Products

• M12 Screw 20mm OAL 12mm ID x 19mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Standard-Duty Shock Absorber: 6 mm Rod Dia, 25.4 mm OD, 7 mm Stroke, M14 x 2 Thread 56 mm OAL, 4.9 lb Force
• Metering Pump Accessories; Type: Liquid End Preventative Maintenance Kit; Accessory Type: Liquid End Preventative Maintenance Kit; For Use With: LMI FASTPRIME Liquid Ends: 822xx,828xx,920Nx,920Sx,928Nx,928Sx; For Use With: LMI FASTPRIME Liquid Ends: 822xx
• Engraving Cutter: 1,200 °, 1/8″ Dia, Pointed AlTiN Finish, 0.036″ LOC, 1″ Shank, 1-1/2″ OAL, 3 Flutes
• Lavatory Faucets; Type: Bottom Mount Kitchen Faucet; Inlet Location: Back; Spout Type: Swivel Gooseneck; Rigid; Inlet Pipe Size: 1/2 in; Design: Two Handle; Inlet Gender: Male; Handle Type: Wrist Blade; Maximum Flow Rate: 1.5; Mounting Centers: 8; Materia
• Wall Clocks; Type: 24 Hour Wall Clock; Display Type: Analog; Power Source: (1) AA Battery; Face Color: White/Gray; Case Color: Brown; EPP Indicators: Biodegradable; Pre Consumer Recycled Content : 0; Total Recycled Content: 0; Post Consumer Recycled Conte
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Door Closer Accessories; For Use With: LCN 1260 Series Door Closers; Finish/Coating: Brass; For Use With: LCN 1260 Series Door Closers
• Envelope Mailer: 10″ OAW, 13″ OAL
• Black Reducing Coupling: 2 x 1/2″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Plastic Bar: Polytetrafluoroethylene, 1/32″ Thick, White
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Door Closer Accessories; For Use With: LCN 1260 Series Door Closers; Finish/Coating: Sprayed Dark Bronze; For Use With: LCN 1260 Series Door Closers
• M8x1.25 Coarse 16mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Door Closer Accessories; For Use With: LCN 4040XP Series Door Closers; Body Length: 6.125; Finish/Coating: Sprayed Aluminum; For Use With: LCN 4040XP Series Door Closers
• Full Face Respirator: Silicone, Large 4-Point Suspension, Bayonet Connection
• 1″ Inlet, ASME Safety Valve MNPT Ends, 200 Max psi, Brass
• Black Hex Bushing: 6 x 4″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Square End Mill: 7/64'' Dia, 0.57'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Full Face Respirator: Silicone, Medium 4-Point Suspension, Bayonet Connection
• Stripper: All Types Of Flooring
• Ball Grip Quick-Release Pin: T-Handle, 1″ Pin Dia, 1-3/4″ Usable Length 3.92″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Plastic Sheet: High Density Polyethylene, 3/4″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Square End Mill: 0.014'' Dia, 0.021'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball Grip Quick-Release Pin: T-Handle, 1″ Pin Dia, 1-1/4″ Usable Length 3.42″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Ball Grip Quick-Release Pin: T-Handle, 1″ Pin Dia, 1-1/2″ Usable Length 3.67″ OAL, 17-4 Stainless Steel, Aluminum Handle
• Plastic Sheet: Garolite, 1/32″ Thick, Off-White, 18,000 psi Tensile Strength Rockwell M-100
• Chamfer Mill: 5 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Floor Cleaner: 5 gal Pail, Use On Floors Hard Floor Care
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 3/8″ Thick, Gray, 4,250 psi Tensile Strength Shore D-70
• Power Tool Battery: 24V, Lithium-ion, NiCd & NiMH
• Plastic Sheet: Polyvinylchloride, 3/4″ Thick, Gray Rockwell R-110
• Deep Groove Ball Bearing: 110 mm OD 6,475 lb Static Load
• Square End Mill: 0.013'' Dia, 0.019'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Straight Strain Relief Cord Grip
