Products

• Micro Drill Bit: 0.0984″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Registers & Diffusers; Type: Air Deflector Vent Cover; Style: 1 Way; Material: Plastic; Length (Decimal Inch): 24.5 in; Height (Inch): 2.75; Diameter (Decimal Inch): 24.0000; Width (Decimal Inch): 24.5 in; PSC Code: 5120; Material: Plastic
• Roll: Neoprene Rubber, 12″ Wide, Black Durometer 50, Plain Backing
• Micro Drill Bit: 0.1079″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Roll: Buna-N Rubber, 12″ Wide, Black Durometer 50, Plain Backing
• Micro Drill Bit: 0.1075″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 3/64'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Micro Drill Bit: 0.1071″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Micro Drill Bit: 0.1067″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 0.1'' Dia, 19/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Diamond Pattern Router Bit: 2″ LOC, 1/4″ Shank Dia, End Mill 4″ OAL, Solid Carbide, Bright/Uncoated
• Micro Drill Bit: 0.1059″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 5/64'' Dia, 0.24'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• M5x0.8, 25.53mm OAL, 10mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 16mm Body Length, 9.53mm Thread Length, 11.6mm Thread Depth, Grade 303, Uncoated
• Micro Drill Bit: 0.1055″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 3/64'' Dia, 0.15'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Micro Drill Bit: 0.1051″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 0.085'' Dia, 0.255'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal I
• Grinding Inserts; For Use With: ALUMASTER; Material: Aluminum; Finish/Coating: Carbide; Material Application: Aluminum; Series: ALUMASTER
• Micro Drill Bit: 0.1047″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Grinding Inserts; For Use With: ALUMASTER; Material: Aluminum; Finish/Coating: Carbide; Material Application: Aluminum; Series: ALUMASTER
• Micro Drill Bit: 0.1039″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 3/64'' Dia, 0.075'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal I
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 90, Plain Backing
• Micro Drill Bit: 0.1035″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Edge & Center Finder Accessories; Type: Probe Insert; Includes: 1 Probe Insert; For Use With: REGO-FIX EdgeMaster; Accessory Type: Probe Insert
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Micro Drill Bit: 0.1032″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Plastic Sheet: Polyvinylchloride, 1/2″ Thick, 32″ Long, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Replaceable Tip Drill: 9 to 9.4 mm Drill Dia, 72 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses DMP Inserts, 133.72 mm OAL, Through Coolant
• Square End Mill: 0.045'' Dia, 0.067'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2800; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• GFCI Receptacles; Grade: Commercial; Color: Ivory; NEMA Configuration: 5-20R; Amperage: 20; Reset Type: Manual; Voltage: 125 VAC; Wiring Method: Side; Back; Body Material: Thermoplastic Nylon; Flange Style: No Flange; Flange Included: No; Amperage: 20 A;
• Replaceable Tip Drill: 7.5 to 7.9 mm Drill Dia, 60 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses DMP Inserts, 116.38 mm OAL, Through Coolant
• Micro Drill Bit: 0.1028″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 7/64'' Dia, 0.165'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 1/4; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Replaceable Tip Drill: 8.5 to 8.9 mm Drill Dia, 68 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses DMP Inserts, 129.55 mm OAL, Through Coolant
• Micro Drill Bit: 0.102″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• 3 Piece, M8 Thread Adapter Kit for Manual Insert Tool Must Also Buy AA480N or AA510N to Make a Full System, for Use with AA480
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Replaceable Tip Drill: 9.5 to 9.9 mm Drill Dia, 76 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses DMP Inserts, 137.72 mm OAL, Through Coolant
• Micro Drill Bit: 0.1016″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 0.118'' Dia, 0.177'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Replaceable Tip Drill: 8 to 8.4 mm Drill Dia, 64 mm Max Depth, 10 mm Straight-Cylindrical Shank Uses DMP Inserts, 125.55 mm OAL, Through Coolant
• Micro Drill Bit: 0.1008″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Chucking Reamer: 0.0935″ Dia, 2-1/2″ OAL, 11/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3220; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Replaceable Tip Drill: 7 to 7.4 mm Drill Dia, 56 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses DMP Inserts, 112.38 mm OAL, Through Coolant
