Products

• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.376″ OD, 0.054″ Thick
• Modular Grooving Head: Right Hand, Cutting Head, System Size C6, Uses LC.. Size 1606 Inserts 1.417″ Max Depth of Cut, Through Coolant, Series C6-CFOR-45100-06-JETI
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.2283; Diameter (mm): 31.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y301H; Insert Seat Size: S30; Coolant Through: No; Coating/Finish: H-Coating; I
• Modular Grooving Head: Right Hand, Cutting Head, System Size C6, Uses LC.. Size 3008 Inserts 1.89″ Max Depth of Cut, Through Coolant, Series C6-CFOR-45115-08-JETI
• 3/4″ Screw 3″ OAL 3/4″ ID x 1-1/2″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.093″ ID, 0.279″ OD, 0.027″ Thick
• Corner Chamfer End Mill: 18.00 mm Dia, 19.00 mm LOC, 5 Flute, 0.35 mm Chamfer Width, Solid Carbide
• Compressed Air Regulator: 3/8″ NPT, 300 Max psi, Standard 228 CFM
• Replaceable Tip Drill: 13.5 to 13.9 mm Drill Dia, 250 mm Max Depth, Modular Connection Shank Uses HCP Inserts, 337.5 mm OAL, Through Coolant
• Corner Chamfer End Mill: 18.00 mm Dia, 35.00 mm LOC, 5 Flute, 0.35 mm Chamfer Width, Solid Carbide
• Fish Tape Accessories; Accessory Type: Steel Tape; Number of Pieces: 1; For Use With: Steel Fish Tape Drum; Material: Steel; Inside Diameter (Inch): 0.1250
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.106″ ID, 0.28″ OD, 0.027″ Thick
• Portable Work Lights; Light Technology: LED; Bulb Type: LED; Run Time: 12 h
• Replaceable Tip Drill: 13 to 13.4 mm Drill Dia, 250 mm Max Depth, Modular Connection Shank Uses HCP Inserts, 337.5 mm OAL, Through Coolant
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 90 mm; Housing Material: Stainless Steel; Lock Type: Eccentric; Static Load Capacity: 1225.00; Number Of Bolts: 2; Maximum RPM: 2440.000; Series: HCFLSS;
• Laser Levels; Level Type: Rotary Laser; Laser Class: Class II; Laser Projection Orientation: Horizontal; Plumb Type: Up; Accuracy: 3/32 in at 30 ft; Power Source: Battery; Batteries Included: Yes; Battery Chemistry: Lithium
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 0.249″ OD, 0.026″ Thick
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.168″ ID, 0.484″ OD, 0.054″ Thick
• Household Trash Bag: 13 gal, 0.9 mil, Pack of (270) 24″ Wide, 27″ High, Plastic, White
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 3/8″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.415″ OD, 0.035″ Thick
• Hand Sanitizer: Gel, 1.2 L, Dispenser Refill
• Motion Sensors; Mounting Type: Door Mount; Sensor Type: Smart Motion Sensor; Coverage (Sq. Ft.): 20; Voltage: 12-28; Amperage: 0.05; Color: White; Overall Length (Decimal Inch): 1-3/4; Overall Width (Decimal Inch): 7-1/8; Overall Height (Decimal Inch): 1-
• Data Port Receptacles; Receptacle Configuration: Ethernet; Number of Ports: 5; Number of Power Receptacles: 1; Number of Switches: 5; Mounting Type: DIN Rail Mount; Color: Black; Overall Depth (Decimal Inch): 3.7400; Overall Depth (mm): 95.00; Overall Len
• Motion Sensors; Mounting Type: Door Mount; Sensor Type: Smart Request to Exit Motion Sensor; Coverage (Sq. Ft.): 20; Voltage: 12-28; Amperage: 0.05; Color: White; Overall Length (Decimal Inch): 1-3/4; Overall Width (Decimal Inch): 7-1/8; Overall Height (D
• Cutting & Grinding Fluid: 5 gal Bucket Use on All Metal except Magnesium, Amber
• Windshield Washer Fluid: 55 gal, Drum Flammable, 42 VOC Compliant
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 1″ OD, 0.045″ Thick
• Cutting Fluid: 5 gal Bucket Use on Stainless Steel, High Carbon Steel & Ferrous Metal, Clear Amber
• Metering Pump Accessories; Type: Seal Kit; For Use With: CRP750V400CRK; Length (Decimal Inch): 7.0000; For Use With: CRP750V400CRK
• Fish Tape Accessories; Accessory Type: Non-Conductive Tape; Number of Pieces: 1; For Use With: Non-Conductive Fish Tape Drum; Material: Polyester; Inside Diameter (Inch): 0.1250
