Products

• Grooving Insert: TQJJ TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.03″ Cutting Width, Series TQJ27
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.700; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Ball End Mill: 0.0472″ Dia, 0.0709″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Grooving Insert: TQSS TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.118″ Cutting Width, Series TQS27
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• Square End Mill: 3/8'' Dia, 1'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, Helical Flute, 40 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/32″ Dia, 0.139″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Compression Spring: 1.586″ OD, 5″ Free Length 0.207″ Wire Dia, 188.324 lb Max Load, 93.741 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 3/64″ Dia, 0.07″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Square End Mill: 1/8'' Dia, 5/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 3/32″ Dia, 0.139″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/32″ Dia, 0.139″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.700; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: AlTiN; Seri
• Grooving Insert: TQSS TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.125″ Cutting Width, Series TQS27
• Square End Mill: 0.1181'' Dia, 0.4724'' LOC, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 3/8″ Dia, 1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/8″ Shank Dia, 37 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series XPVS
• Compression Spring: 1.116″ OD, 9.5″ Free Length 0.105″ Wire Dia, 31.097 lb Max Load, 6.152 lb/in Spring Rate, Stainless Steel
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.700; Material Grade: Submicron; Maximum Bore Depth (mm): 16.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: AlTiN; Seri
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.200; Material Grade: Submicron; Maximum Bore Depth (mm): 14.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: AlTiN; Seri
• Electromagnet Lock Accessories; Type: Plug-In Transformer; For Use With: Low Voltage Electrical Equipment; Material: Plastic; Material: Plastic; For Use With: Low Voltage Electrical Equipment; Type: Plug-In Transformer; Accessory Type: Plug-In Transformer
• Square End Mill: 1/2'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2032
• Corner Radius End Mill: 0.047″ Dia, 0.07″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Corner Radius End
• LNEX130608PNERH Carbide Milling Insert Absotech Finish, 10.8mm Thick x 13mm Wide
• Corner Radius End Mill: 0.078″ Dia, 0.406″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Chucking Reamer: 0.1781″ Dia, 3.152″ OAL, 0.8274″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Series
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.4000; Finish Coating: TiCN; Serie
• Corner Radius End Mill: 0.093″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Left Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.4000; Finish Coating: TiCN; Series
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 21.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: AlTiN; Seri
• Corner Radius End Mill: 0.062″ Dia, 0.312″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Compression Spring: 0.823″ OD, 6″ Free Length 0.105″ Wire Dia, 41.357 lb Max Load, 16.876 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: M10 x 1.50, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D5 & D6, Series 4634
• Compression Spring: 1.469″ OD, 5.75″ Free Length 38.293 lb Max Load, 12.184 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.3125″ Dia, 0.75″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 40 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.062″ Dia, 0.312″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• Compression Spring: 1.586″ OD, 2.75″ Free Length 0.162″ Wire Dia, 71.102 lb Max Load, 60.293 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.528″ OD, 2.125″ Free Length 0.177″ Wire Dia, 92.973 lb Max Load, 122.901 lb/in Spring Rate, Stainless Steel
• White Double-Sided Foam Tape: 1″ Wide, 6 yd Long, 62 mil Thick, Acrylic Adhesive
• Turning Insert: RCMT 09 T3 00 4415, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.1875″ Corner Radius, N/A Round, Series RCMT (INCH)
• 6, 7 Pin Best I/C Core Cylinder Small Format IC Brass, Satin Chrome Finish
