Products

• Spiral Flute Tap: M12 x 1.75, Metric, 3 Flute, Semi-Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D8 & D9,Series 0393
• Turning Insert: 2QP-VCGW332-LT BX815, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VCGW
• Jobber Length Drill Bit: 0.368″ Dia, 118 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Turning Insert: 2QP-VBMW331 BX330, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMW
• Press Fit Headless Drill Bushing: P, 1-1/32″ ID, 1-3/8″ OD 2-1/8″ OAL, Carbon Steel
• DNMG333EEG AC8015P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG332EEG AC8015P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG331EEF AC8015P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG331EFE AC8025P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG332EFE AC8025P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG333EFE AC8025P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG333EEG AC8025P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0472″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG331EGU AC8015P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• DNMG332EEG AC8025P Carbide Turning Insert Absotech Finish, 0.4567″ Long, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 55° Included Angle, Series AC8000P
• Boring Bar: 5 mm Min Bore, 2 mm Max Depth, Right Hand Cut, Carbide 5 mm Shank Dia, 52.70 mm OAL, 0.15 mm Corner Radius
• Compression Spring: 0.764″ OD, 8″ Free Length 0.092″ Wire Dia, 31.069 lb Max Load, 8.677 lb/in Spring Rate, Stainless Steel
• Compression Spring: 0.764″ OD, 3″ Free Length 0.148″ Wire Dia, 108.365 lb Max Load, 195.062 lb/in Spring Rate, Stainless Steel
• Screw Machine Length Drill Bit: 0.5469″ Dia, 135 °, Cobalt TiCN Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 2175N
• Spiral Flute Tap: 3/4-10, UNC, 4 Flute, Modified Bottoming, High Speed Steel, Bright/Uncoated 2″ Thread Length, 4.25″ OAL, Right Hand Flute, Right Hand Thread, H11, Series SFGP+5
• Turning Insert: CNMG431MT TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• CNMG432MC TT5100 Carbide Turning Insert 0.472″ Long, 1/2″ Inscribed Circle, 1/32″ Corner Radius, 80° Diamond
• Turning Insert: CNMG431MT TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMG432FG TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMG431FG TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.1406″ Dia, 0.425″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3″ Shank Dia, Helix, Bright/Uncoated, Corner Radius End, Centercutting
• CNMG432RT TT5100 Carbide Turning Insert 1/2″ Inscribed Circle, 1/32″ Corner Radius, 80° Diamond
• Impact Socket: 3/4″ Drive 6-Point
• Turning Insert: CNMG433MT TT8020, Solid Carbide TiCN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Spiral Flute Tap: 1/4-28, UNF, 3 Flute, Semi-Bottoming, 2B Class of Fit, High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, Series TC115
• Turning Insert: CNMG433MT TT7100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.1562″ Dia, 0.469″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CNMG432PC TT9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• O-Ring: 1.725″ ID x 2.145″ OD, 0.21″ Thick, Dash 327, Nitrile Butadiene Rubber Round Cross Section
• Turning Insert: CNMG433ML TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.1181″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Turning Insert: CNMG120408MP TT9080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.1562″ Dia, 0.235″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Polytetrafluroethylene Film Tape: 1″ Wide, 5 yd Long, 3.7 mil Thick 22 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Corner Radius End Mill: 3/16″ Dia, 0.285″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Full Barrel Manual Caulk & Adhesive Applicator: 20 oz Black & White, Use with Milwaukee M18 Cordless Caulk & Adhesive Gun
• Turning Insert: CNMG431EA TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 3/16″ Dia, 9/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: CNMG432ET TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Ball End Mill: 0.031″ Dia, 0.156″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Uncoated, Single End
