Products

• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Jobber Length Drill Bit: 0.4063″ Dia, 118 °, High Speed Steel Bright/Uncoated, 5.25″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: TPGW73YQBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Corner Radius End Mill: 0.0472″ Dia, 0.0709″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Bottoming, 6H Class of Fit, High Speed Steel, TiCN Finish 1.25″ Thread Length, 2.9375″ OAL, Right Hand Flute, Right Hand Thread, D6, Series SFGP
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SM5F
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: TPGA21.50.5QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Combo Drill & Countersink: #6, 1/2″ Body Dia, 118 ™, High Speed Steel Bright (Polished) Finish, 7/32″ Point Dia, 7/32″ Point Length, 3″ OAL, Right Hand Cut, Series 115
• Turning Insert: TPGW731QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: TPGW21.50.5QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Turning Insert: SPGN422 TH10, Solid Carbide Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 90.0 &deg N/A Square, Series SPGN
• Turning Insert: TPGW2.521QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: TPGW32.51QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Corner Radius End Mill: 0.0781″ Dia, 0.117″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Tap Sets; Overall Length (Decimal Inch): 5.1250
• Compression Spring: 2.174″ OD, 8″ Free Length 164.385 lb Max Load, 55.129 lb/in Spring Rate, Stainless Steel
• Turning Insert: TPGW21.51QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGW
• Tap Sets; Overall Length (Decimal Inch): 6.0625
• Square End Mill: 3/8'' Dia, 1-1/4'' LOC, 3/8'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2060
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: TPGA321QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Corner Radius End Mill: 0.03″ Dia, 0.045″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: TPGA322QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Turning Insert: TNMA433 T5105, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 60.0 &deg N/A Triangle, Series TNMA
• Turning Insert: TPGA21.51QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Chucking Reamer: 0.0394" Dia, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Turning Insert: TPGA221QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• O-Ring: 9.734″ ID x 10.012″ OD, 0.139″ Thick, Dash 273, Viton Round Cross Section
• Corner Radius End Mill: 0.0394″ Dia, 0.0591″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Screw Machine Length Drill Bit: 0.1535″ Dia, 140 °, Solid Carbide TiAlN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series R458
• Ball End Mill: 0.3125″ Dia, 2 Flute, Solid Carbide 4″ OAL, 5/16″ Shank Dia, 45 ° Helix, ZrN Coated, Single End, Series 2014
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: TPGA220.5QBN BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 60.0 &deg N/A Triangle, Series TPGA
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: #60, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Kyocera SEKW 422FN KW10 Grade Uncoated Carbide, Square, Positive Rake Angle, Neutral Milling Insert for Roughing in (N) Non-Ferrous Metals and (K) Gray Cast Iron, (K) Nodular Cast Iron
• Slitting & Slotting Saw: 3″ Dia, 5/32″ Thick, 1″ Arbor Hole, 36 Teeth, High Speed Steel Bright/Uncoated, Straight
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Square End Mill: 1/2'' Dia, 1-1/2'' LOC, 1/2'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: #59, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 0.0315″ Dia, 0.0472″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.075″ Dia, 0.113″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 2.291″ OD, 3.5″ Free Length 0.225″ Wire Dia, 119.052 lb Max Load, 83.228 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.1562″ Dia, 0.47″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chucking Reamer: #58, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Compression Spring: 1.351″ OD, 5.25″ Free Length 0.192″ Wire Dia, 128.683 lb Max Load, 80.34 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: #57, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.88″ OD, 2.75″ Free Length 187.997 lb Max Load, 248.319 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.35″ OD, 4.5″ Free Length 0.207″ Wire Dia, 93.425 lb Max Load, 44.423 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: #56, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Double Angle Milling Cutter: 90 °, 3/16″ Cut Dia, 0.095″ Cut Width, 3″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Nano Coated, 6 Teeth