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• 6, 7 Pin Best I/C Core Cylinder Small Format IC Brass, Satin Chrome Finish
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Polyimide Film Tape: 1/2″ Wide, 100' x 1 mil Thick Non-Adhesive, -40 to 450 ° F
• Compression Spring: 1.351″ OD, 9.5″ Free Length 0.225″ Wire Dia, 193.172 lb Max Load, 86.647 lb/in Spring Rate, Stainless Steel
• Impact Socket: 1/2″ Drive 6-Point, 50 mm OAL
• Press Fit Headless Drill Bushing: HM, 5.8″ ID Steel
• Press Fit Headless Drill Bushing: HM, 6.75″ ID Steel
• CNMG643EEG AC8015P Carbide Turning Insert Absotech Finish, 0.7598″ Long, 3/4″ Inscribed Circle, 0.0472″ Corner Radius, 1/4″ Thick, 80° Included Angle, Series AC8000P
• CNMG644EEG AC8015P Carbide Turning Insert Absotech Finish, 0.7598″ Long, 3/4″ Inscribed Circle, 0.063″ Corner Radius, 1/4″ Thick, 80° Included Angle, Series AC8000P
• Ball End Mill: 0.0591″ Dia, 0.1772″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Semi-Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 4653
• Spiral Flute Tap: #10-32, UNF, 3 Flute, Bottoming, 2BX Class of Fit, Slidur Finish Right Hand Flute, Right Hand Thread, H4 & H5, Series 4655
• Compression Spring: 2.644″ OD, 6.25″ Free Length 0.225″ Wire Dia, 103.877 lb Max Load, 34.671 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.0551″ Dia, 0.0827″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Coated, Single End
• Press Fit Headless Drill Bushing: HM, 4.5″ ID Steel
• Spiral Point Tap: M6 x 1, Metric Coarse, 3 Flutes, Plug, 6H, Powdered Metal, Uncoated 3/4″ Thread Length, 2-1/2″ OAL, Right Hand, D5, Series 711
• Tapered End Mill: 10 ° per Side, 0.062″ Small Dia, 0.261″ LOC, 2 Flutes, Solid Carbide, Ball End 3/16″ Shank Dia, 2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• Tapered End Mill: 20 ° per Side, 0.062″ Small Dia, 0.261″ LOC, 2 Flutes, Solid Carbide, Ball End 3/16″ Shank Dia, 2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• Tapered End Mill: 15 ° per Side, 0.062″ Small Dia, 0.261″ LOC, 2 Flutes, Solid Carbide, Ball End 3/16″ Shank Dia, 2″ OAL, TiB2 Finish, Runner Cutters - For Non-Ferrous Materials
• WNMG432-QM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Triangle
• WNMG434-PM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 3/16″ Thick, 80° Diamond
• WNMG432-QM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Triangle
• Corner Radius End Mill: 5/16″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Corner Radius End, Centercutting, Series Flash Solid
• Grooving Insert: PENTA0.0275 IC1008, Solid Carbide TiAlN & TiN Finish, 0.7 mm Cutting Width, 2.5 mm Max Depth
• WNMG432-PF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Triangle
• Ball End Mill: 0.3125″ Dia, 1″ LOC, 4 Flute, Solid Carbide 3″ OAL, 5/16″ Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Series Flash Solid
• Scraper Replacement Blades; Product Type: Chisel; Flexibility: Flexible; Blade Material: Steel; Number Of Edges: 1; Blade Length: 25; Blade Width: 6; Blade Thickness: 1.25
• WNMG431-XF 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Triangle
• Scraper Replacement Blades; Product Type: Chisel; Flexibility: Flexible; Blade Material: Steel; Number Of Edges: 1; Blade Length: 10; Blade Width: 5; Blade Thickness: 1
• WNMG433-QM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0469″ Corner Radius, 3/16″ Thick, 80° Diamond
• WNMG431-QM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 80° Diamond
• WNMG432-PM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Trigon
• WNMG432-XM 4415 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/2″ Inscribed Circle, 0.0313″ Corner Radius, 3/16″ Thick, 80° Diamond
• Grooving Insert: PENTA17ER0007K0E IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 0.7 mm Cutting Width, 2.5 mm Max Depth, Series PentaCut
• Corner Radius End Mill: 3/8″ Dia, 7/8″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 38 & 41 ° Helix, ALtima Blaze Coated, Corner Radius End, Centercutting
• Drawer Slides; Type: Mini Drawer Slide; Extension Style: Full; Slide Length: 80.00; Travel Length: 49.00; Load Capacity (Lb.): 39.683; Additional Information: Width: 5.2 mm; Length: 129 mm; Height: 15.5 mm; Slide Length: 80.00; Material: Stainless Steel;