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Stainless Steel; Material: Stainless Steel; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Turning Insert: CNMG432ML TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Electromagnet Lock Accessories; Type: Armor Door Loop; For Use With: Electric Locks; Material: Aluminum; Material: Aluminum; For Use With: Electric Locks; Type: Armor Door Loop; Accessory Type: Armor Door Loop; Type: Armor Door Loop
• Square End Mill: 1/4'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2032
• Turning Insert: CNMG431MP TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Ball End Mill: 0.04″ Dia, 0.06″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated
• Compression Spring: 2.115″ OD, 3.25″ Free Length 0.225″ Wire Dia, 128.373 lb Max Load, 104.41 lb/in Spring Rate, Stainless Steel
• Turning Insert: CNMG433MP TT9235, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.05″ Dia, 1/4″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Compression Spring: 2.468″ OD, 5.25″ Free Length 0.207″ Wire Dia, 124.287 lb Max Load, 40.01 lb/in Spring Rate, Music Wire
• CNMG120408RT TT9225 Carbide Turning Insert 3/16″ Thick, 80° Diamond
• GN352-50-50-M10-S-40 RUBBER BUMPER
• Corner Radius End Mill: 0.06″ Dia, 5/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Turning Insert: CNMG431MT TT8020, Solid Carbide TiCN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: CNMG432ML TT9080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Horizontal Locker: Padlock Hasp
• Turning Insert: CNMG432MP TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Spiral Flute Tap: 5/16-18, 4-5 P, LK Class of Fit, HSS-E, Bright/Uncoated Right Hand Flute, Right Hand Thread, BT
• Turning Insert: CNMG432ML TT9215, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.06″ Dia, 0.18″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Turning Insert: CNMG432WT TT7005, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.047″ Dia, 1/4″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Corner Radius End
• Turning Insert: CNMG432WT TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Square End Mill: 7/16'' Dia, 5/8'' LOC, 7/16'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide AlCrN Finish, 35 ° Helix, Centercutting, Series SAP
• Ball End Mill: 0.0787″ Dia, 0.1181″ LOC, 4 Flute, Solid Carbide 63 mm OAL, 4 mm Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Jobber Length Drill Bit: 0.1654″ Dia, 130 °, Powdered Metal FIREX Finish, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• CNMG431ML TT9225 Carbide Turning Insert 1/2″ Inscribed Circle, 1/64″ Corner Radius, 80° Diamond
• Ball End Mill: 0.039″ Dia, 0.059″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: CNMG432PC TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• DNMG331-QM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 3/8″ Inscribed Circle, 0.0156″ Corner Radius, 3/16″ Thick, 55° Triangle
• Turning Insert: CNMG432MT TT9215, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: DNMG 11 04 08-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Back Chamfers; Cutter Head Diameter (Decimal Inch): 0.1250 in; Included Angle: 90.00; Number of Flutes: 5; Chamfer Width (Decimal Inch): 0.0220 in; Chamfer Width: 0.0220 in; Back Chamfer Material: Solid Carbide; Overall Length (Inch): 1.50; Coated: Coated
• Turning Insert: WNMG 08 04 16-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series WNMG-MR (ISO P)
• Turning Insert: CNMG433MP TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Ball End Mill: 0.031″ Dia, 0.047″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Turning Insert: CNMG432ML TT8080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.5080″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Turning Insert: WNMG 08 04 12-MR 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series WNMG-MR (ISO P)
• Turning Insert: WNMG 08 04 04-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series WNMG-PMC
