Products

• Strip: Neoprene Rubber, 6″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• ER: ER16, 6 mm 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Strip: Neoprene Rubber, 4″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• ER: ER32, 2.5 mm 40mm OAL, 33mm Overall Diam, 0.0004″ TIR
• ER: ER16, 0.1875″ 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Ball End Mill: 0.125″ Dia, 0.875″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• ER20 Spanner Wrench For Use with ER Mini High-Speed Nuts
• ER: ER16, 4 mm 27.5mm OAL, 17mm Overall Diam, 0.0004″ TIR
• Corner Radius End Mill: 0.1″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Welded Bandsaw Blade: 12' 6″ Long, 1/2″ Wide, 0.025″ Thick, 10 TPI Carbon Steel, Toothed Edge
• ER: ER16, 0.375″ 27.5mm OAL, 17mm Overall Diam, 0.0004″ TIR
• Corner Radius End Mill: 0.078″ Dia, 13/32″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• CNMG542-PR 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 5/8″ Inscribed Circle, 0.0313″ Corner Radius, 1/4″ Thick, 80° Triangle
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Turning Insert: CNGA432-X-25S-4SC , Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Beer Clean Glass Cleaner, 4 Lb, Manual, 2/CT
• Polyurethane Tube: 0.063″ ID x 1/8″ OD, 100' Long 250 Max psi, -40 to 165 ° F, Red
• Single Profile Thread Mill: M3-0.50, 51 to 51 TPI, Internal & External, 4 Flutes, Solid Carbide 2.3″ Cut Dia, 3″ Shank Dia, 38″ OAL, Bright/Uncoated
• Indexable Cutoff Toolholder: 0.9″ Max Depth of Cut, 1.8″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Turning Insert: CNGA432-X-15S-4SC , Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Single Profile Thread Mill: M2-0.40, 64 to 64 TPI, Internal & External, 2 Flutes, Solid Carbide 1.5″ Cut Dia, 3″ Shank Dia, 38″ OAL, Bright/Uncoated
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Cable Support Grips; Cable Support Grip Type: Single Loop Support Grip; Maximum Cable Diameter (Decimal Inch): 1.7400 in; Overall Length: 29 in; Overall Diameter: 1.7400 in; Breaking Strength: 1610 lb; Mesh Length: 17 in; Overall Length (Decimal Inch): 29
• Plastic Bar: Acetal, 3/32″ Thick, Black Rockwell M-90
• Reduced Shank Drill Bit: 1-1/4'' Dia, 1/2'' Shank Dia, 118 ™, High Speed Steel 6'' OAL, 3'' Flute Length, Coated Finish, Straight-Cylindrical Shank, RH Cut
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Indexable Cutoff Toolholder: 0.7″ Max Depth of Cut, 1.4″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Hex Nut: 9/16-12, Grade 9 Steel, Zinc-Plated Clear Chromate Right Hand Thread, 7/8″ Across Flats, ANSI & ASME B18.2.2
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Indexable Cutoff Toolholder: 0.9″ Max Depth of Cut, 1.8″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 50 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM4F
• Polytetrafluroethylene Film Tape: 3/4″ Wide, 5 yd Long, 10 mil Thick 60 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Boring Bar: 2.5 mm Min Bore, 8 mm Max Depth, Right Hand Cut, Carbide 2 mm Shank Dia, 32 mm OAL, 0.15 mm Corner Radius
• Boring Bar: 2.5 mm Min Bore, 8 mm Max Depth, Right Hand Cut, Carbide 2 mm Shank Dia, 32 mm OAL, 0.05 mm Corner Radius
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1″ Wide x 6″ Long x 1/8″ Thick
• Indexable Boring Bar: S16HSVNR12N, 0.85 mm Min Bore, 16.00 mm Shank Dia, N/A Steel Screw, Uses VNBR ™, VNBTR ™, VNGR ™, VNFGR ™ & VNTR ™ Inserts
• Boring Bar: 2.5 mm Min Bore, 8 mm Max Depth, Right Hand Cut, Carbide 2 mm Shank Dia, 32 mm OAL, 0.15 mm Corner Radius
• Hex Head Cap Screw: 7/8-9 x 8″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Boring Bar: 2.5 mm Min Bore, 8 mm Max Depth, Right Hand Cut, Carbide 2 mm Shank Dia, 32 mm OAL, 0.08 mm Corner Radius
• Electric Water Heaters; Style: SmartHome Mini Tank Water Heater; Voltage: 110-120 V; Wire Gauge: 8; Temperature Rise: 140 ™F @ 1.5 GPM; Kilowatts: 1.44; Tank Capacity (Gal.): 2.50; Diameter/Width (Inch): 10.75; Amperage Rating: 12; Phase: Single Phase; De