• M5x0.8, 31.53mm OAL, 10mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 22mm Body Length, 9.53mm Thread Length, 12.7mm Thread Depth, Grade 303, Uncoated
• Dish Detergent; Form: Liquid; Container Type: Bottle; Container Size (oz.): 8.45; Scent: Fresh; For Use With: Cleaner
• Clear Double-Sided Acrylic Foam Tape: 1/2″ Wide, 4 yd Long, 31 mil Thick, Acrylic Adhesive
• Gasket Tapes; Thickness: 1/4; Width (Inch): 3/4; Color: Black; Material: Vinyl Foam; Length (Feet): 5 yd; Material: Vinyl Foam
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Standard-Duty Shock Absorber: 2.4 mm Rod Dia, 15 mm OD, 8 mm Stroke, M10 x 1 Thread 65.2 mm OAL, 5.88 lb Force
• Hex Head Cap Screw: 1/2-13 x 1-1/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Strobe & Flashing Lights; Light Type: Revolving; Flashing; Lens Color: Blue; Lamp Type: LED; Mounting Type: Magnetic; NEMA Rating: 6; Voltage: All IQv Batteries; Recommended Environment: Industrial; Flashes Per Minute: 60
• Illuminated Exit Signs; Number of Faces: 2; Light Technology: LED; Letter Color: Red; Housing Material: Aluminum; Housing Color: White; Battery Type: Sealed Nickel Cadmium; Wattage: 1 W; Overall Length: 1 in; Overall Length (Decimal Inch): 1; Overall Widt
• Freshmatic Ultra Spray Refill
• Grooving Tool: Internal Solid Carbide
• Ball Grip Quick-Release Pin: L-Handle, 20 mm Pin Dia, 90 mm Usable Length 133.7 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 40, High Temperature Adhesive Backing
• Hex Head Cap Screw: 3/4-10 x 4-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Traffic Cone & Barricade Accessories; Accessory Type: Barricade Light; Recycled Content: 0; Height (Inch): 15.75; Height (Decimal Inch): 15.75; Material: Plastic; Tape Length (Feet): 7.00; For Use With: Barricade Lighting; Length (Inch): 7.00; Type: Barri
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Plastic Sheet: High Density Polyethylene, 1/2″ Thick, Opaque White Shore D-60
• Cork Bulletin Boards; Style: Cubicle Cork Board; Color: Light Brown; Material: Cork; Width (Inch): 24; Material: Cork
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Black Tee: 2 x 1-1/4 x 1-1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Sheet: Polyurethane Rubber, 12″ Wide, 36″ Long, Amber Durometer 60, Acrylic Adhesive Backing
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Extra Length Drill Bit: 0.4531″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 503
• M6x1.0 Coarse 20mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Extra Length Drill Bit: 0.4689″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 503
• ER32 Spanner Wrench For Use with ER Externally Threaded Nuts
• Extra Length Drill Bit: 0.3504″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• Wrenches For Indexables; Wrench Type: Lock Screw Wrench; Indexable Tool Type: Toolholder; Drive Type: Slotted; Toolholder Style Compatibility: C6-CT-01; Hardware Compatibility: Coolant Supply Unit; Overall Length: 4.92; Tool Material: Steel; Series: C6; T
• ER: ER25, 2.5 mm 34mm OAL, 26mm Overall Diam, 0.0004″ TIR
• Plastic Bar: Polytetrafluoroethylene, 3/8″ Thick, White
• Extra Length Drill Bit: 0.4063″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 504
• ER: ER25, 5.5 mm 34mm OAL, 26mm Overall Diam, 0.0004″ TIR
• Pry Bars; Prybar Type: Hand Hookeroon; Overall Length Range: 25 to 35.9 in; Overall Length (mm): 820.00; Overall Length (Inch): 32-1/4
• Closed Cell Neoprene Foam: 6″ Wide, 120″ Long, Black Acrylic Adhesive Backing
