Products

• Drill Heads; Series: V46; Head Connection Size: 0.984; Pilot Type: Pilot Drill; Maximum Drill Diameter (Decimal Inch): 1.2500; Pilot Drill Diameter (Decimal Inch): 0.2362; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (Decimal Inch):
• Bug Max Insect Killer
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.9680; Drill Diameter (Inch): 31/32; Maximum Drill Depth (Decimal Inch): 2.9530; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0
• Helical Flute Thread Mill: 1/2, UNC, 4 Flute, Solid Carbide 13 TPI, TiSiN Coated
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.373″ OD, 0.026″ Thick
• Manual Ball Valve: 1-1/4″ Pipe, Full Port, Stainless Steel 2-Piece, FNPT, 1,000 psi WOG
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.0000; Drill Diameter (Inch): 1; Maximum Drill Depth (Decimal Inch): 3.0710; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.000
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.0310; Drill Diameter (Inch): 1-1/32; Maximum Drill Depth (Decimal Inch): 3.1890; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 80, Plain Backing
• Indexable Boring Bar: S12MSTLPL0916A, 16.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses TPGT1815 ™, TPMT1815 ™, TPMX1815 ™, TPEH1815 ™, TPGH1815 ™, TPGB1815 ™ & TPMH1815 ™ Inserts
• Indexable Boring Bar: S12MSTLPR0916A, 16.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses TPGT1815 ™, TPMT1815 ™, TPMX1815 ™, TPEH1815 ™, TPGH1815 ™, TPGB1815 ™ & TPMH1815 ™ Inserts
• Taper Shank Drill Bit: 0.6563″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 9.0551″ Flute Length, 13.9764″ OAL, Cone Relief Point, Spiral Flute
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.4″ OD, 0.012″ Thick
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.8750; Drill Diameter (Inch): 7/8; Maximum Drill Depth (Decimal Inch): 2.7170; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7
• Indexable Boring Bar: S12MSCLPL0814A, 14.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses CPMT2515 ™, CPMH2515 ™, CPMB2515 ™ & CPGB2515 ™ Inserts
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.9370; Drill Diameter (Inch): 15/16; Maximum Drill Depth (Decimal Inch): 2.8350; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0
• 0.394″ Max Depth, 0.079 to 0.787″ Width, External Left Hand Indexable Grooving/Cutoff Toolholder 4.331″ OAL, Uses SA 16-20\x85 Inserts, HSA Monoblock Toolholder, Series SA Parting / Grooving
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.316″ OD, 0.035″ Thick
• Indexable Boring Bar: S12MSCLPL0916A, 16.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses CPMT32 ™, CPMH32 ™, CPMB32 ™ & CPGB32 ™ Inserts
• Indexable Square-Shoulder Face Mill: HTF D2.5061.00RLN10, 2-1/2'' Cut Dia, 1.0000″ Arbor Hole Dia, 0.0120″ Max Cutting Depth Uses 6, HTP LN Inserts, No, Series HTF
• Hard Hat: High Visibility & Heat Protection, Front Brim, Class G, 4-Point Suspension Gold, Plastic
• Indexable Boring Bar: S10LSTLCR0912A, 12.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses TCMX1815 ™ & TCMT1815 ™ Inserts
• Indexable Grooving Toolholder: TTEL31.8-6, 0.1970″ Max Groove Width 0.7870″ Max Depth, Uses TD 6 & TS 6 Inserts, 1.2500″ Shank Height, 1-1/4″ Shank Width, No
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.313″ OD, 0.035″ Thick
• Lathe Chuck Accessories; Accessory Type: Plunger Nut; Product Compatibility: HST-08 Chuck; Number Of Pieces: 1
• Drill Heads; Series: V46; Head Connection Size: 0.984; Pilot Type: Pilot Drill; Maximum Drill Diameter (Decimal Inch): 1.1250; Pilot Drill Diameter (Decimal Inch): 0.2362; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (Decimal Inch):
• Indexable Boring Bar: S12MSTLCL1114A, 14.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses TCMX215 ™ & TCMT215 ™ Inserts
• Lathe Chuck Accessories; Accessory Type: Plunger Nut; Product Compatibility: HS-06 Chuck; Number Of Pieces: 1
• Indexable Boring Bar: S10LSTLCR1112A, 12.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses TCMX215 ™ & TCMT215 ™ Inserts
