Products

• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 3/8″ OD, 0.027″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.603″ ID, 0.805″ OD, 0.052″ Thick
• Finger Cots; Type: Cot; Application: EDS-Sensitive Area; Avionic; Material: Latex; Powdered: No; Powder Style: No; Powder Free; Size: Small; Surface Finish: Textured; Latex Free: No; Standards: ANSI/ESD S20.20-2014; IEST-RP-CC 005.3; Thickness (mil): 3.50
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.241″ ID, 0.63″ OD, 0.054″ Thick
• Indexable Drill Insert: 01 BK7710, Carbide TiB2 Finish, Square
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.523″ ID, 1.002″ OD, 0.029″ Thick
• Power Nut Splitters; Nut Maximum Width Across Flats: 2.75; Maximum Tons: 55; Power Source: 110/220V, 115 VAC
• Indexable Drill Insert: 01 BK6425, Carbide TiCN, Al2O3 & TiN Finish, Square
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.469″ ID, 0.804″ OD, 0.03″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.453″ ID, 3/4″ OD, 0.057″ Thick
• Hand Cleaner: 1,250 mL Dispenser Refill Foam, Amber, Fruit Scent
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.445″ ID, 0.741″ OD, 0.067″ Thick
• 3/16″ Diam 1-1/8″ Flute Length 120° Solid Carbide Aircraft Extension Drill Bright/Uncoated, Straight-Cylindrical Shank, Four-Facet Point, Series 4210
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, Square
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.515″ ID, 0.687″ OD, 0.025″ Thick
• Indexable Drill Insert: 03 BK8430, Carbide TiAIN & TiN Finish, Square
• #11 1-1/8″ Flute Length 120° Solid Carbide Aircraft Extension Drill Bright/Uncoated, 0.191″ Diam Straight-Cylindrical Shank, Four-Facet Point, Series 4210
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.452″ ID, 0.876″ OD, 0.07″ Thick
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1610; Drill Bit Size (Wire): #20; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decimal
• Indexable Drill Insert: 01 BK8425, Carbide TiAlN & TiN Finish, Square
• #10 1-1/8″ Flute Length 120° Solid Carbide Aircraft Extension Drill Bright/Uncoated, 0.1935″ Diam Straight-Cylindrical Shank, Four-Facet Point, Series 4210
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.24″ ID, 0.503″ OD, 0.056″ Thick
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1590; Drill Bit Size (Wire): #21; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decimal
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, Square
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.51″ ID, 0.658″ OD, 0.026″ Thick
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.1562; Drill Bit Size (Inch): 0.1562; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decim
• Indexable Drill Insert: P28428E67 WSP45S, Carbide Coated, 96 ° Square
• Welding Gloves: Size 3X-Large, Uncoated, Goatskin Leather, Carpentry, Landscaping Application Black & Natural, Uncoated Coverage, Suede Grip
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.507″ ID, 0.664″ OD, 0.028″ Thick
• Taper Shank Drill Bit: 0.5625″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 8.75″ OAL, Standard Point, Spiral Flute
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.511″ ID, 0.997″ OD, 0.056″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.439″ OD, 0.027″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.486″ ID, 0.743″ OD, 0.026″ Thick
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/2″; Tube Outside Diameter: 1/2; Fitting Shape: Tee; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards: DOT;
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.59″ OD, 0.03″ Thick
• Metal Push-To-Connect Tube Fittings; Fitting Type: ELBOW; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 5/8; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.437″ OD, 0.035″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.239″ ID, 0.376″ OD, 0.055″ Thick
• Single Angle Collet: TG/PG 100 2.001″ Body Dia, 3″ OAL, 0.0004″ TIR
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.532″ ID, 0.908″ OD, 0.016″ Thick
• Die Drill Bit: 0.1960″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2″ OAL, Series 200
• Plastic Rod: PET-P, 5' Long, 4" Dia, White
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.226″ ID, 0.579″ OD, 0.05″ Thick
• ER: ER8 1″ OAL, ″ Overall Diam
• Fixture Mounting Accessories; Accessory Type: Direct Ceiling Mount; For Use With: CPANL Fixture; Color: Grey; Lamp Type: LED
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.462″ ID, 3/4″ OD, 0.054″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.239″ ID, 0.65″ OD, 0.016″ Thick
• 5.5 to 6mm ER16 Collet Coolant Seal 2,100 Max psi
• Extra Length Drill Bit: 0.2874", 140 &deg, Carbide