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 8.0000; Outside Diameter: 13.5000; Wall Thickness (mm): 2.75; Material: Viton; Standard Coil Length (Feet): 2; Maximum Working Pressure (psi): 145; Hardness: 70A; Special Item Information: Aramid Bra
• Combination Drill & Reamers; Reamer Size (mm): 0.3125; Reamer Size (Decimal Inch): 0.3125; Reamer Size (Inch): 5/16; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch):
• Single Profile Thread Mill: #5-40 to #5-44, 40 to 44 TPI, Internal & External, 4 Flutes, Solid Carbide 3/16″ Shank Dia, 2″ OAL, Bright/Uncoated
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: DBCJ; Rake: Negative; Rake Angle: -6; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Double Clamp; Shank Width (Decimal Inch): 0.7874; Insert Compatibility: WNMG43
• ER: ER25, 6.5 mm 34mm OAL, 26mm Overall Diam, 0.0004″ TIR
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: DBCJ; Rake: Negative; Rake Angle: -6; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Double Clamp; Shank Width (Decimal Inch): 0.7874; Insert Compatibility: DNMX43
• ER: ER25, 8 mm 34mm OAL, 26mm Overall Diam, 0.0002″ TIR
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 15 mm OD, 8 mm Stroke, M10 x 1 Thread 55 mm OAL, 4.9 lb Force
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• ER: ER25, 9 mm 34mm OAL, 26mm Overall Diam, 0.0002″ TIR
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 15 mm OD, 8 mm Stroke, M10 x 1 Thread 55 mm OAL, 4.9 lb Force
• Spray Booth Accessories
• ER20 Clamping Nut Through Coolant
• ER: ER25, 12.5 mm 34mm OAL, 26mm Overall Diam, 0.0004″ TIR
• Boom: Oil Only, 5″ Dia, 10' OAL, 6 gal Absorption, Polypropylene, White
• Buna-N Tube: 1/2″ ID, 3/4″ OD, Standard Roll 25' 25 Max psi, Black
• Standard-Duty Shock Absorber: 3 mm Rod Dia, 15 mm OD, 8 mm Stroke, M10 x 1 Thread 55 mm OAL, 4.9 lb Force
• Shop Roll 2″ 100GRIT W/DUST MASK TRU-MAXX SHOP ROLL
• MIG Welding Wire: 0.045″ Dia 10 lb
• Shop Roll 2″ 220GRIT W/DUST MASK TRU-MAXX SHOP ROLL
• Laser Printer: Cyan Use with Dell H625cdw, H825cdw, S2825cdn
• Safety Exhaust: 1-1/4″ Pipe, Full Port, Brass 1-Way Flow & In-Line, Female NPT, 200 psi WOG
• ER11 Clamping Nut
• Sheet: Silicone Rubber, 24″ Wide, 36″ Long, White Durometer 50, Plain Backing
• ER: ER20, 0.125″ 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• ER: ER25, 11 mm 34mm OAL, 26mm Overall Diam, 0.0002″ TIR
• Tap Collet: ER25, 0.367″ 1/2″ Tap
• Strip: Silicone Rubber, 6″ Wide, 120″ Long, Red Durometer 40, High Temperature Adhesive Backing
• ER: ER25, 0.2813″ 34mm OAL, 26mm Overall Diam, 0.0002″ TIR
• Tap Collet: ER25, 0.323″ 7/16″ Tap
• Single Profile Thread Mill: M2 x 0.40, Internal & External, 3 Flutes, Solid Carbide 1.5″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Tap Collet: ER25, 0.255″ 1/4″ Tap
• Single Profile Thread Mill: M2 x 0.40, Internal & External, 3 Flutes, Solid Carbide 1.5″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 173 mm OAL, 33.2 lb Force
• Single Profile Thread Mill: M1.6 x 0.35, Internal & External, 3 Flutes, Solid Carbide 1.16″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• Taper Length Drill Bit: 0.3701″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• ER: ER20, 0.4375″ 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• Single Profile Thread Mill: M3 x 0.50, Internal & External, 4 Flutes, Solid Carbide 2.3″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• Plastic Bar: Acetal, 1″ Thick, White
• ER: ER20, 9 mm 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• Air Fair Cherry Ready-to-Use Malodor Counteractant