• Cutting & Grinding Fluid: 5 gal Bucket Use on Most Metal except Magnesium & Cast Iron, Blue
• All-Purpose Cleaner: 5 gal Pail Liquid Concentrate, Mild Scent
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.35″ OD, 0.03″ Thick
• All-Purpose Cleaner: 5 gal Pail Liquid Concentrate, Citrus Scent
• Pin & Sleeve Receptacles; Receptacle/Part Type: Receptacle; Pin Configuration: 4; Number of Poles: 3; IEC Pin & Sleeve Style: IEC 60309-2; IEC 60309-1; Amperage: 100 A; Hub Size (Inch): 1 in; Resistance Features: Water-Tight; Number Of Phases: 3; Number O
• Replaceable Tip Drill: 15 to 15.99 mm Drill Dia, 24 mm Max Depth, 16 mm Straight-Cylindrical Shank Seat Size 15, 95 mm OAL, Through Coolant
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 92 mm; Housing Material: Stainless Steel; Lock Type: Set Screw; Static Load Capacity: 2800.00; Number Of Bolts: 4; Maximum RPM: 4300.000; Series: UCFSS;
• All-Purpose Cleaner: 1 gal Bottle Liquid Concentrate, Citrus Scent
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.173″ ID, 0.746″ OD, 0.027″ Thick
• All-Purpose Cleaner: 1 gal Bottle Liquid Concentrate, Mild Scent
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 92 mm; Housing Material: Stainless Steel; Lock Type: Set Screw; Static Load Capacity: 2800.00; Number Of Bolts: 4; Maximum RPM: 4300.000; Series: UCFSS;
• Troffers; Lamp Type: LED; Troffer Size (Feet): 1x4; Number of Lamps: 1; Troffer Material: Aluminum; Diffuser Material: Acrylic; Wattage: 39; Voltage: 120-277 V; Diffuser Color: White; Ballast Type: Electronic; PSC Code: 6210
• Cordless Circular Saws; Voltage: 40.00; Battery Chemistry: Lithium-ion; Blade Diameter Compatibility: 7.25; Tool Compatibility: Circular Saw; Battery Included: Yes; Speed (RPM): 6,000 RPM; Voltage: 40.00; Maximum Speed: 6,000 RPM
• Standard Flat Washer: Steel, Uncoated 0.071″ ID, 0.251″ OD, 0.026″ Thick
• Shrink Fit Tool Holder & Adapter
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.6299; Drill Diameter (mm): 16.00; Maximum Drill Depth (mm): 32.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• 1-3/4″ Reamer Diam, 4MT Morse Taper Shank, Bridge Reamer Spiral Flute, 13″ Long, Right Hand Cut, Left Hand Spiral, High Speed Steel
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.246″ OD, 0.027″ Thick
• Plastic Sheet: Garolite, 1/4″ Thick, Off-White, 18,000 psi Tensile Strength Rockwell M-100
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.6496; Drill Diameter (mm): 16.50; Maximum Drill Depth (mm): 33.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.6102; Drill Diameter (mm): 15.50; Maximum Drill Depth (mm): 31.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Plastic Sheet: Garolite, 1/4″ Thick, Off-White, 18,000 psi Tensile Strength Rockwell M-100
• 1″ Screw Standard Flat Washer: Steel, Uncoated 0.082″ ID, 0.307″ OD, 0.016″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.5906; Drill Diameter (mm): 15.00; Maximum Drill Depth (mm): 30.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Corner Chamfer End Mill: 20.00 mm Dia, 19.00 mm LOC, 5 Flute, 0.40 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.5512; Drill Diameter (mm): 14.00; Maximum Drill Depth (mm): 28.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Corner Chamfer End Mill: 20.00 mm Dia, 40.00 mm LOC, 5 Flute, 0.40 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.5709; Drill Diameter (mm): 14.50; Maximum Drill Depth (mm): 29.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.432″ OD, 0.027″ Thick
• Indexable Square-Shoulder End Mill: MEV32S32062003T, 1.2598'' Cut Dia, Cylindrical Shank Uses 3, Through Coolant, 200.00 mm OAL
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.142″ ID, 0.267″ OD, 0.026″ Thick
