Products

• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.161″ ID, 0.312″ OD, 0.028″ Thick
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.161″ ID, 0.628″ OD, 0.029″ Thick
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.128″ ID, 0.365″ OD, 0.026″ Thick
• 10″ Screw Standard Flat Washer: Steel, Plain Finish 0.203″ ID, 0.362″ OD, 0.038″ Thick
• 5″ Screw Standard Flat Washer: Steel, Plain Finish 0.141″ ID, 0.437″ OD, 0.027″ Thick
• Spade Drill Insert: 0.7540" Dia, Seat Size 1, Cobalt, 132 deg Point
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.167″ ID, 0.269″ OD, 0.023″ Thick
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 20.0000; Diameter (Decimal Inch): 0.7813; Diameter (Inch, Fraction): 25/32; Shaft Diameter: 20.000; Material: Steel; Minimum Diameter Tolerance: 19.987 mm
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.166″ ID, 0.313″ OD, 0.026″ Thick
• #6-32, 2″ OAL, 1/4″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-3/4″ Body Length, 1/4″ Thread Length, 3/8″ Thread Depth, Grade 303, Uncoated
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 31.7500; Diameter (Decimal Inch): 1.2500; Diameter (Inch, Fraction): 1-1/4; Shaft Diameter: 31.750; Shaft Diameter: 1.2500; Material: Steel; Length (Inch): 3; Minimum Diameter Tolerance: 31.7246
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.158″ ID, 0.436″ OD, 0.027″ Thick
• Plasma Cutter Cutting Tips, Electrodes, Shield Cups, Nozzles & Accessories; Accessory Type: Shield Cap; Type: Shield Cap; Amperage: 100; 40; For Use With: SL100 Torch; TD SL60
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 31.7500; Diameter (Decimal Inch): 1.2500; Diameter (Inch, Fraction): 1-1/4; Shaft Diameter: 31.750; Shaft Diameter: 1.2500; Material: Steel; Length (Inch): 4; Minimum Diameter Tolerance: 31.7246
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.172″ ID, 0.357″ OD, 0.026″ Thick
• Welding Gloves: Size X-Large, Uncoated, Impact Application Green, Uncoated Coverage, Smooth Grip
• 5/8″ Screw Standard Flat Washer: Steel, Plain Finish 0.675″ ID, 7/8″ OD, 0.055″ Thick
• Stationary Work Bench: 30″ Wide, 60″ Deep, 30″ High
• Arc Flash Clothing Kit: Size 5X-Large, Cotton, Coat, Hoods & Leggings
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2344; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.128″ ID, 1/2″ OD, 0.054″ Thick
• Stationary Work Bench: 30″ Wide, 60″ Deep, 37″ High
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.128″ ID, 0.532″ OD, 0.056″ Thick
• Round Linear Shafting; Shaft Type: Standard; Diameter (mm): 16.0000; Diameter (Decimal Inch): 0.6250; Diameter (Inch, Fraction): 5/8; Shaft Diameter: 16.000; Material: Steel; Minimum Diameter Tolerance: 15.989 mm
• CNC Storage Accessories; For Use With: Tool Clamp; Description: 1 pce. bench vise colour: black
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.162″ ID, 0.344″ OD, 0.032″ Thick
• Lathe Tool Holder Bushings; Bushing Type: Tool Holder Bushing (Lathe); Outside Diameter (Decimal Inch
• Nylon Tube: 1/4″ ID, 3/8″ OD, 10' Long 500 Max psi, Black
• 3″ Screw Standard Flat Washer: Steel, Plain Finish 0.102″ ID, 0.626″ OD, 0.056″ Thick
• Fiber Disc: 5" Disc Dia, Arbor Hole, 60 Grit, Zirconia Alumina
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.174″ ID, 0.312″ OD, 0.026″ Thick
• Flatbars; Hand: Non-Handed; Rating: Non Rated; Overall Length (Decimal Inch): 48.00; Type: V40; Finish/Coating: Aluminum; Minimum Door Width: 44-7/8; Maximum Door Width: 48.000; Grade: 1; Length (Feet): 4; Overall Length: 48.00
