Products

• Spade Drill Insert: 1.307″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 19/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Duct Tape: 2″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Plastic Sheet: Acetal, 1/2″ Thick, White Rockwell M-90
• Spade Drill Insert: 1.2519″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 1-9/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5039″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Multipurpose Lubricants & Penetrants; Food Grade: No; Composition Family: Penetrant; Lubricant Base: Petroleum Distillates; Voc Compliant: Yes; Composition: Petroleum Based
• Brass Pipe Coupling: 2-1/2″ Fitting, Threaded, FNPT x FNPT, Class 125, Lead Free
• Acidic Toilet Bowl Cleaner Toilet Bowl Cleaner
• Spade Drill Insert: 1.311″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 0.5314″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Milling Tip Inserts; Milling Tip Type: Center Drill; Tool Material: Carbide; Manufacturer Grade: Submicron; Insert Hand: Right Hand; Chipbreaker: No; Series: Haimer Mill; Coating Process: PVD; Number Of Flutes: 2
• Spade Drill Insert: 1.2834″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Black Hex Bushing: 4 x 3-1/2″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Spade Drill Insert: 0.559″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 0
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width
• Spade Drill Insert: 1.2559″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Spade Drill Insert: 1-5/16″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Concentrated Outdoor Glass & Surface Cleaner Glass & Surface Cleaner
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Widt
• Spade Drill Insert: 1.3385″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Spade Drill Insert: 1.3425″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Laydown Threading Inserts; Insert Style: 22ER; Insert Size Code: 22; Insert Material: Solid Carbide; Manufacturer Grade: PR1115; Thread Type: External; Pitch (mm): 5.00; Thread Standard: Metric; Insert Hand: Right Hand; Included Angle: 60; Series: 22ER; C
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Spade Drill Insert: 1.3149″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Spade Drill Insert: 1.2874″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Vinyl, Heavy-Duty Smooth Surface, 5″ OAL, 5″ Wide
• Boring Bar: 0.16″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Spade Drill Insert: 1-11/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Wire Shelf with Split Sleeves: Use with Wire Shelves
• Spade Drill Insert: 1.3464″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Boring Bar: 0.16″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Cut & Puncture-Resistant Gloves: Size L, ANSI Cut A5, ANSI Puncture 5 White & Gray
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 2.5025 in; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Abrasive Belt: 1/4" Wide, 20-1/2" OAL, 120 Grit, Zirconia Alumina
• Spade Drill Insert: 1.3188″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Boring Bar: 0.16″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 63.546 mm; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• Spade Drill Insert: 1.2913″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Abrasive Belt: 1/4" Wide, 20-1/2" OAL, 60 Grit, Zirconia Alumina
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 63.546 mm; Inside Diameter (mm): 50 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatib
• Boring Bar: 9/64″ Min Bore, 1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Spade Drill Insert: 1.3779″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Abrasive Belt: 1/4" Wide, 18" OAL, 120 Grit, Zirconia Alumina
• Spade Drill Insert: 1.3503″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Boring Bar: 0.16″ Min Bore, 0.9″ Max Depth, Left Hand Cut, Solid Carbide 3/16″ Shank Dia, 2″ OAL, 0.006″ Corner Radius
• Sheet: Buna-N Rubber, 12″ Wide, 12″ Long, Black Durometer 90, Plain Backing
• Safety Label: Rectangle, 3″ Wide, 5″ High Polyester
• Spade Drill Insert: 1.2952″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Straight-Flute & Die Drill Bits
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spade Drill Insert: 1.3228″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Tarp/Dust Cover: Black & Green, Rectangle, Polyethylene, 20' Long x 20' Wide, 10 mil Polyethylene, Rectangle
