Products

• Turning Insert: DCGW32.52FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: TCGW32.52FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW32.51FN_A5 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW18155FNA4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW18151FNA3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: DCGW32.53FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Ball End Mill: 0.25″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Turning Insert: DCGT32.53FN_A4 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0472″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGT
• Ball End Mill: 0.082″ Dia, 0.246″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.094″ Dia, 0.282″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.109″ Dia, 0.327″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.054″ Dia, 0.162″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.091″ Dia, 0.273″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.057″ Dia, 0.171″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 1/2″ Dia, 3/4″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2215
• Ball End Mill: 0.044″ Dia, 0.132″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.071″ Dia, 0.213″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 2.644″ OD, 8.5″ Free Length 136.728 lb Max Load, 37.46 lb/in Spring Rate, Stainless Steel
• Pipe Wrench: 14″ OAL, Steel 2″ Max Pipe Capacity
• Compression Spring: 0.764″ OD, 3.75″ Free Length 0.135″ Wire Dia, 85.624 lb Max Load, 97.931 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.087″ Dia, 0.261″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: VPET1003FL WPU7620, Solid Carbide AlTiN Finish, Left Hand, 1/4″ Inscribed Circle, 35.0 &deg N/A Diamond, Series VPET
• Compression Spring: 0.588″ OD, 5.75″ Free Length 0.112″ Wire Dia, 65.988 lb Max Load, 52.81 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.094″ Dia, 0.282″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Press Fit Headless Drill Bushing: HM, 5.5″ ID Steel
• Turning Insert: VPET1003008FR WPU7620, Solid Carbide AlTiN Finish, Right Hand, 1/4″ Inscribed Circle, 0.0031″ Corner Radius, 35.0 &deg N/A Diamond, Series VPET
• Spiral Point Tap: 3/8-16, UNC, 4 Flutes, Plug, 2BX, HSS-E, Slidur Finish 100 mm OAL, Right Hand, H6/H7, Series 4660
• Screw Machine Length Drill Bit: 0.1457″ Dia, 142 °, Solid Carbide ALtima Plus Finish, Right Hand Cut, Helical Flute, Straight-Cylindrical Shank
• Turning Insert: VPET1003FL WPU7610, Solid Carbide AlTiN Finish, Left Hand, 1/4″ Inscribed Circle, 35.0 &deg N/A Diamond, Series VPET
• Turning Insert: VPET1003008FL WPU7610, Solid Carbide AlTiN Finish, Left Hand, 1/4″ Inscribed Circle, 0.0031″ Corner Radius, 35.0 &deg N/A Diamond, Series VPET
• Ball End Mill: 0.4724″ Dia, 1.1811″ LOC, 3 Flute, Solid Carbide 83 mm OAL, 12 mm Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 7.200; Material Grade: Submicron; Maximum Bore Depth (mm): 40.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 66.0000; Finish Coating: TiCN; Serie
• Turning Insert: VPET1003015FL WPU7610, Solid Carbide AlTiN Finish, Left Hand, 1/4″ Inscribed Circle, 0.0059″ Corner Radius, 35.0 &deg N/A Diamond, Series VPET
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.093″ Dia, 0.074″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 7.200; Material Grade: Submicron; Maximum Bore Depth (mm): 45.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 71.0000; Finish Coating: TiCN; Serie
• Turning Insert: VPET1003008FR WPU7610, Solid Carbide AlTiN Finish, Right Hand, 1/4″ Inscribed Circle, 0.0031″ Corner Radius, 35.0 &deg N/A Diamond, Series VPET
• Turning Insert: VPET1003FR WPU7610, Solid Carbide AlTiN Finish, Right Hand, 1/4″ Inscribed Circle, 35.0 &deg N/A Diamond, Series VPET
• O-Ring: 3-1/2″ ID x 3-11/16″ OD, 3/32″ Thick, Dash 153, HNBR Round Cross Section
• Double Angle Milling Cutter: 90 °, 1/4″ Cut Dia, 1/8″ Cut Width, 1″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Nano Coated, 6 Teeth