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.174″ ID, 0.395″ OD, 0.023″ Thick
• Fiber Disc: 5" Disc Dia, Arbor Hole, 50 Grit, Zirconia Alumina
• Torx Screwdriver Bits; Type: Torque Spanner & Spare Blade; Torx Size: T6
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.157″ ID, 0.376″ OD, 0.035″ Thick
• Fiber Disc: 5" Disc Dia, Arbor Hole, 50 Grit, Zirconia Alumina
• Plastic Bar: Acetal, 1/4″ Thick, White
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.174″ ID, 0.878″ OD, 0.028″ Thick
• Plastic Bar: Acetal, 1/8″ Thick, White
• Hex Rethreading Die: Right Hand, No Carbon Steel
• 10″ Screw Standard Flat Washer: Steel, Plain Finish 0.199″ ID, 0.627″ OD, 0.013″ Thick
• 3″ Screw Standard Flat Washer: Steel, Plain Finish 0.105″ ID, 0.248″ OD, 0.021″ Thick
• Electric Strikes; Length (Inch): 9 in; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Overall Length: 9 in; Finish: Stainless Steel
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.161″ ID, 0.307″ OD, 0.033″ Thick
• Arc Flash Clothing Kit: Size Large, Cotton, Jacket, Pants & Hoods
• Electric Strikes; Length (Inch): 9 in; Power Type: Electric; Strike Material: Stainless Steel; Finish/Coating: Stainless Steel; Voltage: 12; Material: Stainless Steel; Type of Power: Electric; Overall Length: 9 in; Finish: Stainless Steel
• 2″ Screw Standard Flat Washer: Steel, Plain Finish 0.091″ ID, 0.267″ OD, 0.012″ Thick
• 10″ Screw Standard Flat Washer: Steel, Plain Finish 0.203″ ID, 0.312″ OD, 0.026″ Thick
• 2″ Screw Standard Flat Washer: Steel, Plain Finish 0.099″ ID, 3/8″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.158″ ID, 0.874″ OD, 0.054″ Thick
• 1″ Screw Standard Flat Washer: Steel, Plain Finish 0.086″ ID, 1/4″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.193″ ID, 0.624″ OD, 0.013″ Thick
• Jobber Drill: #17, 118 deg Point, Cobalt
• 3″ Screw Standard Flat Washer: Steel, Plain Finish 0.102″ ID, 3/8″ OD, 0.026″ Thick
• Drum & Tank Handling Equipment; Load Capacity (Lb.
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.176″ ID, 0.763″ OD, 0.026″ Thick
• Drum & Tank Handling Equipment; Load Capacity (Lb.
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.172″ ID, 0.309″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.16″ ID, 1/4″ OD, 0.007″ Thick
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.158″ ID, 0.438″ OD, 0.067″ Thick
• 2″ Screw Standard Flat Washer: Steel, Plain Finish 0.098″ ID, 0.31″ OD, 0.026″ Thick
• Tank Flanges; Overall Height (Inch): 7/8
• 5″ Screw Standard Flat Washer: Steel, Plain Finish 0.142″ ID, 0.389″ OD, 0.028″ Thick
• 8″ Screw Standard Flat Washer: Steel, Plain Finish 0.166″ ID, 0.343″ OD, 0.031″ Thick
• Ball Grip Quick-Release Pin: L-Handle, 12 mm Pin Dia, 20 mm Usable Length 56.8 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.153″ ID, 0.38″ OD, 0.007″ Thick
• #8 Screw 1-3/8″ OAL 0.166″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Medical Testing & Analysis; RAPID TEST 90/PK ANTIGEN COVID-19
• 4″ Screw Standard Flat Washer: Steel, Plain Finish 0.128″ ID, 0.282″ OD, 0.068″ Thick
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.162″ ID, 0.811″ OD, 0.029″ Thick
• Polytetrafluroethylene Film Tape: 3″ Wide, 36 yd Long, 3.7 mil Thick 27 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• 6″ Screw Standard Flat Washer: Steel, Plain Finish 0.161″ ID, 0.374″ OD, 0.012″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.535″ ID, 0.912″ OD, 0.052″ Thick
• Door Damper: 12.3″ Closer Body Length Aluminum Finish, Non-Handed