• Corner Radius End Mill: 3/8″ Dia, 0.57″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CCGW21.51FN_A3 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Spiral Point Tap: M8 x 1, Metric, 3 Flutes, Plug, VC-10 Finish 15 mm Thread Length, 90 mm OAL, Right Hand, D5, Series 347TI
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Compression Spring: 1.116″ OD, 5.75″ Free Length 0.177″ Wire Dia, 123.762 lb Max Load, 80.577 lb/in Spring Rate, Stainless Steel
• Brackets; Type: Lever Release; Length (mm): 1076.00; Width (mm): 52.00; Height (mm): 102.0000; Finish/Coating: Plain; Minimum Order Quantity: PBT; Stainless Steel; Material: PBT; Stainless Steel
• Turning Insert: CCGW21.5.5FNA3 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Corner Radius End Mill: 0.05″ Dia, 0.075″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.045″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Compression Spring: 1.351″ OD, 4.5″ Free Length 0.207″ Wire Dia, 156.182 lb Max Load, 132.172 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Corner Radius End Mill: 0.0469″ Dia, 0.071″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.035″ Dia, 0.053″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 3/16″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Corner Radius End Mill: 0.09″ Dia, 1/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Tapered End Mill: 5 ° per Side, 1/16″ Small Dia, 5/16″ LOC, 3 Flutes, Solid Carbide, Square End 1/8″ Shank Dia, 1-1/2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• TNMG666EEM AC8015P Carbide Turning Insert Absotech Finish, 1.2992″ Long, 3/4″ Inscribed Circle, 0.0945″ Corner Radius, 0.3748″ Thick, 60° Included Angle, Series AC8000P
• Chucking Reamer: 3/64" Dia, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Double Angle Milling Cutter: 45 °, 5/32″ Cut Dia, 5/64″ Cut Width, 3/16″ Shank Dia, Solid Carbide 2″ OAL, Uncoated, 4 Teeth
• Turning Insert: TCGW21.51FN_A3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW21.5.5FNA4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Corner Radius End Mill: 0.0313″ Dia, 3/64″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1969″ Dia, 0.2362″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Ball End Mill: 0.01″ Dia, 0.03″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.015″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series KOR5
• Chucking Reamer: #55, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Jobber Length Drill Bit: 0.5118″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series KOR5
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1-1/8″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series KOR5
• Corner Radius End Mill: 0.1575″ Dia, 0.1969″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.045″ Dia, 0.068″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1969″ Dia, 0.2362″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 3/64'' Dia, 9/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 1 Flute, Solid Carbide Single End, Amorphous Diamond Finish, Upcut Flute, 22 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, HSSE Finish 0.921″ Thread Length, 3.93″ OAL, Right Hand, H5, Series 306
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, HSSE Finish 0.921″ Thread Length, 4.33″ OAL, Right Hand, H5, Series 306
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, HSSE Finish 0.921″ Thread Length, 3.93″ OAL, Right Hand, H3, Series 306
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Spiral Point Tap: 1/2-13, UNC, 3 Flutes, Plug, HSSE Finish 0.921″ Thread Length, 4.33″ OAL, Right Hand, H3, Series 306
• Duct Tape: 1/2″ Wide, 4 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Boring Bar: 0.18″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2-1/2″ OAL, 0.005″ Corner Radius
• Boring Bar: 0.18″ Min Bore, 1″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2-1/2″ OAL, 0.005″ Corner Radius
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: 0.0345″ Dia, 2″ OAL, 1/4″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1562″ Dia, 3/4″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Woodruff Keyseat Cutter: 1/4" Cut Dia, 1/16" Cut Width, 1/4" Shank Dia, Straight Tooth
