OAL
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, Black Shore D-70
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.506″ ID, 0.812″ OD, 0.036″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.512″ ID, 3/4″ OD, 0.02″ Thick
• Float Valves; Style: Angle Pattern-Single Seat; Pipe Size: 3/8″; End Connection: MIP; Valve Body Material: Stainless Steel; PVC; GPM @ 50 Psi: 14.00; Float Arm Size: 1/4″ NPT; Style: Angle Pattern-Single Seat
• Spiral Flute Tap: 1-3/4-8, UN, 6 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish Right Hand Flute, Right Hand Thread, H6, Series CU50C310
• Taper Length Drill Bit: 0.1405″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.519″ ID, 0.749″ OD, 0.028″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.628″ OD, 0.057″ Thick
• Spiral Flute Tap: 1-3/4-8, UN, 8 Flute, 2-3 P, 2B Class of Fit, HSS-E, GLT-1 Finish Right Hand Flute, Right Hand Thread, H7
• Taper Length Drill Bit: 0.1417″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.478″ ID, 0.702″ OD, 0.054″ Thick
• Arc Flash Clothing Kit: Size 5X-Large, Cotton, Coat, Hoods & Leggings
• High Temperature Masking Tape: 60 yd Long, 6.7 mil Thick, Green Crepe Paper, Natural Synthetic Rubber Adhesive, 25 lb/in Tensile Strength
• Standard Straight Line Action Clamp: 700 lb Load Capacity, 2.5787″ Plunger Travel, Steel 0.618″ Plunger Dia, Straight Handle
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.476″ ID, 0.719″ OD, 0.038″ Thick
• Threading Insert:04 Size, GG305 Style, Carbide Grade, Solid Carbide TiCN Finish, 5 mm TPI, Series 25664
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T10; Blade Length (mm): 125.0000; Overall Length (mm): 152.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T10; Handle Type: T-Handle; Additional
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.511″ ID, 0.873″ OD, 0.056″ Thick
• Plastic Bar: Polycarbonate, 1/2″ Thick, Clear
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.452″ ID, 0.628″ OD, 0.03″ Thick
• Plastic Bar: Polycarbonate, 1/16″ Thick, Clear
• Plastic Sheet: Polystyrene, 3/32″ Thick, White, 2,500 psi Tensile Strength Rockwell R-70
• Nutdrivers; Tool Type: Precision Nut Driver; Size (Decimal Inch): 11/32; Shaft Type: Solid Shaft; Shaft Length: 6.0000; Overall Length (Decimal Inch): 10.0000
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.535″ ID, 0.997″ OD, 0.056″ Thick
• Work Shirt: General Purpose, Large, Cotton & Polyester, Black, 1 Pocket
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.23″ ID, 1/2″ OD, 0.054″ Thick
• Plastic Rod: Garolite (CE), 2' Long, 3/8″ Dia, Brown Rockwell M-100
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.534″ ID, 1″ OD, 0.036″ Thick
• Emergency Light Assemblies; Type: Flush Mount Led Warning Light; Flash Rate: 71 Quad Flash; Flash Rate (FPM): 71 Quad Flash; Mount: Flush Mount; Color: Red; Power Source: 12-24V DC; Shape: Round; Specifications: ECE, DOT REQUIREMENTS
• Emergency Light Assemblies; Type: Flush Mount Led Warning Light; Flash Rate: Variable; Mount: Flush Mount; Color: Amber; Power Source: 12-24V DC; Shape: Round; Specifications: ECE, DOT REQUIREMENTS
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.241″ ID, 0.469″ OD, 0.025″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 1/2″ OD, 0.043″ Thick
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Clear Lenses Black & Red Frame
• 1/4″ Screw Standard Flat Washer: Steel, Uncoated 0.262″ ID, 0.565″ OD, 0.027″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.52″ ID, 0.74″ OD, 0.047″ Thick
• Mechanics Drill Bit: 27/64″ Dia, 135 ™, High Speed Steel, Weldon Shank, Split Point Oxide Finish, 4-7/16″ OAL, RH Cut
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.225″ ID, 0.497″ OD, 0.013″ Thick
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Coveralls & Hoods
• Hex Head Cap Screw: 1/4-20 x 4-1/2″, Grade 8 Steel, Uncoated Partially Threaded, ASME B18.2.1