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.566″ ID, 1.001″ OD, 0.013″ Thick
• Corner Chamfer End Mill: 18.00 mm Dia, 32.00 mm LOC, 5 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Abrasive Belt: 1/2" Wide, 48" OAL, Ceramic Alumina
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.501″ ID, 0.744″ OD, 0.007″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.53″ ID, 0.874″ OD, 0.027″ Thick
• Corner Chamfer End Mill: 19.00 mm Dia, 38.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• Impact Socket: 6-Point
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 1″ OD, 0.025″ Thick
• Steel Bin Cabinet: 60" Wide, 78" High
• Grooving Tool: Internal Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.505″ ID, 0.823″ OD, 0.057″ Thick
• Air Tool & Air Compressor Oil; Container Size (Gal.): 5.00; Container Type: Pail; Food Grade: Yes; Flash Point (Deg F): 490.00
• Grooving Tool: Internal Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.508″ ID, 0.624″ OD, 0.007″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.226″ ID, 0.444″ OD, 0.026″ Thick
• Combination Hand Tool Set: 152 Pc, Industrial Maintenance Tool Set
• Grooving Tool: Internal Solid Carbide
• Plastic Sheet: Acetal, 1/32″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.563″ ID, 0.938″ OD, 0.048″ Thick
• Grooving Tool: Internal Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.521″ ID, 0.736″ OD, 0.054″ Thick
• Sheet: Polyurethane Rubber, 6″ Wide, 6″ Long, Amber Durometer 60, Acrylic Adhesive Backing
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.514″ ID, 0.998″ OD, 0.007″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.439″ ID, 0.532″ OD, 0.028″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.237″ ID, 0.534″ OD, 0.042″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2123; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.241″ ID, 0.549″ OD, 0.056″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.43″ ID, 0.616″ OD, 0.028″ Thick
• Micro Drill Bit: 2.18 mm Dia, (0.0860"), 140 deg, Solid Carbide
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.441″ ID, 0.744″ OD, 0.052″ Thick
• 2-11/16 Inch Long, Hook
• 1/4″ Screw Standard Flat Washer: Steel, Uncoated 0.263″ ID, 0.624″ OD, 0.045″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.477″ ID, 0.681″ OD, 0.011″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.472″ ID, 0.709″ OD, 0.016″ Thick
• Corner Radius End Mill: 1/4" Dia, 1-1/2" LOC, 0.0050" Radius, 3 Flute, Solid Carbide
• Corner Radius End Mill: 1-1/4" Dia, 3-1/2" LOC, 0.1200" Radius, 6 Flute, Solid Carbide
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.509″ ID, 1″ OD, 0.025″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.535″ ID, 0.908″ OD, 0.053″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.457″ ID, 0.938″ OD, 0.052″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.432″ OD, 0.016″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 1/4″ ID, 1/2″ OD, 0.056″ Thick
• Drum & Tank Handling Equipment; Load Capacity (Lb.
• Extra Length Drill Bit: 0.128″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 0.503″ OD, 0.035″ Thick
• Taper Length Drill Bit: 0.2008″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.512″ ID, 0.942″ OD, 0.056″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.224″ ID, 0.499″ OD, 0.063″ Thick
• 20 x 50 6FL A BRAND AE-MS-H Multi-flute square type and radius type carbide end mills designed for stable and high-efficiency milling of high-hardness steels.