• Indexable Broaching Accessories; Accessory Type: Centering Plate; For Use With: Size 18/25 Tool Holder; Additional Information: 26X70MM
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 0.252″ OD, 0.027″ Thick
• Insert Bearings; Outside Diameter: 100 mm; Outside Diameter (Inch): 100 mm; Outside Diameter (Decimal Inch): 100 mm; Cage Material: Stainless Steel; Overall Width (Inch): 56; Width (mm): 56; Race Width: 25.0000; Bearing Bore Diameter: 2 in; Dynamic Load C
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.628″ OD, 0.025″ Thick
• Plastic Bar: Acetal, 2″ Thick, Black Rockwell M-90
• Plastic Sheet: Acetal, 1/16″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Plastic Bar: Polytetrafluoroethylene, 1/2″ Thick, White
• Indexable High-Feed End Mill: 0.438″ Cut Dia, 0.41″ Modular Shank Uses 2 UNLU Inserts, 0.02″ Max Depth, 0.67″ OAL, Through Coolant
• Taper Length Drill Bit: 0.3780″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Plastic Sheet: Ultem Polyetherimide, 1/2″ Thick, Amber Rockwell M-109
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.371″ OD, 0.035″ Thick
• Taper Length Drill Bit: 0.3819″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1-1/4″ Thick, White, 4,250 psi Tensile Strength Shore D-70
• Welding Helmet: Black & White, Nylon, Shade 10
• All-Purpose Cleaner: 55 gal Drum Liquid, Low Odor Scent
• Indexable High-Feed End Mill: 0.438″ Cut Dia, 0.438″ Cylindrical Shank Uses 2 UNLU Inserts, 0.02″ Max Depth, 4″ OAL, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.345″ OD, 0.054″ Thick
• Plastic Sheet: Nylon 6/6, 3/4″ Thick, Off-White, 10,000 psi Tensile Strength Rockwell M-85
• 3/8″ Screw 1″ OAL 0.38″ ID x 3/4″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• 5/16″ Screw 1″ OAL 0.315″ ID x 3/4″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Indexable High-Feed End Mill: 10 mm Cut Dia, 0.39 mm Cylindrical Shank Uses 2 UNLU Inserts, 0.5 mm Max Depth, 100 mm OAL, Through Coolant
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.377″ OD, 0.054″ Thick
• Linear Motion Systems; Type: Roller Carriage; Overall Width (mm): 22.0000; Overall Length (mm): 70.0000; Carriage Height: 17.500; Carriage Length: 70.00; Carriage Width: 22.00; Height (mm): 17.5000
• All-Purpose Cleaner: 1 gal Bottle Liquid, Lemon Scent
• Corner Chamfer End Mill: 25.00 mm Dia, 50.00 mm LOC, 5 Flute, 0.50 mm Chamfer Width, Solid Carbide
• Hand Cleaner: 1 L Bottle Liquid, Red & Orange, Floral Scent
• Single Profile Thread Mill: 3/8-16 to 3/8-40, 16 to 40 TPI, Internal & External, 4 Flutes, Solid Carbide 0.3″ Cut Dia, 3/8″ Shank Dia, 3″ OAL, AlTiN Coated
• Combination Chamfer & Countersink Drills; Maximum Drill Diameter (Decimal Inch): 0.4685 in; Maximum Drill Diameter (mm): 0.4685 in; Minimum Drill Diameter (mm): 0.4528 in; Shank Type: Weldon Flat; Body Shank Diameter (mm): 0.6250 in; Chuck Shank Diameter
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.172″ ID, 0.473″ OD, 0.035″ Thick
• Alkaline Drain Opener Alkaline Drain Opener
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 3.0920 in; Maximum Cutting Diameter: 4.0000 in; Maximum Depth Of Cut: 0.2500 in; Arbor Hole Diameter (mm): 1.50; Compatible Insert Size Code: 1605; Maximum Ramping Angle: 1.2 ™; Series: 5G6Q; Cutt
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 3.1440 in; Maximum Cutting Diameter: 4.0000 in; Maximum Depth Of Cut: 0.1060 in; Arbor Hole Diameter (mm): 1.50; Compatible Insert Size Code: 1605; Maximum Ramping Angle: 1.6 ™; Series: 5G6Q; Cutt
• Hand Sanitizer: Gel, 1.2 L, Dispenser Refill
• Replaceable Tip Drill: 0.984 to 1.02'' Drill Dia, 5.134″ Max Depth, 1.25'' Flatted Shank Uses H3P Inserts, 9.32″ OAL, Through Coolant
• Combination Chamfer & Countersink Drills; Maximum Drill Diameter (Decimal Inch): 12.40 mm; Maximum Drill Diameter (mm): 12.40 mm; Minimum Drill Diameter (mm): 12.00 mm; Shank Type: Weldon Flat; Body Shank Diameter (mm): 16.00 mm; Chuck Shank Diameter (mm)