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.456″ ID, 0.754″ OD, 0.054″ Thick
• Single Angle Collet: TG/PG 100 2.001″ Body Dia, 3″ OAL, 0.0004″ TIR
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.372″ OD, 0.027″ Thick
• Safety Goggles: Chemical Splash Dust & Particulates, Anti-Fog, Gray Polycarbonate Lenses Indirect Vent, Gray Frame, Size Universal
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.503″ ID, 7/8″ OD, 0.027″ Thick
• Flap Disc: 5/8-11 Hole, 60 Grit, Zirconia Alumina, Type 27 Coated, Fiber-Backed, 12,200 RPM
• ER: ER8 1″ OAL, ″ Overall Diam
• Hand Cleaner: 2 L Bag Liquid, White, Orange Scent
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.562″ ID, 1.001″ OD, 0.072″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.238″ ID, 5/8″ OD, 0.054″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.48″ ID, 0.921″ OD, 0.055″ Thick
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 24; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 2.40; Insert Holding Method: Self Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 8; Relief
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.249″ ID, 0.406″ OD, 0.035″ Thick
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK240-SET; Series: PK240
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 2.20; Insert Holding Method: Self Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 8; Relief A
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.519″ ID, 0.748″ OD, 0.056″ Thick
• Collet Screws, Nuts & Springs; Accessory Type: Tool Stop Screw; Compatible Collet Series: PMC32; Length (Decimal Inch): 1.4760 in; For Use With: HSKA100 PMC 32; HSKA125 PMC32; HSKA63 PMC32; C8 PMC32; C6 PMC32
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 1.60; Insert Holding Method: Self Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 8; Relief
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.527″ ID, 0.931″ OD, 0.022″ Thick
• Collet Screws, Nuts & Springs; Accessory Type: Tool Stop Screw; Compatible Collet Series: PMC32; Length (Decimal Inch): 1.2200 in; For Use With: HSKA100 PMC 32; HSKA125 PMC32; HSKA63 PMC32; C8 PMC32; C6 PMC32
• Micro Drill Bit: 1.10 mm Dia, (0.0433"), 180 deg, Solid Carbide
• Cut-Off Inserts; Insert Style: TKN; Insert Size Code: 16; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 1.60; Insert Holding Method: Self Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Ang
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.533″ ID, 0.749″ OD, 0.026″ Thick
• Drum & Tank Handling Equipment; Load Capacity (Lb.
• Cut-Off Inserts; Insert Style: TKN; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 2.20; Insert Holding Method: Self Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angl
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.513″ ID, 0.874″ OD, 0.031″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 6.20; Groove Width (mm): 1.98; Shank Diameter (mm): 6.0000; Overall Length (mm): 52.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 2.960; Ma
• Cut-Off Inserts; Insert Style: TK; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: KW10; Cutting Width (mm): 2.20; Insert Holding Method: Self Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 8; Relief
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.542″ ID, 1″ OD, 0.055″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 6.20; Groove Width (mm): 0.79; Shank Diameter (mm): 6.0000; Overall Length (mm): 52.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 2.960; Ma
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Square
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.476″ ID, 3/4″ OD, 0.054″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 6.20; Groove Width (mm): 1.17; Shank Diameter (mm): 6.0000; Overall Length (mm): 52.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 2.960; Ma
• Indexable Drill Insert: 01 BK6425, Carbide TiCN, Al2O3 & TiN Finish, Square
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 0.937″ OD, 0.056″ Thick
• Indexable Drill Insert: 01 BK7710, Carbide TiB2 Finish, Square
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 1.7523 in; Inside Diameter (mm): 30 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 6.20; Groove Width (mm): 1.57; Shank Diameter (mm): 6.0000; Overall Length (mm): 61.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 35.00; Projection (mm): 2.960; Ma
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.441″ ID, 0.621″ OD, 0.024″ Thick
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 1.7523 in; Inside Diameter (mm): 30 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.242″ ID, 0.47″ OD, 0.026″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.535″ ID, 0.93″ OD, 0.02″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC1.250; Compatible Hole Diameter: 1.2500 in; Material: Steel; Overall Length: 1.26; Accessory Type: Screw