• Spade Drill Insert: 1.3543″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Square End Mill: 0.075'' Dia, 0.113'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Tarp/Dust Cover: Silver & Black, Rectangle, Polyethylene, 20' Long x 20' Wide, 10 mil Polyethylene, Rectangle
• Spade Drill Insert: 1.3267″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Square End Mill: 0.025'' Dia, 0.038'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Spade Drill Insert: 1.3582″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• #12, Hex Washer Head, Hex Drive, 1-1/2″ Length Under Head, #3 Point, Self Drilling Screw Alloy Steel
• Spade Drill Insert: 1.3307″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Square End Mill: 1/4'' Dia, 1/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Taper Length Drill Bit: 0.3580″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Spade Drill Insert: 1.3346″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Square End Mill: 3/32'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Spade Drill Insert: 1.3622″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Taper Length Drill Bit: 0.3281″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Spade Drill Insert: 1.3661″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Abrasive Belt: 1/4" Wide, 18" OAL, 80 Grit, Zirconia Alumina
• Extra Length Drill Bit: 0.2677″ Dia, 130 °, High Speed Steel Uncoated, 6.102″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Micro Drill Bit: 0.0055″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Spade Drill Insert: 63/64″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 2
• Plastic Sheet: Garolite, 1/16″ Thick, Black, 16,000 psi Tensile Strength Rockwell M-100
• Abrasive Belt: 1/4" Wide, 18" OAL, 60 Grit, Zirconia Alumina
• Micro Drill Bit: 0.0051″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• All-Purpose Cleaner: 32 gal Trigger Spray Bottle, Disinfectant Liquid, Lemon Scent
• Registers & Diffusers; Type: Air Deflector Vent Cover; Style: Linear 1 Way; Material: Plastic; Length (Decimal Inch): 48 in; Height (Inch): 2-3/4; Width (Decimal Inch): 48 in; Additional Information: Fits Diffusers: 2-3/4″ to 4-3/4″; PSC Code: 5120; Mater
• Micro Drill Bit: 0.0047″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Table Top Tape Dispensers; Style: Single Roll; Mount Type: Table/Desk; Tape Width: 3/4; Tape Core Diameter: 1
• Micro Drill Bit: 0.0043″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Ball End Mill: 0.2362″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide Uncoated
• Taper Length Drill Bit: 0.3583″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Guhring GS222.0032.147.03.02.N.IK 32.00mm Coolant Thru Cut-Off Blade
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Micro Drill Bit: 0.0039″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Taper Length Drill Bit: 0.3465″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Plastic Bar: Acetal, 1/8″ Thick, Black Rockwell M-90
• Micro Drill Bit: 0.0035″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Micro Drill Bit: 0.0032″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 3/16'' Dia, 3/4'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Plastic Bar: Acetal, 1/8″ Thick, White
• Square End Mill: 3/16'' Dia, 1'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Micro Drill Bit: 0.0028″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Grooving Tool: LH Cut, Face Solid Carbide
• Spiral Point Tap: 5/8-11, UNC, 3 Flutes, Plug, 2B/3B, High Speed Steel, Steam Oxide Finish 1-13/16″ Thread Length, 3-13/16″ OAL, Right Hand, H3, Series 751
• Micro Drill Bit: 0.0024″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Abrasive Belt: 1/4" Wide, 18" OAL, 60 Grit, Zirconia Alumina
• Micro Drill Bit: 0.002″ Dia, 130 °, Solid Carbide Bright/Uncoated, 1.4961″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 462
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Grooving Tool: Retaining Ring Solid Carbide, 5/16″ Shank Dia, 0.062″ Groove Width
• Square End Mill: 1/4'' Dia, 3/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.6719″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Tool: Retaining Ring Solid Carbide, 5/16″ Shank Dia, 0.062″ Groove Width
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Plastic Sheet: Acetal, 2″ Thick, 6″ Long, Black, 8,500 psi Tensile Strength Rockwell M-90
• Corner Radius End Mill Head: 3/16″ Dia, 3/8″ LOC, 4 Flutes Solid Carbide, AlTiN Coated, Series XP-NB