• Plastic Bar: Nylon 6/6, 1/2″ Thick, Off-White
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 1/2″ ID, 0.873″ OD, 0.056″ Thick
• Plastic Bar: Nylon 6/6, 1/2″ Thick, Off-White
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.589″ ID, 0.715″ OD, 0.03″ Thick
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, White Durometer 50, Plain Backing
• Plastic Bar: Acrylonitrile Butadiene Styrene, 3/8″ Thick, Beige Rockwell R-105
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 1/2″ OD, 0.052″ Thick
• Plastic Bar: Acetal, 1/16″ Thick, White
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.224″ ID, 0.481″ OD, 0.027″ Thick
• Plastic Sheet: Garolite, 5/8″ Thick, 6″ Long, Brown, 16,000 psi Tensile Strength Rockwell M-100
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.439″ ID, 0.62″ OD, 0.028″ Thick
• Arc Flash Clothing Kit: Size Medium, Cotton, Coveralls & Hoods
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.454″ ID, 0.733″ OD, 0.021″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.221″ ID, 0.386″ OD, 0.035″ Thick
• Welding Gloves: Size 2X-Large, Uncoated, MIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.574″ ID, 0.782″ OD, 0.055″ Thick
• Grooving Tool: Internal Solid Carbide
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.236″ ID, 0.473″ OD, 0.007″ Thick
• Combination Wrench: 7/8" Head Size, 15 deg Offset
• Hex Head Cap Screw: 7/16-20 x 1-1/4″, Grade 5 Steel, Zinc-Plated Fully Threaded, ASME B18.2.1
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.457″ ID, 0.876″ OD, 0.035″ Thick
• Ball Grip Quick-Release Pin: T-Handle, 10 mm Pin Dia, 25 mm Usable Length 61.8 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 0.383″ OD, 0.042″ Thick
• Ball Grip Quick-Release Pin: T-Handle, 8 mm Pin Dia, 30 mm Usable Length 62.3 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Spot Welder Tips; Tip Type: Bent Shank for 5RW Female Cap; Material: RWMA Class 2 - C18200; Type: Bent Shank for 5RW Female Cap
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.571″ ID, 3/4″ OD, 0.025″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.567″ ID, 0.749″ OD, 0.058″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.506″ ID, 0.746″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.377″ OD, 0.031″ Thick
• Tool & Cutter Grinding Wheels; Wheel Type: Cup Wheel; Wheel Diameter (Inch): 4 in; Abrasive Material: Diamond; Grade: Super Fine; Grit: 0; Maximum Rpm: 15000.000; Face Width (Inch): 0.75 in; Hole Thread Size: 5/8-11
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.519″ ID, 7/8″ OD, 0.073″ Thick
• Latex Tube: 1/8″ ID, 1/4″ OD, 5' Long 40 Max psi, Yellow
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.226″ ID, 0.655″ OD, 0.027″ Thick
• Hard Hat: Construction, High Visibility & Impact Resistant, Full Brim, Type 1, Class C, 4-Point Suspension White, HDPE, Vented
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.505″ ID, 0.756″ OD, 0.026″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.538″ ID, 0.998″ OD, 0.013″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.471″ ID, 0.933″ OD, 0.057″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.475″ ID, 0.94″ OD, 0.056″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.243″ ID, 1.001″ OD, 0.007″ Thick
• Indexable Drill Insert: OP, Carbide AM300 Finish, 5/16″ Inscribed Circle, 5/32″ Thick, 1/32″ Corner Radius, Trigon
• Hex Nut: 5/16-18, Grade 9 Steel, Zinc-Plated Clear Chromate Right Hand Thread, 1/2″ Across Flats, ANSI & ASME B18.2.2
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.45″ ID, 0.63″ OD, 0.032″ Thick
• 1/4″ Stud, 18 to 14 AWG Compatible, Partially Insulated, Crimp Connection, Standard Fork Terminal Nylon Insulation, Blue, 600 Volts, Copper Contacts
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.472″ ID, 0.874″ OD, 0.054″ Thick
• Indexable Drill Insert: OP, Carbide AM300 Finish, 5/16″ Inscribed Circle, 5/32″ Thick, 1/32″ Corner Radius, Trigon
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.58″ ID, 0.716″ OD, 0.054″ Thick
• Plastic Bar: Acetal, 1/2″ Thick, Black Rockwell M-90