• Replaceable Tip Drill: 25 to 25.9 mm Drill Dia, 130.31 mm Max Depth, 32 mm Flatted Shank Uses H3P Inserts, 236.61 mm OAL, Through Coolant
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 82.6 mm; Housing Material: Stainless Steel; Lock Type: Set Screw; Static Load Capacity: 2800.00; Number Of Bolts: 2; Maximum RPM: 4300.000; Series: UCPAS
• Hatchets & Axes; Type: Axe; Overall Length Range: 24″ and Longer; Head Weight Range: 1 - 2.9 lbs.; Handle Material: Hickory; Blade Length (Inch): 3-15/16; Head Weight (Grams): 1250; Overall Length (mm): 717.0000; Additional Information: Subrand: SPALT-FIX
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.17″ ID, 0.311″ OD, 0.054″ Thick
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 82.6 mm; Housing Material: Stainless Steel; Lock Type: Set Screw; Static Load Capacity: 2800.00; Number Of Bolts: 2; Maximum RPM: 4300.000; Series: UCPAS
• Indexable High-Feed End Mill: 0.394″ Cut Dia, 0.38″ Modular Shank Uses 2 UNLU Inserts, 0.02″ Max Depth, 0.67″ OAL, Through Coolant
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Weldon Flat Shank Uses 3 UNLU Inserts, 0.06″ Max Depth, 7-3/4″ OAL, Through Coolant
• Manual Ball Valve: 2″ Pipe, Full Port
• Miniature Turret Tool Holder: 1.5354″ Projection
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 1/4″ OD, 0.026″ Thick
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 24; Cutting Width (Decimal Inch): 24; Cutting Width (Inch): 24
• Indexable High-Feed End Mill: 10 mm Cut Dia, 0.38 mm Modular Shank Uses 2 UNLU Inserts, 0.5 mm Max Depth, 17 mm OAL, Through Coolant
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 30; Cutting Width (Decimal Inch): 30; Cutting Width (Inch): 30
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.282″ OD, 0.021″ Thick
• V-Belt: Section 5VX Ethylene Compound, Banded, 2/3VX530
• End Mill Holder: CAT50 Taper Shank, 5/8″ Hole 7-1/2″ Projection, 1-1/2″ Nose Dia, Through Coolant
• Indexable Concave Radius Cutters; Cutter Diameter (Inch): 1.0000; Maximum Depth Of Cut: 1.9000 in; Minimum Cutting Radius (Decimal Inch): 0.1870 in; Maximum Cutting Radius (Decimal Inch): 0.2500 in; Insert Cutting Radius (Decimal Inch): 0.1250 in; Shank D
• Collet Chuck: ER Collet, Taper Shank 80 mm Projection, Through Coolant
• Chemical Resistant Gloves: 2X-Large, 12″ Thick, Viton-Coated, Butyl, Unsupported Black, 12'' OAL, Smooth, ANSI Cut A1, ANSI Abrasion 1, ANSI Puncture 0
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.438″ OD, 0.035″ Thick
• Chemical Resistant Gloves: Small, 12″ Thick, Viton & Butyl-Coated, Viton & Butyl, Unsupported Black, 12'' OAL, Smooth, ANSI Cut A1, ANSI Abrasion 1, ANSI Puncture 0
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Acrylic Adhesive Backing
• Chemical Resistant Gloves: Medium, 12″ Thick, Viton & Butyl-Coated, Viton & Butyl, Unsupported Black, 12'' OAL, Smooth, ANSI Cut A1, ANSI Abrasion 1, ANSI Puncture 0
• Combination Chamfer & Countersink Drills; Maximum Drill Diameter (Decimal Inch): 0.4291 in; Maximum Drill Diameter (mm): 0.4291 in; Minimum Drill Diameter (mm): 0.4134 in; Shank Type: Weldon Flat; Body Shank Diameter (mm): 0.6250 in; Chuck Shank Diameter
• Milling Chucks; Taper Size: BT40; Shank Type: Taper; Hole Diameter (Inch): 1.2598; Nose Diameter: 70.00 mm; Projection: 108.00 mm; Through Coolant: Normal Pressure; Clamping Depth: 83.00 mm; Tir: 0.0001 in; Coolant Type: Through-Bore; Hole Diameter (Decim
• Chemical Resistant Gloves: X-Large, 12″ Thick, Viton-Coated, Butyl, Unsupported Black, 12'' OAL, Smooth, ANSI Cut A1, ANSI Abrasion 1, ANSI Puncture 0
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 0.498″ OD, 0.031″ Thick