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC32; Compatible Hole Diameter: 32.00 mm; Material: Steel; Overall Length: 1.12; Accessory Type: Screw
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.509″ ID, 0.959″ OD, 0.019″ Thick
• Vibration-Control Clamp
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.44″ ID, 0.788″ OD, 0.056″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC1.250; Compatible Hole Diameter: 1.2500 in; Material: Steel; Overall Length: 1.12; Accessory Type: Screw
• Hex Head Cap Screw: 3/8-16 x 1″, Grade A-286 Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.519″ ID, 0.936″ OD, 0.015″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC1.250; Compatible Hole Diameter: 1.2500 in; Material: Steel; Overall Length: 1.22; Accessory Type: Screw
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Coat, Hoods & Leggings
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1/8″ Thick, Beige Rockwell R-105
• Tank Flanges; Overall Height (Inch): 25/32
• Plastic Sheet: Garolite, 1/4″ Thick, 6″ Long, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.531″ ID, 0.808″ OD, 0.037″ Thick
• Micro Drill Bit: 1.60 mm Dia, (0.0630"), 135 deg, Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.515″ ID, 7/8″ OD, 0.013″ Thick
• Traffic Cone & Barricade Accessories; Type: Weight; Width (Decimal Inch): 15.5000; Material: Recycled Rubber; Color: Black; Weight (Lb.): 7.0000; For Use With: 28 in & 36 in Traffic Cones; Additional Information: Hole Diameter: 10.75 in; Shape: Octagon
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.518″ ID, 0.874″ OD, 0.03″ Thick
• Masking Tape: 2″ Wide, 60 yd Long, 5.5 mil Thick, Tan Crepe Paper, Rubber Adhesive, 22 lb/in Tensile Strength
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.61″ OD, 0.053″ Thick
• 7/64″ Diam 1-1/2″ Flute Length 135° High Performance Cobalt Aircraft Extension Drill Bright/Uncoated, Straight-Cylindrical Shank, Split Point
• Hand Cleaning Wipes: Canister, 6 x 5″ Sheet, White
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.48″ ID, 5/8″ OD, 0.026″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.472″ ID, 0.749″ OD, 0.026″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.433″ ID, 1″ OD, 0.011″ Thick
• #4-40, 1.437″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/4″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 303, Uncoated
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.225″ ID, 0.534″ OD, 0.052″ Thick
• Office Cubicle Partitions; Office Cubicle Partition Type: Modular Wall Room Divider; Color: Gray, Frosted; Material: Aluminum; Mount Type: Freestanding; Height (Inch): 48; Width (Inch): 53; Thickness (Inch): 1-3/4
• #10-32, 4-3/8″ OAL, 3/8″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 4″ Body Length, 3/8″ Thread Length, 1/2″ Thread Depth, Grade T-3, Uncoated
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.627″ ID, 1.003″ OD, 0.068″ Thick
• Square End Mill: 3 Flute, Solid Carbide
• #10 Screw 1″ OAL 0.192″ ID x 5/8″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.249″ ID, 0.481″ OD, 0.022″ Thick
• Line Fishing System Kits & Components; Component Type: Replacement Kit; Includes: C Hook
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.532″ ID, 0.715″ OD, 0.026″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.505″ ID, 1″ OD, 0.007″ Thick
• Soap Scum Remover & Disinfectant Trigger Spray
• Ball Grip Quick-Release Pin: T-Handle, 10 mm Pin Dia, 20 mm Usable Length 56.8 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• 1 x 6″ 6063 Aluminum Pipe Nipple Threaded with Thread Sealant, Schedule 40
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.513″ ID, 0.877″ OD, 0.055″ Thick
• C-Clamp: 4″ Max Opening, 3-1/4″ Throat Depth, Forged Steel 6,200 lb Load Capacity, Deep Throat
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.312″ OD, 0.027″ Thick
• 1-1/2 x 4″ 6063 Aluminum Pipe Nipple Threaded, Schedule 40
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.218″ ID, 0.472″ OD, 0.03″ Thick
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.336″ OD, 0.046″ Thick
• Duster: Use with Office Equipment
• 1/4″ Screw Standard Flat Washer: Steel, Uncoated 0.267″ ID, 0.624″ OD, 0.033″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.53″ ID, 0.876″ OD, 0.007″ Thick
• Replacement Suspensions; Hard Hat Compatibility: MSA; Material: Nylon; Adjustment: Pin Lock; Color: Gray; Suspension: 4-Point; Suspension: 4-Point
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.44″ ID, 0.751″ OD, 0.056″ Thick