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.152″ ID, 0.335″ OD, 0.021″ Thick
• Indexable Boring Bar: A12S-SDUNL-3, 93.00&deg N/A Steel 10.0000″ OAL, Screw,
• Hydraulic Tool Chuck: Taper Shank 39.25 mm Nose Dia, Through Coolant
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 90, Plain Backing
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Indexable Boring Bar: S10LSTLCL0912A, 12.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses TCMX1815 ™ & TCMT1815 ™ Inserts
• 1″ Screw Standard Flat Washer: Steel, Uncoated 0.085″ ID, 0.313″ OD, 0.016″ Thick
• Indexable Boring Bar: S12MSTLCR1114A, 14.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses TCMX215 ™ & TCMT215 ™ Inserts
• Indexable Boring Bar: S10LSTLPL1112A, 12.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses TPMX22 ™, TPMT22 ™, TPGH22 ™, TPET22 ™, TPGB22 ™ & TPMH22 ™ Inserts
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 0.377″ OD, 0.045″ Thick
• Indexable Boring Bar: S10LSTLPR1112A, 12.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses TPMX22 ™, TPMT22 ™, TPGH22 ™, TPET22 ™, TPGB22 ™ & TPMH22 ™ Inserts
• Collet Chuck: 0.079 to 0.276″ Capacity, ER Collet, Dual Contact Taper Shank 2.5″ Projection, Through Coolant
• Lathe Chuck Accessories; Accessory Type: Plunger Nut; Product Compatibility: HS-05-47 Chuck; Number Of Pieces: 1
• Indexable Boring Bar: S10LSTLPR0912A, 12.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses TPGT1815 ™, TPMT1815 ™, TPMX1815 ™, TPEH1815 ™, TPGH1815 ™, TPGB1815 ™ & TPMH1815 ™ Inserts
• Anit-Bacterial Wipes: Canister, 6.75 x 6″ Sheet, White
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.09″ ID, 1/4″ OD, 0.016″ Thick
• Hydraulic Tool Chuck: Taper Shank, 20 mm Hole 64.5 mm Projection, 39.25 mm Nose Dia, Through Coolant
• Indexable Boring Bar: S12MSTLPL1114A, 14.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses TPMX22 ™, TPMT22 ™, TPGH22 ™, TPET22 ™, TPGB22 ™ & TPMH22 ™ Inserts
• Helical Flute Thread Mill: 7/16-14, Internal, 4 Flute, Solid Carbide 14 TPI, 0.3268″ Cut Dia, TiSiN Coated
• Plastic Sheet: Acetal, 1/4″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.156″ ID, 0.304″ OD, 0.027″ Thick
• Helical Flute Thread Mill: 1/2-20, Internal, 4 Flute, Solid Carbide 20 TPI, 0.3819″ Cut Dia, TiSiN Coated
• Quick-Change Disc: Type S, 3" Dia, 80 Grit, Zirconia Alumina, Coated
• Plastic Sheet: Garolite, 3/8″ Thick, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Helical Flute Thread Mill: 7/16-20, Internal, 4 Flute, Solid Carbide 20 TPI, 0.3268″ Cut Dia, TiSiN Coated
• Toner Cartridge: Yellow Use with HP Color Laserjet Pro M254dw & MFP M281fdw
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 1/2″ OD, 0.042″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.627″ OD, 0.032″ Thick
• Hand Sanitizer: Gel, 800 mL, Cartridge Hand Sanitizer Gel
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 0.265″ OD, 0.028″ Thick
• Angular Contact Ball Bearing: 50 mm Bore Dia, 90 mm OD, 30.16 mm OAW, Without Flange 30 ° Contact Angle
• Plastic Sheet: Garolite, 1/16″ Thick, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Plastic Sheet: Acetal, 2″ Thick, Black Rockwell M-90
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 0.621″ OD, 0.044″ Thick
• 0.032 Inch Thick x 48 Inch Wide x 48 Inch Long, Aluminum Sheet Alloy 6061-T6
• Combination Drill & Reamers; Reamer Size (mm): 3; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.1181; Series: UDM5P2AB; Tool Performance: High Performance; Included Angle: 118.00; Flute
• Guhring GB108.1000.415.00.22.N.IK.90 1″ Shank 105.00mm OAL Round Shank Holder with Top Clamping Screw Used with 8mm Shank Tools
• Combination Drill & Reamers; Reamer Size (mm): 3; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.1181; Series: UDM5P2AC; Tool Performance: High Performance; Included Angle: 118.00; Flute
• Guhring GB108.1000.415.00.22.N.IK 1″ Shank 105.00mm OAL Round Shank Holder with Top Clamping Screw Used with 8mm Shank Tools
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.44″ OD, 0.041″ Thick