• Micro Drill Bit: 0.1012″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Single Profile Thread Mill: 5/16-18 to 5/16-48, 18 to 48 TPI, Internal & External, 4 Flutes, Solid Carbide 0.24″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, Bright/Uncoated
• Standard-Duty Shock Absorber: 4.5 mm Rod Dia, 18 mm OD, 10 mm Stroke, M8 x 0.75 Thread 78 mm OAL, 5.88 lb Force
• Chucking Reamer: 0.08″ Dia, 2″ OAL, 9/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Micro Drill Bit: 0.0996″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Replaceable Tip Drill: 6.5 to 6.9 mm Drill Dia, 52 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses DMP Inserts, 108.53 mm OAL, Through Coolant
• Standard-Duty Shock Absorber: 4.5 mm Rod Dia, 18 mm OD, 10 mm Stroke, M8 x 0.75 Thread 78 mm OAL, 5.88 lb Force
• Square End Mill: 3/64'' Dia, 0.15'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal I
• Replaceable Tip Drill: 6 to 6.4 mm Drill Dia, 48 mm Max Depth, 8 mm Straight-Cylindrical Shank Uses DMP Inserts, 104.44 mm OAL, Through Coolant
• Micro Drill Bit: 0.1″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Hex Head Cap Screw: 3/8-24 x 3-1/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Standard-Duty Shock Absorber: 4.5 mm Rod Dia, 18 mm OD, 10 mm Stroke, M8 x 0.75 Thread 78 mm OAL, 5.88 lb Force
• 3/4″ Screw 7/8″ OAL 3/4″ ID x 1-1/2″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Micro Drill Bit: 0.0992″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 2 Flute, 0.0063″ Chamfer Width, Solid Carbide 3.62 mm OAL, Bright/Uncoated, Centercutting
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Corner Chamfer End Mill: 0.7087″ Dia, 1.2598″ LOC, 2 Flute, 0.0071″ Chamfer Width, Solid Carbide 3.66 mm OAL, Bright/Uncoated, Centercutting
• Micro Drill Bit: 0.0988″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK263; Series: PK263
• Welding Helmet: Black & Red, Nylon, Shade 9 to 13
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.2520; Maximum Bore Depth (Decimal Inch): 1-1/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 5/16; Projection: Projection; Finish/Coating: Uncoated; Projection (Decim
• Lumber; Thickness: 2; Width: 12; Length Ft.: 10; Wood Type: Southern Yellow Pine; Grade: #2; Treated: KDHT
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Hex Nut: 5/16-24, Grade 9 Steel, Zinc-Plated Clear Chromate Right Hand Thread, 1/2″ Across Flats, ANSI & ASME B18.2.2
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Hex Head Cap Screw: 3/8-16 x 5″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Closed Cell Neoprene Foam: 12″ Wide, 12″ Long, Black Plain Backing
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.059″ Groove Width
• Taper Length Drill Bit: 0.2656″ Dia, 130 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 669
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 4 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Hex Lock Nut: 5/8-18, Grade 9 Steel, Cadmium-Plated with Wax 0.542″ High, 15/16″ Width Across Flats, Right Hand Thread
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD103; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD101; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Faucet Replacement Parts & Accessories; Type: Replacement Spout; For Use With: Pot Filler Faucets; Additional Information: Used on pot filler faucets.; Type: Replacement Spout; Type: Replacement Spout; Type: Replacement Spout; Type: Replacement Spout; Des
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Thread Forming Tap: #4-48, DIN 2184-1, 2BX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Square End Mill: 0.045'' Dia, 0.135'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4800; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 10' Long x 10' Wide, 16 mil Polyethylene, Rectangle
• 2.4mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4300; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.2500; Drill Bit Size (Inch): 0.2500; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Reamer; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal I
• Ink Cartridge: Yellow Use with MFC-J995DW, MFC-J995DW XL, MFC-J805DW, MFC-J805DW XL & MFC-J815DW XL
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4300; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• 2.3mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Square End Mill: 0.1'' Dia, 0.15'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• 2.26mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• 2.38mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4320; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal
• Tarp/Dust Cover: Black, Rectangle, Polyethylene, 10' Long x 8' Wide, 18 mil Polyethylene, Rectangle
• 2.44mm Minor140° Solid Carbide Subland Step Drill Bit TiALN Lite Finish, 50mm OAL, Series CoroDrill 862
• Gray Double-Sided Foam Tape: 3/4″ Wide, 5 yd Long, 25 mil Thick, Acrylic Adhesive
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4320; Maximum Bore Depth (Decimal Inch): 1-1/4; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Taper Length Drill Bit: 0.5313″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3800; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inch):
• Ball Grip Quick-Release Pin: T-Handle, 1/4″ Pin Dia, 5″ Usable Length 6-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.087″ Groove Width
• Blowers & Mulchers; Blower Type: Cordless; Power Type: Battery; Maximum Air Speed: 143; Minimum Air Speed: 120; Air Flow (CFM): 565
• Plastic Sheet: Acetal, 3/8″ Thick, Black Rockwell M-90
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Rocker Switch; Pushbutton Shape: Square; Pushbutton Color: White; Operator Illumination: Illuminated; Operation Type: Momentary (MO); Voltage: 12 to 24 VDC; Contact Form: SPDT
• Floor Pads, Bonnets & Screens; Type: Scrubbing Pad; Pad Diameter: 19 in; Pad Color: Gray; Material: Plastic; Grit Grade: Non-Abrasive; Machine Size (Inch): 18; Included Accessories: Clutch Plate & Riser; Applications: General Cleaning; Application: Genera
• ER: ER20, 1 mm 31.5mm OAL, 21mm Overall Diam, 0.0002″ TIR
• 18″ Plastic Snow Scoop 52″ D-Grip Aluminum Handle
• Deep Groove Ball Bearing: 115 mm OD 6,407 lb Static Load
• Barrier Rope & Chain; Color: Polished Stainless Steel; Snap End Material: Steel; Length (Feet): 6.0 ft; Overall Length: 6.0 ft; Rope/Chain Color: Black
• Deep Groove Ball Bearing: 115 mm OD 6,924 lb Static Load
• Taper Length Drill Bit: 0.2520″ Dia, 130 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 669
• Taper Length Drill Bit: 0.2677″ Dia, 130 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 669
• Taper Length Drill Bit: 0.2720″ Dia, 130 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Reciprocating Saw Blade: Solid Carbide Straight, Universal Shank
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Hex Head Cap Screw: 3/8-16 x 1-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Jobber Length Drill Bit: 0.2571″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Blue; Power Source: 12 Volt DC
• 3 in Non-Woven Polyester Fiber Rectangular Burnishing Pad, 175 to 600 rpm, Green, 72 PK
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3150; Insert Compatibility: CCGT215 ™; CCGW
• Baby Wipes: Refill, 7 x 7″ Sheet, White
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3150; Insert Compatibility: DPET215 ™; Sha
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Amber; Power Source: 12 Volt DC
• Combination Drill & Reamers; Reamer Size (mm): #21; 0.1590; Reamer Size (Decimal Inch): 0.1590; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch): 6; Spiral Direction:
• Hand Cleaner: 1.2 L Bottle Foam, Peach, Original Scent
• Emergency Light Assemblies; Type: Led Warning Light; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Red; Power Source: 12 Volt DC
• Combination Drill & Reamers; Reamer Size (mm): #20; 0.1610; Reamer Size (Decimal Inch): 0.1610; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch): 6; Spiral Direction:
• Die Drill Bit: 0.2402″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Emergency Light Assemblies; Type: Flashing Led Warning; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Blue/White; Power Source: 12 Volt DC
• Shirts; Garment Type: General Purpose; Size: X-Large; Color: Black; Color: Black; Material: FR Cotton; Material: Cotton; Hazardous Protection Level: 2; Chest Size (Inch): 46-50; Sleeve Length: 40; Closure Type: Button
• Combination Drill & Reamers; Reamer Size (mm): 0.1563; Reamer Size (Decimal Inch): 0.1563; Reamer Size (Inch): 5/32; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch):
• Emergency Light Assemblies; Type: Led Warning Light; Flash Rate: Variable; Flash Rate (FPM): 13; Mount: Surface; Color: Red; Power Source: 12 Volt DC
• Swiss-Pattern File: 8″ OAL, Cut 0, Taper 6″ LOC, 13/32″ Wide, 13/32″ Thick, Tang
• Strobe & Flashing Lights; Light Type: Revolving; Lens Color: Blue; Lamp Type: LED; Mounting Type: Base Mount; Pipe Mount; NEMA Rating: 6P; Voltage: Solar Powered; Recommended Environment: Industrial; Flashes Per Minute: 60