• Replaceable Tip Drill: 13.5 to 13.9 mm Drill Dia, 91 mm Max Depth, 14 mm Straight-Cylindrical Shank Uses DMP Inserts, 169.15 mm OAL, Through Coolant
• Lumber; Thickness: 2; Width: 4; Length Ft.: 16; Wood Type: Southern Yellow Pine; Treated: KDHTPT
• Scrub & Scouring Brushes; Type: Food Service Brush; Bristle Material: Polyester; Brush Width: 5.5; Resistance Features: Oil Resistant; Water Resistant; Block/Handle Material: Plastic; Color: Yellow; Bristle Type: Stiff; Brush Area Width (Inch): 5.5; Brist
• Replaceable Tip Drill: 14 to 14.4 mm Drill Dia, 94 mm Max Depth, 16 mm Straight-Cylindrical Shank Uses DMP Inserts, 178.18 mm OAL, Through Coolant
• Polyethylene Film Tape: 2″ Wide, 5 yd Long, 9.8 mil Thick 15 Lb/In Tensile Strength, Rubber Adhesive, 20 to 170 ° F
• Scrub & Scouring Brushes; Type: Food Service Brush; Bristle Material: Polyester; Brush Width: 5.5; Resistance Features: Oil Resistant; Water Resistant; Block/Handle Material: Plastic; Color: Blue; Bristle Type: Stiff; Brush Area Width (Inch): 5.5; Bristle
• Replaceable Tip Drill: 12.5 to 12.9 mm Drill Dia, 84 mm Max Depth, 14 mm Straight-Cylindrical Shank Uses DMP Inserts, 161.09 mm OAL, Through Coolant
• Pushbutton Control Stations; Control Station Type: Control Station; Number of Operators: 1; Legend Markings: No Legend; Switch Action: Push; Mounting Type: Flush Mount
• Scrub & Scouring Brushes; Type: Food Service Brush; Bristle Material: Polyester; Brush Width: 5.5; Resistance Features: Chemical Resistant; Oil Resistant; Acid Resistant; Water Resistant; Block/Handle Material: Plastic; Color: Green; Bristle Type: Stiff;
• Arc Flash & Flame Protection Gloves; Protection Type: Arc Flash; Maximum Arc Flash Protection (cal/Sq. cm): 61.4 cal/cm ™; Hand: Paired; Lining Material: Unlined; Size: X-Large; PSC Code: 4240; Maximum Arc Flash Protection Rating: 61.4 cal/cm ™
• Replaceable Tip Drill: 13 to 13.4 mm Drill Dia, 88 mm Max Depth, 14 mm Straight-Cylindrical Shank Uses DMP Inserts, 166.24 mm OAL, Through Coolant
• Pushbutton Control Stations; Control Station Type: Control Station; Number of Operators: 1; Legend Markings: No Legend; Switch Action: Push; Mounting Type: Surface Mount
• Bolt & Screw Extractors; Tool Type: Screw Extractor; Extractor Size: #10; Extractor Size: #10; Number of Pieces: 1.000; Overall Length (Inch): 5; Screw Size: #10; Small End Diameter (Inch): 1.25; For Use With: Broken Tap or Drill; For Use With: Broken Tap
• Scrub & Scouring Brushes; Type: Food Service Brush; Bristle Material: Polyester; Brush Width: 5.5; Resistance Features: Oil Resistant; Water Resistant; Block/Handle Material: Plastic; Color: White; Bristle Type: Stiff; Brush Area Width (Inch): 5.5; Bristl
• Hex Head Cap Screw: 7/8-9 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Scrub & Scouring Brushes; Type: Food Service Brush; Bristle Material: Polyester; Brush Width: 5.5; Resistance Features: Oil Resistant; Water Resistant; Block/Handle Material: Plastic; Color: Red; Bristle Type: Stiff; Brush Area Width (Inch): 5.5; Bristle
• Welded Bandsaw Blade: 13' 5″ Long, 1-1/4″ Wide, 0.042″ Thick, 1.14H TPI Carbon Steel, Toothed Edge
• Welded Bandsaw Blade: 13' 2″ Long, 1-1/4″ Wide, 0.042″ Thick, 1.14H TPI Carbon Steel, Toothed Edge
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Pressure Washer Accessories; For Use With: Pressure Washer; Material: Plastic; Material: Plastic; Material: Plastic
• Coolant Hose Adapters, Connectors & Sockets; Type: Adapter; Connection Type: None; Body Material: Acetal Copolymer; Product Type: Adapter
• Thread Forming Tap: DIN 2174, 6GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Thread Forming Tap: DIN 2174, 7GX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Turning Insert
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Wall Clocks; Type: 24 Hour Wall Clock; Display Type: Analog; Power Source: (1) AA Battery; Face Color: White/Gray; Case Color: Brown; EPP Indicators: Biodegradable; Pre Consumer Recycled Content : 0; Total Recycled Content: 0; Post Consumer Recycled Conte
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 3.5 to 5, High Speed Steel, TiN Finish Series TC410