• Guhring GB110.1000.415.00.22.N.IK 1″ Shank 105.00mm OAL Round Shank Holder with Top Clamping Screw Used with 10mm Shank Special Tools up to 112mm Length
• Guhring GB110.1000.415.00.22.N.IK90 1″ Shank 105.00mm OAL Round Shank Holder Lateral Clamping Screw Used with 10mm Shank Special Tools up to 112mm Length
• Barrier Parts & Accessories; Type: Sign Stand; Color: Yellow; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: Yellow; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.095″ ID, 5/8″ OD, 0.035″ Thick
• Guhring GB108.0025.100.00.22.N.IK.VSP 25.00mm Shank 100.00mm OAL Round Shank Holder with Top Clamping Screw, Four Clamping Surfaces Used with 8mm Shank Tools
• Barrier Parts & Accessories; Type: Sign Stand; Color: White; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: White; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/Wh
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.44″ OD, 0.045″ Thick
• Barrier Parts & Accessories; Type: Sign Stand; Color: Orange; Height (Decimal Inch): 45.000000; Base Material: Polyethylene; Length (Inch): 3; Width (Inch): 13; Finish/Coating: Orange; For Use With: Indoor & Outdoor; Material: Plastic; Tape Color: Orange/
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.401″ OD, 0.032″ Thick
• Safe2Dose Oxy Non-Acid Bathroom Cleaner Green Seal ™ Certified Bathroom Cleaner
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 1/2″ OD, 0.026″ Thick
• Replaceable Tip Drill: 23 to 23.9 mm Drill Dia, 276 mm Max Depth, 32 mm Straight-Cylindrical Shank Uses DMP Inserts, 372.13 mm OAL, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.156″ ID, 0.345″ OD, 0.043″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.4409; Drill Diameter (mm): 62.00; Maximum Drill Depth (mm): 124.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.4016; Drill Diameter (mm): 61.00; Maximum Drill Depth (mm): 122.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 0.687″ OD, 0.021″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.3622; Drill Diameter (mm): 60.00; Maximum Drill Depth (mm): 120.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 1/4″ OD, 0.016″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.4803; Drill Diameter (mm): 63.00; Maximum Drill Depth (mm): 126.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Roll: EPDM Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.2441; Drill Diameter (mm): 57.00; Maximum Drill Depth (mm): 114.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.171″ ID, 0.44″ OD, 0.035″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.2047; Drill Diameter (mm): 56.00; Maximum Drill Depth (mm): 112.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Abrasive Belt: 6" Wide, 330" OAL, 100 Grit, Aluminum Oxide
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.3228; Drill Diameter (mm): 59.00; Maximum Drill Depth (mm): 118.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.185″ ID, 0.312″ OD, 0.037″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 2.2835; Drill Diameter (mm): 58.00; Maximum Drill Depth (mm): 116.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 2.0000 to 3.0000; Cuttin
• Collet Chuck: 0.079 to 0.276″ Capacity, ER Collet, Dual Contact Taper Shank 4″ Projection, Through Coolant
• Indexable Grooving Toolholder: SNGL08H06, Uses 6 Inserts, No
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.096″ ID, 1/4″ OD, 0.027″ Thick
• Collet Chuck: 0.039 to 0.394″ Capacity, ER Collet, Dual Contact Taper Shank 4″ Projection, Through Coolant
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 80.00; Maximum Cutting Diameter (mm): 80.60; Maximum Depth of Cut (mm): 9.50; Arbor Hole Diameter (mm): 25.40; Lead Angle: 88; Compatible Insert Size Code: SNMU120608HNEN-MM; Cutter Styl
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 5/8″ OD, 0.045″ Thick
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 3.2120 in; Maximum Cutting Diameter: 4.0000 in; Maximum Depth Of Cut: 0.0787 in; Arbor Hole Diameter (mm): 1.50; Compatible Insert Size Code: 1307; Maximum Ramping Angle: 0.3 ™; Series: DG6P; Cutt