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.078″ Dia, 0.117″ LOC, 0.01″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Polyester Film Tape: 72 yd Long, 3.5 mil Thick 50 Lb/In Tensile Strength, Acrylic Adhesive, 266 ° F
• Compression Spring: 1.88″ OD, 7.5″ Free Length 187.997 lb Max Load, 79.817 lb/in Spring Rate, Stainless Steel
• Woodruff Keyseat Cutter: 0.062″ Cut Dia, 0.01″ Cut Width, 1/8″ Shank Dia, Straight Tooth 1-1/2″ OAL, 4 Teeth, Solid Carbide, AlTiN Finish
• Duct Tape: 1″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 1″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Compression Spring: 1.293″ OD, 5.5″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 136.23 lb/in Spring Rate, Music Wire
• Duct Tape: 1″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Compression Spring: 1.351″ OD, 8″ Free Length 0.112″ Wire Dia, 30.855 lb Max Load, 6.755 lb/in Spring Rate, Stainless Steel
• Duct Tape: 1″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Duct Tape: 1″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Compression Spring: 1.821″ OD, 6.5″ Free Length 0.192″ Wire Dia, 134.591 lb Max Load, 40.077 lb/in Spring Rate, Music Wire
• Kyocera RDFG 10FR PR915 Grade PVD Carbide, Round, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Stainless Steel, (K) Gray Cast Iron, (K) Nodular Cast Iron
• Duct Tape: 1″ Wide, 6.3 mil Thick, Vinyl Rubber Adhesive, 14 lb/in Tensile Strength
• Compression Spring: 1.469″ OD, 2.875″ Free Length 0.162″ Wire Dia, 76.412 lb Max Load, 65.76 lb/in Spring Rate, Stainless Steel
• Single Point Threading Tools; Thread Type: Internal; Material: Solid Carbide; Profile Angle: 60; Threading Diameter (Decimal Inch): 0.2300; Cutting Depth (Decimal Inch): 0.6000; Maximum Threads Per Inch: 40
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.787″ Thread Length, 3.543″ OAL, Right Hand Flute, Right Hand Thread, H5, Series BU50C300
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Modified Bottoming, H11 Class of Fit, Cobalt, GLT-1 Finish 3.543″ OAL, Right Hand Flute, Right Hand Thread, H11, Series BU50C344
• Combo Drill & Countersink: #4-1/2, 3/8″ Body Dia, 118 ™, High Speed Steel Bright (Polished) Finish, 9/64″ Point Dia, 9/64″ Point Length, 2-1/2″ OAL, Right Hand Cut
• Spiral Flute Tap: 5/16-18, UNC, 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 3.543″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU50C310
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9839; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Spiral Flute Tap: #3-48, UNC, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, GLT-1 Finish 1.969″ OAL, Right Hand Flute, Right Hand Thread, H2, Series BU50C310
• Spiral Point Tap: M8 X 1.25, Metric, 3 Flutes, 3 to 5, 6H, HSS-E, TiN Finish 6″ OAL, Right Hand, Series 4569
• Spiral Flute Tap: M8 x 1.00, DIN, 3 Flute, Modified Bottoming, 6H Class of Fit, Black Oxide Finish 1.378″ Thread Length, 3.5433″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• Spiral Flute Tap: M8 x 1.25, DIN, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.378″ Thread Length, 3.5433″ OAL, Right Hand Flute, Right Hand Thread, Series PRO-981SF
• VCGT220.5MEFC-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.437″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.1252″ Thick, 35° Included Angle, Series AC5000S
• Compression Spring: 1.4″ OD, 4″ Free Length 0.162″ Wire Dia, 79.924 lb Max Load, 50.813 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCGW32.5V5 NX2525, Cermet
• Spiral Flute Tap: M8 x 1.00, DIN & ANSI, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.378″ Thread Length, 3.5433″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• VCGT220MEFC-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.437″ Long, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 0.1252″ Thick, 35° Included Angle, Series AC5000S
• Compression Spring: 1.41″ OD, 3.75″ Free Length 349.474 lb Max Load, 403.233 lb/in Spring Rate, Music Wire
• Spiral Flute Tap: M8 x 1.25, DIN & ANSI, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.378″ Thread Length, 3.5433″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• VCGT220RFX-AC5025S Carbide Turning Insert Absotech Bronze Finish, 0.437″ Long, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 0.1252″ Thick, 35° Included Angle, Series AC5000S
