Products

• Flap Disc: 5/8-11 Hole, 80 Grit, Aluminum Oxide, Type 27 Coated, Fiber-Backed, 8,500 RPM
• Silicone Tube: 7/8″ OD, 10' Length 40 Max psi, Clear
• Spade Drill Insert: 20 mm Dia, Series 1 AM300 Finish, Series 1
• Shipping & DOT Label: ″This End Up″, Rectangle, 4″ Wide, 8″ High Paper
• Spade Drill Insert: 47/64″ Dia, Series 1 AM300 Finish, Series 1
• Die Drill Bit: 0.3580″ Dia, 135 °, Solid Carbide Bright Finish, 1″ Flute Length, 2-1/2″ OAL
• Hose Reel Accessories; For Use With: 80000 Latching System; For Use With: 80000 Latching System
• 320 Grit Silicon Carbide Rectangular Polishing Stone Extra Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• 120° 1-1/2″ OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 0.141″ Flute Length, 1/8″ Shank Diam
• Spade Drill Insert: 0.9592″ Dia, Series 1 AM300 Finish, Series 1
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 16.2 mm OD, 10 mm Stroke, M12 x 1 Thread 68 mm OAL, 9.8 lb Force
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 16.2 mm OD, 10 mm Stroke, M12 x 1 Thread 68 mm OAL, 9.8 lb Force
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 1/64″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Boring Bar: 0.08″ Min Bore, 0.15″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Corner Radius End Mill: 3/8″ Dia, 3/4″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Boring Bar: 0.08″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Corner Radius End Mill: 3/8″ Dia, 3/4″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 40 ° Helix, EXO Coated, Corner Radius End, Series VGM5
• Boring Bar: 0.08″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Boring Bar: 0.08″ Min Bore, 0.6″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Boring Bar: 0.09″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Taper Length Drill Bit: 0.3622″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Boring Bar: 0.09″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Taper Length Drill Bit: 0.3661″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Half-Round & Spade Drill Bits; Drill Bit Type: Aircraft Dagger Drill; Drill Bit Size (Decimal Inch): 0.3125; Drill Bit Size (Inch): 5/16; Drill Point Angle: 120; Drill Bit Material: Solid Carbide; Overall Length (Decimal Inch): 4; Overall Length (Inch): 4
• Boring Bar: 0.122″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Black Reducing Coupling: 1 x 3/8″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Boring Bar: 0.122″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Hex Head Cap Screw: 7/8-14 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated
• M10x1.5 Coarse 20mm Long Hex Thread Cutting Screw 12L14 Steel, Hex Washer Head, Self Drilling Point, Zinc-Plated
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Boring Bar: 0.122″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.004″ Corner Radius
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Boring Bar: 0.11″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Die Drill Bit: 0.3307″ Dia, 135 °, Solid Carbide Coated, Series 200
• Boring Bar: 0.11″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Die Drill Bit: 0.3897″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Boring Bar: 0.1″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• Boring Bar: 0.1″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Extra Length Drill Bit: 0.1654″ Dia, 130 °, Cobalt Uncoated, Parabolic Flute, Straight-Cylindrical Shank, Series 619
• Visual Signal Device Accessories; Signal Device Accessory Type: Wall Mount; Overall Length (Decimal Inch): Various; Overall Width/Diameter (Inch): 0.5; Overall Height (Decimal Inch): 0.5; For Use With: PAWS; Overall Height (Inch): 0.5
• Square End Mill: 0.039'' Dia, 0.117'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, TiB2 Finish, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Extra Length Drill Bit: 0.2165″ Dia, 130 °, Cobalt Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 619
• Automotive Winch Accessories; Length (Feet): 30; End Type: Eye & Eye; Length (Feet): 30
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, TiB2 Finish, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Single Profile Thread Mill: 0-80, 80 to 80 TPI, Internal & External, 2 Flutes, Solid Carbide 0.044″ Cut Dia, 1/8″ Shank Dia, 1.5″ OAL, AlTiN Coated