• Pneumatic & Valve Lockouts; Type: Push-Button & Rotary Switch Lockout; Maximum Valve Handle Size (Inch): 0.630; Maximum Pipe Diameter (Inch): 0.630; Overall Height: 3.2 in; Minimum Valve Handle Size (Inch): 0.630; Minimum Pipe Diameter (Inch): 0.630; Maxi
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.998″ OD, 0.033″ Thick
• Plastic Sheet: Polyvinylchloride, 1/2″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.753″ OD, 0.041″ Thick
• Pneumatic & Valve Lockouts; Type: Push-Button & Rotary Switch Lockout; Maximum Valve Handle Size (Inch): 0.630; Maximum Pipe Diameter (Inch): 0.630; Overall Height: 2 in; Minimum Valve Handle Size (Inch): 0.630; Minimum Pipe Diameter (Inch): 0.630; Maximu
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.531″ ID, 0.751″ OD, 0.033″ Thick
• Pneumatic & Valve Lockouts; Maximum Number of Padlocks: 1; Maximum Shackle Diameter: 0.320 in; Material: Polycarbonate; Maximum Shackle Diameter (Inch): 0.320 in; Material: Polycarbonate; Includes: (1) Base; (1) Cover; (1) Yellow Label;(1) Red Label;(1) A
• 5/16″ Screw Standard Flat Washer: Steel, Uncoated 0.346″ ID, 0.564″ OD, 0.011″ Thick
• Masking Tape: 24″ Wide, 60 yd Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Wedges For Indexables; Indexable Tool Type: Disc Milling Cutter; Tool Material: Steel; Hole Diameter: 6.0000; Complete Toolholder Compatibility: 335.25; Series: 335.25; Toolholder Style Compatibility: 335.25
• 1 5-Piece 1.18″ Max Valve Handle, Polycarbonate Push-Button & Rotary Switch Lockout 0.32″ Max Shackle Diam
• 1/4″ Screw Standard Flat Washer: Steel, Uncoated 0.265″ ID, 0.564″ OD, 0.036″ Thick
• Depressed Center Wheel: Type 27, 5″ Dia, 1/8″ Thick, Cubitron 36 Grit
• Pneumatic & Valve Lockouts; Type: Push-Button & Rotary Switch Lockout; Maximum Valve Handle Size (Inch): 0.630; Maximum Pipe Diameter (Inch): 0.630; Overall Height: 2 in; Minimum Valve Handle Size (Inch): 0.630; Minimum Pipe Diameter (Inch): 0.630; Maximu
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.475″ OD, 0.028″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.51″ ID, 0.692″ OD, 0.027″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.234″ ID, 0.346″ OD, 0.022″ Thick
• #9 1-1/8″ Flute Length 120° Solid Carbide Aircraft Extension Drill Bright/Uncoated, 0.196″ Diam Straight-Cylindrical Shank, Four-Facet Point, Series 4210
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.236″ ID, 0.939″ OD, 0.055″ Thick
• #8 1-1/8″ Flute Length 120° Solid Carbide Aircraft Extension Drill Bright/Uncoated, 0.199″ Diam Straight-Cylindrical Shank, Four-Facet Point, Series 4210
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.526″ ID, 0.735″ OD, 0.025″ Thick
• Metal Push-To-Connect Tube Fittings; Fitting Type: CONN; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/4″; Tube Outside Diameter: 3/8; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Length
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 1″ OD, 0.056″ Thick
• Deck Mops, Mopping Kits & Wall Washers; Type: Deck Mop; Head Material: Plastic; Head Length (Inch): 4-4/5; Head Width (Inch): 10; Color: Silver; Green; Connection Type: Quick Change; Antimicrobial: No; For Use With: Swiffer Sweeper Cloths; Ply: 2; Applica
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE UNION RDR; Connection Type: Push-to-Connect; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 3/8; Fitting Shape: Tee; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards: DOT; T
• Disposable Gloves: Size X-Large, 8 mil, Nitrile-Coated, Nitrile Blue, 9-1/2″ Length, Smooth, FDA Approved, Static Dissipative
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.501″ ID, 0.999″ OD, 0.028″ Thick
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, Square
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.217″ ID, 0.407″ OD, 0.026″ Thick
• Indexable Drill Insert: 03 BK8430, Carbide TiAIN & TiN Finish, Square