• Compression Spring: 1.469″ OD, 6″ Free Length 38.293 lb Max Load, 11.654 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: #4-48, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Hardlube Finish 0.669″ Thread Length, 2.2047″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Spiral Flute Tap: #4-40, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Hardlube Finish 0.669″ Thread Length, 2.2047″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Grooving Insert: DGLGL AH7025, Solid Carbide TiAlN Finish, Neutral, 0.079″ Cutting Width, Series DGL
• Spiral Flute Tap: #5-40, DIN, 3 Flute, Modified Bottoming, 2B Class of Fit, HSS-E, Hardlube Finish 0.748″ Thread Length, 2.2047″ OAL, Right Hand Flute, Right Hand Thread, Series PER-980SF
• Jobber Length Drill Bit: 0.0126″ Dia, 118 °, Cobalt Bright/Uncoated, Right Hand Cut, Spiral Flute
• Spiral Flute Tap: M7 x 1.00, DIN & ANSI, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.181″ Thread Length, 3.1496″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.039″ Cutting Width, Series TDIP
• Square End Mill: 1/32'' Dia, 0.025'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Chucking Reamer: 0.2008″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Duct Tape: 1/2″ Wide, 3.5 mil Thick, Aluminum Foil Silicone Adhesive, 20 lb/in Tensile Strength
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Compression Spring: 2.174″ OD, 8″ Free Length 0.207″ Wire Dia, 140.256 lb Max Load, 32.09 lb/in Spring Rate, Music Wire
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Chucking Reamer: 0.2185″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Glass Cloth Tape; Width (Inch): 1/2; Material Type: Fiberglass; PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 11.7000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• Back Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 0.999″ OD, 8″ Free Length 0.177″ Wire Dia, 185.703 lb Max Load, 87.38 lb/in Spring Rate, Music Wire
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Grooving Insert: TDIPP TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TDIP
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 0.999″ OD, 7″ Free Length 0.192″ Wire Dia, 230.793 lb Max Load, 148.909 lb/in Spring Rate, Music Wire
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.293″ OD, 4.75″ Free Length 0.225″ Wire Dia, 283.564 lb Max Load, 235.831 lb/in Spring Rate, Music Wire
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 1.88″ OD, 2.625″ Free Length 187.997 lb Max Load, 262.926 lb/in Spring Rate, Stainless Steel
• Tap Sets; Overall Length (Decimal Inch): 5.7500
• Tap Sets; Overall Length (Decimal Inch): 4.9063
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Left Hand Cut, Series 282
• Spiral Flute Tap: M8 x 1.25, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4634
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• TCMT1.81.50-PF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 7/32″ Inscribed Circle, 0.0079″ Corner Radius, 3/32″ Thick, 60° Diamond
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Ball End Mill: 0.0394″ Dia, 0.0315″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Milling Insert: WEP20, Solid Carbide N/A Finish,
• Back Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Ball End Mill: 0.025″ Dia, 0.038″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Ball End Mill: 0.025″ Dia, 0.038″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Hand Socket: 1/2″ Drive, 6-Point Chrome
• Square End Mill: 1/8'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.047″ Dia, 0.07″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Catches; Type: Sealed Magnetic Catch; Length (mm): 50.00; Height (mm): 6.6000; Width (mm): 17.00; Finish/Coating: Blue; Magnetic Force: 8.8; Minimum Order Quantity: Silicone Rubber; Material: Silicone Rubber; Color: Blue; Material: Silicone Rubber