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Single Profile Thread Mill: M2.5 x 0.45, Internal & External, 3 Flutes, Solid Carbide 1.9″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• ER: ER20, 13 mm 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• Lemon Peel Dry Deodorizer (Hand Held)
• Single Profile Thread Mill: M3 x 0.50, Internal & External, 4 Flutes, Solid Carbide 2.3″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• ER: ER20, 7 mm 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 25 mm Stroke, M27 x 1.5 Thread 156 mm OAL, 27.3 lb Force
• Single Profile Thread Mill: M1.6 x 0.35, Internal & External, 3 Flutes, Solid Carbide 1.16″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• ER: ER20, 0.5″ 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 25 mm Stroke, M27 x 1.5 Thread 156 mm OAL, 44.2 lb Force
• Single Profile Thread Mill: M2.5 x 0.45, Internal & External, 3 Flutes, Solid Carbide 1.9″ Cut Dia, 3″ Shank Dia, 1.4961″ OAL, AlTiN Nano Coated
• ER: ER20, 12 mm 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• Compression Packing; Material: Carbon Fiber; Size: 3/8; Spool Length: 5; Color: Black; Maximum Working Pressure (psi): 4000.0 psi; 4000; PSC Code: 5330; Color: Black; Maximum Working Pressure: 4000.0 psi; Material: Carbon Fiber
• Felt Stripping; Backing Type: Plain; Thickness (Inch): 1/4; Width (Inch): 1; 1 in; Length (Feet): 10.0 ft; 10; SAE Grade: F1
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 25 mm Stroke, M27 x 1.5 Thread 156 mm OAL, 27.3 lb Force
• PAPR Cartridges & Filters; Type: Filter; Product Type: Filter; Protection Type: Particulates; Filter Type: Pre-Filter; Color Code: White; For Use With: RPB PX5 PAPR; Number Of Pieces: 10.000
• Desoldering Pump Tips; Inside Diameter (mm): 1.0000; Outside Diameter (Decimal Inch): 2.2000; Outside Diameter (mm): 2.2000; Overall Length (mm): 11.0000
• Felt Stripping; Backing Type: Plain; Thickness (Inch): 1/8; Width (Inch): 2; 2 in; Length (Feet): 10.0 ft; 10; SAE Grade: F1
• Closed Cell Neoprene Foam: 36″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Desoldering Pump Tips; Inside Diameter (mm): 1.0000; Outside Diameter (Decimal Inch): 2.2000; Outside Diameter (mm): 2.2000; Overall Length (mm): 11.0000
• Deep Groove Ball Bearing: 110 mm OD Bearing Number 6014
• Desoldering Pump Tips; Inside Diameter (mm): 2.0000; Outside Diameter (Decimal Inch): 3.4000; Outside Diameter (mm): 3.4000; Overall Length (mm): 11.0000
• Taper Shank Drill Bit: 0.5469″ Dia, 1MT, 130 °, High Speed Steel Bright/Uncoated & Oxide, 9.8425″ Flute Length, 14.7638″ OAL, Cone Relief Point, Parabolic Flute
• Taper Length Drill Bit: 0.3543″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Polyethylene Tube: 1/4″ ID x 1/2″ OD, 50' Long 340 Max psi, Clear
• KTFSS09500FEGM Carbide Replaceable Tip Drill AlTiN Finish, 180° Included Angle, 9.5mm Diam, Through Coolant, Series KenTIP FS
• EPDM Foam: 2″ Wide, 120″ Long, Black Plain Backing
• KTFSS08520FEGM Carbide Replaceable Tip Drill AlTiN Finish, 180° Included Angle, 8.52mm Diam, Through Coolant, Series KenTIP FS
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 11.99; Drill Diameter (Decimal Inch): 0.4720; Maximum Drill Diameter (Decimal Inch): 0.4720; Drill Diameter (mm): 11.99; Maximum Drill Depth (Decimal Inch): 1.0600; Maximum Drill Dep
• Strobe & Flashing Lights; Light Type: Revolving; Lens Color: Blue; Lamp Type: LED; Mounting Type: Magnetic; NEMA Rating: 6; Voltage: All IQv Batteries; Recommended Environment: Industrial; Flashes Per Minute: 60
• Indexable Insert Drills; Drill Style: TCAP; Maximum Drill Diameter (mm): 12.00; Drill Diameter (Decimal Inch): 0.4724; Maximum Drill Diameter (Decimal Inch): 0.4724; Drill Diameter (mm): 12.00; Maximum Drill Depth (Inch): 1-1/16; Maximum Drill Depth (Deci