• Corner Radius End Mill: 3/16″ Dia, 1″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Ball End Mill: 0.069″ Dia, 0.207″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• 10mm Head Diam, 15/64″ Shank Diam, 82° Cobalt Countersink 1-7/8″ OAL, Single End, Straight Shank, Right Hand Cut
• Chucking Reamer: 0.025″ Dia, 1-1/2″ OAL, 3/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Ball End Mill: 0.066″ Dia, 0.198″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.047″ Dia, 0.141″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: 0.029″ Dia, 2″ OAL, 7/32″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Compression Spring: 1.116″ OD, 5″ Free Length 0.125″ Wire Dia, 49.667 lb Max Load, 22.26 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 0.0938″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 20 ° Helix, Bright/Uncoated, Corner Radius End
• Chucking Reamer: 0.0375″ Dia, 2″ OAL, 9/32″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Ball End Mill: 0.05″ Dia, 0.15″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chucking Reamer: 0.0245″ Dia, 1-1/2″ OAL, 3/16″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Ball End Mill: 0.055″ Dia, 0.165″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Boring Bar: 4.5 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 4 mm Shank Dia, 49 mm OAL, 0.15 mm Corner Radius
• Spiral Point Tap: M8 x 0.75, 3 Flutes, Plug, 6H, Powdered Metal, V Finish 18.5 mm Thread Length, 150 mm OAL, Right Hand, D4 Series 16530
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.035″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• Boring Bar: 4.5 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 4 mm Shank Dia, 49 mm OAL, 0.05 mm Corner Radius
• Turning Insert: CNGA433 AB20, Ceramic Al2O3 & TiCN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Boring Bar: 4.5 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 4 mm Shank Dia, 49 mm OAL, 0.08 mm Corner Radius
• Boring Bar: 4.5 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 4 mm Shank Dia, 49 mm OAL, 0.15 mm Corner Radius
• Ball End Mill: 0.047″ Dia, 0.07″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.4375″ Dia, 2″ LOC, 2 Flute, Solid Carbide 4″ OAL, 7/16″ Shank Dia, 45 ° Helix, Uncoated, Single End, Series 2015
• Polyester Film Tape: 1-1/2″ Wide, 72 yd Long, 3.2 mil Thick 57 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Ball End Mill: 0.04″ Dia, 0.12″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Chucking Reamer: #54, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Woodruff Keyseat Cutter: 0.125″ Cut Dia, 0.025″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 6 Teeth, Solid Carbide
• White Double-Sided Polyethylene Foam Tape: 3/4″ Wide, 1.5 yd Long, 62 mil Thick, Rubber Adhesive
• Ball End Mill: 0.055″ Dia, 0.082″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 20; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 4; Overall Length: 1.57
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 285
• Ball End Mill: 0.0236″ Dia, 0.0354″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.125″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Ball End Mill: 0.047″ Dia, 0.07″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 1/8″ Dia, 5/8″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 37 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 0.1″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Compression Spring: 0.705″ OD, 6.25″ Free Length 0.112″ Wire Dia, 56.444 lb Max Load, 29.961 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.0591" Dia, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Compression Spring: 1.351″ OD, 9″ Free Length 0.112″ Wire Dia, 30.855 lb Max Load, 5.985 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.0551'' Dia, 0.1575'' LOC, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Square End Mill: 19/64'' Dia, 13/16'' LOC, 5/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, 35 ° Helix, Centercutting, RH Cut, Series SAP
• Ball End Mill: 0.125″ Dia, 0.1″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Class ZZ Plus Plug Gage: 1.7054″ Dia Tool Steel, Handle Sold Separately
• Impact Socket: 1″ Drive 6-Point
• Woodruff Keyseat Cutter: 0.25″ Cut Dia, 0.062″ Cut Width, 1/4″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Ball End Mill: 0.1875″ Dia, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 & 38 ° Helix, AlCr Coated, Single End, Series 2919L