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.365″ ID, 0.631″ OD, 0.007″ Thick
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, 1/4″ Inscribed Circle, Trigon
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.229″ ID, 0.687″ OD, 0.041″ Thick
• Indexable Drill Insert: 01 BK8425, Carbide TiAlN & TiN Finish, Square
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.227″ ID, 0.563″ OD, 0.051″ Thick
• Disposable Gloves: Size Medium, 8 mil, Nitrile-Coated, Nitrile Blue, 9-1/2″ Length, Smooth, FDA Approved, Static Dissipative
• Die Drill Bit: 0.1811″ Dia, 135 °, Solid Carbide Coated, Series 200
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, Square
• 5/16″ Screw Standard Flat Washer: Steel, Uncoated 0.352″ ID, 5/8″ OD, 0.052″ Thick
• Indexable Drill Insert: 01 BK6425, Carbide TiCN, Al2O3 & TiN Finish, Square
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Square
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.44″ OD, 0.043″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.238″ ID, 0.511″ OD, 0.059″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.237″ ID, 0.372″ OD, 0.054″ Thick
• Indexable Drill Insert: 01 BK7710, Carbide TiB2 Finish, Square
• 1-8 10″ OAL Equal Double Threaded Stud Carbon Steel, 2-1/2″ Equal Thread Length
• Grooving Tool: Face Solid Carbide, 0.046″ Groove Width
• Taper Length Drill Bit: 0.0980″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.473″ ID, 0.81″ OD, 0.016″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.471″ ID, 0.719″ OD, 0.056″ Thick
• TAG N5HF IC808 Carbide Cutoff Insert TiAlN/AlTiN/TiN Finish, Neutral Lead Angle, 5mm Cutting Width, 0.5mm Corner Radius, Series Tang-Grip
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.502″ ID, 0.877″ OD, 0.054″ Thick
• 1″ Screw Standard Flat Washer: Steel, Plain Finish 1.254″ ID, 1.749″ OD, 0.012″ Thick
• Air Tool & Air Compressor Oil; Container Size (Gal.): 5.00; Container Type: Pail; Food Grade: Yes; Flash Point (Deg F): 490.00
• Heated Snow Matting Accessories
• 1″ Screw Standard Flat Washer: Steel, Plain Finish 1.004″ ID, 1.502″ OD, 0.028″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.437″ OD, 0.028″ Thick
• Corner Radius End Mill: 1" Dia, 1-1/4" LOC, 0.76 mm Radius, 8 Flute, Solid Carbide
• 1″ Screw Standard Flat Washer: Steel, Plain Finish 1.004″ ID, 1.229″ OD, 0.028″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.219″ ID, 0.474″ OD, 0.034″ Thick
• Ergonomic Multifunction Task Chair: Vinyl, 23" Seat Height, Colonial Blue
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.532″ ID, 1.749″ OD, 0.012″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.372″ OD, 0.054″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.576″ ID, 1.062″ OD, 0.025″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.986″ OD, 0.026″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.532″ ID, 1.25″ OD, 0.026″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.236″ ID, 0.874″ OD, 0.054″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.483″ ID, 1.031″ OD, 0.029″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.536″ ID, 1″ OD, 0.057″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.518″ ID, 1.25″ OD, 0.026″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.227″ ID, 0.494″ OD, 0.027″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.238″ ID, 1.123″ OD, 0.031″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.214″ ID, 0.501″ OD, 0.016″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.509″ ID, 1.122″ OD, 0.021″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 7/8″ OD, 0.055″ Thick
• 10″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.222″ ID, 0.529″ OD, 0.058″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.52″ ID, 0.936″ OD, 0.018″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.432″ OD, 0.05″ Thick
• 3/4″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.343″ ID, 0.483″ OD, 0.045″ Thick