• Square End Mill: 7/64'' Dia, 7/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 60, Acrylic Adhesive Backing
• RH SDJC 0° (Axial), 0° (Radial)° Positive Rake Indexable Turning Toolholder 93° Lead Angle, 5/8″ x 5/8″ Shank, Takes Multiple Inserts
• 90° 0.045″ Diam 1-1/2″ OAL 2-Flute Solid Carbide Spotting Drill AlTiN Finish, 0.068″ Flute Length, 1/8″ Shank Diam
• Square End Mill: 0.039'' Dia, 0.117'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Plastic Sheet: Garolite, 5/8″ Thick, Brown, 10,000 psi Tensile Strength Rockwell M-100
• Spiral Point Tap: M4 x 0.7, Metric, 2 Flutes, Plug, 6H, Powdered Metal High Speed Steel, Uncoated 13 mm Thread Length, 63 mm OAL, Right Hand, Series CoroTap 200
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Spiral Point Tap: M4 x 0.7, Metric, 2 Flutes, Plug, 6H, High Speed Steel, Uncoated 12 mm Thread Length, 63 mm OAL, Right Hand, Series CoroTap 200
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Chucking Reamer: 0.0452″ Dia, 1-1/2″ OAL, 3/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• 24 oz Bottle Liquid Bathroom Cleaner Unscented Scent, Disinfectant, General Purpose Cleaner
• Roll: Neoprene Rubber, 12″ Wide, Black Durometer 60, Plain Backing
• Sheet: Buna-N Rubber, 24″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• General Purpose Limit Switches; Actuator Type: Roller Lever; Voltage: 500 V (IEC); 240.00; 300 V (UL); Actuation Force: 0.10; Contact Form: 1NO/1NC; Switch Type: Limit; Contact Configuration: NO; NC; Switch Action: Springs Back (Momentary); Terminal Type:
• Disc Backing Pad: 5″ Dia, Disc Backing Pad & Quick-Change 5/8-11 Thread, 12,200 Max RPM
• Plastic Sheet: Acetal, 1/8″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Hex Head Cap Screw: 5/16-24 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Hex Head Cap Screw: 1-8 x 7-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Live Center: Morse Taper Shank 1,540 lb Workpiece Weight, 6,300 Max RPM, Extended Point
• Ball Grip Quick-Release Pin: T-Handle, 5/16″ Pin Dia, 5″ Usable Length 6-1/4″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Dish Detergent; Form: Liquid; Container Type: Bottle; Container Size (oz.): 28.00; Scent: Orange; For Use With: Ultra Antibacterial Liquid
• Standard Manual Ball Valve: 3/4″ Pipe, Full Port, Stainless Steel 2-Way Flow & In-Line, Female NPT, 2,000 psi WOG
• Hydraulic Tool Chuck: Taper Shank, 20 mm Hole 64.5 mm Projection, 39.25 mm Nose Dia, Through Coolant
• Tool & Cutter Grinding Wheels; Wheel Type: Cup Wheel; Wheel Diameter (Inch): 7 in; Abrasive Material: Diamond; Grade: Super Fine; Grit: 0; Maximum Rpm: 8730.000; Face Width (Inch): 0.5 in; Hole Thread Size: 5/8-11
• Hydraulic Tool Chuck: Taper Shank 39.25 mm Nose Dia, Through Coolant
• Lockout Tag: Rectangle, 1.5″ High, Polystyrene, ″None″ English
• Black Hex Bushing: 3-1/2 x 3″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Hex Head Cap Screw: 1/4-20 x 2-1/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Industrial Pipe Fitting: 2 x 2 x 1/2″ Female Thread, Female NPT Leaded Brass
• Adapter Back Plate for 8″ Diam Self Centering Lathe Chucks L-0 Mount, 2.6″ Through Hole Diam, 7.91″ OD, 0.71″ Flange Height, Cast Iron
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Straight-Flute & Die Drill Bits
• Combination Drill & Reamers; Reamer Size (mm): 8; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.3150; Series: UDM5P2AC; Tool Performance: High Performance; Included Angle: 118.00; Flute
• Hex Head Cap Screw: 3/8-24 x 5″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Combination Drill & Reamers; Reamer Size (mm): 8; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.3150; Series: UDM5P2AB; Tool Performance: High Performance; Included Angle: 118.00; Flute
• Stitched Deluxe Job Ticket Holders, 9″ x 12″, Black, 15/Case
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Deluxe Job Ticket Holders with Strap, 9″ x 12', Red, 15/Case
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Combination Drill & Reamers; Reamer Size (mm): 0.2500; Reamer Size (Decimal Inch): 0.2500; Reamer Size (Inch): 1/4; Reamer Material: Solid Carbide; Reamer Finish/Coating: Uncoated; Flute Length (Inch): 1-1/2; Shank Type: Straight; Overall Length (Inch): 6