• Portable Hydraulic Cylinders; Actuation: Single Acting; Load Capacity: 55; Stroke Length: 5.91; Oil Capacity: 64.88; Cylinder Bore Diameter (Decimal Inch): 3.74; Cylinder Effective Area: 1; Lowered Height: 12.05
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 5/8″ OD, 0.037″ Thick
• Pipe Fitting: 1-1/2 x 1-1/2″ Fitting, 304 Stainless Steel 150 psi
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.472″ ID, 0.942″ OD, 0.055″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.326″ OD, 0.026″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 2.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 3.400; Ma
• Pipe Hex Plug: 1″ Fitting, 304 Stainless Steel MNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.459″ ID, 0.749″ OD, 0.051″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 2.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 3.400; Ma
• Arc Flash Clothing Kit: Size 3X-Large, Cotton, Jacket, Pants & Hoods
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.224″ ID, 0.449″ OD, 0.027″ Thick
• Black Hex Bushing: 1-1/4 x 3/8″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 1.50; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 3.400; Ma
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.514″ ID, 0.68″ OD, 0.021″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 1.50; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 3.400; Ma
• Arc Flash Clothing Kit: Size Medium, Cotton, Jacket, Pants & Hoods
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.509″ ID, 0.749″ OD, 0.072″ Thick
• Sign: Rectangle & Square, ″Notice Cover Your Cough. Aviso Cubrete Al Toser″ Aluminum, 14″ High
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 1.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 25.00; Projection (mm): 3.400; Ma
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.535″ ID, 3/4″ OD, 0.057″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 1.98; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 3.460; Ma
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.503″ ID, 0.937″ OD, 0.055″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 0.79; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 3.460; Ma
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.249″ ID, 0.468″ OD, 0.016″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.44″ ID, 0.921″ OD, 0.061″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 1.17; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 3.460; Ma
• Wet & Dry Cut Saw Blade: 7″ Dia, 7/8 & 5/8″ Arbor Hole, 0.09″ Kerf Width, 14 Teeth High Speed Steel Teeth, Use on Masonry, Standard Arbor
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.21″ ID, 0.447″ OD, 0.056″ Thick
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 1.57; Shank Diameter (mm): 7.0000; Overall Length (mm): 51.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 20.00; Projection (mm): 3.460; Ma
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 0.378″ OD, 0.027″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.212″ ID, 0.392″ OD, 0.038″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.212″ ID, 3/4″ OD, 0.035″ Thick
• Free-Running Insert: M14x1.25, 7.00 mm OAL
• Standard Manual Ball Valve: 3/4″ Pipe, Full Port Soldered x Soldered
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.447″ ID, 0.783″ OD, 0.056″ Thick
• Ball End Mill: 3/32" Dia, 3/16" LOC, 2 Flute, High Speed Steel
• Arc Flash Clothing Kit: Size X-Large, Cotton, Bib Overalls, Hoods & Jacket
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.226″ ID, 0.464″ OD, 0.068″ Thick
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Coat, Hoods & Leggings
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.504″ ID, 7/8″ OD, 0.043″ Thick
• Hex Key: 6 mm Hex, T-Handle Arm 185 mm OAL, 61CrSiV5 Vanadium Steel
• Taper Length Drill Bit: 0.2460″ Dia, 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.563″ ID, 1.002″ OD, 0.026″ Thick
• Taper Length Drill Bit: 0.2610″ Dia, 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• Sign: Rectangle & Square, ″Notice Wash Hands Before Returning To Work. Aviso Lavarse Las Manos Antes De Regresar Al Trabajo″ Aluminum, 14″ High
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.469″ OD, 0.045″ Thick
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Coat, Hoods & Leggings
• Taper Length Drill Bit: 0.2720″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.453″ ID, 1″ OD, 0.028″ Thick
• Sign: Rectangle & Square, ″Notice Cover Your Cough″ Aluminum, 10″ High
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.454″ ID, 0.739″ OD, 0.072″ Thick
• Arc Flash Clothing Kit: Size 2X-Large, Cotton, Coat, Hoods & Leggings
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.249″ ID, 0.474″ OD, 0.046″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.241″ ID, 0.623″ OD, 0.051″ Thick