• Indexable Insert Drills; Drill Style: MCTR; Maximum Drill Diameter (mm): 16.00; Maximum Drill Depth (mm): 257.20; Shank Type: Flatted; Shank Diameter (Inch): 25; Shank Diameter (mm): 25.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximu
• Welded Bandsaw Blade: 21' 7″ Long, 1/2″ Wide, 0.025″ Thick, 8 to 12 TPI Bi-Metal, Toothed Edge
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.166″ ID, 0.388″ OD, 0.021″ Thick
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Right Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Gasket Tapes; Thickness (Decimal Inch): 0.2760; Width (Inch): 1; Color: White; Material: Compressible ePTFE; Length (Feet): 25; Material Grade: Standard; PSC Code: 5330; Maximum Temperature (F): 500; Minimum Temperature (F): -450; Material: Compressible e
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Left Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.652″ OD, 0.028″ Thick
• Copy Paper: Use with Printer
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Right Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Left Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.313″ OD, 0.035″ Thick
• Tire Chains; For Use With: 395/85R20; 14R21; 14R20; 365/85R20; 13R24; 15.5/80R20; Axle Type: Single Axle
• Tire Chains; For Use With: 395/85R20; 14R21; 14R20; 365/85R20; 13R24; 15.5/80R20; Axle Type: Single Axle
• Flaring Tools & Tube Expanders; Type: Tube Expander; Maximum Pipe Capacity (Inch): 1-1/8; Minimum Pipe Capacity: 1-1/8; Cuts Material Type: Copper; Type: Tube Expander; Type: Tube Expander
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.163″ ID, 0.329″ OD, 0.021″ Thick
• Plastic Sheet: Polytetrafluoroethylene, 3/8″ Thick, White, 3,500 psi Tensile Strength Shore D-55
• Helical Flute Thread Mill: #1-11, Internal & External, 5 Flute, 5/8″ Shank Dia, Solid Carbide 11 TPI, 0.62″ Cut Dia, 1.546″ LOC, TiAlN Coated
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.172″ ID, 0.376″ OD, 0.021″ Thick
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Helical Flute Thread Mill: #1-11, Internal & External, 5 Flute, 5/8″ Shank Dia, Solid Carbide 11 TPI, 0.62″ Cut Dia, 1.546″ LOC, TiAlN Coated
• Sheet: Buna-N Rubber, 1″ Thick, 12″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Drill Heads; Series: V46; Head Connection Size: 44.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 48.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 25.00; Drill Head Style: V46; Th
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.309″ OD, 0.027″ Thick
• Drill Heads; Series: V46; Head Connection Size: 44.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 50.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 25.00; Drill Head Style: V46; Th
• Drill Heads; Series: V46; Head Connection Size: 44.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 52.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 25.00; Drill Head Style: V46; Th
• Abrasive Belt: 6" Wide, 330" OAL, 120 Grit, Aluminum Oxide
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.142″ ID, 0.748″ OD, 0.035″ Thick
• Drill Heads; Series: V46; Head Connection Size: 44.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 49.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 25.00; Drill Head Style: V46; Th
• Drill Heads; Series: V46; Head Connection Size: 44.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 46.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 25.00; Drill Head Style: V46; Th
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Standard Shank Uses 5 LOMU Inserts, 0.0984″ Max Depth, 6″ OAL, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.155″ ID, 0.429″ OD, 0.035″ Thick
• Drill Heads; Series: V46; Head Connection Size: 44.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 51.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 25.00; Drill Head Style: V46; Th
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 0.6693″ Modular Connection Shank Uses 5 LOMU Inserts, 0.0984″ Max Depth, 1.58″ OAL, Through Coolant