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.506″ ID, 0.743″ OD, 0.007″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.438″ ID, 0.749″ OD, 0.054″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.239″ ID, 0.473″ OD, 0.015″ Thick
• 5″ Dia, 80 Grit, Aluminum Oxide Coarse Grade, C-Weighted, Paper Backing
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.219″ ID, 0.562″ OD, 0.045″ Thick
• Straight-Flute & Die Drill Bits
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.225″ ID, 0.437″ OD, 0.016″ Thick
• Milling Chuck Accessories; Type: Wrench; For Use With: Mfr. No. 5867; Compatible Hole Diameter: 22.00 mm; Material: Steel; Accessory Type: Wrench
• Locker:
• Taper Length Drill Bit: 0.1516″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Flashlights; Bulb Type: LED; Type: Flashlight; Maximum Light Output (Lumens): 550; Body Type: Steel; Battery Size: AAA; Body Color: Orange; Rechargeable: No; Complete Light Output (Lumens): 550 (High); 120 (Low)
• Milling Chuck Accessories; Type: Wrench; For Use With: Mfr. No. 5867; Compatible Hole Diameter: 28.00 mm; Material: Steel; Accessory Type: Wrench
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.439″ ID, 0.626″ OD, 0.054″ Thick
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1258; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standar
• 4″ Screw Standard Flat Washer: Steel, Uncoated 1/4″ ID, 0.437″ OD, 0.056″ Thick
• Pivot Hinges; Finish/Coating: Satin Chrome; Type: Offset Hung Regular Standard-Duty Pivot; Hand: Left Hand; Leaf Height: 4-1/4; Length (Decimal Inch): 9.6250; Length (Inch): 9-5/8; Load Capacity (Lb.): 600.000; Minimum Door Thickness (Decimal Inch): 1.750
• Collet Screws, Nuts & Springs; Accessory Type: Tool Stop Screw; Compatible Collet Series: PMC32; Length (Decimal Inch): 2.3030 in; For Use With: BT50 PMC32; DIN50 PMC32
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.999″ OD, 0.039″ Thick
• Brass & Chrome Pipe Fittings; Fitting Type: Female x Male Hex Nipple; Fitting Size: 1-1/2 x 1-1/2; End Connections: FNPT x MNST; Material Grade: 360; Connection Type: Threaded; Pressure Rating (psi): 175; Fitting Shape: Straight; Thread Standard: NPT, NST
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.21″ ID, 0.349″ OD, 0.035″ Thick
• Die Drill Bit: 0.2210″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2″ OAL, Series 200
• Ball Grip Quick-Release Pin: L-Handle, 6 mm Pin Dia, 10 mm Usable Length 42.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.244″ ID, 0.467″ OD, 0.026″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC1.250; Compatible Hole Diameter: 1.2500 in; Material: Steel; Overall Length: 1.95; Accessory Type: Screw
• Die Drill Bit: 0.2280″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2″ OAL, Series 200
• Black Tee: 1 x 1/4 x 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.526″ ID, 0.686″ OD, 0.011″ Thick
• 120 Grit Aluminum Oxide Square Polishing Stone Coarse Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick, Oil Filled
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.687″ OD, 0.026″ Thick
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.236″ ID, 0.468″ OD, 0.028″ Thick
• 1/4″ Screw Standard Flat Washer: Steel, Uncoated 0.268″ ID, 0.366″ OD, 0.036″ Thick
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.454″ ID, 0.937″ OD, 0.054″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC20; Compatible Hole Diameter: 20.00 mm; Material: Steel; Overall Length: 0.71; Accessory Type: Screw
• Die Grinder Accessories; Accessory Type: Collet; For Use With: SM-52-5201; SM-50-5200; Collet Size: .25
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.626″ ID, 3/4″ OD, 0.021″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC32; Compatible Hole Diameter: 32.00 mm; Material: Steel; Overall Length: 3.05; Accessory Type: Screw
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.525″ ID, 3/4″ OD, 0.052″ Thick
• Plastic Sheet: Cast Acrylic, 1/4″ Thick, Clear, 8,000 psi Tensile Strength Rockwell M-95
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC0.750; Compatible Hole Diameter: 0.7500 in; Material: Steel; Overall Length: 0.85; Accessory Type: Screw
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.211″ ID, 1/2″ OD, 0.054″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC0.750; Compatible Hole Diameter: 0.7500 in; Material: Steel; Overall Length: 0.71; Accessory Type: Screw
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension Gray, HDPE, Vented
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.216″ ID, 0.687″ OD, 0.03″ Thick
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC32; Compatible Hole Diameter: 32.00 mm; Material: Steel; Overall Length: 2.91; Accessory Type: Screw
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.504″ ID, 0.924″ OD, 0.071″ Thick
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension Orange, HDPE, Vented
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC1.250; Compatible Hole Diameter: 1.2500 in; Material: Steel; Overall Length: 1.36; Accessory Type: Screw
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.38″ OD, 0.054″ Thick
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension Black, HDPE, Vented
• Air Tool & Air Compressor Oil; Container Size (Gal.): 275.00; Container Type: Tote; Food Grade: No; Flash Point (Deg F): 425.00
• Collet Screws, Nuts & Springs; Accessory Type: Tool Stop Screw; Compatible Collet Series: PMC20; Length (Decimal Inch): 0.8460 in; For Use With: C6 PMC20; HSKA100 PMC 20; HSKA63 PMC20; C8 PMC20
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.472″ ID, 0.925″ OD, 0.049″ Thick
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension Red, High Density Polyethylene, Vented
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1/2″ Thick, Beige Rockwell R-105
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.53″ ID, 0.687″ OD, 0.026″ Thick
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension White, HDPE, Vented
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1/2″ Thick, Beige Rockwell R-105
• Milling Chuck Accessories; Type: Screw; For Use With: Mfr. No. PMC1.250; Compatible Hole Diameter: 1.2500 in; Material: Steel; Overall Length: 1.91; Accessory Type: Screw
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.447″ ID, 0.661″ OD, 0.042″ Thick
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension Yellow, HDPE Vented
• Crowfoot Wrenches; Drive Size: 1/4; Wrench Size (mm): 24.00; Material: Steel
• #8-32, 0.7179″ OAL, 1/4″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.343″ Body Length, 3/8″ Thread Length, 3/16″ Thread Depth, Grade 12L14, Zinc-Plated
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.225″ ID, 1/2″ OD, 0.05″ Thick
• #8-32, 0.781″ OAL, 1/4″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.406″ Body Length, 3/8″ Thread Length, 1/4″ Thread Depth, Grade 12L14, Zinc-Plated
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension Blue, HDPE, Vented
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.444″ ID, 0.781″ OD, 0.057″ Thick
• #6-32, 0.5929″ OAL, 1/4″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.343″ Body Length, 1/4″ Thread Length, 3/16″ Thread Depth, Grade 12L14, Zinc-Plated
• Corner Chamfer End Mill: 0.3819″ Dia, 0.8661″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.87 mm OAL, AlTiN Coated, Centercutting
• Hard Hat: Construction, Full Brim, Class C, 4-Point Suspension Green, High Density Polyethylene, Vented
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.477″ ID, 3/4″ OD, 0.027″ Thick
• #10 Screw 9/32″ OAL 0.192″ ID x 5/16″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Hard Hat: Construction, Full Brim, Class E, 4-Point Suspension Orange, HDPE
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.381″ OD, 0.026″ Thick
• Spandex/Nylon/Polyester/Polyurethane/Lycra Work Gloves
• Die Drill Bit: 0.1969″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Hard Hat: Construction, Full Brim, Class E, 4-Point Suspension Gray, HDPE
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.453″ ID, 0.813″ OD, 0.027″ Thick
• Die Drill Bit: 0.2010″ Dia, 135 °, Solid Carbide Uncoated, 3/4″ Flute, 2″ OAL, Series 200