Products

• Indexable Spade Drill: 17 to 18 mm Dia, 27 mm Max Depth, Straight Flute 20 mm Shank Dia, Flanged Shank, 107.1 mm OAL
• Boring Head: 65 mm Body Dia, 83 mm Hole Dia, Manual 65 Integral Mount, Modular Connection Shank, Series eBore
• Manifolds; Inlet Size: 0.3750 in; Outlet Size: 0.3750 in; Number of Inlet Ports: 6; Number Of Outlet Ports: 6; Width (Decimal Inch): 3.0000 in; Overall Length (Inch): 5.0000 in; Overall Length (Decimal Inch): 5.0000 in; Height (Inch): 145 psi; Height (Inc
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: SN..33.; Toolholder Style: HSDNN; Rake: Negative; Multi-use Tool: No; Lead Angle: 45.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Width (
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.307″ OD, 0.027″ Thick
• Condensate Systems; Type: High Temperature Condensate Pump; Voltage: 208-230; Tank Capacity: 1 Gal.; GPM: 9.58; Outlet Size: 3/8; Gpm: 9.58; GPM @ 10 Feet of Head: 560; GPM @ 5 Feet of Head: 575; Frequency (Hz - 0 Decimals): 60; Horsepower: 1/3; For Use W
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.70; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18.5; Functional Length (mm): 6.46; P
• Indexable Spade Drill: 0.6693 to 0.7086″ Dia, 1-1/16″ Max Depth, Straight Flute Flanged Shank
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Feet; Plastic Board; Polymer Plastic Upright; Barricade Width (Inch): 72; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Weight (Lb.): 16.0000; Top Panel Heig
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDQNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 108.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Wid
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: SN..33.; Toolholder Style: HSSNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 45.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Coveralls & Overalls; Garment Style: Coveralls; Garment Type: General Purpose; Size: 3X-Large; Color: Olive Green; Material: Polyester; Hazardous Protection Level: Non Hazardous Protection; Closure Type: Zipper
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.37″ OD, 0.027″ Thick
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.60; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19.5; Functional Length (mm): 6.82; P
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: CN..43.; Toolholder Style: TCMNN; Rake: Negative; Multi-use Tool: No; Lead Angle: 80.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width (
• Coveralls & Overalls; Garment Style: Coveralls; Garment Type: General Purpose; Size: 3X-Large; Color: Navy Blue; Material: Polyester; Hazardous Protection Level: Non Hazardous Protection; Closure Type: Zipper
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.00; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19; Functional Length (mm): 6.46; Pri
• Laser Levels; Level Type: Rotary Laser; Laser Class: Class II; Laser Projection Orientation: Horizontal; Plumb Type: Up; Accuracy: 3/32 in at 30 ft; Power Source: Battery; Batteries Included: Yes; Battery Chemistry: Lithium
• Coveralls & Overalls; Garment Style: Coveralls; Garment Type: General Purpose; Size: 2X-Large; Color: Olive Green; Material: Polyester; Hazardous Protection Level: Non Hazardous Protection; Closure Type: Zipper
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.80; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19.5; Functional Length (mm): 6.82; P
• 12″ x 2-1/2″ x 1-3/4″ 420 ESR Stainless Steel Rectangular Rod +.125/+.375 Length Tolerance, +.060/+.187 Width Tolerance, +.015/+.055 Thickness Tolerance
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: HWLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Width
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 0.28″ OD, 0.027″ Thick
• Portable Power Generators; Fuel Type: Electric; Starting Method: Electric; Running Watts: 200; Run Time Half Load: 3 hr; Number Of Outlets: 1.000; Generator Outlet Type: 120 V AC Duplex; Features: Equipped with 120V A.C. outlet + charger, two USB-A ports
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.50; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18; Functional Length (mm): 6.46; Pri
• Level Accessories; Type: Tripod; For Use With: Laser Set-Up And Positioning; Material: Aluminum; Color: Red; Overall Height: 39.33 in; Length (Inch): 7.91 in
• Replaceable Tip Drill: 0.63 to 0.665'' Drill Dia, 2.027″ Max Depth, 0.75'' Straight-Cylindrical Shank Uses H3P Inserts, 5.17″ OAL, Through Coolant
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: HCKNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 15.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 0.749″ OD, 0.027″ Thick
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: HCBNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Solid Carbide, AlCrN Finish Series TC470
• Micro Drill Bit: 0.1181″ Dia, 140 °, Solid Carbide TiALN Lite Finish, 2.4016″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Level Accessories; Type: Remote Control & Receiver; For Use With: Steel Stud Layout, Drop Ceiling Layout, Soffit Layout, Layout Of Material, General Layout; Material: Plastic; Color: Red, Black; Overall Height: 7.24 in; Length (Inch): 3.35 in
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Vinyl, Heavy-Duty Smooth Surface
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.173″ ID, 0.51″ OD, 0.035″ Thick
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Vinyl, Heavy-Duty Smooth Surface
• Cordless Work Light: 12V, 1,200 Lumens 15 hr Run Time
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.10; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19; Functional Length (mm): 6.82; Pri
• Vinyl, Heavy-Duty Smooth Surface
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.373″ OD, 0.035″ Thick
• Indexable Cut-Off Toolholders; Toolholder Style: RGER; Multi-use Tool: Yes; Compatible Insert Size Code: 2; Insert Holding Method: Clamp; Series: RGER/L; Cutting Tool Application: Grooving; Parting; Primary Workpiece Material: Universal; Overall Length: 6
• Vinyl, Heavy-Duty Smooth Surface
• Indexable Cut-Off Toolholders; Toolholder Style: RGER; Multi-use Tool: Yes; Compatible Insert Size Code: 3; Insert Holding Method: Clamp; Series: RGER/L; Cutting Tool Application: Grooving; Parting; Primary Workpiece Material: Universal; Overall Length: 6
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Vinyl, Heavy-Duty Smooth Surface
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.622″ OD, 0.026″ Thick
• Indexable Cut-Off Toolholders; Toolholder Style: RGEL; Multi-use Tool: Yes; Compatible Insert Size Code: 2; Insert Holding Method: Clamp; Series: RGER/L; Cutting Tool Application: Grooving; Parting; Primary Workpiece Material: Universal; Overall Length: 6
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: TDJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank W
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.30; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19; Functional Length (mm): 6.82; Pri
• Level Accessories; Type: Mount; For Use With: Drop Ceiling Layout, Soffit Layout; Material: Plastic; Color: Black; Overall Height: 15 in; Length (Inch): 10.75 in
• Vinyl, Heavy-Duty Smooth Surface
• Broaching Inserts; Cutting Width: 16.00; Maximum Depth of Cut: 8.00; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: No
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.156″ ID, 0.559″ OD, 0.035″ Thick
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.90; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18.5; Functional Length (mm): 6.46; P
• Broaching Inserts; Cutting Width (Decimal Inch): 0.5625; Maximum Depth of Cut (Decimal Inch): 0.2750; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: No
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9284; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.10; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18; Functional Length (mm): 6.46; Pri
• Broaching Inserts; Cutting Width (Decimal Inch): 0.5625; Maximum Depth of Cut (Decimal Inch): 0.2670; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: Yes
• Free Standing Stanchion Post: 40″ High, 2-1/2″ Dia, Steel Post Concrete Dome Base
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0364; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.20; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19; Functional Length (mm): 6.82; Pri
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.499″ OD, 0.054″ Thick
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: SN..33.; Toolholder Style: HSKNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Broaching Inserts; Cutting Width (Decimal Inch): 0.6250; Maximum Depth of Cut (Decimal Inch): 0.3120; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: No
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.17″ ID, 0.314″ OD, 0.026″ Thick
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.30; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18; Functional Length (mm): 6.46; Pri
• Broaching Inserts; Cutting Width: 14.00; Maximum Depth of Cut: 4.71; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: Yes
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9199; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Broaching Inserts; Cutting Width (Decimal Inch): 0.5625; Maximum Depth of Cut (Decimal Inch): 0.2750; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: No