• Drill Heads; Series: V46; Head Connection Size: 44.5; Pilot Type: Pilot Drill; Maximum Drill Diameter (mm): 47.00; Pilot Drill Diameter (mm): 10.00; Number of Non-Pilot Inserts: 2; Pilot Drill Style: V95; Head Length (mm): 25.00; Drill Head Style: V46; Th
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.152″ ID, 0.392″ OD, 0.045″ Thick
• Roll: Neoprene Rubber, 1″ Thick, 12″ Wide, Black Durometer 70, Plain Backing
• Modular Fixturing Kits; Set Type: Bolt Kit; System Compatibility: 23433LC Lift Check Hoist Ring; Number of Pieces: 3; Includes: C-Clip; Replacement Bolt; Washer
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.179″ ID, 0.293″ OD, 0.026″ Thick
• Modular Fixturing Kits; Set Type: Bolt Kit; System Compatibility: 23433-08LC Lift Check Hoist Ring; Number of Pieces: 3; Includes: C-Clip; Replacement Bolt; Washer
• Welded Bandsaw Blade: 19' Long, 1-1/2″ Wide, 0.05″ Thick Cobalt, Honed & Toothed Edge, Variable Pitch
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 0.407″ OD, 0.035″ Thick
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.476″ OD, 0.035″ Thick
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Hand Pipe & Tube Cutter: 1/8 to 1-1/2″ Tube 9-3/4″ OAL, Cuts Copper
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Plastic Board; Galvanized High Carbon Steel Upright & Feet; Barricade Width (Inch): 96; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 19.0000; Top Panel Height (Inch
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.553″ OD, 0.073″ Thick
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.6890; Drill Diameter (mm): 17.50; Maximum Drill Depth (mm): 36.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.75
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Axial Clamp Straight Shank Modular Reamer Body 32mm Shank Diam, 2.362″ Shank Length, 277″ OAL, Right Hand Cut
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 0.315″ OD, 0.027″ Thick
• Plastic Sheet: Acetal, 1-3/4″ Thick, Black Rockwell M-90
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.248″ OD, 0.013″ Thick
• Brass Pipe Threaded Flange: 1/2″ Fitting, FNPT, Class 150, Lead Free 150 psi, Brass
• Abrasive Belt: 6" Wide, 318" OAL, 60 Grit, Aluminum Oxide
• Dispenser Classic White
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.28″ OD, 0.026″ Thick
• Roll: EPDM Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 60, Plain Backing
• Duct Hose: Thermoplastic Rubber, 3-1/2″ ID, 10 psi 50' Long, -60 to 275 ° F, Black & Yellow
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Modular Reamer Heads; Head Diameter (Inch): 27.0000; Head Diameter (mm): 27.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Helical; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Left Hand; Cutting Direction: Right Ha
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.094″ ID, 1/4″ OD, 0.028″ Thick
• Indexable Insert Drills; Drill Style: MCTR; Maximum Drill Diameter (mm): 15.00; Maximum Drill Depth (mm): 402.00; Shank Type: Flatted; Shank Diameter (Inch): 25; Shank Diameter (mm): 25.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximu
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.152″ ID, 0.592″ OD, 0.013″ Thick
• Plastic Bar: Acetal, 3/8″ Thick, Black Rockwell M-90
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Solid Carbide, AlCrN Finish Series TC470
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.152″ ID, 0.282″ OD, 0.026″ Thick
• 2 Head 20 Watt 120 V LED Floodlight Fixture Acrylic Lens, Wall Mount, White Aluminum Housing
• Tire Chains; For Use With: 315/75R22.5; 315/75R24; 320/75R24; 12R22.5; 315/75R24.5; 12.5R20; 12.5R22.5; 11R24.5; 295/75R24.5; 335/80R20; 355/80R20; 11R20; 11.5R20; 10R22; 285/75R24.5; 285/80R24.5; 305/75R24.5; Axle Type: Single Axle
• Tire Chains; For Use With: 315/75R22.5; 315/75R24; 320/75R24; 12R22.5; 315/75R24.5; 12.5R20; 12.5R22.5; 11R24.5; 295/75R24.5; 335/80R20; 355/80R20; 11R20; 11.5R20; 10R22; 285/75R24.5; 285/80R24.5; 305/75R24.5; Axle Type: Single Axle
• Threaded Rod Anchors; Mount Type: Vertical (End Drilled); For Material Type: Wood; Concrete; For Rod Size (Inch): 3/8; Material: Steel & Plastic; Overall Length: 2 in; Ultimate Pullout: 7190.0 lb; Standards: 2009 IBC;2009 IRC;2012 IBC;2012 IRC;2015 IBC;20
• 2 Head 20 Watt 120 V LED Floodlight Fixture Acrylic Lens, Wall Mount, White Aluminum Housing
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 1/4″ OD, 0.021″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2402; Drill Diameter (mm): 31.50; Maximum Drill Depth (mm): 128.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Modular Fixturing Kits; Set Type: Fixture Plate Machining Kit; System Compatibility: Ball Lock; Number of Pieces: 8; Includes: (4) Shanks; (4) Spacers; Shank Diameter Compatibility (mm): 20.00; Plate Thickness Compatibility (Decimal Inch): 0.7500
• 2 Head 20 Watt 120 V LED Floodlight Fixture Acrylic Lens, Wall Mount, White Aluminum Housing
• Hand Cleaner: 1,250 mL Dispenser Refill Foam, Light Amber, Fruity Scent
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.9252; Drill Diameter (mm): 23.50; Maximum Drill Depth (mm): 120.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• 2 Head 20 Watt 120 V LED Floodlight Fixture Acrylic Lens, Wall Mount, White Aluminum Housing
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 5/8″ OD, 0.054″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2795; Drill Diameter (mm): 32.50; Maximum Drill Depth (mm): 132.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Zep Aviation Exterior Aircraft Gel Aviation Exterior Aircraft Gel
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2598; Drill Diameter (mm): 32.00; Maximum Drill Depth (mm): 128.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.275″ OD, 0.027″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.9449; Drill Diameter (mm): 24.00; Maximum Drill Depth (mm): 120.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0236; Drill Diameter (mm): 26.00; Maximum Drill Depth (mm): 130.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.747″ OD, 0.042″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2992; Drill Diameter (mm): 33.00; Maximum Drill Depth (mm): 132.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Square-Shoulder End Mill: EVX16063RS, 42.0000'' Shank Dia, Straight Shank Uses 3, No, 240.00 mm OAL
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.9843; Drill Diameter (mm): 25.00; Maximum Drill Depth (mm): 125.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.189″ ID, 0.748″ OD, 0.037″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2008; Drill Diameter (mm): 30.50; Maximum Drill Depth (mm): 124.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0039; Drill Diameter (mm): 25.50; Maximum Drill Depth (mm): 130.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.9646; Drill Diameter (mm): 24.50; Maximum Drill Depth (mm): 125.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.277″ OD, 0.015″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2205; Drill Diameter (mm): 31.00; Maximum Drill Depth (mm): 124.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Tapcon next generation technology with star drive increases productivity by maintaining drive engagement during installation. Star drive eliminates bit slip for 3/16″ Star Flat Head Tapcon. Tapcon Concrete Anchors Blue Climaseal
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Collet Tool Holders; Collet Series: ER32; Overall Length: 2.55; Material: Steel
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.202″ ID, 0.606″ OD, 0.057″ Thick
• Collet Chuck: 2 to 20 mm Capacity, ER Collet, Taper Shank 60 mm Projection, 0.003 mm TIR, Balanced to 25,000 RPM, Through Coolant
• Zep-O-Zyme Waste System Treatment
• Inductive DRO Scale: 12″ Max Measuring Range, 0.00005, 0.0001, 0.0002 & 0.0005″ Resolution, 19.4″ Scale Length IP67, 3.5″ Cable Length
• Collet Chuck: Mini-ER Collet, Taper Shank 4″ Projection
• Manual Ball Valve: 2-1/2″ Pipe, Full Port
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.311″ OD, 0.021″ Thick