• Die Drill Bit: 0.3480″ Dia, 135 °, Solid Carbide Bright Finish, 1″ Flute Length, 2-1/2″ OAL
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Wire & Cable Stripper Accessories; Type: Replacement Blade; Maximum Wire Gage: 19 mm; For Use With: FOR-3000
• Wipes
• Wheel Chocks; Wheel Chock Type: Wheel Chock; Base Tread: Grooved; Width (Inch): 10; Height (Inch): 6; Construction: Molded; Depth (Inch): 10; Surface Tread: Grooved; Material: Rubber
• Ball End Mill: 0.034″ Dia, 0.102″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Packing; Material: PTFE; Size: 1/2; Spool Length: 5; Color: White; Maximum Working Pressure (psi): 1000; 1000.0 psi; PSC Code: 5330; Color: White; Material: PTFE; Maximum Working Pressure: 1000.0 psi; Material: PTFE
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Masking Tape: 96 mm Wide, 55 m Long, 6.7 mil Thick, Tan Kraft Paper, Rubber Adhesive, 40 lb/in Tensile Strength
• Ball End Mill: 0.032″ Dia, 0.048″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.109″ Dia, 0.327″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Welded Bandsaw Blade: 14' 5″ Long, 1-1/4″ Wide, 0.042″ Thick, 1.14H TPI Carbon Steel, Toothed Edge
• Single Profile Thread Mill: 5/16-18 to 5/16-48, 18 to 48 TPI, Internal & External, 4 Flutes, Solid Carbide 0.24″ Cut Dia, 1″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Tapcon next generation technology with star drive increases productivity by maintaining drive engagement during installation. Star drive eliminates bit slip for 3/16″ Star Flat Head Tapcon. Tapcon Concrete Anchors Blue Climaseal
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Ball Grip Quick-Release Pin: T-Handle, 1/2″ Pin Dia, 1-1/4″ Usable Length 2.69″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Fall Protection Harnesses: 400 Lb, Vest Style, Size 2X-Large, Polyester Pass-Through Leg Strap, Friction Shoulder Strap, Quick-Connect Chest Strap
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Ball Grip Quick-Release Pin: T-Handle, 1/2″ Pin Dia, 1-1/2″ Usable Length 2.94″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Dish Detergent; Form: Liquid; Container Type: Bottle; Container Size (Gal.): 1.00; Scent: Original; For Use With: Manual Pot, Pan Dish Detergent
• Die Drill Bit: 0.2660″ Dia, 140 °, Solid Carbide Bright Finish, 1-1/2″ Flute, 2-11/16″ OAL, Series 470
• Plastic Sheet: Polytetrafluoroethylene, 3/16″ Thick, White, 3,500 psi Tensile Strength Shore D-55
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Gasket Tapes; Thickness: 1/16; Width (Inch): 1; Color: Black; Material: Vinyl Foam; Length (Feet): 5 yd; Material: Vinyl Foam
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Hand Tube Cutter: 1/4 to 2-5/8″ Tube 7″ OAL, Cuts Copper, Aluminum & Brass
• Corner Radius End Mill: 0.1″ Dia, 0.15″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Plastic Sheet: Polyvinylchloride, 1/8″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD103; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Corner Radius End Mill: 0.109″ Dia, 0.164″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Hard Hat: Electrical Protection, Impact Resistant & Water Resistant, Front Brim, Class E, 4-Point Suspension White, Polyethylene, Slotted
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Corner Radius End Mill: 0.093″ Dia, 0.279″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 63.546 mm; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• Corner Radius End Mill: 0.078″ Dia, 15/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Ball Grip Quick-Release Pin: T-Handle, 5/16″ Pin Dia, 3″ Usable Length 4-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Corner Radius End Mill: 1/8″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• Air & Fabric Odor Eliminator Air & Fabric Odor Eliminator
• Corner Radius End Mill: 0.07″ Dia, 0.105″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End
• GreenLink RTU Glass Cleaner Environmentally Friendly Ready-To-Use Glass Cleaner
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.003″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• #4-40, 2.0619″ OAL, 1/4″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 1-7/8″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Black 90 ° Elbow: 2 x 1-1/2″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• #10 Screw 1-3/8″ OAL 0.192″ ID x 5/8″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Sign: Rectangle, ″Notice, COVER YOUR COUGH. AVISO CUBRETE AL TOSER″ Plastic, 14″ High, 10″ Wide
• Corner Radius End Mill: 0.0197″ Dia, 0.0276″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Plastic Sheet: Garolite, 3/16″ Thick, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.3125; Drill Bit Size (Inch): 0.3125; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 1.5000; Overall Length (Decimal I
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Electrostatic Air Filter 1 Gal Jug
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Corner Radius End Mill: 5/64″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.08″ Dia, 0.12″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 37 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Indexable High-Feed End Mill: 3/8″ Cut Dia, 3/8″ Weldon Flat Shank Uses 2 SDXS Inserts, 0.024″ Max Depth, 2.92″ OAL, Through Coolant
• Pipe Fitting: 2″ Fitting, 316 Stainless Steel 150 psi
• ADHT1204PER-G88 WXN15 Carbide Milling Insert TiCN Plus Finish, 0.5354″ Long x 0.1874″ Thick x 0.3307″ Wide
• Rollstick: 1/32″ Thick, 120″ Long, Black Polyurethane Backing
• Collet Chuck: ER Collet, Taper Shank 60 mm Projection, Through Coolant
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: VB..22.; Toolholder Style: SVJBR; Rake: Positive; Rake Angle: 5; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Width (mm): 12.00; Shank
• Combination Drill & Reamers; Reamer Size (mm): #8; 0.1990; Reamer Size (Decimal Inch): 0.1990; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch): 6; Spiral Direction: R
• Combination Drill & Reamers; Reamer Size (mm): #9; 0.1960; Reamer Size (Decimal Inch): 0.1960; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch): 6; Spiral Direction: R
• Combination Drill & Reamers; Reamer Size (mm): #10; 0.1935; Reamer Size (Decimal Inch): 0.1935; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch): 6; Spiral Direction:
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: BT..22.; Toolholder Style: SVXCR; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 53.0; Insert Holding Method: Screw; Shank Width (Decimal Inch):
• Closed Cell Polyethylene Foam: 24″ Wide, 24″ Long, Gray Acrylic Adhesive Backing
• Welded Bandsaw Blade: 19' 7″ Long, 1″ Wide, 0.035″ Thick, 3 TPI Carbon Steel, Toothed Edge
• Floor Cleaner: Bottle, Use On Floors Hard Floor Care
• Grooving Insert: GCM6004ML AC5015S, Solid Carbide Absotech Finish, Neutral, 6 mm Cutting Width, 25 mm Max Depth, Series GND
• Plastic Bar: Acetal, 1-1/4″ Thick, Black Rockwell M-90
• Corner Radius End Mill: 0.065″ Dia, 0.195″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.087″ Groove Width
• TIG Welding Torches; Torch Type: Air Cooled; Material: Silicon Rubber; Length (Feet): 0.4; Body Material: Silicone Rubber; Gas Valve Included: Yes; PSC Code: 3438; Type: Air Cooled; Type: Air Cooled
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Grooving Tool: Full Radius Solid Carbide, 3/8″ Shank Dia, 0.039″ Groove Width
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.003″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Grooving Tool: Full Radius Solid Carbide, 3/8″ Shank Dia, 0.055″ Groove Width
• Traffic Cone & Barricade Accessories; Type: Base; Width (Decimal Inch): 14.5000; Material: Recycled Rubber; Color: Black; Weight (Lb.): 30.0000; For Use With: 42 in & 28 in Navicade Traffic Channelizing Cone; Watchtower Stacker Cone; Additional Informatio
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.002″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Tool: Full Radius Solid Carbide, 3/8″ Shank Dia, 0.046″ Groove Width