• Chemical Resistant Gloves: Large, 12″ Thick, Viton & Butyl-Coated, Viton & Butyl, Unsupported Black, 12'' OAL, Smooth, ANSI Cut A1, ANSI Abrasion 1, ANSI Puncture 0
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.2520 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.0650 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1205; Maximum Ramping Angle: 0.7 ™; Series: DD6H; Cutt
• Bluetooth Speaker & Radio & Cordless, LCD
• Lathe Chuck Accessories; Accessory Type: Wiper; Product Compatibility: HC-63 Chuck; Number Of Pieces: 2
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.168″ ID, 0.509″ OD, 0.029″ Thick
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 35.0000; Material: 4340 Steel; Finish: Heat Treated; Head Diameter (Decimal Inch): 2.2500; Shank Length (Decimal Inch): 2.72 in; Finish/Coating: Heat Treated; Material: 4340 S
• Hand Cleaner: 1 L Bottle Liquid, Green, Pleasant Scent
• Laser Levels; Level Type: Rotary Laser; Laser Class: Class II; Laser Projection Orientation: Vertical, Horizontal; Plumb Type: Up; Accuracy: 1/16 in at 100 ft; Power Source: Battery; Batteries Included: Yes; Battery Chemistry: Lithium
• Lathe Chuck Accessories; Accessory Type: Wiper; Product Compatibility: HC-50 Chuck; Number Of Pieces: 2
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 0.559″ OD, 0.027″ Thick
• Diamond Pattern Router Bit: 1.5″ LOC, 1/2″ Shank Dia, Drill Point 3″ OAL, Solid Carbide, Bright/Uncoated
• Indexable Grooving Toolholder: STWL2525M15, External Left Hand, No
• Miniature Turret Tool Holder: 2.7559″ Projection, Through Coolant
• Miniature Turret Tool Holder: 2.7559″ Projection
• Corner Chamfer End Mill: 6.00 mm Dia, 8.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.313″ OD, 0.026″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.126″ ID, 0.437″ OD, 0.026″ Thick
• Drill Cartridges; Series: BTA; Cartridge Location: Outer; Number of Inserts Used in Cartridge: 1; Compatible Insert Size Code: 1403; Insert Style (Finishing Insert): NPMX; Compatible Insert Style: NPMX; Number Of Inserts: 1; Cartridge Mounting Location: O
• Open Cell Neoprene Foam: 36″ Wide, 48″ Long, Black Adhesive Backing
• Drill Cartridges; Series: BTA; Cartridge Location: Peripheral; Number of Inserts Used in Cartridge: 1; Compatible Insert Size Code: 0803; Insert Style (Finishing Insert): NPMX; Compatible Insert Style: NPMX; Number Of Inserts: 1; Cartridge Mounting Locati
• Indexable Concave Radius Cutters; Cutter Diameter (Inch): 1.0000; Maximum Depth Of Cut: 1.9000 in; Minimum Cutting Radius (Decimal Inch): 0.0310 in; Maximum Cutting Radius (Decimal Inch): 0.1250 in; Insert Cutting Radius (Decimal Inch): 0.1250 in; Shank D
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 40, Plain Backing
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.343″ OD, 0.035″ Thick
• Drill Cartridges; Series: BTA; Cartridge Location: Inner; Number of Inserts Used in Cartridge: 1; Compatible Insert Size Code: 0803; Insert Style (Finishing Insert): NPMX; Compatible Insert Style: NPMX; Number Of Inserts: 1; Cartridge Mounting Location: I
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses CC.. Inserts, Through Coolant
• Helical Flute Thread Mill: 7/16-20, Internal, 6 Flute, 3/8″ Shank Dia, Solid Carbide 20 TPI, 0.3759″ Cut Dia, 0.956″ LOC, 4.016″ OAL, TiAlN-T46 Coated
• Drill Cartridges; Series: BTA; Cartridge Location: Inner; Number of Inserts Used in Cartridge: 1; Compatible Insert Size Code: 1403; Insert Style (Finishing Insert): NPMX; Compatible Insert Style: NPMX; Number Of Inserts: 1; Cartridge Mounting Location: I
• Indexable Plunge End Mills; Maximum Cutting Diameter: 1.5000 in; Shank Type: Modular; Maximum Depth Of Cut: 0.4700 in; Modular Connection Size: M16; Toolholder Style: QHU; Compatible Insert Style: SD.S; Compatible Insert Size Code: 1305; Series: QHU; Numb
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.369″ OD, 0.035″ Thick
• Drill Cartridges; Series: BTA; Cartridge Location: Inner; Number of Inserts Used in Cartridge: 1; Compatible Insert Size Code: 1704; Insert Style (Finishing Insert): NPMX; Compatible Insert Style: NPMX; Number Of Inserts: 1; Cartridge Mounting Location: I
• Indexable Grooving Toolholder: X41.00LH.031, 0.2560″ Max Depth, Uses X42503 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Milling Cartridges & Cassettes; Compatible Insert Style: RP..16..; Series: 335.25; Insert Inscribed Circle (mm): 16.00; Toolholder Style: 335.25; Type: Cartridge; Indexable Mill Compatibility: Slotting Mill; Toolholder Style: 335.25; Product Type: Cartrid
• Parking Lot & Roadway Lights; Fixture Type: Parking Lot Light; Lamp Type: LED; Lens Material: Glass; Lamp Base Type: Integrated LED; Mounting Type: Pole Mount; Voltage: 120/277 V; Wattage: 190
• Milling Tip Inserts; Milling Tip Type: Corner Rounding; Tool Material: Carbide; Manufacturer Grade: Submicron; Insert Hand: Right Hand; Chipbreaker: No; Series: Haimer Mill; Number Of Flutes: 4
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.465″ OD, 0.024″ Thick
• Milling Cartridges & Cassettes; Compatible Insert Style: RP..16..; Series: 335.25; Insert Inscribed Circle (mm): 16.00; Toolholder Style: 335.25; Type: Cartridge; Indexable Mill Compatibility: Slotting Mill; Toolholder Style: 335.25; Product Type: Cartrid
• Milling Cartridges & Cassettes; Compatible Insert Style: RP..16..; Series: 335.25; Insert Inscribed Circle (mm): 16.00; Toolholder Style: 335.25; Type: Cartridge; Indexable Mill Compatibility: Slotting Mill; Toolholder Style: 335.25; Product Type: Cartrid
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 66 mm OD, 50 mm Stroke, M42 x 1.5 Thread 212.5 mm OAL, 83.3 lb Force
• Indexable Grooving Toolholder: TTER25.4-8-TB, 0.1180″ Max Groove Width 0.7870″ Max Depth, Uses TD 8 & TS 8 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Neutral Uses RC.. Inserts, Through Coolant
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.097″ ID, 0.249″ OD, 0.012″ Thick
• Black Tee: 3 x 3 x 2″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: TDJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses CC.. Inserts, Through Coolant
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: SN..33.; Toolholder Style: HSBNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Widt
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.439″ OD, 0.045″ Thick
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses DC.. Inserts, Through Coolant
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDQNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 108.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 63.546 mm; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• Flood Control Wall Mount Dispenser
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses TC.. Inserts, Through Coolant
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 63.546 mm; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatib
• Corner Chamfer End Mill: 6.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
• 10 Pc Indoor Grab & Go Flood Control Kit
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 1/2″ OD, 0.021″ Thick
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses TC.. Inserts, Through Coolant
• 5/8″ Screw 2″ OAL 5/8″ ID x 1″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: SN..43.; Toolholder Style: TSSNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 45.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses DC.. Inserts, Through Coolant
• 1/2″ Screw 1-1/2″ OAL 0.505″ ID x 1″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: SNG43.; Toolholder Style: TSSNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 45.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.441″ OD, 0.066″ Thick
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses CC.. Inserts, Through Coolant
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Narrow Inner Ring; Bolt Hole (Center-to-center): 71.5 mm; Housing Material: Thermoplastic; Lock Type: Set Screw; Static Load Capacity: 1225.00; Number Of Bolts: 2; Maximum RPM: 6490.000; Series: SBLFP
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: SN..43.; Toolholder Style: TSKNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• #8 Screw 2″ OAL 0.166″ ID x 1/4″ OD Round Stainless Steel Circuit Board Spacers Passivated, Grade 316, Female Unthreaded
• Taper Shank Drill Bit: 0.7972″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 7.2441″ Flute Length, 11.1024″ OAL, Cone Relief Point, Spiral Flute
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses TC.. Inserts, Through Coolant
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.141″ ID, 0.496″ OD, 0.016″ Thick
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: SNG43.; Toolholder Style: TSKNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0630; Drill Diameter (mm): 27.00; Maximum Drill Depth (mm): 135.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Metering Pump Accessories; Type: Seal Kit; For Use With: CRP1000V400CRTG; Length (Decimal Inch): 7.0000; For Use With: CRP1000V400CRTG
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Neutral Uses RC.. Inserts, Through Coolant
• Indexable Drill Insert: TPA17, IN2505, Carbide Coated
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0433; Drill Diameter (mm): 26.50; Maximum Drill Depth (mm): 135.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses CC.. Inserts, Through Coolant
• Metering Pump Accessories; Type: Repair Kit; For Use With: CP500V225CRTG; Length (Decimal Inch): 7.0000; For Use With: CP500V225CRTG
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.264″ OD, 0.027″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0827; Drill Diameter (mm): 27.50; Maximum Drill Depth (mm): 140.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: DC..21.5.; Toolholder Style: SDNCN; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 63.0; Insert Holding Method: Screw; Shank Width (mm): 10.00; Sha
• Indexable Grooving Toolholder: TTEL25.4-8-TB, 0.2360″ Max Groove Width 0.7870″ Max Depth, Uses TD 8 & TS 8 Inserts, 1.0000″ Shank Height, 1″ Shank Width, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1024; Drill Diameter (mm): 28.00; Maximum Drill Depth (mm): 140.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Corner Chamfer End Mill: 8.00 mm Dia, 11.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.163″ ID, 0.265″ OD, 0.011″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1417; Drill Diameter (mm): 29.00; Maximum Drill Depth (mm): 145.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Drywall & Hollow Wall Anchors; Thread Size (Inch): 1/4-20; Overall Length: 5 in; Anchor Material: Steel; Minimum Workpiece Thickness: 0.625 in; Maximum Load Capacity: 235.0 lb; Finish: Zinc Plated
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: DC..32.5.; Toolholder Style: SDNCN; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 63.0; Insert Holding Method: Screw; Shank Width (mm): 10.00; Sha
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1811; Drill Diameter (mm): 30.00; Maximum Drill Depth (mm): 150.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Tire Chains; For Use With: 275/70R16; 285/70R16; 255/80R17; 265/55R17; 235/80R18; 285/70R15; 32x11.5R16.5; 235/80R17; 275/80R17; 31x11.5R16; 285/60R16; 285/60R18; 275/60R17; 285/60R17; 10R17.5; 255/65R18.5; 31/11.5R15; 33x10.5R16.5; 11R15; 255/75R15; 225/
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.406″ OD, 0.042″ Thick