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• Single Point Theading Tool: Internal, Solid Carbide 60 ° Profile
• KTFSS06800FEGM Carbide Replaceable Tip Drill AlTiN Finish, 180° Included Angle, 6.8mm Diam, Through Coolant, Series KenTIP FS
• All-Purpose Cleaner: 1 gal Bottle Liquid, Pleasant Scent
• Jackets & Coats; Garment Style: Jacket; Size: Medium; Material: Cotton; Closure Type: Button; Flame Retardant: Yes; Number Of Pockets: 1.000; Flame Resistant: Yes
• ER: ER32, 12 mm 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• Shower, Tub & Tile Cleaner Shower, Tub & Tile Cleaner
• Jackets & Coats; Garment Style: Jacket; Size: Large; Material: Cotton; Closure Type: Button; Flame Retardant: Yes; Number Of Pockets: 1.000; Flame Resistant: Yes
• Spraluster Hard surface cleaner
• Tap Collet: ER16, 7 mm M7 Tap
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0; For Use With: LB; LC; LS; LG
• Jackets & Coats; Garment Style: Jacket; Size: X-Large; Material: Cotton; Closure Type: Button; Flame Retardant: Yes; Number Of Pockets: 1.000; Flame Resistant: Yes
• Tap Collet: ER16, 0.168″ #8 to 5/32″ Tap
• Tap Collet: ER16, 0.141″ #0 to 1/8″ Tap
• Tap Collet: ER16, 0.255″ 1/4″ Tap
• 3/4″ Head Diam, 1/2″ Shank Diam, 6 Flute 82° High Speed Steel Countersink Bright Finish, 2-5/8″ OAL, Single End, Straight Shank, Right Hand Cut
• ER: ER32, 8 mm 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• ER: ER32, 0.75″ 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• Big John II Portable toilet deodorant non-formaldehyde
• Tap Collet: ER16, 6 mm M6 Tap
• ER: ER32, 0.5934″ 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• ER: ER32, 0.4375″ 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• ER: ER32, 0.5625″ 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• ER: ER32, 10 mm 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• Sanitary Butterfly Manual Ball Valve: Standard Port
• ER: ER32, 0.5″ 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• ER: ER32, 0.6563″ 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• Die Drill Bit: 0.3543″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Coiled & Self Storing Hose: 3/8″ ID, 15' Long, MNPT (Swivel) x MNPT (Swivel) 135 Max psi, Blue
• Plastic Bar: Polycarbonate, 1/2″ Thick, Clear
• #7 Pin 0.3297″ Small End/0.422″ Large End Spiral Flute High Speed Steel Taper Pin Reamer Uncoated, 4-7/16″ Flute Length, 6-5/16″ OAL, 6 Flutes, 13/32″ Diam Straight-Cylindrical Shank, LH Spiral, RH Cut
• Tap Collet: ER16, 7.1 mm M7.1 Tap
• Indexable Insert Drills; Drill Style: TBM; Maximum Drill Diameter (mm): 14.00; Maximum Drill Depth (mm): 31.50; Shank Type: Flatted; Shank Diameter (Inch): 16; Shank Diameter (mm): 16.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximum
• Tap Collet: ER16, 0.194″ #9 to 3/16″ Tap
• Floor Cleaner: 1 gal Bottle, Use on Vinyl, Stone, Concrete & Wood Hard Floor Care
• Indexable Insert Drills; Drill Style: TBM; Maximum Drill Diameter (mm): 14.00; Maximum Drill Depth (mm): 31.50; Shank Type: Flatted; Shank Diameter (Inch): 16; Shank Diameter (mm): 16.00; Number of Drill Inserts: 1; Cutting Direction: Left Hand; Maximum D
• Tap Collet: ER16, 3.5 mm M3.5 Tap
• ER: ER32, 18 mm 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Left Hand Cut, Series 582
• Hand Cleaning Wipes: Pack, White
• ER: ER32, 15 mm 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• Taper Length Drill Bit: 0.2500″ Dia, 130 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 668
• ER: ER32, 9 mm 40mm OAL, 33mm Overall Diam, 0.0002″ TIR
• Taper Shank Drill Bit: 0.502″ Dia, 1MT, 118 °, High Speed Steel Oxide Finish, 5.2756″ Flute Length, 8.4646″ OAL, Cone Relief Point, Spiral Flute
• Single Profile Thread Mill: #6-32 to #6-40, 32 to 40 TPI, Internal & External, 4 Flutes, Solid Carbide 0.098″ Cut Dia, 3/16″ Shank Dia, 2″ OAL, AlTiN Nano Coated
• Taper Length Drill Bit: 0.2441″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Adhesive, Graffiti & Rust Removers; Type: Adhesive Remover; Container Type: Mini Cylinder; Remover Type: Adhesive Remover
• Tap Collet: ER16, 8 mm M8 Tap