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Black Tee: 2 x 2 x 1/2″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Hex Nut: 5/8-18, Grade 9 Steel, Zinc-Plated Clear Chromate Right Hand Thread, 15/16″ Across Flats, ANSI & ASME B18.2.2
• 400 Grit Silicon Carbide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Corded Belt & Straight Sander: 1/4″ Belt Length, 1/4″ Belt Width 2A, 120V, Rear Exhaust
• Ball End Mill: 0.0236″ Dia, 0.0354″ LOC, 2 Flute, Solid Carbide 37.5 mm OAL, 3 mm Shank Dia, 20 ° Helix, Uncoated, Single End
• Replacement 0.7 GPM Clack ™ Flow Control Use with Acorn Air-Trol Valves
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Ball End Mill: 0.025″ Dia, 0.038″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Ball Grip Quick-Release Pin: T-Handle, 7/16″ Pin Dia, 6″ Usable Length 7.34″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 2″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 581
• Brass Pipe Branch Tee: 3/8″ Fitting, Threaded, FNPT x FNPT x MNPT FNPT x MNPT x FMNT Ends, 2,200 psi, Brass Finish, Class Instrumentation
• 900 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• 320 Grit Silicon Carbide Rectangular Polishing Stone Coarse/Medium Grade, 1/4″ Wide x 4″ Long x 1/8″ Thick
• DOT Conspicuity Tape; Color: White; Tape Material: Reflective Sheeting; Width (Inch): 6; Length (Feet): 15
• 800 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Electrical Enclosure Panels; Panel Type: Back; For Box Size (H x W): 16 x 14; Finish: Powder Coated; For Use With: Non-Metallic Enclosures 16x14; Finish/Coating: Powder Coated
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Orange; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Orange; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Plastic Bar: Polytetrafluoroethylene, 3/16″ Thick, White
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Blue; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Blue; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SAP-NB
• Sheet: Silicone Rubber, 12″ Wide, 36″ Long, Semi-Clear Durometer 40, Plain Backing
• Anti-Fatigue Modular Tile Mat: Dry & Wet Environment, 36″ Length, 3″ Wide, 5/8″ Thick, Yellow Nitrile Rubber Base, Ribbed, Series 578, ASTM F1677
• Barrier Rope & Chain; Type: Safety Barrier Chain; Material: Plastic; Color: Safety Green; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Safety Green; Length (Feet): 100.00; 100.000; Overall Length: 100.00
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• Folding Gates & Barricades; Type: Crowd Control Parade Barricade; Height (Inch): 42; Max Width (Inch): 21; Material: Plastic; Color: White; Additional Information: Comes with Powder Coated Steel Feet & Legs; Sign Size: 29.5 in W x 26 in H x 3/16 in THK; S
• Single Profile Thread Mill: 4-40 to 4-48, 40 to 48 TPI, Internal & External, 2 Flutes, Solid Carbide 0.08″ Cut Dia, 3″ Shank Dia, 2″ OAL, AlTiN Coated
• Folding Gates & Barricades; Type: Crowd Control Parade Barricade; Height (Inch): 42; Max Width (Inch): 21; Material: Plastic; Color: Orange; Additional Information: Comes with Powder Coated Steel Feet & Legs; Sign Size: 29.5 in W x 26 in H x 3/16 in THK;
• Replaceable Drill Tips; Diameter (mm): 33.00; Tip Material: Solid Carbide; Manufacturer Grade: Carbide; Series: HT 800 WP; Insert Seat Size: 32; Height (mm): 21.90; Insert Holding Method: Screw; Coolant Through: No; Point Type: Faceted; Applications: Cons
• Wrenches For Indexables; Wrench Type: Lock Screw Wrench; Indexable Tool Type: Toolholder; Drive Type: Slotted; Toolholder Style Compatibility: C4-CT-01; Hardware Compatibility: Coolant Supply Unit; Overall Length: 4.92; Tool Material: Steel; Series: C4; T
• Ball Grip Quick-Release Pin: T-Handle, 10 mm Pin Dia, 80 mm Usable Length 116.8 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Replaceable Drill Tips; Diameter (mm): 34.00; Tip Material: Solid Carbide; Manufacturer Grade: Carbide; Series: HT 800 WP; Insert Seat Size: 32; Height (mm): 22.00; Insert Holding Method: Screw; Coolant Through: No; Point Type: Faceted; Applications: Cons
