Products

• Spiral Flute Tap: M5 x 0.80, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Turning Insert: VNGA331SN009DL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Turning Insert: VNGA331SN011DL3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• O-Ring: 1.888″ ID x 2.254″ OD, 0.07″ Thick, Dash 328, Polytetrafluroethylene Round Cross Section
• Turning Insert: VCGT220.5FN_A6 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Turning Insert: VCGW220FN_A6 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0039″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: CNGA431TN015EL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Spiral Point Tap: 4-40, UNC, 2 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 2.205″ OAL, Left Hand, X, Series Rekord B
• Turning Insert: VNGA332FN_L2 CTBH20C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Corner Radius End Mill: 0.078″ Dia, 13/32″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Point Tap: 4-48, UNF, 2 Flutes, 4-5 P, 3B, HSS-E, GLT-1 Finish 2.205″ OAL, Left Hand, X, Series Rekord B
• Turning Insert: VCGT220FN_A6 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0039″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Ball End Mill: 0.1181″ Dia, 0.5906″ LOC, 2 Flute, Solid Carbide 38 mm OAL, 3 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• White Double-Sided Foam Tape: 2″ Wide, 62 mil Thick, Acrylic Adhesive
• Grooving Insert: TDITT K10, Solid Carbide Uncoated, Neutral, 0.236″ Cutting Width, Series TDIT-.00E
• Turning Insert: VNGA332SN014FL2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Turning Insert: CNGA431TN009CL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Adhesive Glue: 20 g Squeeze Bottle 24 hr Full Cure Time
• Corner Radius End Mill: 0.118″ Dia, 5/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: #49, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Turning Insert: VNGA332SN009CL2, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Masking Tape: 1″ Wide, 60 yd Long, 7.3 mil Thick, Tan Crepe Paper, Acrylic Adhesive
• Dark Gray Double-Sided Foam Tape: 1″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Compression Spring: 1.821″ OD, 8″ Free Length 193.546 lb Max Load, 79.98 lb/in Spring Rate, Stainless Steel
• Drill Mill: 1/8″ Dia, 1/2″ LOC, 3 Flutes, 60 ° Point, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Finish
• Turning Insert: CNGA433TN015EL2, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: VNGA332SN011DL2, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Turning Insert: TNMG432SM AH630, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Square End Mill: 3/64'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: TNMG432CM T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Ball End Mill: 0.0984″ Dia, 0.4724″ LOC, 4 Flute, Solid Carbide 38 mm OAL, 3 mm Shank Dia, 30 ° Helix, Uncoated, Single End, Series 140
• Turning Insert: VCGW332FN_A5 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: CNGA432TN009CL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Corner Radius End Mill: 7/64″ Dia, 0.57″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spiral Flute Tap: #6-32, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, Powdered Metal & High Speed Steel, Bright/Uncoated Right Hand Flute, Right Hand Thread, Series CoroTap 300
• Compression Spring: 1.4″ OD, 3.5″ Free Length 0.177″ Wire Dia, 100.823 lb Max Load, 83.3 lb/in Spring Rate, Stainless Steel
• Brackets; Type: Angle Bracket; Length (mm): 50.00; Width (mm): 20.00; Height (mm): 90.0000; Load Capacity (Lb.): 28.000; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• Ball End Mill: 0.25″ Dia, 0.25″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, Uncoated, Single End
• Square End Mill: 0.055'' Dia, 0.385'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.528″ OD, 2.125″ Free Length 0.192″ Wire Dia, 114.994 lb Max Load, 171.689 lb/in Spring Rate, Stainless Steel
• White Double-Sided Foam Tape: 6″ Wide, 36 yd Long, 45 mil Thick, Acrylic Adhesive
• Jobber Length Drill Bit: 0.386″ Dia, 135 °, Cobalt AlTiN Finish, 5.125″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Angle-Adjustable Detent Hinge: Polyoxymethylene, Black Finish
• Square End Mill: 3/64'' Dia, 0.141'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, TiB2 Finish, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/64'' Dia, 0.022'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Drawer Pulls; Handle Diameter: 0.5715; Width (Decimal Inch): 5.4286; Width (mm): 133.00; Length (Inch): 5-1/4; Projection: 1.6; Center to Center: 4-59/64; Thread Size: M5 x 0.8; Finish/Coating: Satin; Material Grade: 303; Additional Information: Thickness
• Jobber Length Drill Bit: 0.397″ Dia, 135 °, Cobalt AlTiN Finish, 5.125″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Square End Mill: 0.05'' Dia, 0.3'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.023'' Dia, 0.035'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Angle-Adjustable Detent Hinge: Polyoxymethylene, White Finish
• Jobber Length Drill Bit: 0.377″ Dia, 135 °, Cobalt AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: TNMG431SS AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Square End Mill: 1/4'' Dia, 1/4'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/32'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Drill Mill: 1/8″ Dia, 1/2″ LOC, 3 Flutes, 120 ° Point, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, AlTiN Finish