• Drawer Slides; Type: 2-Way Mini Drawer Slide; Extension Style: 3/4; Slide Length: 150.00; Travel Length: 94.50; Load Capacity (Lb.): 39.600; Width (Inch): 3/16; Slide Length: 150.00; Material: Stainless Steel; Material Grade: 304; Material: Stainless Stee
• Chucking Reamer: 0.2384″ Dia, 3.9794″ OAL, 1.1032″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Chamfer Mill: 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• Corner Radius End Mill: 1/2″ Dia, 1″ LOC, 0.015″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/4″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Corner Radius End Mill: 0.025″ Dia, 13/64″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Roughing End Mill 3/4X5/8X1-5/8X3-3/4 3FL COB FINE RGH EM
• Cutoff Wheel: Type 1 (01/41), 4-1/2" Dia, Diamond
• Clear Double-Sided Polyester Film Tape: 6″ Wide, 5 yd Long, 8.3 mil Thick, Acrylic Adhesive
• Spiral Flute Tap: #1-72, UNF, 2 & 3 Flute, Modified Bottoming, 3B Class of Fit, Cobalt, TICN Finish 0.276″ Thread Length, 1.772″ OAL, Right Hand Flute, Right Hand Thread, H2, Series BU459611
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Stainless Steel; Material: Stainless Steel; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Boring Bar: 0.32″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.32″ Min Bore, 1.6″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 3″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.32″ Min Bore, 2.1″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 3-1/2″ OAL, 0.006″ Corner Radius
• Boring Bar: 0.32″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 3/8″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Compression Spring: 1.351″ OD, 3″ Free Length 0.25″ Wire Dia, 251.765 lb Max Load, 514.156 lb/in Spring Rate, Stainless Steel
• CNMG542EGZ-AC4015K Carbide Turning Insert Al2O3/TiCN Finish, 16.1mm Long, 5/8″ Inscribed Circle, 0.0315″ Corner Radius, 1/4″ Thick, 80° Included Angle, Series AC4000K
• 10.4mm Head Diam, 25/64″ Shank Diam, 90° Cobalt Countersink 3-1/2″ OAL, Single End, Straight Shank, Right Hand Cut
• CNMG544EUX AC8025P Carbide Turning Insert Absotech Finish, 0.6339″ Long, 5/8″ Inscribed Circle, 0.063″ Corner Radius, 1/4″ Thick, 80° Included Angle, Series AC8000P
• Compression Spring: 1.939″ OD, 9.5″ Free Length 263.062 lb Max Load, 66.76 lb/in Spring Rate, Music Wire
• CNMG543EEM AC8015P Carbide Turning Insert Absotech Finish, 0.6339″ Long, 5/8″ Inscribed Circle, 0.0472″ Corner Radius, 1/4″ Thick, 80° Included Angle, Series AC8000P
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlCrN Coated, Corner Radius End, Centercutting, Series SAP
• 5/8″ Head Diam, 1/4″ Shank Diam, 1 Flute 82° High Speed Steel Countersink ALtima Blaze Finish, 2-1/4″ OAL
• Compression Spring: 1.586″ OD, 6″ Free Length 0.177″ Wire Dia, 89.796 lb Max Load, 35.918 lb/in Spring Rate, Stainless Steel
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Corner Radius End Mill: 1/8″ Dia, 1/8″ LOC, 0.005″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 0.3937'' Dia, 0.748'' LOC, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 1/8″ Dia, 1/4″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 0.3937'' Dia, 0.748'' LOC, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.0469″ Dia, 0.0938″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Square End Mill: 0.3937'' Dia, 0.9843'' LOC, 4 Flutes, Solid Carbide Single End, Uncoated, 60 ° Helix, Centercutting, RH Cut, RH Flute
• Drawer Slides; Type: Mini Drawer Slide; Extension Style: Full; Slide Length: 80.00; Travel Length: 49.00; Load Capacity (Lb.): 39.683; Additional Information: Width: 5.2 mm; Height: 15.5 mm; Slide Length: 80.00; Material: Stainless Steel; Material Grade:
• Horizontal Locker: Padlock Hasp
• Turning Insert: 2QP-DCMW21.51 BX360, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DCMW
• Turning Insert: 2QP-CCMW21.51 BX930, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMW
• Milling Machine Parts & Hardware 3/8″BARING RETANER RNG BRIDGEPORT/PARTS
• Turning Insert: 2QP-CCMW21.50.5 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMW
• Glass Cloth Tape; Width (Inch): 1/2; Material Type: PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 8.2000; Tensile Strength (Lb./Inch): 175.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperatur
• Square End Mill: 1/16'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Downcut Flute, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Rigid Top Plate Caster: Polypropylene, 4″ Wheel Dia, 1-1/4″ Wheel Width, 247 lb Capacity, 5″ OAH 2.375″ Plate Length, 3.63″ Plate Width, No Brake