• Lathe Chuck Accessories; Accessory Type: Chip Cover; Product Compatibility: B205; Chuck Diameter Compatibility (Decimal Inch): 5.0000
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Taper Length Drill Bit: 0.8750″ Dia, 118 ° Bright/Uncoated, 7″ Flute Length
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 1/2″ OD, 0.045″ Thick
• Indexable Boring Bar: S40TPCLNL1250, 50.00 mm Min Bore, 40.00 mm Shank Dia, N/A Steel Lever Lock & Lock Pin, Uses CNMG43 ™, CNMM43 ™, CNGG43 ™, CNMA43 ™ & CNGA43 ™ Inserts
• Indexable Insert Drills; Drill Style: MCTR; Maximum Drill Diameter (mm): 12.00; Maximum Drill Depth (mm): 456.80; Shank Type: Flatted; Shank Diameter (Inch): 20; Shank Diameter (mm): 20.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximu
• Sheet: Neoprene Rubber, 36″ Wide, 56″ Long, Black Durometer 70, Acrylic Adhesive Backing
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.142″ ID, 0.363″ OD, 0.054″ Thick
• Cordless Nailers; Fastener Type: Cordless Brad Nailer; Nail Length (Inch): 5/8 - 2; Nail Diameter (Gauge): 18.00; Battery Included: No; Battery Series: 18V LXT; Battery Chemistry: Lithium-Ion
• Extra Length Drill Bit: 0.1969″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 6.654″ Flute Length, 7.874″ OAL, Straight-Cylindrical Shank, Series DC160-30-A1
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.298″ OD, 0.007″ Thick
• Extra Length Drill Bit: 0.189″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 6.654″ Flute Length, 7.874″ OAL, Straight-Cylindrical Shank, Series DC160-30-A1
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.437″ OD, 0.035″ Thick
• Extra Length Drill Bit: 0.1875″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 6.654″ Flute Length, 7.874″ OAL, Straight-Cylindrical Shank, Series DC160-30-A1
• Abrasive Belt: 6" Wide, 312" OAL, 60 Grit, Aluminum Oxide
• Extra Length Drill Bit: 0.1772″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 6.654″ Flute Length, 7.874″ OAL, Straight-Cylindrical Shank, Series DC160-30-A1
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.879″ OD, 0.054″ Thick
• Indexable Insert Drills; Drill Style: DRV; Maximum Drill Diameter (mm): 22.00; Drill Diameter (mm): 22.00; Maximum Drill Depth (mm): 44.00; Shank Type: Straight-Cylindrical; Shank Diameter (mm): 25.00; Number of Drill Inserts: 2; Cutting Direction: Right
• Kyocera S25DRV195M206, DRV Magic Drill 19.50mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.145″ ID, 0.379″ OD, 0.035″ Thick
• Kyocera S25DRV215M206, DRV Magic Drill 21.50mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Masking Tape: 12″ Wide, 60 yd Long, 9.8 mil Thick, White Crepe Paper, Rubber Adhesive, 50 lb/in Tensile Strength
• Kyocera S25DRV210M206, DRV Magic Drill 21.00mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Electrical Enclosure Accessories; For Use With: Enclosures; Includes: Mounting Hardware and Instructions; Standards Met: UL Recognized
• Kyocera S25DRV205M206, DRV Magic Drill 20.50mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.624″ OD, 0.026″ Thick
• 79 Watt, 7,000 Lumens, 5,000°K, 120-277V, LED Wall Pack Light Fixture Wall Mount, Prismatic Glass Lens, Aluminum Housing, Bronze (Color), Weather Resistant, 9-27/32″ D x 13-9/16″ H x 4-1/8″ W
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK255-SET; Series: PK255
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK256-SET; Series: PK256
• End Mill Holder: CAT50 Dual Contact Taper Shank, 7/16″ Hole 3″ Projection, 1.13″ Nose Dia
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.406″ OD, 0.053″ Thick
• Combination Drill & Reamers; Reamer Size (Inch): 3/8; Reamer Size (Fractional Inch): 3/8; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.3750; Series: UDM5A1AA; Tool Performance: High Per
• Sheet: Buna-N Rubber, 36″ Wide, 60″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Collet Tool Holders; Collet Series: ER32; Overall Length: 3.54; Material: Steel
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.142″ ID, 0.31″ OD, 0.007″ Thick