• Corner Radius End Mill: 0.025″ Dia, 0.038″ LOC, 0.004″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.293″ OD, 3.75″ Free Length 0.225″ Wire Dia, 200.667 lb Max Load, 267.213 lb/in Spring Rate, Stainless Steel
• Tapered End Mill: 15 ° per Side, 0.24″ LOC, 3 Flutes, Solid Carbide, Square End 2″ OAL, AlTiN Nano Finish, Series Miniature End Mills - Tapered - Square
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.06″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 1/64″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Turning Insert: CCGT21.51FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: CCGT21.5.5FNA3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Turning Insert: Q-DCMW21.51 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Right Hand, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMW
• Spiral Flute Tap: M3.50 x 0.60, M, Modified Bottoming, 6H Class of Fit, Cobalt, TICN Finish Right Hand Flute, Right Hand Thread, D4, Series B0459601
• Turning Insert: CCGT21.5.5FNA3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Kyocera CPMT 321XQ CA5515 Grade CVD Carbide, 11 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (P) Carbon/Alloy Steel
• Turning Insert: CCGT21.51FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• VCMT080202PP PR1225 Carbide Turning Insert Megacoat Finish, Neutral, 3/16″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 35° Diamond
• Turning Insert: CCGT21.51FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Combo Drill & Countersink: #7, 5/8″ Body Dia, 118 ™, High Speed Steel TiN Finish, 1/4″ Point Dia, 3-1/4″ OAL, Right Hand Cut
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 35 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series CoroMill Dura
• Turning Insert: CCGT32.51FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Kyocera CPMT 321GP CA5525 Grade CVD Carbide, 11 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Light Interruption and Finishing in (P) Carbon/Alloy Steel
• Turning Insert: CCGT32.52FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Milling Insert: WKP35S, Solid Carbide N/A Finish,
• Milling Insert: T3225, Solid Carbide N/A Finish,
• Turning Insert: CCGT32.51FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Milling Insert: T3225, Solid Carbide N/A Finish,
• Turning Insert: CCGT32.51FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Polyester Film Tape: 3/4″ Wide, 10 yd Long, 2.4 mil Thick 26 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Milling Insert: T3225, Solid Carbide N/A Finish,
• Chucking Reamer: 0.2495″ Dia, 6″ OAL, 1-1/2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Milling Insert: T3225, Solid Carbide N/A Finish,
• Chucking Reamer: 0.5315″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Compression Spring: 0.999″ OD, 9.5″ Free Length 0.162″ Wire Dia, 146.271 lb Max Load, 48.563 lb/in Spring Rate, Music Wire
• Compression Spring: 2.115″ OD, 5.25″ Free Length 0.192″ Wire Dia, 84.754 lb Max Load, 33.984 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.468″ OD, 5.5″ Free Length 0.192″ Wire Dia, 73.118 lb Max Load, 25.559 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.5615″ Dia, 8″ OAL, 2″ Flute Length, Straight Shank, High Speed Steel 8 Flute
• Corner Radius End Mill: 0.02″ Dia, 0.016″ LOC, 0.004″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.031″ Dia, 0.046″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 1/16'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Spiral Flute, 30 ° Helix, Centercutting, RH Cut, RH Flute, Series TS-201
• Corner Radius End Mill: 0.4724″ Dia, 1.1811″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.4724″ Dia, 1.1811″ LOC, 2 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Spiral Point Tap: M4 x 0.7, Metric Coarse, 3 Flutes, Plug, 6H, Powdered Metal, Steam Oxide Finish 29/64″ Thread Length, 2-1/8″ OAL, Right Hand, D4, Series 712
• Straight Flutes Tap: Metric, 3 Flutes, Semi-Bottoming, 6H, Powdered Metal High Speed Steel, Bright/Uncoated Right Hand, Series CoroTap 100
• Corner Radius End Mill: 0.4724″ Dia, 1.1811″ LOC, 3 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.4724″ Dia, 1.1811″ LOC, 4 Flutes, Solid Carbide 30 ° Helix, AlTiN Coated, Corner Radius End