• 2″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.092″ ID, 0.245″ OD, 0.041″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.214″ ID, 0.51″ OD, 0.029″ Thick
• Automotive Cleaning & Polishing Tools; Tool Type: Brush Set; Applications: Vehicle Cleaning; Color: Red; Black; Green; Tool Type: Brush Set
• 8″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.192″ ID, 0.374″ OD, 0.042″ Thick
• 1/4″ Screw Standard Flat Washer: Steel, Uncoated 0.312″ ID, 0.562″ OD, 0.042″ Thick
• 3/4″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.748″ ID, 0.453″ OD, 0.053″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.522″ ID, 0.618″ OD, 0.027″ Thick
• Grooving Tool: Internal Solid Carbide
• 18″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.32″ ID, 1/2″ OD, 0.055″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.441″ ID, 0.81″ OD, 0.056″ Thick
• Grooving Tool: Internal Solid Carbide
• 6″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.151″ ID, 0.308″ OD, 0.053″ Thick
• Grooving Tool: Internal Solid Carbide
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.47″ OD, 0.035″ Thick
• 1/4″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.267″ ID, 0.558″ OD, 0.053″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.468″ ID, 0.734″ OD, 0.051″ Thick
• Grooving Tool: Internal Solid Carbide
• 4″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.129″ ID, 3/8″ OD, 0.056″ Thick
• Grooving Tool: Solid Carbide
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.515″ OD, 0.035″ Thick
• 10″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.216″ ID, 0.436″ OD, 0.053″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.226″ ID, 1/2″ OD, 0.054″ Thick
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7816; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• 12″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.234″ ID, 0.562″ OD, 0.042″ Thick
• Grooving Tool: Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.564″ ID, 0.996″ OD, 0.045″ Thick
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8291; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Grooving Tool: Solid Carbide
• 1/2″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.504″ ID, 0.74″ OD, 0.008″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.474″ ID, 0.732″ OD, 0.055″ Thick
• 6″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.159″ ID, 3/8″ OD, 0.056″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.511″ ID, 0.81″ OD, 0.027″ Thick
• Grooving Tool: Solid Carbide
• 1/4″ Screw Standard Flat Washer: Grade 316 Stainless Steel, Uncoated 0.268″ ID, 0.56″ OD, 0.054″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 3/4″ OD, 0.056″ Thick
• Grooving Tool: Solid Carbide
• 5″ Screw Standard Flat Washer: Nylon, Uncoated 0.141″ ID, 0.734″ OD, 0.017″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.507″ ID, 0.747″ OD, 0.021″ Thick
• Grooving Tool: Solid Carbide
• 1/2″ Screw Standard Flat Washer: Nylon, Uncoated 0.515″ ID, 0.83″ OD, 0.021″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.506″ ID, 0.687″ OD, 0.068″ Thick
• Grooving Tool: Solid Carbide
• Cut-Resistant Gloves: Size XS, ANSI Cut A3, Nitrile, HPPE Blue & Black, Palm & Fingers Coated, HPPE Back
• 1/4″ Screw Standard Flat Washer: Nylon, Uncoated 0.312″ ID, 7/8″ OD, 0.021″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.689″ OD, 0.055″ Thick
• Grooving Tool: Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.508″ ID, 0.871″ OD, 0.021″ Thick
• Grooving Tool: Solid Carbide
• Mechanics Drill Bit: 7/16″ Dia, 135 ™, High Speed Steel, Weldon Shank, Split Point Oxide Finish, 4-1/2″ OAL, RH Cut
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.225″ ID, 0.4″ OD, 0.046″ Thick
• Grooving Tool: Solid Carbide
• Indexable Drill Insert: 01 BK6425, Carbide TiCN, Al2O3 & TiN Finish, Square
• Cut-Resistant Gloves: ANSI Cut A3, Nitrile Blue & Black, Palm & Fingers Coated, HPPE Back