• Square End Mill: 0.1181'' Dia, 0.1181'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Jobber Length Drill Bit: 0.189″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: TNMG432SS AH645, Solid Carbide TiAlN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMG
• Engraving Cutter: 300 °, 1/4″ Dia, Pointed Amorphous Diamond Finish, 0.466″ LOC, 1″ Shank, 2-1/2″ OAL, 1 Flute
• Drill Mill: 3/8″ LOC, 3 Flutes, 90 ° Point, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, AlTiN Finish
• Ball End Mill: 0.09″ Dia, 0.135″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Milling Insert: AH8015, Solid Carbide N/A Finish,
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated
• Drill Mill: 3 Flutes, 90 ° Point, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, AlTiN Finish
• Spiral Point Tap: BSP, 3 Flutes, 3 to 5, HSS-E, Steam Oxide Finish 125 mm OAL, Right Hand, Series 5731
• Compression Spring: 1.88″ OD, 8″ Free Length 187.997 lb Max Load, 74.496 lb/in Spring Rate, Stainless Steel
• Kyocera SDKN 42AUTN PR1225 Grade PVD Carbide, Square, Positive Rake Angle, Neutral Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (M) Stainless Steel, (S) Heat-Resistant Alloy, (H) Hardened Materials
• Duct Tape: 2″ Wide, 15 mil Thick, Aluminum Foil Acrylic Adhesive, 126 lb/in Tensile Strength
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.075″ Dia, 0.225″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• White Double-Sided Foam Tape: 1/4″ Wide, 12 yd Long, 62 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/8″ Dia, 0.187″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Chucking Reamer: #48, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Translucent Double-Sided UPVC Tape: 1/2″ Wide, 36 yd Long, 8.5 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Square End Mill: 11mm LOC, 6mm Shank Dia, 60mm OAL, 4 Flutes, Solid Carbide Single End, Duarise Finish, Straight Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 8205
• Corner Radius End Mill: 1/2″ Dia, 1-1/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Milling Insert: AH3225, Solid Carbide N/A Finish,
• Ball End Mill: 0.078″ Dia, 0.234″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/8″ Dia, 0.187″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Square End Mill: 1/64'' Dia, 5/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, RH Cut, RH Flute
• Square End Mill: 1/64'' Dia, 0.022'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.078″ Dia, 0.117″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 0.5512'' Dia, 1.1811'' LOC, 3 Flutes, Solid Carbide Single End, Uncoated, 45 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 1/16'' Dia, 5/16'' LOC, 1/8'' Shank Dia, 2'' OAL, 1 Flute, Solid Carbide Single End, Amorphous Diamond Finish, Upcut Flute, 22 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.075″ Dia, 0.112″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/8″ Dia, 0.187″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.115″ Dia, 0.345″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.12″ Dia, 0.36″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Spiral Point Tap: #6-32, UNC, 2 Flutes, Plug, 2B, High Speed Steel, Bright Finish 3/8″ Thread Length, 2″ OAL, Right Hand, H3, Series SPLS
• Ball End Mill: 0.105″ Dia, 0.158″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.469″ OD, 6.25″ Free Length 0.207″ Wire Dia, 201.95 lb Max Load, 87.287 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.1″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.528″ OD, 7″ Free Length 36.876 lb Max Load, 9.365 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.062″ Dia, 0.186″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• 3/4″ Head Diam, 1/2″ Shank Diam, 82° Cobalt Countersink 2-5/8″ OAL, Single End, Straight Shank, Right Hand Cut
• Compression Spring: 1.175″ OD, 4.25″ Free Length 0.207″ Wire Dia, 176.487 lb Max Load, 202.155 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.1″ Dia, 0.15″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.700; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Serie
• Ball End Mill: 0.09″ Dia, 0.135″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series
• Ball End Mill: 0.11″ Dia, 0.33″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Serie
• Ball End Mill: 0.11″ Dia, 0.33″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 5/16'' Dia, 3/4'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Centercutting, RH Cut, Series SAP
• Ball End Mill: 0.093″ Dia, 0.139″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.07″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Corner Radius End Mill: 0.047″ Dia, 1/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.08″ Dia, 0.24″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.08″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Chucking Reamer: 0.0441″ Dia, 1.9685″ OAL, 0.7087″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Spiral Point Tap: #6-32, UNC, 3 Flutes, Gunnose, 2B, High Speed Steel, TiCN Finish 0.472″ Thread Length, 2.205″ OAL, Right Hand, Series 22217
• Corner Radius End Mill: 0.05″ Dia, 0.15″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.095″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 281
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.015″ Radius, 6 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series SM6F-NB