• Plastic Sheet: Carbon Fiber, 1/8″ Thick, Black
• Taper Length Drill Bit: 0.8750″ Dia, 118 ° Black Oxide Finish, 6.125″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Extra Length Drill Bit: 0.1299″ Dia, 130 °, High Speed Steel Uncoated, 4.134″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• ER16, ER20, ER25, ER32 Torque Wrench For Use with Torque Wrench Heads
• Electrical Outlet Boxes & Switch Boxes; Enclosure Type: Device; Enclosure Shape: Rectangle; Weather Resistance: Non-Weather-Resistant; Overall Depth: 2 in; Number Of Knockouts: 2; Overall Depth (Decimal Inch): 2; Knockout Trade Size: 1 in; Number Of Gangs
• Grooving Tool: LH Cut Solid Carbide
• Bleach; Form: Liquid; Container Type: Bottle; Container Size (oz.): 81.00; Harshness: Moderate; Scent: Unscented
• Plastic Sheet: Acetal, 5/8″ Thick, White Rockwell M-90
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: RC..3209; Toolholder Style: PRDCN; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Insert Holding Method: Lever; Shank Width (Decimal Inch): 2.0000; Shank Width
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• Grooving Tool: LH Cut Solid Carbide
• Laser Printer: Black Use with Brother DCP-L2520DW, L2540DW, HL-L2300D, L2305W, L2320D, L2340DW, L2360DW, L2380DW & MFC-L2680W & L2700DW
• Spot Welder Tips; Tip Type: Straight Shank for 4RW Female Cap; Material: RWMA Class 3 - C18000; Type: Straight Shank for 4RW Female Cap
• Taper Length Drill Bit: 0.3740″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Cordless Hammer Drill: 18V, 1/2″ Chuck, 2,500 BPM, 1,700 RPM Keyless Chuck, Reversible, 2
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4300; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Taper Length Drill Bit: 0.4331″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 0.7500; Shank Widt
• Grooving Tool: RH Cut Solid Carbide
• Washroom Shelves, Soap Dishes & Towel Holders; Type: Fixture Mounted Towel Bar; Towel Rod; Holder Type: Towel Rod; Material: Metal; Mount Type: Wall; Overall Height: 3.50; Finish: Chrome-Plated; Material: Metal; Finish/Coating: Chrome; Chrome-Plated
• Toilet Seats; Type: Open Front w/ Cover and Self-Sustaining; Style: Self-Sustaining; Material: Plastic; Color: White; Outside Width: 14-3/8; Inside Width: 0; Length (Inch): 18.5; Minimum Order Quantity: Plastic; Material: Plastic
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4800; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Ball End Mill: 0.2656″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 0.7500; Shank Width
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4800; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Ball Grip Quick-Release Pin: L-Handle, 5/16″ Pin Dia, 2″ Usable Length 3-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Rail Mount Kits & Parts; Type: Guard Post; For Use With: Use with RailGuard 200; For Use With: Use with RailGuard 200
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4300; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Engraving Cutter: 1,200 °, 0.03″ Dia, Tip Radius Point AlTiN Nano Finish, 0.035″ LOC, 1″ Shank, 1-1/2″ OAL, 2 Flutes
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Square End Mill: 7/32'' Dia, 5/8'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Sheet: Neoprene Rubber, 36″ Wide, 48″ Long, Black Durometer 60, Plain Backing
• Grooving Tool: RH Cut Solid Carbide
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch): 0.