• Plastic Sheet: High Density Polyethylene, 1/16″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Plastic Rod: Acetal, 1' Long, 3″ Dia, Black Rockwell M-90
• Die Drill Bit: 0.3661″ Dia, 135 °, Solid Carbide Coated, Series 200
• Rail Mount Kits & Parts; Type: Rail Base
• Fixed Blade Knives; Blade Length (Inch): 3; Blade Type: High Carbon Stainless; Blade Material: Japanese Steel; Handle Material: Santoprene; Polypropylene; Overall Length (Inch): 7.56; Color: Blue; Knife Type: Paring Knife; Minimum Order Quantity: Japanese
• ER: ER40, 0.748″
• Closed Cell Neoprene Foam: 4″ Wide, 120″ Long, Black Acrylic Adhesive Backing
• ER: ER40, 0.669″
• Strip: Silicone Rubber, 6″ Wide, 36″ Long, Red Durometer 70, Plain Backing
• ER: ER40, 0.197″
• Extra Length Drill Bit: 0.2008″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 503
• Angle & Disc Grinder Accessories
• Extra Length Drill Bit: 0.2047″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 503
• Spot Welder Tips; Tip Type: Double Bend Tip D Nose (Offset); Material: RWMA Class 3 - C18000; Type: Double Bend Tip D Nose (Offset)
• 400 Grit Aluminum Oxide Round Polishing Stone Medium Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick
• 400 Grit Silicon Carbide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• Hex Head Cap Screw: 5/16-18 x 3-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Pillowcase 36″ Wide x 42″ Long
• Deep Groove Ball Bearing: 72 mm OD Bearing Number SS6207
• Extra Length Drill Bit: 0.2795″ Dia, 130 °, High Speed Steel Uncoated, 6.102″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 502
• Micro Drill Bit: 0.0492″ Dia, 140 °, Solid Carbide TiAlN Finish, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 6400
• Plastic Bar: Polytetrafluoroethylene, 3/32″ Thick, White
• Abrasive Belt: 1/4" Wide, 18" OAL, 40 Grit, Zirconia Alumina
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: SSTH; Rake: Positive; Rake Angle: 0; Multi-use Tool: Yes; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Width (Decimal Inch): 0.3750; Shank Width (Inch): 3/8; Insert Compa
• Coffee, Tea & Accessories; Creamer Type: Liquid; Container Size: 32 oz; Flavor: French Vanilla; For Use With: Coffee; Breakroom Accessory Type: Liquid; Breakroom Accessory Description: French Vanilla; For Use With: Coffee
• 5C Collet: 2″, Step Steel
• Black Tee: 1-1/2 x 1 x 1″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Traffic Barrels, Delineators & Posts; Type: Traffic Drum; Material: HDPE; Reflective: Yes; Base Needed: Yes; Height (Inch): 39.7; Width (Inch): 23-1/2; Additional Information: Sub Brand: Commander ™; Sheeting Grade: Engineer; Rubber Base Sold Separately;
• Die Drill Bit: 23/64″ Dia, 135 °, Solid Carbide ALtima Finish, 1″ Flute Length, 2-1/2″ OAL
• Plastic Sheet: Polycarbonate, 1/4″ Thick, Clear Rockwell R-120
• Grooving Tool: Internal Solid Carbide
• Parts Washer Flow-Through Brush Synthetic Bristles, 2-1/2″ Bristle Length, 10″ Long x 4″ Wide x 1-1/4″ High, For Use with Parts Cleaners
• Hex Head Cap Screw: M16 x 2.00 x 140 mm, Grade 316 & Austenitic Grade A4 Stainless Steel, Uncoated Partially Threaded, 24 mm Hex, DIN 931
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Plastic Sheet: Polyvinylchloride, 1/2″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Overboots, Overshoes & Spats; Footwear Style: Safety Toe; Overshoe; Toe Type: Steel; Height (Inch): 18; Men's Size: Large; Women's Size: X-Large; Sole Type: PVC; Upper Material: Steel Toe; Color: Green; FootwearType: Safety Toe; Overshoe
• Single Profile Thread Mill: 1/2-12 to 1/2-32, 12 to 32 TPI, Internal & External, 4 Flutes, Brazed Solid Carbide 1/4″ Shank Dia, 2.6″ OAL, Bright/Uncoated
• Grooving Tool: Internal Solid Carbide
• Electrical Outlet Boxes & Switch Boxes; Enclosure Type: Portable Outlet; Enclosure Shape: Rectangle; Weather Resistance: Weather-Resistant; Overall Height (Decimal Inch): 147.10 mm; 5.7900 in; Overall Height (mm): 147.10; Overall Width: 70.40 mm; 2.7700 i
• Overboots, Overshoes & Spats; Footwear Style: Safety Toe; Overshoe; Toe Type: Steel; Height (Inch): 18; Men's Size: Small; Women's Size: Medium; Sole Type: PVC; Upper Material: Steel Toe; Color: White; FootwearType: Safety Toe; Overshoe
• Grooving Tool: Internal Solid Carbide
• Black Companion Flange: 1-1/2 x 5″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Indexable Insert Drills; Drill Style: TBM; Maximum Drill Diameter (mm): 12.00; Maximum Drill Depth (mm): 27.00; Shank Type: Flatted; Shank Diameter (Inch): 16; Shank Diameter (mm): 16.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximum
• Overboots, Overshoes & Spats; Footwear Style: Safety Toe; Overshoe; Toe Type: Steel; Height (Inch): 18; Men's Size: Medium; Women's Size: Large; Sole Type: PVC; Upper Material: Steel Toe; Color: Red; FootwearType: Safety Toe; Overshoe
• Grooving Tool: Internal Solid Carbide
• Pipe Socks & Dewatering Bags; Application: Leak Absorbent; Length (Feet): 1.67 ft; Width (Feet): 1.46 ft; Diameter (Inch): 3 in; Applications: Leak Absorbent; Overall Length: 1.67 ft
• Cutter Replacement Parts; Type: Replacement Cutting Blade; Replacement Blade; Cuts Material Type: PEX; PVC; For Use With: Milwaukee 1-5/8 in. Ratcheting Pipe Cutter (48-22-4210); Cutting Depth: 1-5/8; Cutting Diameter: 1-5/8; Replacement Part Type: Replac
• Indexable Insert Drills; Drill Style: TBM; Maximum Drill Diameter (mm): 12.00; Maximum Drill Depth (mm): 27.00; Shank Type: Flatted; Shank Diameter (Inch): 16; Shank Diameter (mm): 16.00; Number of Drill Inserts: 1; Cutting Direction: Left Hand; Maximum D
• Rail Mount Kits & Parts; Type: Toe Board
• Grooving Tool: Internal Solid Carbide
• Fuel Transfer Pumps; GPM: 4.00; Hose Diameter: 5/8; Inlet Size: 2-1/8; Outlet Size: 0.62; Hose Length (Feet): 9.80; 9.8 ft; Voltage: 12 V; 12V; Description: 12 Volt DC Submersible Diesel Pump; Material: Polyethylene; Polypropylene; Stainless Steel; Polyur
• Grooving Tool: Internal Solid Carbide
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 0.7518 in; Inside Diameter (mm): 13 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Grooving Tool: Internal Solid Carbide
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 0.7518 in; Inside Diameter (mm): 13 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Indexable Grooving Cartridges; Cutting Direction: Left Hand; Insert Style: EG0400M04P04
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 19.04 mm; Inside Diameter (mm): 13 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibili
• Grooving Tool: Internal Solid Carbide
• Single Profile Thread Mill: #10-24 to #10-56, 24 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.135″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Indexable Grooving Cartridges; Cutting Direction: Right Hand; Insert Style: EG0500M05P04
• Single Profile Thread Mill: #12-24 to #12-56, 24 to 56 TPI, Internal & External, 4 Flutes, Solid Carbide 0.16″ Cut Dia, 1/4″ Shank Dia, 2.5″ OAL, AlTiN Coated
• Face Shield Windows & Screens: Face Shield Window, Clear, 9″ High, 0.08″ Thick Hard Hats, ANSI Z87.1
• Grooving Tool: Internal Solid Carbide
• Single Profile Thread Mill: 0-80, 80 to 80 TPI, Internal & External, 2 Flutes, Solid Carbide 0.044″ Cut Dia, 1/8″ Shank Dia, 1.5″ OAL, Bright/Uncoated
• Indexable Grooving Cartridges; Cutting Direction: Left Hand; Insert Style: EG0500M05P04
• Sorbent: 20 lb Drum, Application Use In Garbage Collection Trucks, Around Dumpsters & Refuse Cans Granular Deodorant/Absorbent
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 4″ Thick, 6″ Long, White, 4,250 psi Tensile Strength Shore D-70
• Grooving Tool: Internal Solid Carbide
• Black Floor Flange: 1-1/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Indexable Grooving Cartridges; Cutting Direction: Right Hand; Insert Style: EG0500M05P04
• Streak-Free Glass Cleaner Streak-Free Glass Cleaner
• Indexable Grooving Cartridges; Cutting Direction: Left Hand; Insert Style: EG0400M04P04
• Grooving Tool: Internal Solid Carbide
• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Indexable Grooving Cartridges; Cutting Direction: Left Hand; Insert Style: EG0500M05P04
• Indexable Grooving Toolholder: FLASL-1616M3, Uses 3 Inserts, No
• Grooving Tool: Internal Solid Carbide
• Ball Grip Quick-Release Pin: T-Handle, 1/2″ Pin Dia, 3/4″ Usable Length 2.19″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Indexable Grooving Toolholder: FLASR-1616M3, Uses 3 Inserts, No
• Indexable Grooving Cartridges; Cutting Direction: Left Hand; Insert Style: EG0500M05P04
• Ball Grip Quick-Release Pin: T-Handle, 1/2″ Pin Dia, 1″ Usable Length 2.44″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Grooving Tool: Internal Solid Carbide
• Laydown Threading Inserts; Insert Style: 22ER; Insert Size Code: 22; Insert Material: Solid Carbide; Manufacturer Grade: PR1115; Thread Type: External; Pitch (mm): 5.00; Thread Standard: Trapez; Insert Hand: Right Hand; Included Angle: 30; Series: 22ER; C
• Indexable Grooving Cartridges; Cutting Direction: Left Hand; Insert Style: EG0500M05P04
• Abrasive Belt: 1/4" Wide, 12" OAL, 150 Grit, Zirconia Alumina