• Turning Insert: CCMT3-1-PF IC804, Solid Carbide 0.3820″ Long, 3/8″ Inscribed Circle, N/A
• Compression Spring: 2.291″ OD, 5.25″ Free Length 0.192″ Wire Dia, 78.528 lb Max Load, 30.002 lb/in Spring Rate, Stainless Steel
• Square End Mill: 1/16'' Dia, 1/4'' LOC, 1/8'' Shank Dia, 2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 20 ° Helix, RH Cut, RH Flute
• Compression Spring: 2.585″ OD, 4.25″ Free Length 0.207″ Wire Dia, 85.282 lb Max Load, 40.916 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.644″ OD, 4.25″ Free Length 0.207″ Wire Dia, 83.454 lb Max Load, 39.584 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.093″ Dia, 9/64″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.881″ OD, 6.75″ Free Length 0.072″ Wire Dia, 13.923 lb Max Load, 3.419 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 1/16″ Dia, 3/32″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Spiral Point Tap: 5/8-11, UNC, 4 Flutes, Plug, 2B, Powdered Metal, Uncoated 1″ Thread Length, 3-13/16″ OAL, Right Hand, H6, Series 772
• Corner Radius End Mill: 3/32″ Dia, 9/64″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Duct Tape: 2″ Wide, 4.6 mil Thick, Aluminum Foil Acrylic Adhesive, 30 lb/in Tensile Strength
• Milling Inserts; Insert Style: XRAD; Insert Size: 20020; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XRAD; Coating/Finish: DLC; Width
• Double Sided Tape; Material Family: Foam; Length Range: 1 yd. - 5.9 yd.; Width (Inch): 1/2; Thickness (mil): 62.5000; Adhesive Material: Acrylic; Tensile Strength (Lb./Inch): 140.00; Maximum Operating Temperature F: 380.000
• Milling Inserts; Insert Style: XBAD; Insert Size: 200; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XBAD; Coating/Finish: DLC; Width (D
• Milling Inserts; Insert Style: XRAD; Insert Size: 20010; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XRAD; Coating/Finish: DLC; Width
• Spiral Point Tap: M3 x 0.5, DIN 371, 3 Flutes, Plug, 6HX, HSS-E-PM, TiAlN Finish 9 mm Thread Length, 56 mm OAL, Right Hand, Series T200
• Milling Inserts; Insert Style: XRAD; Insert Size: 20005; Insert Material: Solid Carbide; Material Grade: Micrograin; Thickness Range (Decimal Inch): 0.2000 to 0.2200; Length Range (Decimal Inch): 0.6000 to 0.6500; Series: XRAD; Coating/Finish: DLC; Width
• Corner Radius End Mill: 0.015″ Dia, 5/64″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.047″ Dia, 0.071″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.05″ Dia, 0.4″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Kyocera TEKN 32PTTR PR1225 Grade PVD Carbide, Triangle, Positive Rake Angle, Right-Hand Milling Insert for Roughing in (P) Free-Cutting Steel, (P) Carbon/Alloy Steel, (P) Mold Steel, (M) Stainless Steel
• Compression Spring: 1.528″ OD, 6″ Free Length 0.177″ Wire Dia, 92.973 lb Max Load, 38.551 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.3937'' Dia, 1.1811'' LOC, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 34 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.188″ Dia, 0.25″ LOC, 3 Flute, Solid Carbide 2″ OAL, 35 ° Helix, ZrN Coated, Single End, Series CoroMill Dura
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, TICN Finish 3.15″ OAL, Right Hand Flute, Right Hand Thread, H4, Series BU979000
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• 7/8″ Head Diam, 1/2″ Shank Diam, 6 Flute 90° High Speed Steel Countersink Bright Finish, 2-3/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Chucking Reamer: 0.2482″ Dia, 3.9794″ OAL, 1.1032″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• SNHJ442ENLEH KCSM40 Carbide Milling Insert AlTiN Finish, 1/2″ Long x 4.57mm Thick
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Modified Bottoming, 2B Class of Fit, Cobalt, TICN Finish 3.15″ OAL, Right Hand Flute, Right Hand Thread, H5, Series BU979000
• White Double-Sided Urethane Foam Tape: 1″ Wide, 5 yd Long, 125 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/4″ Dia, 0.2″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Door Opener Damper: 5″ Closer Body Length Cast Iron, Non-Handed
• Chamfer Mill: 5 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Square End Mill: 1/32'' Dia, 0.155'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Duct Tape: 1″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Horizontal Locker: Padlock Hasp