• Turning Insert: WNMG 08 04 12-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series WNMG-PMC
• Turning Insert: WNMG 08 04 08-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series WNMG-PMC
• Square End Mill: 5/16'' Dia, 1-1/4'' LOC, 5/16'' Shank Dia, 3-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Turning Insert: DNMG 11 04 04-PMC 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-PMC
• Square End Mill: 1/4'' Dia, 1'' LOC, 1/4'' Shank Dia, 3'' OAL, 6 Flutes, Solid Carbide Single End, EXO Finish, Helical Flute, 37 ° Helix, RH Cut, RH Flute, Series VGM6
• Turning Insert: DNMG 11 04 12-MF 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Turning Insert: WNMG 08 04 16-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series WNMG-MR (ISO P)
• White Double-Sided Polyethylene Foam Tape: 1″ Wide, 62 mil Thick, Rubber Adhesive
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Turning Insert: CNMU 12 06 12-PM 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series CNMU-PM
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Turning Insert: WNMG 08 04 12-XMR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series WNMG-XMR
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Turning Insert: WNMG 08 04 12-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series WNMG-MR (ISO P)
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Turning Insert: WNMG 08 04 08-MR 4415, TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series WNMG-MR (ISO P)
• Internal Boring Bar: 0.315″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Turning Insert: DNMG 11 04 04-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-PMC
• Jobber Length Drill Bit: 0.2188″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Right Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Jobber Length Drill Bit: 0.2244″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Turning Insert: WNMG 08 04 12-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series WNMG-PMC
• Turning Insert: CNMU 12 06 12-PM 4425, TiCN, Al2O3 & TiN Finish, Neutral, 0.0469″ Corner Radius, N/A Series CNMU-PM
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0079″ Corner Radius
• Jobber Length Drill Bit: 0.2441″ Dia, 130 °, High Speed Steel Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 549
• Turning Insert: DNMG 11 04 08-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-PMC
• Internal Boring Bar: 0.2756″ Min Bore, 0.6693″ Max Depth, Left Hand Cut, Carbide 1.6535″ OAL, 0.0039″ Corner Radius
• Turning Insert: CNMU 12 06 16-PR 4425, TiCN, Al2O3 & TiN Finish, Neutral, 0.0625″ Corner Radius, N/A Series CNMU-PR
• 3.6mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Turning Insert: WNMG 08 04 08-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series WNMG-PMC
• Press Fit Headed Drill Bushing: Type H, #31 ID, 1/4″ OD
• Press Fit Headed Drill Bushing: Type H, 9/16″ ID, 1″ OD
• Turning Insert: DNMG 11 04 08-MF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Press Fit Headless Drill Bushing: P, 17/32″ ID, 3/4″ OD 1-3/4″ OAL, Carbon Steel
• Turning Insert: WNMG 08 04 04-PMC 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series WNMG-PMC
• Square End Mill: 3/8'' Dia, 2-1/2'' LOC, 3/8'' Shank Dia, 6'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Turning Insert: DNMG 11 04 04-MF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series DNMG-MF (ISO P)
• Key Machines
• Masking Tape: 60 yd Long, 6.7 mil Thick, White Paper, Rubber Adhesive, 20 lb/in Tensile Strength
• Clear Double-Sided Acrylic Tape: 1/2″ Wide, 40 mil Thick, Acrylic Adhesive
• Combination Wrench: 31CrV3 Vanadium Steel, Chrome-Plated
• Duct Tape: 1″ Wide, 3.5 mil Thick, Aluminum Foil Silicone Adhesive, 20 lb/in Tensile Strength
• Compression Spring: 2.056″ OD, 8″ Free Length 0.177″ Wire Dia, 95.708 lb Max Load, 19.65 lb/in Spring Rate, Music Wire
• Square End Mill: 3/16'' Dia, 5/8'' LOC, 3/16'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Clear Double-Sided Acrylic Tape: 1/2″ Wide, 40 mil Thick, Acrylic Adhesive