• Arc Flash Clothing Kit: Size Small, Cotton, Coat, Hoods & Leggings
• Corner Chamfer End Mill: 19.50 mm Dia, 38.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.538″ ID, 0.874″ OD, 0.07″ Thick
• Sign: Rectangle & Square, ″How To Wear A Mask Properly 1 Wash Your Hands Or Clean Them With Sanitizer 2 Prepare Your Mask 3 Hold Mask By The Ear Loops And Place A Loop Around Each Ear 4 Pull The Bottom Of The Mask Over Your Mouth And Chin 5 Mold Or Pinch
• Care Instructions Label: ″Fragile, Please Handle With Care, Thank You″, Rectangle, 3″ Wide, 2″ High Paper
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.505″ ID, 0.811″ OD, 0.028″ Thick
• Strip: Buna-N Rubber, 1/2″ Wide, 120″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Care Instructions Label: ″Glass, Please Handle With Care, Thank You″, Rectangle, 3″ Wide, 2″ High Paper
• Corner Chamfer End Mill: 20.00 mm Dia, 38.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.554″ ID, 7/8″ OD, 0.07″ Thick
• Care Instructions Label: ″Fragile, Liquid, Handle With Care″, Rectangle, 3″ Wide, 2″ High Paper
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.507″ ID, 0.976″ OD, 0.026″ Thick
• Chamfer Mill: 3/8" Dia, 3/8" Shank Dia, 60.00 deg, 4 Flute, Solid Carbide, Double End
• Care Instructions Label: ″Fragile, This Side Up, Handle With Care″, Rectangle, 3″ Wide, 2″ High Paper
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 5/8″ ID, 0.937″ OD, 0.057″ Thick
• Care Instructions Label: ″Delicate Instruments, Handle With Care, Fragile″, Rectangle, 3″ Wide, 2″ High Paper
• Shelf Utility Cart: 53" Long, 30" Wide, Steel, 2000 lb Capacity, Blue
• Corner Chamfer End Mill: 20.00 mm Dia, 38.00 mm LOC, 5 Flute, 0.30 mm Chamfer Width, Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.519″ ID, 0.939″ OD, 0.016″ Thick
• Care Instructions Label: ″Delicate Instruments, Handle With Great Care″, Rectangle, 3″ Wide, 2″ High Paper
• Shelf Utility Cart: 41" Long, 24" Wide, Steel, 2000 lb Capacity, Gray
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.341″ OD, 0.035″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 5/8″ OD, 0.028″ Thick
• Arc Flash Clothing Kit: Size X-Large, Cotton, Coat, Hoods & Leggings
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.247″ ID, 0.433″ OD, 0.015″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.434″ ID, 0.747″ OD, 0.007″ Thick
• Taper Length Drill Bit: 0.1634″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Cylindrical Shank, Series 219
• Taper Length Drill Bit: 0.1065″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.499″ OD, 0.035″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.484″ ID, 0.868″ OD, 0.01″ Thick
• Turning Insert: TNMG160408IPE+ ACS15M, Carbide
• MIG Welding Wire: 0.03″ Dia 1 lb
• Taper Length Drill Bit: 0.1470″ Dia, 130 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 668
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.514″ ID, 3/4″ OD, 0.059″ Thick
• Extra Length Drill Bit: 0.5984", 140 &deg, Carbide
• Taper Length Drill Bit: 0.1457″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.455″ ID, 0.661″ OD, 0.057″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.53″ OD, 0.045″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.212″ ID, 0.343″ OD, 0.036″ Thick
• Taper Length Drill Bit: 0.1524″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 70, Plain Backing
• Taper Length Drill Bit: 0.1535″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.439″ ID, 7/8″ OD, 0.057″ Thick
• Angled Brooms; Handle Connection Type: Threaded; Brush Width (Decimal Inch): 9.8000; Bristle Material: Polypropylene; Bristle Color: Black; Flagged: No; FSIS Approved: No; Water Resistant: Yes; Locking Handle: No; Recommended Handle: 294019; Thickness (In
• 5" Diam x 1" Wide x 5-11/16" OAH Stem Mount Swivel Caster
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.205″ ID, 0.44″ OD, 0.02″ Thick
• Arc Flash Clothing Kit: Size 3X-Large, Cotton, Coveralls & Hoods
• Angled Brooms; Handle Connection Type: Threaded; Brush Width (Decimal Inch): 9.8000; Bristle Material: Polypropylene; Bristle Color: Blue; Flagged: No; FSIS Approved: No; Water Resistant: Yes; Locking Handle: No; Recommended Handle: 294013; Thickness (Inc
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.628″ ID, 0.874″ OD, 0.043″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.21″ ID, 0.315″ OD, 0.044″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.462″ ID, 0.584″ OD, 0.037″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.512″ ID, 5/8″ OD, 0.048″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.249″ ID, 3/4″ OD, 0.043″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.227″ ID, 1/2″ OD, 0.032″ Thick