• Chucking Reamer: 0.688″ Dia, 9″ OAL, 2-1/4″ Flute Length, Straight Shank, High Speed Steel 8 Flute
• Spiral Point Tap: M5 x 0.8, Metric Coarse, 3 Flutes, Plug, 6H, Powdered Metal, Steam Oxide Finish 37/64″ Thread Length, 2-3/8″ OAL, Right Hand, D3, Series 712
• SpyroTec 12.5mm Head Diam, 3.2mm Cut Diam, 3 Flute 60° High Speed Steel Countersink TiAlN Finish, Single End, 8mm Cylindrical Shank, Right Hand Cut
• Ball End Mill: 0.025″ Dia, 0.037″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 1/2″ Dia, 3/4″ LOC, 0.06″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCr Coated, Corner Radius End, Series 2215
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1-1/2; Length (yd): 5.00; Thickness (mil): 6.0000; Minimum Operating Temperature (F): -60.000; Maximum Operating Temperature (F): 250.000; Color: Clear; Liner Material: Kraft Paper; Series:
• Corner Radius End Mill: 3 Flutes, Solid Carbide 41, 43 & 45 ° Helix, nano-Si Coated, Corner Chamfer End, Centercutting, Series 6800
• Brackets; Type: Angle Bracket; Length (mm): 65.00; Width (mm): 20.00; Height (mm): 120.0000; Load Capacity (Lb.): 28.000; Finish/Coating: Mirror; Minimum Order Quantity: 304 Stainless Steel; Material: 304 Stainless Steel
• Screw Machine Length Drill Bit: 0.2165″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Ball End Mill: 0.375″ Dia, 1″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Single End, Series CoroMill Dura
• 4.5mm x 5' EPDM Round Cord Stock 300°F Max, Shore 70A, 1,500 psi Tensile Strength, Black
• Square End Mill: 7/64'' Dia, 1-1/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Clear Double-Sided Polyethylene Foam Tape: 2″ Wide, 5 yd Long, 2 mil Thick, Acrylic Adhesive
• 1″ Head Diam, 1/2″ Shank Diam, 6 Flute 60° High Speed Steel Countersink Oxide Finish, 2-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Grooving Insert: GDMS2220GM PR1215, Solid Carbide Megacoat, Neutral, 2.2 mm Cutting Width, 17 mm Max Depth, Series KGD
• Ball End Mill: 0.1″ Dia, 0.15″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Grooving Insert: GDMS2020PH PR1225, Solid Carbide Megacoat, Neutral, 2 mm Cutting Width, 17 mm Max Depth, Series KGD
• Ball End Mill: 0.5″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/2″ Shank Dia, 38 ° Helix, AlCr Coated, Single End, Series 2115
• Grooving Insert: GDMS2020PH PR1535, Solid Carbide Megacoat Nano Finish, Neutral, 2 mm Cutting Width, 17 mm Max Depth, Series KGD
• Tap Sets; Overall Length (Decimal Inch): 5.4375
• Duct Tape: 3″ Wide, 4 mil Thick, Aluminum Foil Acrylic Adhesive, 16 lb/in Tensile Strength
• Hook & Loop; Shape: Roll; Color: Black; Roll Length (Feet): 20.00; Component Type: Hook & Loop
• Press Fit Headless Drill Bushing: HM, 6.1″ ID Steel
• Rigid Top Plate Caster: Thermoplastic Rubber, 4″ Wheel Dia, 1-1/4″ Wheel Width, 247 lb Capacity, 4-15/16″ OAH 2.9375″ Plate Length, 4.13″ Plate Width, No Brake
• Tap Sets; Overall Length (Decimal Inch): 4.4688
• Spiral Point Tap: 5/16-18, UNC, 3 Flutes, Plug, HSSE Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H5, Series 306
• CCET09T304MFR-U PDL025 Carbide Turning Insert Diamond-Like Carbon (DLC) Finish, RH, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 5/32″ Thick, 80° Diamond
• Spiral Point Tap: 5/16-24, UNF, 3 Flutes, Plug, HSSE Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H4, Series 306
• Spiral Point Tap: 5/16-24, UNF, 3 Flutes, Plug, HSSE Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H3, Series 306
• Corner Radius End Mill: 0.1181″ Dia, 0.2362″ LOC, 4 Flutes, Solid Carbide 38 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Press Fit Headless Drill Bushing: P, 13/16″ ID, 1″ OD 1″ OAL, Carbon Steel
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Spiral Point Tap: 5/16-18, UNC, 3 Flutes, Plug, HSSE Finish 0.665″ Thread Length, 3.54″ OAL, Right Hand, H3, Series 306
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• AOMT180516R IN1030 Carbide Milling Insert TiCN Finish
• Abrasive Bur: Flat 3/8″ Shank, 2-1/2″ OAL
• Compression Spring: 1.469″ OD, 5″ Free Length 0.192″ Wire Dia, 119.234 lb Max Load, 70.35 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 3 Flutes, Solid Carbide 39, 40 & 41 ° Helix, Carbo Coated, Corner Chamfer End, Centercutting, Series 6978
• Jobber Length Drill Bit: 0.2656″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Press Fit Headless Drill Bushing: P, 7/8″ ID, 1-1/8″ OD 7/8″ OAL, Carbon Steel
• Clear Double-Sided Polyethylene Foam Tape: 1/2″ Wide, 5 yd Long, 2 mil Thick, Acrylic Adhesive
• Clear Double-Sided Polyethylene Foam Tape: 1″ Wide, 5 yd Long, 2 mil Thick, Acrylic Adhesive
• Spiral Flute Tap: M3, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Spiral Flute Tap: M5, Metric, 3 Flute, Semi-Bottoming, 6H Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Compression Spring: 2.585″ OD, 4.5″ Free Length 0.225″ Wire Dia, 149.99 lb Max Load, 59.141 lb/in Spring Rate, Music Wire
• Clear Double-Sided Polyethylene Foam Tape: 4″ Wide, 5 yd Long, 2 mil Thick, Acrylic Adhesive
• Spiral Flute Tap: #6-32, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Compression Spring: 1.528″ OD, 3.75″ Free Length 0.148″ Wire Dia, 57.949 lb Max Load, 32.648 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: #5-44, UNF, 2 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, TICN Finish Right Hand Flute, Right Hand Thread, H2, Series BU459611
• Spiral Flute Tap: #10-24, UNC, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel-E, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Threaded Ring Gage: M8 x 1.25 Thread, Metric, Class 6G, Go
• Threaded Ring Gage: M8 x 1.25 Thread, Metric, Class 6G, No Go
• Ball End Mill: 0.25″ Dia, 3 Flute, Solid Carbide 3″ OAL, 1/4″ Shank Dia, 37 ° Helix, ZrN Coated, Single End, Series 2045
• Thermal Imaging Cameras; Display Type: VGA; Accuracy (C): ¬± 2; Resolution: 640 x 480; Batteries Included: Yes
• Clear Double-Sided Polyethylene Foam Tape: 1-1/2″ Wide, 1.5 yd Long, 2 mil Thick, Acrylic Adhesive
• Impact Socket: 3/4″ Drive 6-Point
• Clear Double-Sided Polyethylene Foam Tape: 1-1/2″ Wide, 1.5 yd Long, 2 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 4 Flutes, Solid Carbide Helix, DUROREY Coated, Corner Radius End, Centercutting, Series 8592
• Screw Machine Length Drill Bit: 0.1693″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 226
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, nano-Si Coated, Corner Radius End, Centercutting, Series 6964
• Compression Spring: 1.528″ OD, 5″ Free Length 226.432 lb Max Load, 204.058 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.1405″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series 6963
• Grooving Insert: GMM6020300R CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 6 mm Cutting Width, 30 mm Max Depth, Series KGM
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, nano-Si Coated, Corner Radius End, Centercutting, Series 6964
• 3/16″ Head Diam, 3/16″ Shank Diam, 1 Flute 90° Solid Carbide Countersink 1-1/2″ OAL
• Milling Insert: RDMX 12T3MOT WAN1240, WAN1240, Solid Carbide N/A Finish,
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series 6963
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, nano-Si Coated, Corner Radius End, Centercutting, Series 6964
• 90° 2″ OAL Solid Carbide Spotting Drill Bright/Uncoated, 1″ Flute Length, 3/16″ Shank Diam, RH Cut, Series 404
• Ball End Mill: 0.25″ Dia, 3 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 37 ° Helix, Uncoated, Single End, Series 2047
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, nano-Si Coated, Corner Radius End, Centercutting, Series 6965
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, nano-Si Coated, Corner Radius End, Centercutting, Series 6965
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series 6962
• Ball End Mill: 0.025″ Dia, 0.038″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Compression Spring: 0.881″ OD, 8″ Free Length 0.072″ Wire Dia, 13.923 lb Max Load, 2.875 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series 6962
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 4 Flutes, Solid Carbide 38 & 40 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series 6962