• Spiral Point Tap: M4 x 0.7, Metric, 2 Flutes, Plug, High Speed Steel, Bright Finish 3/4″ Thread Length, 2-1/8″ OAL, Right Hand, D11, Series SPGP+5
• Glass Cloth Tape; Width (Inch): 1; Material Type: Fiberglass; PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 5.00; Thickness (mil): 11.7000; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature (F): 500.000
• 3.2mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• 3.3mm, 165° Drill Point, 1/8″ Shank Diam, Fast Spiral Circuit Board Drill Bit 12.2mm Flute Length, 38mm OAL, Series 306
• Square End Mill: 0.034'' Dia, 0.051'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.41″ OD, 4.5″ Free Length 0.135″ Wire Dia, 48.941 lb Max Load, 22.009 lb/in Spring Rate, Stainless Steel
• Tapered End Mills; Mill Diameter (Decimal Inch): 0.1250; Length of Cut (Inch): 5/8; Taper Angle Per Side: 5.00; End Mill Material: Solid Carbide; End Shape: Square; Flute Type: Spiral; Overall Length (Decimal Inch): 2.0000; Overall Length (Inch): 2; Cente
• Screw Machine Length Drill Bit: 0.2031″ Dia, 135 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Square End Mill: 0.028'' Dia, 0.084'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Spiral Point Tap: 7/16-14, UNC, 3 Flutes, Plug, 2BX, Slidur Finish 100 mm OAL, Right Hand, H6/H7, Series 4658
• Model 50 Fits-All-Pump
• Square End Mill: 0.032'' Dia, 0.096'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.027'' Dia, 0.081'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• UHMW Film Tape: 3/4″ Wide, 5 yd Long, 20 mil Thick 145 Lb/In Tensile Strength, Acrylic Adhesive, 225 ° F
• Spiral Flute Tap: #0-80, UNF, 2 Flute, Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 1.626″ OAL, Right Hand Flute, Right Hand Thread, H2, Series BU51C400
• Jobber Length Drill Bit: 0.1661″ Dia, 130 °, Powdered Metal FIREX Finish, 2.95″ OAL, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series 530
• Spiral Point Tap: M8 x 1.25, M & Metric, 3 Flutes, Plug, 6H, HSS-E, GLT-1 Finish 3.5433″ OAL, Right Hand, D5, Series B020C300
• Square End Mill: 1/4'' Dia, 3/8'' LOC, 1/4'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 1026 & Alumigator
• Grooving Insert: TDXTT CT3000, Cermet Uncoated, Neutral, 0.118″ Cutting Width, Series TDXT-E
• Press Fit Headed Drill Bushing: Type H, 21/64″ ID, 1/2″ OD
• White Double-Sided Polyester Film Tape: 2″ Wide, 25 yd Long, 8.5 mil Thick, Acrylic Adhesive
• Corner Radius End Mill: 1/16″ Dia, 0.05″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Rounding End Mill: 0.06″ Radius, 3/16″ Diam, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, AlTiN Finish, Double End
• Polyethylene Film Tape: 1″ Wide, 5 yd Long, 9.8 mil Thick 15 Lb/In Tensile Strength, Rubber Adhesive, 20 to 170 ° F
• Tapered End Mill: 5 ° per Side, 3/32″ Small Dia, 3 Flutes, Solid Carbide, Square End 1/4″ Shank Dia, 4″ OAL, Uncoated, Series Miniature End Mills - Tapered - Square
• Corner Radius End Mill: 3/32″ Dia, 0.074″ LOC, 1/64″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.045″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2010
• Chucking Reamer: 0.166″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, Cobalt 6 Flute
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.02″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2010
• Chucking Reamer: 0.173″ Dia, 4-1/2″ OAL, 1-1/8″ Flute Length, Straight Shank, Cobalt 6 Flute
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.03″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2010
• Adhesive Transfer Tape; Adhesive Material: Acrylic; Width (Inch): 1/2; Length (yd): 5.00; Thickness (mil): 2.3000; Minimum Operating Temperature (F): -40.000; Maximum Operating Temperature (F): 400.000; Color: Clear; Liner Material: Kraft Paper; Series: 4
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.045″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2030
• Spiral Flute Tap: 7/16-14 , 3 Flute, Bottoming, 3B Class of Fit, Cobalt, Nitride Finish Left Hand Flute, Right Hand Thread, H5, Series 13019
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.02″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• O-Ring: 0.88″ ID x 1.38″ OD, 0.22″ Thick, Silicone with SS Screen Round Cross Section