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.52″ ID, 0.861″ OD, 0.031″ Thick
• Grooving Tool: Solid Carbide
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Square
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.567″ ID, 0.998″ OD, 0.036″ Thick
• Grooving Tool: Solid Carbide
• Trash Can & Recycling Container Lids; Lid Type: Flat; Lid Shape: Round; Container Shape: Round; Compatible Container Capacity: 32 Gallon; Color: Black; Material: HDPE; For Use With: Bronco 32 Gallon Trash Container
• Indexable Drill Insert: 01 BK7710, Carbide TiB2 Finish, Square
• Back Supports; Type: Belt w/ Detachable Shoulder Straps; Support Type: Belt with Detachable Shoulder Straps; Belt Closure Type: Hook & Loop; Belt Material: Polyester; Size: 2X-Large; Fits Maximum Waist Size (Inch): 59; 59 in; Fits Minimum Waist Size (Inch
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.438″ ID, 0.747″ OD, 0.012″ Thick
• Grooving Tool: Internal Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.52″ ID, 0.747″ OD, 0.055″ Thick
• Grooving Tool: Internal Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.517″ ID, 1″ OD, 0.035″ Thick
• Grooving Tool: Internal Solid Carbide
• Arc Flash Clothing Kit: Size Small, Cotton, Bib Overalls, Hoods & Jacket
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.998″ OD, 0.013″ Thick
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 1.3772 in; Inside Diameter (mm): 25 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 1.5 in; Head Diameter (Decimal I
• Part-off / Cut-off inexable insert Carbide insert, 2 cutting edges, neutral cut direction, nano-A coated
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.215″ ID, 0.313″ OD, 0.016″ Thick
• Grooving Tool: Internal Solid Carbide
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.21″ ID, 0.436″ OD, 0.053″ Thick
• Grooving Tool: Internal Solid Carbide
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.231″ ID, 0.685″ OD, 0.051″ Thick
• Grooving Tool: Internal Solid Carbide
• Standard Straight Line Action Clamp: 850 lb Load Capacity, 1.6535″ Plunger Travel, Flanged Base, Steel 4 Mounting Hole, 0.328″ Hole, 0.63″ Plunger Dia, Straight Handle
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.688″ OD, 0.037″ Thick
• Grooving Tool: Internal Solid Carbide
• CD-R Disc: Use with CD & DVD
• Grooving Tool: Internal Solid Carbide
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.528″ ID, 0.972″ OD, 0.044″ Thick
• Paint Powder Coatings
• Plastic Sheet: Acetal, 3/8″ Thick, Black Rockwell M-90
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.247″ ID, 0.561″ OD, 0.007″ Thick
• Grooving Tool: Internal Solid Carbide
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, Trigon
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.477″ ID, 0.812″ OD, 0.054″ Thick
• Grooving Tool: Internal Solid Carbide
• Indexable Drill Insert: 03 BK8430, Carbide TiAIN & TiN Finish, Square
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.233″ ID, 0.642″ OD, 0.057″ Thick
• Grooving Tool: Internal Solid Carbide
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, Square
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.21″ ID, 0.591″ OD, 0.055″ Thick
• Grooving Tool: Internal Solid Carbide
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, Square
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.509″ ID, 0.751″ OD, 0.054″ Thick
• Indexable Drill Insert: 01 BK8425, Carbide TiAlN & TiN Finish, Square
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.44″ ID, 0.542″ OD, 0.028″ Thick
• Strip: Buna-N Rubber, 2″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.512″ ID, 0.959″ OD, 0.007″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.734″ OD, 0.057″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.235″ ID, 0.438″ OD, 0.035″ Thick
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Square