• Chucking Reamer: 0.0465″ Dia, 1.9685″ OAL, 0.7087″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Corner Radius End Mill: 0.062″ Dia, 5/16″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Combo Drill & Countersink: Metric Bright (Polished) Finish
• Ball End Mill: 0.1562″ Dia, 0.47″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chamfer Mill: 0.25″ Dia, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 0.764″ OD, 8.5″ Free Length 0.098″ Wire Dia, 36.818 lb Max Load, 10.433 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 0.25″ Dia, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, AlTiN Coated
• Compression Spring: 0.588″ OD, 9.5″ Free Length 0.092″ Wire Dia, 39.417 lb Max Load, 12.786 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.047″ Dia, 1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.764″ OD, 6.25″ Free Length 0.112″ Wire Dia, 52.54 lb Max Load, 24.76 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.065″ Dia, 0.097″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.055″ Dia, 0.165″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 5/16″ Dia, 0.47″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 2.056″ OD, 3.5″ Free Length 0.162″ Wire Dia, 55.529 lb Max Load, 30.554 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.1″ Dia, 0.3″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 5/16'' Dia, 1'' LOC, 5/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, DLC Finish, Spiral Flute, 45 ° Helix, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.351″ OD, 7″ Free Length 0.135″ Wire Dia, 50.962 lb Max Load, 15.157 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.351″ OD, 6.25″ Free Length 0.207″ Wire Dia, 217.732 lb Max Load, 106.419 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.115″ Dia, 0.173″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 0.118″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.41″ OD, 2.625″ Free Length 0.177″ Wire Dia, 100.164 lb Max Load, 112.488 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.08″ Dia, 0.12″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.469″ OD, 5.25″ Free Length 0.225″ Wire Dia, 253.533 lb Max Load, 151.846 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.06″ Dia, 5/16″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: 5/64" Dia, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Ball End Mill: 0.015″ Dia, 0.045″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chucking Reamer: #47, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 0.035″ Dia, 0.105″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, VC-10 Finish 1″ Thread Length, 3.14″ OAL, Right Hand, H4, Series 316TI
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, VC-10 Finish 1″ Thread Length, 3.14″ OAL, Right Hand, H3, Series 316TI
• Grooving Insert: TDTT K10, Solid Carbide Uncoated, Neutral, 0.236″ Cutting Width, Series TDT-.00E
• Turning Insert: RNMG 15 06 00 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.3125″ Corner Radius, N/A Series RNMG
• Translucent Double-Sided Rubber Tape: 1/2″ Wide, 32 mil Thick, Rubber Resin Adhesive
• Chucking Reamer: 11/32″ Dia, 6″ OAL, 1-1/2″ Flute Length, Morse Taper Shank, High Speed Steel 6 Flute, RH
• Turning Insert: RNMG 15 06 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3125″ Corner Radius, N/A Series RNMG
• Grooving Insert: TDITT K10, Solid Carbide Uncoated, Neutral, 0.236″ Cutting Width, Series TDIT-.00E
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Spiral Point Tap: 1/4-28, UNF & DIN 371, 3 Flutes, Plug, 2B, HSS-E, TiN Finish 15 mm Thread Length, 80 mm OAL, Right Hand, Series TC216
• O-Ring: 1.62″ ID x 2.19″ OD, 1/4″ Thick, Nitrile Butadiene Rubber Round Cross Section
• Corner Radius End Mill: 1/8″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Ball End Mill: 0.1875″ Dia, 0.312″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Grooving Insert: GMM8030080MW CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 8 mm Cutting Width, 25 mm Max Depth, Series KGM
• Ball End Mill: 0.118″ Dia, 0.354″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Ball End Mill: 0.3125″ Dia, 0.5″ LOC, 4 Flute, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 45 ° Helix, AlTiN Coated, Single End, Series XPB-NB
• Milling Insert: AH725, Solid Carbide N/A Finish,
• Square End Mill: 1/8'' Dia, 1/4'' LOC, 1/4'' Shank Dia, 2'' OAL, 1 Flute, Solid Carbide Single End, Uncoated, Upcut Flute, 22 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.1562″ Dia, 0.281″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• 1/2″ Head Diam, 1/4″ Shank Diam, 1 Flute 120° High Speed Steel Countersink ALtima Blaze Finish, 2″ OAL
• Chamfer Mill: 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, TiB2 Coated
• Compression Spring: 1.998″ OD, 8″ Free Length 0.177″ Wire Dia, 72.19 lb Max Load, 18.287 lb/in Spring Rate, Stainless Steel
• Milling Insert: AH120, Solid Carbide N/A Finish,
• Corner Radius End Mill: 3/16″ Dia, 0.57″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Milling Insert: XDKT 11T308SR-F50 CTCM245, CTCM245, Solid Carbide N/A Finish,
• Milling Insert: XDKT 11T332ER-F40 CTCM245, CTCM245, Solid Carbide N/A Finish,
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Chucking Reamer: 0.0787" Dia, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Square End Mill: 3/64'' Dia, 0.4'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, 50 ° Variable Helix, RH Cut, RH Flute
• Compression Spring: 1.116″ OD, 2.75″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 122.102 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.04'' Dia, 0.325'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Uncoated, 50 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.57″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 0.588″ OD, 7.5″ Free Length 0.105″ Wire Dia, 55.816 lb Max Load, 29.532 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.233″ OD, 4.5″ Free Length 0.207″ Wire Dia, 98.081 lb Max Load, 48.216 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.998″ OD, 3.5″ Free Length 0.162″ Wire Dia, 57.075 lb Max Load, 31.857 lb/in Spring Rate, Stainless Steel
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Compression Spring: 1.528″ OD, 5.25″ Free Length 0.225″ Wire Dia, 244.756 lb Max Load, 138.052 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0197″ Dia, 0.0295″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: QI-NFGF H13A, Solid Carbide Neutral, 0.1051″ Cutting Width, Series CoroCut QI
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: QI-NFGF H13A, Solid Carbide Neutral, 0.1043″ Cutting Width, Series CoroCut QI
• Compression Spring: 2.056″ OD, 5.5″ Free Length 0.192″ Wire Dia, 87.066 lb Max Load, 33.839 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 1/64″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Grooving Insert: QI-NFGF H13A, Solid Carbide Neutral, 0.0969″ Cutting Width, Series CoroCut QI
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Film Tape: 2″ Wide, 36 yd Long, 9 mil Thick, White Polypropylene Film, Silicone Adhesive, 22 lb/in Tensile Strength
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Compression Spring: 1.645″ OD, 6.5″ Free Length 0.177″ Wire Dia, 86.775 lb Max Load, 30.849 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.093″ Dia, 0.139″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Dovetail Cutter: 4 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Dovetail Cutter: 6 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Dovetail Cutter: 1 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Radius End Mill: 3/16″ Dia, 0.57″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• WNMG431MT TT5100 Carbide Turning Insert 0.488″ Long, 1/2″ Inscribed Circle, 1/64″ Corner Radius, 80° Trigon
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 2.200; Material Grade: Submicron; Maximum Bore Depth (mm): 9.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series:
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Dovetail Cutter: 1 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Aluminum Titanium Nitride Finish
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.200; Material Grade: Submicron; Maximum Bore Depth (mm): 6.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series
• Ball End Mill: 0.093″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Dovetail Cutter: 2 °, 3/16″ Cut Dia, 0.285″ Cut Width, Solid Carbide 3/16″ Shank Dia, 1.5″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 1.700; Material Grade: Submicron; Maximum Bore Depth (mm): 6.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series
• Corner Radius End Mill: 4 Flutes, Solid Carbide 30 ° Helix, Super-A Coated, Corner Chamfer End, Centercutting, Series 6716
• Corner Radius End Mill: 1/4″ Dia, 2-1/8″ LOC, 5 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Square End, Centercutting, Series Flash Solid
• 3/4″ Head Diam, 1/2″ Shank Diam, 1 Flute 82° High Speed Steel Countersink TiN Finish, 2-3/4″ OAL
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 1.700; Material Grade: Submicron; Maximum Bore Depth (mm): 9.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series:
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.25″ Dia, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series
• Chucking Reamer: #45, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Ball End Mill: 0.375″ Dia, 1″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Grooving Insert: TQJJ TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.02″ Cutting Width, Series TQJ27
• Turning Insert: WNMG432ML TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.3430″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.700; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Serie
• Ball End Mill: 0.02″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: WNMG432RT TT8125B, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3430″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Serie
• Square End Mill: 9/32'' Dia, 9/16'' LOC, 9/32'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute, Series VGM5
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: WNMG433MT TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.3430″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Trigon, Series WNMG
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 1.700; Material Grade: Submicron; Maximum Bore Depth (mm): 9.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 1.900; Material Grade: Submicron; Maximum Bore Depth (mm): 9.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Series
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 40 ° Helix, AlTiN Coated, Corner Radius End, Series KOR5
• Kyocera BDMT 11T331ERJT PR1210 Grade PVD Carbide, Parallelogram, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (K) Gray Cast Iron, (K) Nodular Cast Iron and (S) Titanium Alloy