• Square End Mill: 3/16'' Dia, 3/4'' LOC, 3/16'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, Amorphous Diamond Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.5″ Radius, 3 Flutes, Solid Carbide 4″ Shank Dia, Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 4 Flutes, Solid Carbide 45 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0591″ Dia, 0.2953″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Turning Insert: CCGT2151FNA2QCB1, Polycrystalline Diamond Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGT
• Square End Mill: 21mm LOC, 8mm Shank Dia, 63mm OAL, 4 Flutes, Solid Carbide Single End, AlCrN Finish, Helical Flute, Variable Helix, Centercutting, RH Cut, RH Flute, Series 6479
• Corner Radius End Mill: 0.02″ Dia, 0.1″ LOC, 0.002″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: SCGT3251FNA4CB3, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 90.0 &deg N/A Square, Series SCGT
• Corner Radius End Mill: 0.0787″ Dia, 0.3937″ LOC, 3 Flutes, Solid Carbide 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 0.881″ OD, 6.5″ Free Length 0.068″ Wire Dia, 11.893 lb Max Load, 2.946 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.04'' Dia, 13/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Flute Tap: M6 x 1.00, Metric, 3 Flute, 2-3 P, 6HX Class of Fit, Powdered Metal & High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, D5
• Grooving Insert: GMG3020020MS CR9025, Solid Carbide TiCN & TiN Finish, Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• White Double-Sided Foam Tape: 3/4″ Wide, 5 yd Long, 120 mil Thick, Acrylic Adhesive
• Glass Cloth Tape; Width (Inch): 3/4; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 3.0000; Tensile Strength (Lb./Inch): 70.00; Maximum Operating Temperature (F): 500.000
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Chucking Reamer: 0.191″ Dia, 2-3/4″ OAL, 7/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute
• Corner Radius End Mill: 1/4" Dia, 1/2" LOC, 0.0900" Radius, 5 Flute, Solid Carbide
• Square End Mill: 1/64'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Right Hand Cut, Series 583
• Boring Bar: 3.5 mm Min Bore, 15 mm Max Depth, Right Hand Cut, Carbide 3.50 mm Shank Dia, 41.90 mm OAL, 0.05 mm Corner Radius
• Boring Bar: 3.5 mm Min Bore, 15 mm Max Depth, Right Hand Cut, Carbide 3.50 mm Shank Dia, 41.90 mm OAL, 0.15 mm Corner Radius
• Boring Bar: 3.5 mm Min Bore, 15 mm Max Depth, Right Hand Cut, Carbide 3.50 mm Shank Dia, 41.90 mm OAL, 0.08 mm Corner Radius
• Jobber Length Drill Bit: 0.2165″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 622
• Square End Mill: 0.1181'' Dia, 0.315'' LOC, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Boring Bar: 3.5 mm Min Bore, 15 mm Max Depth, Right Hand Cut, Carbide 3.50 mm Shank Dia, 41.90 mm OAL, 0.15 mm Corner Radius
• Boring Bar: 4 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 4 mm Shank Dia, 48.80 mm OAL, 0.15 mm Corner Radius
• Band Clamp: BCE Band Style, 0.12" Thick, Zinc-Plated Steel
• Boring Bar: 4 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 4 mm Shank Dia, 48.80 mm OAL, 0.05 mm Corner Radius
• Boring Bar: 7.5 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 74.20 mm OAL, 0.05 mm Corner Radius
• Boring Bar: 7.5 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 74.20 mm OAL, 0.15 mm Corner Radius
• Boring Bar: 7.5 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 74.20 mm OAL, 0.08 mm Corner Radius
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Boring Bar: 7.5 mm Min Bore, 35 mm Max Depth, Right Hand Cut, Carbide 7 mm Shank Dia, 74.20 mm OAL, 0.15 mm Corner Radius
• Milling Insert: XDLX 09T308SR-M50 CTCP220, CTCP220, Solid Carbide N/A Finish,
• Ball End Mill: 0.375″ Dia, 1.5″ LOC, 4 Flute, Solid Carbide 6″ OAL, 3/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 3/8'' Dia, 7/8'' LOC, 3/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• 4-1/2″ Long x 4-1/2″ Wide Grade 1 Bronze Full Mortise Ball Bearing Commercial Hinge Oil Rubbed Bronze Finish, 5 Knuckles, 8 Holes
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Turning Insert: VCGW221TN012DA5, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Impact Socket: 1/2″ Drive 6-Point