• Polyester, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Ball Grip Quick-Release Pin: T-Handle, 8 mm Pin Dia, 90 mm Usable Length 122.3 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Polyester, Medium-Duty Smooth Surface, 100″ OAL, 3″ Wide
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Closed Cell EPDM Foam: 36″ Wide, 36″ Long, Black Plain Backing
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Taper Length Drill Bit: 0.5469″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• 6″ Dia, 120 Grit, Ceramic Aluminum Oxide C-Weighted, Paper Backing
• #4-40, 1.062″ OAL, 3/16″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 7/8″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 316, Passivated
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 25 mm Usable Length 80.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Combo Drill & Countersink: #8, 3/4″ Body Dia, 60 ™, High Speed Steel 5/16″ Point Dia, 5/16″ Point Length, 3-1/2″ OAL
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 20 mm Usable Length 75.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• 2-1/2″ OAL, 3/8″ Head Diam, 3 Flute, 100° Incl Angle, Integral Pilot, Adjustable Stop Countersink 1/4-28 Straight Threaded Shank, 1-3/4″ Shank Len, 3/16″ Shank Diam, 5/16″ Pilot Diam, High Speed Steel
• Plastic Sheet: Acetal, 1/2″ Thick, White Rockwell M-90
• 2-1/2″ OAL, 3/8″ Head Diam, 2 Flute, 100° Incl Angle, Integral Pilot, Adjustable Stop Countersink 1/4-28 Straight Threaded Shank, 1-3/4″ Shank Len, 3/16″ Shank Diam, 5/16″ Pilot Diam, High Speed Steel
• Single Profile Thread Mill: #0-80, 80 to 80 TPI, Internal, 1 Flute, Solid Carbide 0.045″ Cut Dia, 1/8″ Shank Dia, TiN-T21 Coated
• #4-40, 1.562″ OAL, 1/4″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-3/8″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 316, Passivated
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 7.20; Groove Width (mm): 2.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 61.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 30.00; Projection (mm): 3.450; Ma
• 2-1/2″ OAL, 3/8″ Head Diam, 2 Flute, 100° Incl Angle, Integral Pilot, Adjustable Stop Countersink 1/4-28 Straight Threaded Shank, 1-3/4″ Shank Len, 3/16″ Shank Diam, 7/32″ Pilot Diam, High Speed Steel
• Grooving Tool: LH Cut, Face Solid Carbide
• M5x0.8, 60.53mm OAL, 10mm Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 51mm Body Length, 9.53mm Thread Length, 12.7mm Thread Depth, Grade 303, Uncoated
• Grooving Tool: LH Cut, Face Solid Carbide
• Lawn Sprinklers; Type: Sprinkler; Thread Size: 3/4; Base Style: Sled; Travelling Sprinkler: No; Spray Pattern: Circular; Description: Impact
• Single Profile Thread Mill: 0-80, 80 to 80 TPI, Internal & External, 3 Flutes, Solid Carbide 0.044″ Cut Dia, 1/8″ Shank Dia, 1.5″ OAL, AlTiN Nano Coated
• Square End Mill: 7/64'' Dia, 0.327'' LOC, 1/8'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• Micro Drill Bit: 0.1043″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Closed Cell Neoprene Foam: 12″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Self-Retracting Fall Limiter: 35' Line
• Micro Drill Bit: 0.1004″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Hex Head Cap Screw: 5/16-18 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• 320 Grit Silicon Carbide Square Polishing Stone Extra Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Laser Printer: Black Use with Oki C710 Series, C711 Series
• Micro Drill Bit: 0.1024″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Hex Head Cap Screw: 1/2-20 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Square End Mill: 0.1'' Dia, 0.15'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, RH Cut, RH Flute
• 400 Grit Silicon Carbide Square Polishing Stone Super Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Micro Drill Bit: 0.1063″ Dia, 130 °, Solid Carbide TiAlN Finish, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 1/16'' Dia, 0.18'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/4″ Wide x 6″ Long x 1/8″ Thick
• Wire Shelf with Split Sleeves: Use with Wire Shelves