• Corner Chamfer End Mill: 8.00 mm Dia, 22.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1614; Drill Diameter (mm): 29.50; Maximum Drill Depth (mm): 150.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Tire Chains; For Use With: 275/70R16; 285/70R16; 255/80R17; 265/55R17; 235/80R18; 285/70R15; 32x11.5R16.5; 235/80R17; 275/80R17; 31x11.5R16; 285/60R16; 285/60R18; 275/60R17; 285/60R17; 10R17.5; 255/65R18.5; 31/11.5R15; 33x10.5R16.5; 11R15; 255/75R15; 225/
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: TN..33.; Toolholder Style: TTFNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 91.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• All-Purpose Cleaner: 18 gal Can Liquid & Aerosol, Citrus Scent
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.586″ OD, 0.054″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1220; Drill Diameter (mm): 28.50; Maximum Drill Depth (mm): 145.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..64.; Toolholder Style: TCLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• All-Purpose Cleaner: 5 gal Pail Liquid, Sweet Scent
• Guhring GH222.0500.500.00.03.L.00.34 External Left Hand Cut-Off Insert Holder 0.5000″ Square Shank
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 168 mm OAL, 33.2 lb Force
• Corner Chamfer End Mill: 10.00 mm Dia, 13.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 168 mm OAL, 33.2 lb Force
• Guhring GH222.1212.125.00.03.R.00.34 External Right Hand CUT-OFF INSERT HOLDER 12.00mm Square Shank
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.242″ OD, 0.016″ Thick
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: SN..43.; Toolholder Style: TSRNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 75.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Guhring GH222.1212.125.00.03.L.00.34 External Left Hand CUT-OFF INSERT HOLDER 12.00mm Square Shank
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: DN..43.; Toolholder Style: TDNNN; Rake: Negative; Multi-use Tool: No; Lead Angle: 63.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width (
• Traffic Barricades; Type: A-Frame; Barricade Height (Inch): 40; Material: Plastic; Barricade Width (Inch): 29; Reflective: Yes; Compliance: None; Color: White; Weight (Lb.): 6.0000; Top Panel Height (Inch): 8; Top Panel Width (Inch): 120; Bottom Panel Hei
• Guhring GH222.0500.500.00.03.R.00.34 External Right Hand Cut-Off Insert Holder 0.5000″ Square Shank
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Mushroom Head; Pushbutton Shape: Round; Pushbutton Color: Red; Operator Illumination: NonIlluminated; Operation Type: Pneumatic; Amperage (mA): 10; Voltage: 125; Contact Form: DPST; Standards
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.41″ OD, 0.042″ Thick
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: TN..33.; Toolholder Style: TTJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Roll: Neoprene Rubber, 48″ Wide, Black Durometer 60, Plain Backing
• Quick-Change Adapters; Quick Change System: Quick Change System Blitz SBK; Inside Taper Size: ER40; Through Coolant: No; Nose Diameter (mm): 63.00; Projection (mm): 70
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: HCLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 1.0000; Shank Widt
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.241″ OD, 0.016″ Thick
• Modular Reamer Heads; Model Number Compatibility: KST250; Head Diameter (Inch): 1-5/8; Reamer Finish/Coating: Uncoated; Flute Type: Straight; Head Length (Decimal Inch): 0.7087; Cutting Direction: Straight; Material Application: Non-Ferrous Materials; Hea
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2454MC
• Corner Chamfer End Mill: 10.00 mm Dia, 25.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Level Accessories; Type: Receiver; For Use With: Rotary Laser For Leveling, Grading, And Aligning Applications; Material: Plastic; Color: Red, Black; Overall Height: 1.3 in; Length (Inch): 7.11 in