• Grooving Tool: RH Cut Solid Carbide
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 20' Long x 12' Wide, 12 mil Polyethylene, Rectangle
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 40' Long x 6' Wide, 12 mil Polyethylene, Rectangle
• Blind Rivets; Rivet Type: Open End; Head Type: Button; Head Diameter: 0.3120 in; Size Code: 56; Minimum Grip: 0.251 in; Rivet Material: Aluminum; Mandrel Material: Aluminum; Maximum Grip: 0.375 in; Minimum Grip (Decimal Inch): 0.2510; Minimum Hole Diamete
• Grooving Tool: LH Cut Solid Carbide
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1″ Wide x 6″ Long x 1/2″ Thick
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Spade Drill Insert: 1.37″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Micro Drill Bit: 0.1083″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Ball Grip Quick-Release Pin: Button Handle, 5/8″ Pin Dia, 5″ Usable Length 6-1/2″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• KTFST03125DAL Carbide Replaceable Tip Drill Diamond Finish, 128° Included Angle, 5/16″ Diam, Series KenTIP FS
• Grooving Tool: LH Cut Solid Carbide
• Spade Drill Insert: 0.9606″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• KTFST03125SPF Carbide Replaceable Tip Drill Diamond Finish, 128° Included Angle, 5/16″ Diam, Series KenTIP FS
• Micro Drill Bit: 0.0886″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Grooving Tool: RH Cut Solid Carbide
• #4-40, 0.499″ OAL, 1/4″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 0.312″ Body Length, 3/16″ Thread Length, 3/16″ Thread Depth, Grade 316, Passivated
• Spade Drill Insert: 0.9881″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Micro Drill Bit: 0.0709″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Spade Drill Insert: 1-3/8″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• #8-32, 3/4″ OAL, 3/8″ Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 3/8″ Body Length, 3/8″ Thread Length, 3/16″ Thread Depth, Grade 360, Zinc-Plated
• Micro Drill Bit: 0.0689″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Spade Drill Insert: 1.374″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Micro Drill Bit: 0.063″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Taper Length Drill Bit: 0.3125″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Spade Drill Insert: 0.9645″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• #10-32, 1-1/2″ OAL, 3/8″ Across Flats, Steel Female Hex Circuit Board Standoff Partially Threaded, Grade 12L14, Zinc-Plated
• Micro Drill Bit: 0.0669″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Taper Length Drill Bit: 0.3071″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Welded Bandsaw Blade: 27' 2″ Long, 1/2″ Wide, 0.02″ Thick, 10 TPI Carbon Steel, Toothed Edge
• Spade Drill Insert: 0.9921″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Micro Drill Bit: 0.0768″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Taper Length Drill Bit: 0.3031″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 336
• Wall Clocks; Type: Wall Clock; Display Type: Analog; Power Source: (1) AA Battery; Face Color: White; Case Color: Black; EPP Indicators: Biodegradable; Pre Consumer Recycled Content : 0; Total Recycled Content: 0; Post Consumer Recycled Content: 0
• Spade Drill Insert: 31/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Micro Drill Bit: 0.0492″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Taper Length Drill Bit: 0.3071″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Micro Drill Bit: 0.1004″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Spade Drill Insert: 0.996″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• 1/4″ Screw 7/8″ OAL 0.252″ ID x 5/8″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Taper Length Drill Bit: 0.3230″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Micro Drill Bit: 0.0394″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• CD-R Disc: Use with CD
• Spade Drill Insert: 1.0236″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Extra Length Drill Bit: 0.3071″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Micro Drill Bit: 0.0571″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• All-Purpose Cleaner: 1 gal Bottle Liquid, Quaternary Scent
• Spade Drill Insert: 0.9724″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Screw Machine Length Drill Bit: 0.2031″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Extra Length Drill Bit: 0.315″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Micro Drill Bit: 0.0472″ Dia, 140 °, Solid Carbide ALtima Finish, RH Cut, Helical Flute, Straight-Cylindrical Shank
• Spade Drill Insert: 1″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Taper Length Drill Bit: 0.3390″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 336
• Chucking Reamer: 0.0292″ Dia, 1-1/2″ OAL, 1/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Spade Drill Insert: 1.0275″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2