• Wall Clocks; Type: Wall Clock; Display Type: Analog; Power Source: (1) AA Battery; Face Color: White; Case Color: Brown; EPP Indicators: Biodegradable; Pre Consumer Recycled Content : 0; Total Recycled Content: 0; Post Consumer Recycled Content: 0
• Shirts; Garment Type: General Purpose; Size: Large; Color: Black; Color: Black; Material: FR Cotton; Material: Cotton; Hazardous Protection Level: 2; Chest Size (Inch): 42-46; Sleeve Length: 40; Closure Type: Button
• 19″ Plastic Snow Shovel 49″ D-Grip Aluminum Handle
• Shirts; Garment Type: General Purpose; Size: Medium; Color: Black; Color: Black; Material: FR Cotton; Material: Cotton; Hazardous Protection Level: 2; Chest Size (Inch): 38-42; Sleeve Length: 40; Closure Type: Button
• Plastic Rod: Acetal, 2' Long, 2″ Dia, White Rockwell M-90
• #8 Screw 1-3/4″ OAL 0.166″ ID x 5/16″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Emergency Light Assemblies; Type: Flush Mount Led Warning Light; Flash Rate: Stop/Tail/Turn; Mount: Flush Mount; Color: Red/ White; Power Source: 12-24V DC; Shape: Oval; Specifications: FMVSS 108, SAE J13968 & J593
• Die Drill Bit: 0.3700″ Dia, 135 °, Solid Carbide Coated, Series 200
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• #10 Screw 1-3/4″ OAL 0.192″ ID x 5/16″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Roofing Materials; Area (Sq. Ft.): 432; Color: Desert Tan
• Metering Pump Accessories; Type: Seal Kit; For Use With: CRP750V300CRTC; Length (Decimal Inch): 7.0000; For Use With: CRP750V300CRTC
• Extension Tap: M5 x 0.8, 3 Flutes, TiCN Finish, Cobalt, Long Reach 4-5 P, 15″ Thread Length, 6H Class of Fit
• Foaming Glass Cleaner Foaming Glass Cleaner
• Press Fit Headless Drill Bushing: P, 0.03″ ID, 5/32″ OD 1/4″ OAL, Carbon Steel
• Strobe & Flashing Lights; Light Type: Single Flash Strobe; Flashing, Steady; Lens Color: Blue; Lamp Type: LED; Mounting Type: Magnetic; NEMA Rating: 6; Voltage: Solar Powered; Recommended Environment: Industrial; Flashes Per Minute: 60
• Press Fit Headless Drill Bushing: P, 0.04″ ID, 5/32″ OD 1/4″ OAL, Carbon Steel
• Strobe & Flashing Lights; Light Type: Revolving; Flashing, Steady; Multi-Status Indicator; Lens Color: Amber; Lamp Type: LED; Mounting Type: Magnetic; NEMA Rating: 6; Voltage: Solar Powered; Recommended Environment: Industrial; Flashes Per Minute: 60
• #6 Screw 1-5/16″ OAL 0.14″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Strobe & Flashing Lights; Light Type: Revolving; Flashing, Steady; Multi-Status Indicator; Lens Color: Red; Lamp Type: LED; Mounting Type: Magnetic; NEMA Rating: 6; Voltage: Solar Powered; Recommended Environment: Industrial; Flashes Per Minute: 60
• Single Profile Thread Mill: M4-0.70, 36 to 36 TPI, Internal & External, 4 Flutes, Solid Carbide 3″ Cut Dia, 3″ Shank Dia, 50″ OAL, AlTiN Coated
• #10 Screw 1-5/16″ OAL 0.192″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Square End Mill: 0.012'' Dia, 0.018'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 80, Acrylic Adhesive Backing
• Indexable Boring Bar: A20Q-PWLNL0604-D250, 25.00 mm Min Bore, 20.00 mm Shank Dia, 95.00&deg N/A Steel 180.0000″ OAL, Lever,
• #8 Screw 1-5/16″ OAL 0.166″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Indexable Boring Bar: A20Q-PDUNL1104-D250, 25.00 mm Min Bore, 20.00 mm Shank Dia, 93.00&deg N/A Steel 180.0000″ OAL, Lever,
• Boring Bar: 0.082″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Indexable Boring Bar: A20Q-PDUNR1104-D250, 25.00 mm Min Bore, 20.00 mm Shank Dia, 93.00&deg N/A Steel 180.0000″ OAL, Lever,
• Ball End Mill: 0.025″ Dia, 0.075″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.025″ Dia, 0.037″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Die Drill Bit: 0.3770″ Dia, 140 °, Solid Carbide Uncoated, 1-3/8″ Flute, 3″ OAL, Series 195
• General Purpose Work Gloves: Small, AX-Suede, TrekDry, Thermoplastic Elastomer & Synthetic Leather Black
• Plastic Sheet: Polytetrafluoroethylene, 3/8″ Thick, Black Shore D-55
• Boring Bar: 0.072″ Min Bore, 7/16″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Indexable Boring Bar: A20RSDUCL1127AE, 27.00 mm Min Bore, 20.00 mm Shank Dia, N/A Steel Screw, Uses DCGT325 ™, DCMX325 ™, DCMT325 ™, DCET325 ™ & DCMW325 ™ Inserts
• Reduced Shank Drill Bit: 1-5/16'' Dia, 1/2'' Shank Dia, 118 ™, High Speed Steel 6'' OAL, 3'' Flute Length, Bright/Uncoated Finish, Reduced Shank, Series 625
• Corner Radius End Mill: 0.035″ Dia, 0.105″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Roll: Buna-N Rubber, 36″ Wide, White Durometer 60, Plain Backing
• Disposable Gloves: Size Small, 6.3 mil, Nitrile White, 12″ Length, Static Dissipative
• Corner Radius End Mill: 0.035″ Dia, 0.105″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2245MC