• Chucking Reamer: #53, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Polyimide Film Tape: 1/2″ Wide, 36 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 311 ° F
• Grooving Insert: GBA32 PR930, Solid Carbide TiCN Finish, Right Hand, 1.25 mm Cutting Width, 2 mm Max Depth, Series GBA
• Spiral Flute Tap: #8-36, UNF, 2 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-8 Finish 2.48″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50S800
• Chucking Reamer: 1/16" Dia, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Chucking Reamer: #51, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Corner Radius End Mill: 1/8″ Dia, 1″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spiral Flute Tap: #8-32, UNC, 3 Flute, 1.5-2 P, 3B Class of Fit, GLT-1 Finish 0.315″ Thread Length, Right Hand Flute, Right Hand Thread, H2, Series Enorm
• Corner Radius End Mill: 1/8″ Dia, 1″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Spiral Flute Tap: #6-40, UNF, 3 Flute, Modified Bottoming, H7 Class of Fit, Cobalt, GLT-1 Finish 0.472″ Thread Length, 2.205″ OAL, Right Hand Flute, Right Hand Thread, H7, Series BU50C343
• Abrasive Bur: SA-14M, Cylinder Bright Finish, 50mm OAL, 16mm LOC, Flat End
• Polyester Film Tape: 1-1/2″ Wide, 72 yd Long, 2.5 mil Thick 25 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Polyester Film Tape: 1″ Wide, 72 yd Long, 3.5 mil Thick 50 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 3.543″ OAL, Right Hand Flute, Right Hand Thread, H4, Series BU50C300
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 0.512″ Thread Length, 2.756″ OAL, Right Hand Flute, Right Hand Thread, H2, Series BU50C310
• Spiral Flute Tap: 5/16-24, UNF, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 0.669″ Thread Length, 3.543″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C310
• Spiral Flute Tap: #8-36, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 2.48″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C300
• Corner Radius End Mill: 0.2188″ Dia, 1/2″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 45 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XP
• Corner Radius End Mill: 1/4″ Dia, 5/16″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrTiN Coated, Corner Radius End, Centercutting
• Chucking Reamer: 0.2569″ Dia, 3.9794″ OAL, 1.1032″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.09″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.12″ Radius, 5 Flutes, Solid Carbide 4″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2213
• Ball End Mill: 0.3937″ Dia, 4 Flute, Solid Carbide 76 mm OAL, 10 mm Shank Dia, AlTiN Coated, Single End, Series HARVI
• Chamfer Mill: 5 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, Bright/Uncoated
• Corner Radius End Mill: 0.1181″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Compression Spring: 1.175″ OD, 8.5″ Free Length 0.148″ Wire Dia, 74.095 lb Max Load, 22.299 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3/16″ Dia, 0.2″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• White Double-Sided Urethane Foam Tape: 3″ Wide, 5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• Duct Tape: 1/2″ Wide, 2.6 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Spiral Point Tap: M12 x 1.75, Metric, 3 Flutes, Plug, 6H, High Speed Steel, Uncoated 23 mm Thread Length, 110 mm OAL, Right Hand, Series CoroTap 200
• Ball End Mill: 0.078″ Dia, 0.062″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, TiB2 Coated, Single End
• Ball End Mill: 0.047″ Dia, 0.038″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.039″ Dia, 0.031″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Square End Mill: 0.01'' Dia, 1/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.078″ Dia, 0.062″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.1181″ Dia, 4 Flute, Solid Carbide 50 mm OAL, 6 mm Shank Dia, 40 ° Helix, DUROREY Coated, Single End
• Ball End Mill: 0.023″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated
• Ball End Mill: 0.1575″ Dia, 4 Flute, Solid Carbide 60 mm OAL, 6 mm Shank Dia, 40 ° Helix, DUROREY Coated, Single End
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.06″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Boring Bar: 0.07″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Compression Spring: 1.469″ OD, 5.25″ Free Length 0.192″ Wire Dia, 119.234 lb Max Load, 66.736 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/4″ Dia, 3/4″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Variable ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series Eliminator