• Taper Length Drill Bit: 0.2480″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Nylon Tube: 11/64″ ID, 1/4″ OD, 250' Long 500 Max psi, Blue
• Hard Hat: Class E, 4-Point Suspension Red, Polyethylene, Vented, Slotted
• Tap Collet: ER16, 4 mm M4 Tap
• 3/8″ Screw 3/8″ OAL 0.38″ ID x 3/4″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Step Drill Bits; Tool Material: High Speed Steel; Shank Type: Hex Shank; Hole Diameter: 1-3/8 in; Series: 15 Steps; Overall Length (Inch): 2-29/32; Minimum Hole Diameter (Inch): 7/8; Maximum Hole Diameter (Inch): 1-3/8; Shank Diameter (Decimal Inch): 3/8;
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 35' Long x 20' Wide, 5 mil Polyethylene, Rectangle
• Line Fishing System Kits & Components; Component Type: Glow Rod Kit; Includes: (6) 18 x 3/16″ Glow Rods; Bullet Nose Attachment Head w/Eyelet; Reusable Storage Tube; Overall Length (Feet): 9
• Plastic Bar: Acetal, 1/2″ Thick, White
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 0.7″ Max Depth of Cut, 1.4″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• 150 Grit Aluminum Oxide Rectangular Polishing Stone Coarse Grade, 1/2″ Wide x 6″ Long x 1/16″ Thick
• Indexable Cutoff Toolholder: 0.7″ Max Depth of Cut, 1.4″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• 220 Grit Aluminum Oxide Rectangular Polishing Stone Coarse/Medium Grade, 1/2″ Wide x 6″ Long x 1/16″ Thick
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Anti-Fatigue Mat: 3' Length, 9/16″ Thick, SBR Rubber Diamond Plate, Black, Dry
• High Visibility Vest: Large Yellow, Zipper Closure, No Pocket
• All-Purpose Cleaner: 32 gal Trigger Sprayer Liquid, Floral Scent
• Indexable Cutoff Toolholder: 0.7″ Max Depth of Cut, 1.4″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 30' Long x 30' Wide, 5 mil Polyethylene, Rectangle
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Single Pole Plugs & Connectors; Connector Type: Male; End Style: Male; Termination Method: Threaded Stud; Amperage: 400 A; Voltage: 600 V; NEMA Rating: 3R, 4X, 12; Voltage: 600 V; Amperage: 400 A
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Right Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Hex Head Cap Screw: 3/4-10 x 8-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Taper Length Drill Bit: 0.2598″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Gloves: Size M, Goatskin Brown, Smooth Grip
• Heavy Duty Glass Cleaner Heavy Duty Glass Cleaner
• Plastic Sheet: Ultem Polyetherimide, 1/4″ Thick, Amber Rockwell M-109
• Indexable Cutoff Toolholder: 12 mm Max Depth of Cut, 24 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Shower, Tub & Tile Cleaner Shower, Tub & Tile Cleaner
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Taper Length Drill Bit: 0.2756″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Indexable Cutoff Toolholder: 20 mm Max Depth of Cut, 40 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 80, Plain Backing
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• Milling Insert: ROHX 1630R8-FM4 CTPK226, CTPK226, Solid Carbide N/A Finish, 1.0000″ OAW
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• 220 Grit Aluminum Oxide Rectangular Polishing Stone Coarse/Medium Grade, 1/4″ Wide x 6″ Long x 1/8″ Thick
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Traffic Cone & Barricade Accessories; Accessory Type: Barricade Light; Recycled Content: 0; Height (Inch): 15.75; Height (Decimal Inch): 15.75; Material: Plastic; Tape Length (Feet): 7.00; For Use With: Barricade Lighting; Length (Inch): 7.00; Type: Barri
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Boring Bar: 0.12″ Min Bore, 0.6″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL
• Ball End Mill: 0.125″ Dia, 0.5″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, TiB2 Coated, Single End
• 150 Grit Aluminum Oxide Rectangular Polishing Stone Coarse Grade, 1/4″ Wide x 6″ Long x 1/8″ Thick
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• British Standard Pipe Tap: 1/4-19 BSPP, Modified Bottoming Chamfer, 4 Flutes High Speed Steel, TiAlN Finish, Series MTS
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Corner Radius End Mill: 0.06″ Dia, 5/16″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Shim for Indexables: Drilling Head 10-950 Shim, Negative, Neutral