• Corner Radius End Mill: 3/16″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Ball End Mill: 0.6299″ Dia, 1.2598″ LOC, 2 Flute, Solid Carbide Uncoated
• Ball End Mill: 0.6299″ Dia, 1.2598″ LOC, 2 Flute, Solid Carbide ZrN Coated
• Corner Radius End Mill: 0.02″ Dia, 0.03″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.02″ Dia, 0.03″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: RCMX 25 07 00 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.4921″ Corner Radius, N/A Series RCMX
• Glass Cloth Tape; Width (Inch): 1/2; Material Type: PTFE; Color: Natural; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 5.0000; Tensile Strength (Lb./Inch): 120.00; Maximum Operating Temperature (F): 500.000
• Turning Insert: RCGX665S6015 KYHK15B, Ceramic AlTiN Finish, Neutral, 3/4″ Inscribed Circle, N/A Round, Series RCGX
• Corner Radius End Mill Head: 1/8″ Dia, 1/2″ LOC, 4 Flutes Solid Carbide, AlCrN Coated, Series XPV
• Turning Insert: RCGX665P8015 KYHK15B, Ceramic AlTiN Finish, Neutral, 3/4″ Inscribed Circle, N/A Round, Series RCGX
• Spiral Flute Tap: M2.50 x, 0.45, M, 2 Flute, Modified Bottoming, 6H Class of Fit, Cobalt, NT2 Finish Right Hand Flute, Right Hand Thread, D3, Series B0456001
• Corner Radius End Mill: 0.025″ Dia, 0.037″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Milling Insert: KDMT0250SRHF, KCPK25, Cast Iron & Steel N/A Finish, 0.2500″ OAW
• Corner Radius End Mill Head: 5 Flutes Solid Carbide
• Milling Insert: KDMT0312SRHF, KCPK25, Cast Iron & Steel N/A Finish, 0.3125″ OAW
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 6.200; Material Grade: Submicron; Maximum Bore Depth (mm): 30.00; Shank Diameter (mm): 6.0000; Overall Length (mm): 56.0000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 5.200; Material Grade: Submicron; Maximum Bore Depth (mm): 30.00; Shank Diameter (mm): 5.0000; Overall Length (mm): 55.0000; Finish Coating: TiCN; Serie
• Corner Radius End Mill: 3/16″ Dia, 3/4″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 38 ° Helix, nACo Coated, Corner Radius End, Centercutting, Series 1035
• Saw Machine Parts & Accessories; Accessory Type: Chip Brushes; For Use With: AH250H, AH300H & AH400H; For Use With: AH250H, AH300H & AH400H
• Compression Spring: 0.881″ OD, 6″ Free Length 0.068″ Wire Dia, 11.893 lb Max Load, 3.197 lb/in Spring Rate, Stainless Steel
• O-Ring: 2″ ID x 2.63″ OD, 1/4″ Thick, Nitrile Butadiene Rubber Round Cross Section
• Impact Socket: 3/4″ Drive 6-Point
• Compression Spring: 1.116″ OD, 5.5″ Free Length 0.112″ Wire Dia, 37.008 lb Max Load, 13.434 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.375″ Dia, 0.875″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 45 ° Helix, AlTiN Coated, Single End, Series XPB-NB
• Kyocera VCGW 151505T00315ME KBN05M Grade CBN, 7 Degree, Diamond, Positive Rake Angle, Neutral Turning Insert for Continuous and Finishing-Medium in (H) Hardened Materials
• Milling Insert: SNHU 120408SR-M50 CTCP230, CTCP230, Solid Carbide N/A Finish,
• Kyocera VNGA 331S00525ME KBN60M Grade CBN, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Finishing-Medium in (K) Nodular Cast Iron
• Horizontal Locker: Padlock Hasp
• Milling Insert: SNHU 120420SR-R50 CTCK215, CTCK215, Solid Carbide N/A Finish,
• Kyocera VNGA 3305S00525ME KBN35M Grade Honeycomb CBN, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Heavy Interruption and Roughing in (H) Hardened Materials
• Milling Insert: SNHU 120420FR-F10 CTWN215, CTWN215, Solid Carbide N/A Finish,
• Combo Drill & Countersink: Metric, High Speed Steel TiN Finish, Right Hand Cut, Series 613
• Kyocera VNGA 3305S00525ME KBN10M Grade CBN, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing in (H) Hardened Materials
• Milling Insert: SNHU 120416SR-R50 CTCK215, CTCK215, Solid Carbide N/A Finish,
• Kyocera VNGA 332S00525ME KBN475 Grade CBN, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Continuous and Finishing in (K) Nodular Cast Iron
• File or Paper Mailer: 11-5/8″ OAW, 9-3/4″ OAL