• Boring Bar: 0.06″ Min Bore, 0.15″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Compression Spring: 1.528″ OD, 3″ Free Length 226.432 lb Max Load, 367.305 lb/in Spring Rate, Stainless Steel
• Woodruff Keyseat Cutter: 0.1875″ Cut Dia, 0.125″ Cut Width, 3/16″ Shank Dia, Straight Tooth 2″ OAL, 6 Teeth, Solid Carbide, AlTiN Finish
• Boring Bar: 0.06″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Boring Bar: 0.06″ Min Bore, 1/2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• O-Ring: 0.69″ ID x 1.03″ OD, 0.16″ Thick, Viton Round Cross Section
• Boring Bar: 0.06″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.06″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Corner Radius End Mill: 7/16″ Dia, 5/8″ LOC, 0.02″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 7/16″ Shank Dia, 45 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Boring Bar: 0.07″ Min Bore, 0.15″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Jobber Length Drill Bit: 0.4134″ Dia, 135 °, High Speed Steel TiN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank
• Corner Radius End Mill: 1/4″ Dia, 1-1/4″ LOC, 0.03″ Radius, 6 Flutes, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 37 ° Helix, EXO Coated, Corner Radius End, Series VGM6
• Boring Bar: 0.07″ Min Bore, 0.2″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Feeler Stock Rolls; Thickness (mm): 0.1300; Thickness (Decimal Inch): 0.0050; Overall Length (Feet): 25.00; Width (mm): 1/2; Width (Inch): 1/2; Material: High Carbon Steel; Material: High Carbon Steel
• Boring Bar: 0.07″ Min Bore, 0.4″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL, 0.002″ Corner Radius
• Ball End Mill: 0.2953″ Dia, 0.748″ LOC, 4 Flute, Solid Carbide 63 mm OAL, 8 mm Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert
• Chucking Reamer: #52, 2-1/2" OAL, 1/2" Flute Length, Straight-Cylindrical Shank, HSS
• Square End Mill: 7/16'' Dia, 9/16'' LOC, 7/16'' Shank Dia, 2-3/4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Compression Spring: 0.764″ OD, 5″ Free Length 0.125″ Wire Dia, 70.117 lb Max Load, 50.555 lb/in Spring Rate, Stainless Steel
• Profile Boring Bar: 3 mm Min Bore, 7 mm Max Depth, Right Hand Cut, Fine Grain Solid Carbide 4 mm Shank Dia, 25 mm OAL, 0.1 mm Corner Radius
• Corner Radius End Mill: 1/2″ Dia, 2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 3/4″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Centercutting, Series 1035
• Chucking Reamer: #50, 3" OAL, 3/4" Flute Length, Straight-Cylindrical Shank, HSS
• Clear Double-Sided Acrylic Tape: 1/2″ Wide, 5 yd Long, 40 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.4219″ Dia, 0.875″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 7/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End, Series SAPB-NB
• Ball End Mill: 0.4219″ Dia, 0.875″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 7/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Single End, Series SAPB
• Roughing End Mill
• Ball End Mill: 0.3906″ Dia, 0.875″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 7/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Single End, Series SAPB
• Turning Insert: RCMT 19 06 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3750″ Corner Radius, N/A Round, Series RCMT (INCH)
• Turning Insert: VNGA331SN014FL3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Turning Insert: VNGA332TN011EL2, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Turning Insert: VCGT331FN_A6 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGT
• Compression Spring: 0.999″ OD, 8″ Free Length 0.192″ Wire Dia, 230.793 lb Max Load, 129.357 lb/in Spring Rate, Music Wire
• Compression Spring: 1.821″ OD, 4″ Free Length 278.606 lb Max Load, 197.094 lb/in Spring Rate, Music Wire
• Turning Insert: CNGA432TN009BL3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CNGA
• Turning Insert: VCGW331FN_A6 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Compression Spring: 2.468″ OD, 5.25″ Free Length 0.225″ Wire Dia, 156.761 lb Max Load, 53.725 lb/in Spring Rate, Music Wire
• Compression Spring: 2.703″ OD, 5″ Free Length 133.892 lb Max Load, 62.194 lb/in Spring Rate, Stainless Steel
• Turning Insert: VNGA332SN013EL2, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA