Products

• Extra Length Drill Bit: 0.328″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Die Drill Bit: 0.2559″ Dia, 140 °, Solid Carbide Bright Finish, 1-3/8″ Flute, 2-1/2″ OAL, Series 470
• Taper Shank Drill Bit: 0.6772″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 5.1181″ Flute Length, 8.9764″ OAL, N Point, Spiral Flute
• Spade Drill Insert: 0.9763″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Taper Shank Drill Bit: 0.6654″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 4.9213″ Flute Length, 8.7795″ OAL, Cone Relief Point, Spiral Flute
• OPHX0504ZZNA57 WHH15 Carbide Milling Insert TiAlN Finish, 0.1874″ Thick
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Acrylic Adhesive Backing
• Spade Drill Insert: 1.0039″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Taper Shank Drill Bit: 0.6811″ Dia, 2MT, 118 °, High Speed Steel Bright/Uncoated & Oxide, 5.1181″ Flute Length, 8.9764″ OAL, Cone Relief Point, Spiral Flute
• Ball Grip Quick-Release Pin: T-Handle, 3/8″ Pin Dia, 3″ Usable Length 4.45″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0666MC
• Spade Drill Insert: 1-1/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Taper Length Drill Bit: 0.3504″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Spade Drill Insert: 0.9803″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/4″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Boring Bar: 3 mm Min Bore, 10.5 mm Max Depth, Right Hand Cut, Carbide 2.50 mm Shank Dia, 35 mm OAL, 0.15 mm Corner Radius
• Spade Drill Insert: 1.0078″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Boring Bar: 3 mm Min Bore, 10.5 mm Max Depth, Right Hand Cut, Carbide 2.50 mm Shank Dia, 35 mm OAL, 0.15 mm Corner Radius
• Spade Drill Insert: 1.0354″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Pullers & Separators; Type: Heavy Duty Jaw Puller; Heavy-Duty Jaw Puller; Applications: Bearings; Wheels; Sprockets; Application: Rings; Maximum Spread (Decimal Inch): 5.2000; Maximum Spread (mm): 132.00; Minimum Spread (mm): 28.00; Minimum Spread (Decima
• Boring Bar: 3 mm Min Bore, 10.5 mm Max Depth, Right Hand Cut, Carbide 2.50 mm Shank Dia, 35 mm OAL, 0.08 mm Corner Radius
• Spade Drill Insert: 1.0629″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Pants & Chaps
• Blank Tag: Rectangle, Synthetic Paper, "Blank " White Medium –Weight Stock
• Pants & Chaps
• Boring Bar: 3 mm Min Bore, 10.5 mm Max Depth, Right Hand Cut, Carbide 2.50 mm Shank Dia, 35 mm OAL, 0.05 mm Corner Radius
• Spade Drill Insert: 1.0118″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Lumber; Thickness: 2; Width: 12; Length Ft.: 8; Wood Type: Southern Yellow Pine; Treated: KDHT
• Spade Drill Insert: 1.0669″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Electric Orbital Sanders; Sander Type: Random Orbital; Random Orbit: Yes; Random Orbital: Yes; Pad Shape: Round; Round Pad Size: 5 in; Amperage: 3.0000; Voltage: 120.00; Amperage: 3.0000; Backing Pad Type: Hook & Loop; Voltage: 120.00; Includes: CMEW231 R
• Spade Drill Insert: 1.0393″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Black Tee: 1/2″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Indexable Turning Cartridges; Series: CRSNX; Cutting Direction: Neutral; Toolholder Style Compatibility: CT10; Insert Style Compatibility: RN1204; Insert Holding Method: Clamp; Overall Length (mm): 17.00; Overall Width (Decimal Inch): 17.00; Overall Heigh
• Spade Drill Insert: 1.0149″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• M5x0.8 Coarse 40mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Spade Drill Insert: 1.0433″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 21 mm Dia, Series 1, Solid Carbide AM200 Finish, Series 1
• Spade Drill Insert: 1.0708″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Micro Drill Bit: 140 °, Solid Carbide AlTiN Nano Finish, RH Cut, Spiral Flute, Straight-Cylindrical Shank
• Spade Drill Insert: 1.046″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 24 mm Dia, Series 2, Solid Carbide AM200 Finish, Series 1
• Spade Drill Insert: 1-3/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 23 mm Dia, Series 1, Solid Carbide AM200 Finish, Series 1
• Traffic Cone & Barricade Accessories; Type: Base; Width (Decimal Inch): 18.5000; Height (Inch): 2.5; Material: Recycled Rubber; Weight (Lb.): 30.0000; For Use With: 12 in W x 18 in H or Smaller Sign Plasticade Power Post; Additional Information: Hole Shap
• Spade Drill Insert: 1.0196″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 19.5 mm Dia, Series 1, Solid Carbide AM200 Finish, Series 1
• Chucking Reamer: 0.323″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Spade Drill Insert: 1.0472″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 19 mm Dia, Series 1, Solid Carbide AM200 Finish, Series 1
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Spade Drill Insert: 1.0748″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 21.5 mm Dia, Series 1, Solid Carbide AM200 Finish, Series 1
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Hex Head Cap Screw: 7/16-14 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Combination Wrench: Vanadium Steel, Matte Satin Chrome-Plated
• Spade Drill Insert: 1.1023″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Air Cleaner & Filter Accessories; Type: Replacement HEPA Filter; Length (Inch): 24.6 in; Depth (Inch): 13 in; Width (Decimal Inch - 4 Decimals): 12.4000
• Ball Grip Quick-Release Pin: T-Handle, 9/16″ Pin Dia, 1-3/4″ Usable Length 3.35″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Screw Machine Length Drill Bit: 0.1285″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Spade Drill Insert: 9/16″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Indexable Square-Shoulder End Mill: EFP4050R, 32.0000'' Shank Dia, Straight Shank Uses 1, No, 120.00 mm OAL
• Spade Drill Insert: 1.0511″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Ball Grip Quick-Release Pin: T-Handle, 9/16″ Pin Dia, 1-1/4″ Usable Length 2.85″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Hard Hat: Class E, 4-Point Suspension Camouflage, Polyethylene, Vented, Slotted
• Spade Drill Insert: 0.5433″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1062″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Hard Hat: Impact Resistant, Slotted Cap, Type 1, Class E, 4-Point Suspension Brown, Polyethylene, Vented, Slotted
• Grooving Tool
• Spade Drill Insert: 1.0787″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Fall Protection Harnesses: 400 Lb, Vest Style, Size Standard, Polyester, Back & Hips Tongue Leg Strap, Friction Shoulder Strap, Quick-Connect Chest Strap, Shoulder Padding
• Spade Drill Insert: 0.5708″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Sheet: Neoprene Rubber, 1″ Thick, 6″ Wide, 6″ Long, Black Durometer 50, Plain Backing
• Spade Drill Insert: 1-7/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6003″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Overboot Ice Traction: Spikeless Traction, Pull-On Attachment, Size 9.5 to 11 Rubber, Ice, Unisex
• Spade Drill Insert: 1.0551″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 35/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Overboot Ice Traction: Spikeless Traction, Pull-On Attachment, Size 13.5 to 16 Rubber, Ice, Unisex
• Spade Drill Insert: 1.0826″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5984″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1102″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5393″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Sheet: Buna-N Rubber, 1″ Thick, 6″ Wide, 6″ Long, Black Durometer 50, Plain Backing
• Spade Drill Insert: 1.059″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Spade Drill Insert: 0.5669″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Weed Defeat Sprayer
• Spade Drill Insert: 1.0866″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Spade Drill Insert: 0.6062″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1417″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Spade Drill Insert: 1.1141″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Spade Drill Insert: 33/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1-1/16″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5748″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Spade Drill Insert: 1.0905″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Spade Drill Insert: 13/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1181″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 1.1456″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6299″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1-3/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Troffers; Lamp Type: LED; Troffer Size (Feet): 2x2; Number of Lamps: 1; Troffer Material: Aluminum; Diffuser Material: Acrylic; Wattage: 39; Voltage: 120-277 V; Diffuser Color: White; Ballast Type: Electronic; PSC Code: 6210
• Spade Drill Insert: 0.6023″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Corner Radius End Mill: 0.1181″ Dia, 0.315″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Spade Drill Insert: 1.1811″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• #4-40, 1.562″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-3/8″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 316, Passivated
• Spade Drill Insert: 0.633″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Corner Radius End Mill: 0.2362″ Dia, 0.6299″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Spade Drill Insert: 1.122″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6141″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Corner Radius End Mill: 0.2362″ Dia, 0.6299″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Spade Drill Insert: 1.1496″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5866″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Stitched Job Ticket Holders, 9″ x 12″, Neon Blue, 15/Case
• Spade Drill Insert: 1-1/8″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 1-3/16″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Stitched Job Ticket Holders, 9″ x 12″, Neon Yellow, 15/Case
• Spade Drill Insert: 0.6692″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Square End Mill: 1/8'' Dia, 0.1'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, RH Cut, RH Flute
• Spade Drill Insert: 1.0984″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Plastic Sheet: Garolite, 1/2″ Thick, Brown, 10,000 psi Tensile Strength Rockwell M-100
• Anchors, Grips & Straps; Material: Coated Steel; Temporary or Permanent: Permanent; Sling Connection Type: D-Ring; Material: Coated Steel; Connection Type: D-Ring; Temporary/Permanent: Permanent; Capacity (Lb.): 420
• Spade Drill Insert: 1.185″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 43/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1535″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Spade Drill Insert: 0.6102″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1-5/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Straight Router Bits; Cutting Diameter (Decimal Inch): 0.2362; Cutting Diameter (Inch): 0.2362; Cutting Diameter (mm): 6.00; End Type: Square End; Number of Flutes: 2; Length of Cut (mm): 18.0000; Length of Cut (Decimal Inch): 0.7087; Length of Cut (Inch)
• Profile Boring Bar: 5.7 mm Min Bore, 12 mm Max Depth, Right Hand Cut, Fine Grain Solid Carbide 6 mm Shank Dia, 37 mm OAL, 0.2 mm Corner Radius
• Spade Drill Insert: 0.5826″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1889″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 80, Plain Backing
• Spade Drill Insert: 41/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1574″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spiral Flute Pipe Taps; Thread Size (Inch): 1/8-27; Overall Length (Decimal Inch): 4.0000; Overall Length (Inch): 4; Thread Standard: NPT; Flute Direction: Right Hand; Helix Angle: 40; Material: High Speed Steel; Thread Length (Decimal Inch): 0.7520; Shan
• Spade Drill Insert: 0.6377″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1299″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• White Double-Sided Foam Tape: 1/2″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Indexable Boring Bar: QI-RAGF04C12-25, N/A Clamp, Uses QI-NF-0246-0002-GF Inserts
• Spade Drill Insert: 0.6771″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Hydraulic Hose Adapter: 1/2 to 1/4″, 1/4-1/2, 0 to 10,000 psi Steel, NPT, Threaded
• Spade Drill Insert: 1.1929″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Indexable Boring Bar: QI-RAGE04C12-25, N/A Clamp, Uses QI-NE-0200-0002-GF Inserts
• Spade Drill Insert: 0.622″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.2204″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6496″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1338″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Indexable Spade Drill: 15 to 16 mm Dia, 24 mm Max Depth, Straight Flute 20 mm Shank Dia, Flanged Shank, 101.1 mm OAL
• Spade Drill Insert: 5/8″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1614″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Indexable Spade Drill: 0.5906 to 0.6298″ Dia, 61/64″ Max Depth, Straight Flute Flanged Shank
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Spade Drill Insert: 0.6456″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.2244″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 1.1968″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6181″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1377″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6732″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Edge Pulls; Width (Inch): 5-29/32; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 57.0000; Material Grade: 304; Finish/Coating: Satin; Material: Stainless Steel; Material: Stainless Steel
• Spade Drill Insert: 1.2007″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.685″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1653″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 11/16″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.2283″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Masking Tape: 107 mm Wide, 55 m Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Spade Drill Insert: 0.6811″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1692″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Pneumatic Hose Coupling: 1/8″ Thread, High Flow Interchange Brass
• Spade Drill Insert: 1.2047″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6535″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.2322″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 21/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.2598″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Polyethylene Film Tape: 2″ Wide, 5 yd Long, 9.5 mil Thick 160 Lb/In Tensile Strength, Rubber Adhesive, 170 ° F
• Black Tee: 2 x 1 x 1″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Spade Drill Insert: 0.6929″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.1732″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Boring Bar: 0.07″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Spade Drill Insert: 0.6653″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.2086″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Boring Bar: 0.07″ Min Bore, 0.15″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Spade Drill Insert: 0.6889″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: CAC Title 13, AmberClass; Power Source: 12 Volt DC
• Spade Drill Insert: 1.2362″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.6614″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• 5″ Dia, 60 Grit, Aluminum Oxide Coarse Grade, C-Weighted, Paper Backing
• Boring Bar: 0.06″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Spade Drill Insert: 1-17/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Amber; Power Source: 12 Volt DC
• Threaded Rod: 5/8-11, 6' Long, Stainless Steel, Grade 304 (18-8)
• Spade Drill Insert: 0.5118″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Boring Bar: 0.06″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Spade Drill Insert: 1.2637″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Red; Power Source: 12 Volt DC
• Spade Drill Insert: 1.2125″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Soap: 1 gal Bottle Liquid, Clear, Floral Balsam Scent
• Spade Drill Insert: 0.5196″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Red; Power Source: 12 Volt DC
• Boring Bar: 0.06″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Spade Drill Insert: 1.1771″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Red/White; Power Source: 12 Volt DC
• Spade Drill Insert: 33/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Boring Bar: 0.06″ Min Bore, 0.15″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Spade Drill Insert: 1.2401″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Traffic Cone & Barricade Accessories; Accessory Type: Barricade Light; Recycled Content: 0; Height (Inch): 15.75; Height (Decimal Inch): 15.75; Material: Plastic; Tape Length (Feet): 7.00; For Use With: Barricade Lighting; Length (Inch): 7.00; Type: Barri
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Red/ White; Power Source: 12 Volt DC
• Spade Drill Insert: 1/2″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Boring Bar: 0.07″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Spade Drill Insert: 1.244″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Blue/White; Power Source: 12 Volt DC
• Spade Drill Insert: 0.5275″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.2677″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Boring Bar: 0.07″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Sheet: Neoprene Rubber, 12″ Wide, 56″ Long, Black Durometer 70, Plain Backing
• Spade Drill Insert: 1.2716″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Amber/White; Power Source: 12 Volt DC
• Spade Drill Insert: 0.5551″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Laundry Detergent; Form: Liquid; Container Size (oz.): 41; Scent: Crisp Linen; Description: Bottle
• Jobber Length Drill Bit: 0.242″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spade Drill Insert: 1.2165″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Red/Amber; Power Source: 12 Volt DC
• Spade Drill Insert: 17/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1-7/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, White Durometer 50, Plain Backing
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Blue; Power Source: 12 Volt DC
• Spade Drill Insert: 1.2992″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5511″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Sheet: Buna-N Rubber, 1″ Thick, 6″ Wide, 12″ Long, Black Durometer 40, Plain Backing
• Spade Drill Insert: 1.248″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Plastic Sheet: Acetal, 1-1/2″ Thick, Black Rockwell M-90
• Spade Drill Insert: 0.5236″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Ball Grip Quick-Release Pin: Button Handle, 9/16″ Pin Dia, 4″ Usable Length 5.41″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Spade Drill Insert: 1.2755″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Black Hex Locknut: 3″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Spade Drill Insert: 0.5078″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1-1/4″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Parts Washer Flow-Through Brush Synthetic Bristles, 2-1/2″ Bristle Length, 10″ Long x 5″ Wide x 1-1/4″ High, For Use with Parts Cleaners
• Spade Drill Insert: 0.5354″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Spade Drill Insert: 1.3031″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• 3mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Spade Drill Insert: 1.2795″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5905″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Wire Shelf with Split Sleeves: Use with Wire Shelves