• Disposable Gloves: Size X-Large, 6.3 mil, Nitrile White, 12″ Length, Static Dissipative
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Boring Bar: 0.087″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Disposable Gloves: Size X-Large, 6.3 mil, Nitrile White, 12″ Length, Static Dissipative
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• TIG Torch Parts & Accessories; Type: Gas Hose; Hose Type: Gas; Length (Feet): 25.0; For Use With: 18; For Use With: 18; PSC Code: 3438; For Use With: 18; Type: Gas Hose
• Boring Bar: 0.12″ Min Bore, 5/8″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• ER25 Spanner Wrench For Use with ER Mini Nuts
• Strip: Buna-N Rubber, 2″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2429MC
• Taper Length Drill Bit: 0.3320″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Tap Collet: ANSI 1, 0.141″ M1.6 & M3.5 Tap
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• Disposable Gloves: Size Large, 6.3 mil, Nitrile White, 12″ Length, Static Dissipative
• Taper Length Drill Bit: 0.3091″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ink Cartridge: Black Cyan Magenta & Yellow Use with Epson WorkForce WF-2630, WF-2650, WF-2660 & Expression XP-420
• Corner Radius End Mill: 1/8″ Dia, 1″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.037″ Dia, 0.111″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Plastic Sheet: Garolite, 1/8″ Thick, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Replacement 0.5 GPM Clack ™ Flow Control Use with Acorn Air-Trol Valves
• Tap Collet: ANSI 1 M4 Tap
• Taper Length Drill Bit: 0.3386″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Corner Radius End Mill: 1/8″ Dia, 1″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 105.0; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3937; Insert Compatibility: DCMW215 ™; DCG
• Corner Radius End Mill: 1/8″ Dia, 1″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.034″ Dia, 0.102″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3937; Insert Compatibility: DCMW325 ™; DCG
• Indexable Turning Toolholders; Hand of Holder: Neutral; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 72.5; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3937; Insert Compatibility: VBET22 ™; VBGW22
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 95.0; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3937; Insert Compatibility: CCGT215 ™; CCGW
• Gasket Tapes; Thickness (Decimal Inch): 0.1970; Width (Inch): 1/2; Color: White; Material: Compressible ePTFE; Length (Feet): 25; Material Grade: Standard; PSC Code: 5330; Maximum Temperature (F): 500; Minimum Temperature (F): -450; Material: Compressible
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3937; Insert Compatibility: DCMW215 ™; DCGW
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Collet Chuck: 0.5 to 10 mm Capacity, ER Collet, 22 mm Shank Dia, Straight Shank 100 mm Projection, 0.003 mm TIR, Through Coolant
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 36' Long x 24' Wide, 5 mil Polyethylene, Rectangle
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Size 4XL Black High Visibility Sweatshirt 60-62″ Chest, Fleece, Zipper Closure, 2 Pockets
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 36' Long x 24' Wide, 5 mil Polyethylene, Rectangle
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Corner Radius End Mill: 1/8″ Dia, 1″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 36' Long x 24' Wide, 5 mil Polyethylene, Rectangle
• Sanding Sponges; Double-sided: Yes; Grade: Medium; Material: Foam; Number of Sides: 2; Sponge Color: Maroon
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Plastic Sheet: Acetal, 1/4″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Sanding Sponges; Double-sided: Yes; Grade: Fine; Material: Foam; Number of Sides: 2; Sponge Color: Maroon
• Corner Radius End Mill: 0.035″ Dia, 0.105″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Thread Forming Tap: DIN 2174, 7GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Universal Size, Gray, Underneath Hard Hat Winter Liner Shoulder Cape Length,
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Hard Hat: Heat Protection, Full Brim, Class C, 4-Point Suspension White, Polyethylene, Vented, Slotted
• Thread Forming Tap: 5/16-18, DIN 2184-1, 2BX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Metering Pump Accessories; Type: Liquid End Preventative Maintenance Kit; Accessory Type: Liquid End Preventative Maintenance Kit; For Use With: LMI High Viscosity Liquid Ends for 636xx; For Use With: LMI High Viscosity Liquid Ends for 636xx