• Turning Insert: VCGW2205TN012DA5, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 26.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 45.7000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 30.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 50.7000; Finish Coating: TiCN; Serie
• Turning Insert: VCGW222TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Plug Thread Gage: M12x1.50 Thread, 6H Class, Go
• Plug Thread Gage: M12x1.50 Thread, 6H Class, No Go
• Turning Insert: VCGW221FN_A5 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW222FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Turning Insert: VCGW222FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Glass Cloth Tape; Width (Inch): 1/4; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• Turning Insert: VCGW2205TN012DA5, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Slip-Fixed Bushing: SF, 1″ Body OD Carbon Steel
• Turning Insert: VCGW221TN012DA5, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Compression Spring: 1.88″ OD, 9.5″ Free Length 0.162″ Wire Dia, 60.499 lb Max Load, 12.299 lb/in Spring Rate, Stainless Steel
• O-Ring: 6-3/4″ ID x 7-1/8″ OD, 3/16″ Thick, Dash 364, HNBR Round Cross Section
• Turning Insert: VCGW2205TN012EA5, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• O-Ring: 1-1/2″ ID x 1-7/8″ OD, 3/16″ Thick, Dash 325, HNBR Round Cross Section
• Turning Insert: VCGW220.5FN_A5 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Square End Mill: 5/32'' Dia, 1-1/4'' LOC, 3/16'' Shank Dia, 3'' OAL, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Turning Insert: VCGW221FN_A5 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Ball End Mill: 0.3125″ Dia, 0.5″ LOC, 3 Flute, Solid Carbide 2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Corner Radius End Mill: 1/64″ Dia, 0.023″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting
• Ball End Mill: 0.1875″ Dia, 0.75″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 3/16″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• Double Angle Milling Cutter: 90 °, 1/8″ Cut Dia, 1/16″ Cut Width, 1″ Shank Dia, Solid Carbide 1-1/2″ OAL, AlTiN Nano Coated, 6 Teeth
• Ball End Mill: 0.035″ Dia, 0.105″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Undercutting End Mills; Mill Diameter (Inch): 3/16; Overall Length (Inch): 2; Radius: 0.0938; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 0.1875; Shank Diameter (Inch): 3/
• Band Clamp: BCE Band Style, 0.12" Thick, Zinc-Plated Steel
• Ball End Mill: 0.062″ Dia, 0.093″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated, Single End
• Boring Bar: 0.29″ Min Bore, 1-1/4″ Max Depth, Right Hand Cut, Solid Carbide 5/16″ Shank Dia, 2-1/2″ OAL, 0.005″ Corner Radius
• Corner Radius End Mill: 3/8″ Dia, 1-1/4″ LOC, 0.03″ Radius, 5 Flutes, Solid Carbide 3″ OAL, 3/8″ Shank Dia, 36 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Ball End Mill: 0.093″ Dia, 0.279″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• White Double-Sided Foam Tape: 1/2″ Wide, 5 yd Long, 45 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.093″ Dia, 0.074″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 45 ° Helix, TiB2 Coated, Single End
• Double Angle Milling Cutter: 45 °, 1/8″ Cut Dia, 1/16″ Cut Width, 1/8″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Coated, 4 Teeth
• Corner Radius End Mill: 1/4″ Dia, 3/8″ LOC, 0.06″ Radius, 3 Flutes, Solid Carbide 4″ OAL, 1″ Shank Dia, Helix, Amorphous Diamond Coated, Corner Radius End, Centercutting
• White Double-Sided PVC & Foam Tape: 1″ Wide, 5 yd Long, 31.25 mil Thick, Acrylic Adhesive
• Translucent Double-Sided UPVC Tape: 1″ Wide, 36 yd Long, 8.5 mil Thick, Acrylic Adhesive
• Spiral Point Tap: M5 x 0.8, Metric, Plug, 6H, Cobalt, Bright Finish Right Hand, D4, Series C0208900
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Decimal Inch): 0.3940; Length of Cut (mm): 12.4000; Connection Type: E10; Overall Length (Inch): 0.9290; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50; Cutting Direction: Right Ha
• Corner Radius & Corner Chamfer End Mill Heads; Mill Diameter (Inch): 3/8; Mill Diameter (Decimal Inch): 0.3750; Length of Cut (Inch): 0.4880; Connection Type: E10; Overall Length (Inch): 0.9290; Flute Type: Spiral; Material Grade: WJ30TF; Helix Angle: 50;
• Black Double-Sided PVC & Foam Tape: 1″ Wide, 5 yd Long, 31.25 mil Thick, Acrylic Adhesive
• Grooving Insert: TDTT TT7220, Solid Carbide TiCN Finish, Neutral, 0.094″ Cutting Width, Series TDT