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.90; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19.5; Functional Length (mm): 6.82; P
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9066; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Broaching Inserts; Cutting Width (Decimal Inch): 0.6250; Maximum Depth of Cut (Decimal Inch): 0.3024; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: Yes
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.70; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19.5; Functional Length (mm): 6.82; P
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCKNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• 1-1/16 x 8-1/2″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Broaching Inserts; Cutting Width (Decimal Inch): 0.6250; Maximum Depth of Cut (Decimal Inch): 0.3120; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: No
• Spray Paints
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.80; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18.5; Functional Length (mm): 6.46; P
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.316″ OD, 0.026″ Thick
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: RC..1003; Toolholder Style: PRGCL; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Wid
• 1-3/64 x 8-1/2″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Broaching Inserts; Cutting Width: 14.00; Maximum Depth of Cut: 7.00; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: No
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.10; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19; Functional Length (mm): 6.82; Pri
• Broaching Inserts; Cutting Width (Decimal Inch): 0.5625; Maximum Depth of Cut (Decimal Inch): 0.2750; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: No
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: RC..1204; Toolholder Style: PRGCL; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Wid
• 27/32 x 8-1/2″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.267″ OD, 0.012″ Thick
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 19.30; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 19; Functional Length (mm): 6.82; Pri
• Broaching Inserts; Cutting Width (Decimal Inch): 0.6250; Maximum Depth of Cut (Decimal Inch): 0.3120; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: No
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: RC..1003; Toolholder Style: PRGCR; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Wi
• 25/32 x 8-1/2″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.40; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18; Functional Length (mm): 6.46; Pri
• Broaching Inserts; Cutting Width: 14.00; Maximum Depth of Cut: 7.00; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: No
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.094″ ID, 0.501″ OD, 0.027″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9151; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 29/32 x 8-1/2″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.20; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18; Functional Length (mm): 6.46; Pri
• Broaching Inserts; Cutting Width (Decimal Inch): 0.5625; Maximum Depth of Cut (Decimal Inch): 0.2750; Insert Thickness (Decimal Inch): 0.7086; Insert Length (Decimal Inch): 0.8661; Chamfer: No
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: HWLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Broaching Inserts; Cutting Width: 16.00; Maximum Depth of Cut: 5.53; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: Yes
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 18.60; Point Angle: 135; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: H3P; Coating Process: PVD; Insert Seat Size: 18.5; Functional Length (mm): 6.46; P
• 9/16 x 8-1/2″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Standard Flat Washer: Steel, Uncoated 0.055″ ID, 0.437″ OD, 0.035″ Thick
• Broaching Inserts; Cutting Width: 16.00; Maximum Depth of Cut: 8.00; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: No
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: XN..3.52.5.; Toolholder Style: TXJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank W
• 19/32 x 8-1/2″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Broaching Inserts; Cutting Width: 14.00; Maximum Depth of Cut: 7.00; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: No
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: XN..3.52.5.; Toolholder Style: TXJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank
• Broaching Inserts; Cutting Width: 26.00; Insert Thickness: 18.00; Insert Length (mm): 30.00; Chamfer: No
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.291″ OD, 0.029″ Thick
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: XN..2.73.; Toolholder Style: TXJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Wid
• Fall Protection Harnesses: 400 Lb, Vest Style, Size X-Large, Polyester Friction Shoulder Strap, Quick-Connect Chest Strap
• Jackets & Coats; Garment Style: Jacket; Size: 3X-Large; Material: Leather; Closure Type: Button; Flame Retardant: Yes; Number Of Pockets: 2.000; Flame Resistant: Yes
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: XN..2.73.; Toolholder Style: TXJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Wi
• 1″ Screw 3/4″ OAL 1″ ID x 2″ OD Round Stainless Steel Circuit Board Spacers Passivated, Grade 316, Female Unthreaded
• Broaching Inserts; Cutting Width: 14.00; Maximum Depth of Cut: 7.00; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: No
• 3/4″ Screw 2-1/4″ OAL 3/4″ ID x 1-1/2″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.281″ OD, 0.021″ Thick
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: XN..3.52.5.; Toolholder Style: TXQNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 100.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank
• Broaching Inserts; Cutting Width: 16.00; Maximum Depth of Cut: 6.00; Insert Thickness: 13.10; Insert Length (mm): 18.50; Chamfer: No
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: XN..3.52.5.; Toolholder Style: TXQNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 100.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank
• Broaching Inserts; Cutting Width: 16.00; Maximum Depth of Cut: 8.00; Insert Thickness: 18.00; Insert Length (mm): 22.00; Chamfer: No
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.092″ ID, 0.405″ OD, 0.009″ Thick
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: XN..2.73.; Toolholder Style: TXQNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 100.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank W
• Formula 11263 Low-Foam Stripper and Rust Remover
• Plastic Sheet: Acetal, 2-1/4″ Thick, Black Rockwell M-90
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: XN..2.73.; Toolholder Style: TXQNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 100.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Wi
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.154″ ID, 1/4″ OD, 0.041″ Thick
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..43.; Toolholder Style: TCRNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Adapter Back Plate for 12-1/2″ Diam Self Centering Lathe Chucks L-2 Mount, 5-1/4″ Through Hole Diam, 11.26mm ID, 12.4″ OD, 0.91″ Flange Height, Steel
• Plastic Sheet: Ultem Polyetherimide, 1″ Thick, Amber Rockwell M-109
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: TN..2.53.; Toolholder Style: HTGNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 91.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Wid
• Indexable Grooving Toolholder: KGDR12X4T25S, External Right Hand, 3/4″ Shank Width, No
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 16.00; Drill Diameter (Decimal Inch): 0.6299; Maximum Drill Diameter (Decimal Inch): 0.6299; Drill Diameter (mm): 16.00; Maximum Drill Depth (Decimal Inch): 6.7795; Maximum Drill Depth
• Plastic Sheet: Carbon Fiber (Unidirectional), 1/8″ Thick, Black, 120,000 psi Tensile Strength 120,000 psi Tensile Strength, 0 to 180°F
• Indexable Grooving Toolholder: KGDL12X4T25S, External Left Hand, 3/4″ Shank Width, No
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: TN..2.53.; Toolholder Style: HTGNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 91.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Wi
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.152″ ID, 0.303″ OD, 0.016″ Thick
• Cordless Impact Wrench: 20V, 1/4″ Drive, 3,500 BPM, 2,800 RPM 2 V20 Battery Included, Charger Included
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (Inch): 11/16; Drill Diameter (Decimal Inch): 0.6870; Maximum Drill Diameter (Decimal Inch): 0.6870; Drill Diameter (Inch): 11/16; Maximum Drill Depth (Decimal Inch): 7.1700; Maximum Drill D
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 50.0000; Material: 4340 Steel; Finish: Black Oxide; Head Diameter (Decimal Inch): 3.0000; Shank Length (Decimal Inch): 2.45 in; Maximum Holding Force: 20000 lb; Key Size: 0.37
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9940; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Cordless Hammer Drill: 20V, 1/2″ Chuck, 25,500 BPM, 1,500 RPM Keyless Chuck, Reversible, 2 Lithium-ion, Charger Included
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 16.50; Drill Diameter (Decimal Inch): 0.6496; Maximum Drill Diameter (Decimal Inch): 0.6496; Drill Diameter (mm): 16.50; Maximum Drill Depth (Decimal Inch): 6.7795; Maximum Drill Depth
• Laminate Dry Erase: 42" Wide, 26" High, Melamine, Woodland Green
• Cordless Drill: 20V, 1/2″ Chuck, 1,900 RPM Keyless Chuck, Reversible, 2 Lithium-ion Battery Included, Charger Included
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.145″ ID, 0.751″ OD, 0.055″ Thick
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 17.00; Drill Diameter (Decimal Inch): 0.6693; Maximum Drill Diameter (Decimal Inch): 0.6693; Drill Diameter (mm): 17.00; Maximum Drill Depth (Decimal Inch): 7.1732; Maximum Drill Depth
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: HCKNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 15.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Width
• Cordless Impact Wrench: 20V, 1/4″ Drive, 3,100 BPM, 2,800 RPM 2 V20 Battery Included, Charger Included
• Indexable Copy Face Mills; Maximum Depth Of Cut: 0.3750 in; Compatible Insert Size Code: RCL.1906; Arbor Hole Diameter (mm): 1.50; Maximum Ramping Angle: 4.5 ™; Overall Height (mm): 2.4800 in; Series: 5W6N; Number of Cutter Inserts: 6; Cutter Style: 5W6N
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: HCBNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Width
• Helical Flute Thread Mill: 7/8-9, Internal, 5 Flute, Solid Carbide 9 TPI, AlTiN Coated
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.167″ ID, 0.383″ OD, 0.034″ Thick
• Power Tool Battery: 20V, Lithium-ion 6 Ah, Series 20V MAX
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: HCLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Width
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..43.; Toolholder Style: TCRNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.147″ ID, 0.562″ OD, 0.021″ Thick
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Collet Chuck: 1 to 16 mm Capacity, ER Collet, 25 mm Shank Dia, Straight Shank 50 mm Projection, 0.003 mm TIR, Through Coolant
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.103″ ID, 0.329″ OD, 0.027″ Thick
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 50.0000; Material: 4340 Steel; Finish: Black Oxide; Head Diameter (Decimal Inch): 75.0000; Shank Length (Decimal Inch): 64 mm; Maximum Holding Force: 88 kN; Key Size: 10.000;
• Taper Length Drill Bit: 0.9062″ Dia, 118 ° Bright/Uncoated, 7″ Flute Length
• Collet Chuck: 0.5 to 10 mm Capacity, ER Collet, Straight Shank 38 mm Projection, 0.003 mm TIR, Through Coolant
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.168″ ID, 0.511″ OD, 0.033″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.49″ OD, 0.021″ Thick
• Kyocera S40DRV480M214, DRV Magic Drill 48.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Shrink Fit Tool Holder & Adapter
• Sheet: Silicone Rubber, 1/8″ Thick, 12″ Wide, 24″ Long, Orange-Red Durometer 20, Plain Backing
• Kyocera S40DRV490M214, DRV Magic Drill 49.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.312″ OD, 0.016″ Thick
• Abrasive Belt: 6" Wide, 335" OAL, 100 Grit, Aluminum Oxide
• Abrasive Belt: 6" Wide, 335" OAL, 80 Grit, Aluminum Oxide
• All-Purpose Cleaner: 5 gal Pail Liquid, Pleasant Scent
• Kyocera S40DRV470M214, DRV Magic Drill 47.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Kyocera S40DRV460M214, DRV Magic Drill 46.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Manual Flush Valves; Style: Closet; Gallons Per Flush: 3.5; Pipe Size: 1; 1 in; Spud Coupling Size: 1-1/2; Style: Closet; Iron Pipe Size: 1; 1 in; Pipe Size: 1 in; Valve Type: Closet
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.247″ OD, 0.026″ Thick
• Kyocera S40DRV430M214, DRV Magic Drill 43.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Manual Flush Valves; Style: Urinal; Gallons Per Flush: 1.5; Pipe Size: 3/4; Spud Coupling Size: 3/4; Style: Urinal; Iron Pipe Size: 3/4; Valve Type: Urinal
• Electric Circular Saws; Amperage: 14.0000; Blade Diameter Compatibility: 7.25; Speed (RPM): 5,500 RPM; Arbor Size (mm): 15.875 mm; Amperage: 14.0000; Arbor Size: 15.875 mm; Maximum Speed: 5,500 RPM
• Kyocera S40DRV420M214, DRV Magic Drill 42.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Kyocera S40DRV410M214, DRV Magic Drill 41.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Tile and Grout Cleaner Alkaline Cleaner Designed for Bath, Restroom, and Shower Cleaning
• Standard Flat Washer: Steel, Uncoated 0.073″ ID, 0.622″ OD, 0.026″ Thick
• Kyocera S40DRV400M214, DRV Magic Drill 40.00mm Cutting Diameter, 40.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Indexable High-Feed Face Mills; Cutting Diameter (mm): 11.25; Cutting Diameter (Decimal Inch): 0.442913; Maximum Depth of Cut (mm): 0.8; Maximum Depth of Cut (Decimal Inch): 0.0315; Shank Diameter (mm): 11.25; Series: CoroMill MH20; Cutter Style: MH20-AR.
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8120; Drill Diameter (Inch): 13/16; Maximum Drill Depth (Decimal Inch): 4.1340; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diamete
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: CTN; Rake: Negative; Rake Angle: -6; Multi-use Tool: Yes; Lead Angle: 0.0; Insert Holding Method: Top Clamp; Shank Width (Decimal Inch): 0.9843; Insert Compatibility: RNM42 ™; Sha
• Indexable High-Feed Face Mills; Cutting Diameter (mm): 15.8; Cutting Diameter (Decimal Inch): 0.622047; Maximum Depth of Cut (mm): 1.2; Maximum Depth of Cut (Decimal Inch): 0.0472; Shank Diameter (mm): 15.8; Series: CoroMill MH20; Cutter Style: MH20-AR..O
• Indexable Turning Toolholders; Hand of Holder: Neutral; Toolholder Style: CTN; Rake: Negative; Rake Angle: -8.5; Multi-use Tool: Yes; Lead Angle: 0.0; Insert Holding Method: Top Clamp; Shank Width (Decimal Inch): 0.9843; Insert Compatibility: RNM42 ™; Sha
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8430; Drill Diameter (Inch): 27/32; Maximum Drill Depth (Decimal Inch): 4.3310; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diamete
• Taper Length Drill Bit: 0.3661″ Dia, 135 ° TX Finish, 3.7402″ Flute Length, 5.5905″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Indexable Turning Toolholders; Hand of Holder: Neutral; Toolholder Style: CTN; Rake: Negative; Rake Angle: -8.5; Multi-use Tool: Yes; Lead Angle: 0.0; Insert Holding Method: Top Clamp; Shank Width (Decimal Inch): 0.9843; Insert Compatibility: RNM32 ™; Sha
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8280; Drill Diameter (Inch): 53/64; Maximum Drill Depth (Decimal Inch): 4.1340; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diamete
• Taper Length Drill Bit: 0.3701″ Dia, 135 ° TX Finish, 3.7402″ Flute Length, 5.5905″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.265″ OD, 0.012″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.9060; Drill Diameter (Inch): 29/32; Maximum Drill Depth (Decimal Inch): 4.5280; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diamete
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.8750; Drill Diameter (Inch): 7/8; Maximum Drill Depth (Decimal Inch): 4.5280; Shank Type: Weldon; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Drill Diameter
• Traffic Barricades; Type: A-Frame; Barricade Height (Inch): 40; Material: Plastic; Barricade Width (Inch): 29; Reflective: Yes; Compliance: None; Color: White; Weight (Lb.): 6.0000; Top Panel Height (Inch): 8; Top Panel Width (Inch): 72; Bottom Panel Heig
• Megawash All Climate Car Wash
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.165″ ID, 0.389″ OD, 0.027″ Thick
• Foaming Tire & Engine Cleaner Self-Service Tire & Engine Cleaner
• Nylon Tube: 1/4″ ID, 3/8″ OD, 100' Long 500 Max psi, Yellow
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.322″ OD, 0.018″ Thick
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 14.00; Drill Diameter (Decimal Inch): 0.5512; Maximum Drill Diameter (Decimal Inch): 0.5512; Drill Diameter (mm): 14.00; Maximum Drill Depth (Decimal Inch): 1.0886; Maximum Drill Depth
• Plastic Sheet: Acetal, 1″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.253″ OD, 0.012″ Thick
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 14.50; Drill Diameter (Decimal Inch): 0.5710; Maximum Drill Diameter (Decimal Inch): 0.5710; Drill Diameter (mm): 14.50; Maximum Drill Depth (Decimal Inch): 27.9500; Maximum Drill Dept
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 14.00; Drill Diameter (Decimal Inch): 0.5510; Maximum Drill Diameter (Decimal Inch): 0.5510; Drill Diameter (mm): 14.00; Maximum Drill Depth (Decimal Inch): 27.6500; Maximum Drill Dept
• Modular Grooving Head: Left Hand, Cutting Head, System Size C6, Uses LC.. Size 1603 Inserts 0.591″ Max Depth of Cut, Through Coolant, Series C6-CFML-45080-03JETI