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Corner Radius End Mill: 0.078″ Dia, 13/32″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Shim for Indexables: Drilling Head 10-950 Shim, Negative, Neutral
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Corner Radius End Mill: 0.05″ Dia, 1/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Shim for Indexables: Drilling Head 10-950 Shim, Negative, Neutral
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Corner Radius End Mill: 0.047″ Dia, 1/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• ER: ER16, 0.125″ 0.02 TIR, 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Indexable Cutoff Toolholder: 20 mm Max Depth of Cut, 40 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• ER: ER16, 0.3937″ 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Cable Tools & Kits; Number of Pieces: 3.0; Number Of Pieces: 3.0; For Use With: Slam Key LB 8 Point Star; P Key; Slam Key LS 5 Point Star; Includes: SSK-716; SSK-85; SSK-90; Contents: SSK-716; SSK-85; SSK-90
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Black Reducing Coupling: 2-1/2 x 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• ER: ER16, 8 mm 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Corner Radius End Mill: 0.062″ Dia, 5/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Hex Head Cap Screw: 1-8 x 2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Corner Radius End Mill: 0.078″ Dia, 13/32″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• ER: ER16, 0.375″ 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• End Brushes
• Indexable Cutoff Toolholder: 12 mm Max Depth of Cut, 24 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Drill Mill: 3/8″ LOC, 3 Flutes, 90 ° Point, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Uncoated
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Drill Mill: 3 Flutes, 90 ° Point, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Uncoated
• Corner Radius End Mill: 0.062″ Dia, 5/16″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Corner Radius End Mill: 7/64″ Dia, 0.57″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Indexable Cutoff Toolholder: 18 mm Max Depth of Cut, 36 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Square End Mill: 0.05'' Dia, 0.3'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• ER: ER16, 0.4063″ 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Right Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• Square End Mill: 0.055'' Dia, 0.385'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Single Profile Thread Mill: M6 x 1.00, Internal & External, 5 Flutes, Solid Carbide 4.8″ Cut Dia, 6″ Shank Dia, 1.9685″ OAL, AlTiN Nano Coated
• Indexable Cutoff Toolholder: 25 mm Max Depth of Cut, 50 mm Max Workpiece Dia, Left Hand 32 mm Shank Height, 32 mm Shank Width, Uses GCMN Inserts, Series GND
• ER: ER16, 0.2188″ 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Drill Mill: 1/8″ Dia, 1/2″ LOC, 3 Flutes, 120 ° Point, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Uncoated
• Floor Science Cleaner & Restorer Spray Buff: 1 gal Bottle, Use on Asphalt Tile, Ceramic, Granite, Linoleum, Quarry Tile, Rubber, Slate, Terrazzo & Vinyl Tile
• Square End Mill: 1/32'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• ER: ER16, 0.125″ 27.5mm OAL, 17mm Overall Diam, 0.0004″ TIR
• Indexable Cutoff Toolholder: 0.7″ Max Depth of Cut, 1.4″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Square End Mill: 3/64'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Drill Mill: 1/8″ Dia, 1/2″ LOC, 3 Flutes, 60 ° Point, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Uncoated
• Ball Grip Quick-Release Pin: T-Handle, 12 mm Pin Dia, 100 mm Usable Length 136.8 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Indexable Cutoff Toolholder: 0.7″ Max Depth of Cut, 1.4″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2199MC
• Square End Mill: 3/16'' Dia, 9/16'' LOC, 3/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 38 ° Variable Helix, Centercutting, RH Cut, RH Flute
• ER: ER16, 7 mm 27.5mm OAL, 17mm Overall Diam, 0.0002″ TIR
• Indexable Cutoff Toolholder: 1″ Max Depth of Cut, 2″ Max Workpiece Dia, Left Hand 1-1/4″ Shank Height, 1-1/4″ Shank Width, Uses GCMN Inserts, Series GND