• MIG Welder Wire Liner: 0.109 to 0.125″ Wire Dia, 25' Long
• KTFSS15900HPGM KCP15A Carbide Replaceable Tip Drill AlTiN Finish, 143 deg Included Angle, 15.9mm Diam, Series KTFS
• Rotary & Multi-Tools; Product Type: Oscillating Multi-Tool; Batteries Included: No; Oscillation Per Minute: 20000; Oscillation Per Minute: 20000; Battery Chemistry: Lithium-ion; For Use With: LXT Batteries & StarLock Accessories
• Abrasive Belt: 1/4" Wide, 12" OAL, 120 Grit, Zirconia Alumina
• Shim Stock: 0.625'' Thick, 3'' Long, 3″ Wide, Stainless Steel
• 3D Printer Consumables
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Polyurethane Tube: 1/4″ ID x 3/8″ OD, 100' Long 170 Max psi, -40 to 165 ° F, Red
• Push-to-Connect Tube Fitting: 1/2″ Thread Stainless Steel, 290 psi
• Spade Drill Insert: 0.9409″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Gate Latches
• Extra Length Drill Bit: 0.2008″ Dia, 130 °, High Speed Steel Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 524
• Spade Drill Insert: 7/8″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• 3D Printer Consumables
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0; For Use With: HC-625; HSC-625
• Spade Drill Insert: 0.8188″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Extra Length Drill Bit: 0.2126″ Dia, 130 °, High Speed Steel Uncoated, Parabolic Flute, Straight-Cylindrical Shank, Series 524
• Gate Latches
• 3D Printer Consumables
• Spade Drill Insert: 0.8464″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Traffic Barricades; Type: Type I & II; Barricade Height (Inch): 45; Material: Plastic; Barricade Width (Inch): 25; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: White; Weight (Lb.): 16.0000; Top Panel Height (Inch): 12; Top Panel Width (Inch)
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0; For Use With: HC-50; HSC-50
• Thread Forming STI Taps; Thread Size (mm): #4-40 in; Thread Size (Inch): #4-40 in; #4-40; Thread Limit: H3; Class of Fit: 2B; Chamfer: Semi-Bottoming; Finish/Coating: TiCN; Threads Per Inch: 40; Overall Length (Inch): 2.205 in; Thread Standard: UNC; Threa
• 3D Printer Consumables
• Spade Drill Insert: 0.874″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0; For Use With: HC-75; HSC-75
• Traffic Barricades; Type: Type I & II; Barricade Height (Inch): 45; Material: Plastic; Barricade Width (Inch): 25; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: Orange; Weight (Lb.): 16.0000; Top Panel Height (Inch): 12; Top Panel Width (Inch
• Spade Drill Insert: 29/32″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Traffic Barricades; Type: Type I & II; Barricade Height (Inch): 45; Material: Plastic; Barricade Width (Inch): 25; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: Yellow; Weight (Lb.): 16.0000; Top Panel Height (Inch): 12; Top Panel Width (Inch
• Strip: Neoprene Rubber, 4″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Toner Cartridge: Black Use with HP Laserjet Enterprise 600 M602DN, M602N, M602X, M603DN, M603N, M603XH & Laserjet Enterprise M4555 MFP
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spade Drill Insert: 0.8228″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Spade Drill Insert: 0.8503″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Ball End Mill: 0.08″ Dia, 0.24″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Single End
• Spade Drill Insert: 0.8779″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Strobe & Flashing Lights; Light Type: Revolving; Lens Color: Clear; Lamp Type: LED; Mounting Type: Magnetic; NEMA Rating: 6; Voltage: All IQv Batteries; Recommended Environment: Industrial; Flashes Per Minute: 60
• Spade Drill Insert: 0.9055″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, White Durometer 60, Plain Backing
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Spade Drill Insert: 0.8543″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Rotary & Multi-Tools; Product Type: Oscillating Multi-Tool; Batteries Included: No; Oscillation Per Minute: 20000; Oscillation Per Minute: 20000; Battery Chemistry: Lithium-ion; For Use With: CXT Batteries
• Ball End Mill: 0.09″ Dia, 0.27″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Single End
• Spade Drill Insert: 0.8818″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Spade Drill Insert: 0.9094″ Dia, Solid Carbide, 132 ° Point AM460 Finish, Series 1
• Ball End Mill: 0.07″ Dia, 0.21″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 45 ° Helix, ZrN Coated, Single End