• Modular Grooving Head: Left Hand, Cutting Head, System Size C6, Uses LC.. Size 1604 Inserts 0.787″ Max Depth of Cut, Through Coolant, Series C6-CFML-45080-04JETI
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.095″ ID, 0.312″ OD, 0.042″ Thick
• Modular Grooving Head: Left Hand, Cutting Head, System Size C6, Uses LC.. Size 1605 Inserts 0.984″ Max Depth of Cut, Through Coolant, Series C6-CFML-45080-05JETI
• Modular Grooving Head: Left Hand, Cutting Head, System Size C6, Uses LC.. Size 1606 Inserts 1.181″ Max Depth of Cut, Through Coolant, Series C6-CFML-45085-06JETI
• Modular Grooving Head: Right Hand, Cutting Head, System Size C6, Uses LC.. Size 1603 Inserts 0.591″ Max Depth of Cut, Through Coolant, Series C6-CFMR-45080-03JETI
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.376″ OD, 0.026″ Thick
• Modular Grooving Head: Right Hand, Cutting Head, System Size C6, Uses LC.. Size 1604 Inserts 0.787″ Max Depth of Cut, Through Coolant, Series C6-CFMR-45080-04JETI
• Modular Grooving Head: Right Hand, Cutting Head, System Size C6, Uses LC.. Size 1605 Inserts 0.984″ Max Depth of Cut, Through Coolant, Series C6-CFMR-45080-05JETI
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 45.042 mm; Inside Diameter (mm): 35 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• Modular Grooving Head: Right Hand, Cutting Head, System Size C6, Uses LC.. Size 1606 Inserts 1.181″ Max Depth of Cut, Through Coolant, Series C6-CFMR-45085-06JETI
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.163″ ID, 0.718″ OD, 0.066″ Thick
• Cordless Drill: 1/2″ Chuck, 1,500 RPM Keyless Chuck, Reversible
• 0.394″ Max Depth, 0.079 to 0.787″ Width, External Left Hand Indexable Grooving/Cutoff Toolholder 4.331″ OAL, 12mm Shank Height, Uses SA 24-20\x85 Inserts, HSA Monoblock Toolholder, Series SA Parting / Grooving
• Demolition Hammer: 2,650 BPM Electric, 120V, 10A
• 0.394″ Max Depth, 0.079 to 0.787″ Width, External Left Hand Indexable Grooving/Cutoff Toolholder 4.331″ OAL, 10mm Shank Height, Uses SA 24-20\x85 Inserts, HSA Monoblock Toolholder, Series SA Parting / Grooving
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.098″ ID, 0.246″ OD, 0.016″ Thick
• Cordless Drill: 7/16″ Chuck, 1,500 RPM Hex Chuck, Reversible
• Handheld Buffers & Polishers; Type: Polisher; Product Type: Polisher; Handle Type: D-Handle; Pad Diameter: 5″; Spindle Thread Size: 5/8-11; Reversible: No; Voltage: 110.00; Amperage: 11.0000; Spindle Thread (mm): 5/8-11; Spindle Thread (Inch): 5/8-11; Amp
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.374″ OD, 0.027″ Thick
• Extension Tap: 5/8-11, 3 Flutes, TiCN Finish, Cobalt, Long Reach 4-5 P, 8.82″ OAL, 1.063″ Thread Length, 2B & 3B Class of Fit
• Indexable Square-Shoulder End Mill: ESE3025R, 25.0000'' Shank Dia, Straight Shank Uses 1, No, 115.00 mm OAL
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.438″ OD, 0.035″ Thick
• Hex Head Cap Screw: 7/8-9 x 6″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/4″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.162″ ID, 0.582″ OD, 0.042″ Thick
• Multipurpose Lubricants & Penetrants
• Compression Packing; Material: PTFE; Size: 1/4; Spool Length: 25; Color: White; Maximum Working Pressure (psi): 1000; 1000.0 psi; PSC Code: 5330; Color: White; Material: PTFE; Maximum Working Pressure: 1000.0 psi; Material: PTFE
• Pushbutton Switches; Switch Type: Pushbutton Switch with Timer; Pushbutton Type: Mushroom Head; Pushbutton Shape: Round; Pushbutton Color: Red; Operator Illumination: NonIlluminated; Amperage (mA): 10; Contact Form: 1NO/1NC; Standards Met: UL 294 listed;
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 0.496″ OD, 0.007″ Thick
• All-Purpose Cleaner: 1 gal Pump Spray Bottle Liquid, Citrus Scent
• Penetrant & Lubricant: 10 oz Aerosol Can White
• FS Concentrated Foaming Acid Heavy-Duty Acid Cleaning
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.424″ OD, 0.04″ Thick