• Chucking Reamer: 0.1812″ Dia, 3.152″ OAL, 0.8274″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• SpyroTec 1/4″ Head Diam, 0.06″ Cut Diam, 1/4″ Shank Diam, 3 Flute 82° Cobalt Countersink TiAlN Finish, 2″ OAL, Single End, 1/4″ 3-Flat Shank, Right Hand Cut
• Milling Insert: SNHU 120412SR-R50 CTCK215, CTCK215, Solid Carbide N/A Finish,
• Milling Insert: AH3135, Solid Carbide N/A Finish,
• VBGW160402T00815ME Honeycomb CBN Turning Insert Megacoat Finish, Neutral, 3/8″ Inscribed Circle, 0.0079″ Corner Radius, 0.1874″ Thick, 35° Diamond, Series KBN
• Turning Insert: DNMG432-27 T9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Kyocera VNGA 331MET KBN525 Grade CBN, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Light Interruption and Medium in (H) Hardened Materials
• Kyocera VNGA 331T00515ME KBN70M Grade CBN, 0 Degree, Diamond, Negative Rake Angle, Neutral Turning Insert for Heavy Interruption and Finishing-Medium in Powdered Steel
• Corner Radius End Mill: 0.031″ Dia, 0.025″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.200; Material Grade: Submicron; Maximum Bore Depth (mm): 14.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Corner Radius End Mill: 1/16″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 40 ° Helix, AlTiN+ Coated, Corner Radius End, Centercutting, Series 6/44
• Corner Radius End Mill: 0.031″ Dia, 3/32″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• VNGA160408S01225ME Honeycomb CBN Turning Insert Megacoat Finish, Neutral, 3/8″ Inscribed Circle, 0.0315″ Corner Radius, 0.1874″ Thick, 35° Diamond, Series KBN
• Ball End Mill: 0.0394″ Dia, 0.0315″ LOC, 2 Flute, Solid Carbide 63 mm OAL, 6 mm Shank Dia, 20 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.1875″ Dia, 0.625″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.700; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Grooving Insert: TDXUXU-Universal CT3000, Cermet Uncoated, Neutral, 0.118″ Cutting Width, Series TDXU-E
• Milling Insert: AH3135, Solid Carbide N/A Finish,
• Press Fit Headless Drill Bushing: HM, 19″ ID Steel
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Ball End Mill: 0.1875″ Dia, 0.625″ LOC, 4 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 10.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 28.5000; Finish Coating: TiCN; Serie
• Compression Spring: 2.233″ OD, 6.5″ Free Length 0.192″ Wire Dia, 110.918 lb Max Load, 28.549 lb/in Spring Rate, Music Wire
• Duct Tape: 3″ Wide, 5 mil Thick, Stainless Steel Acrylic Adhesive, 150 lb/in Tensile Strength
• Spiral Point Tap: 1/2-20, UNF, 3 Flutes, Plug, 2B, High Speed Steel, TiCN Finish 1.6562″ Thread Length, 3-3/8″ OAL, Right Hand, H3, Series SPGP
• Compression Spring: 0.823″ OD, 9.5″ Free Length 0.162″ Wire Dia, 172.573 lb Max Load, 82.649 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 0.093″ Dia, 0.074″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 20 ° Helix, AlTiN Coated, Corner Radius End
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 2.700; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Woodruff Keyseat Cutter: 0.3125″ Cut Dia, 0.056″ Cut Width, 5/16″ Shank Dia, Straight Tooth 2-1/2″ OAL, 6 Teeth, Solid Carbide
• Compression Spring: 0.881″ OD, 8.5″ Free Length 0.092″ Wire Dia, 27.195 lb Max Load, 6.298 lb/in Spring Rate, Stainless Steel
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Compression Spring: 0.881″ OD, 4″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 45.603 lb/in Spring Rate, Stainless Steel
• Square End Mill: 0.0984'' Dia, 0.2953'' LOC, 7 Flutes, Solid Carbide Single End, AlTiN Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Turning Insert: VBMT330.5PS T6120, Solid Carbide TiCN & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 35.0 &deg N/A Diamond, Series VBMT
• Compression Spring: 1.293″ OD, 6″ Free Length 0.192″ Wire Dia, 184.509 lb Max Load, 88.693 lb/in Spring Rate, Music Wire
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Corner Radius End Mill: 0.1562″ Dia, 3/4″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 3″ OAL, 3/16″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.41″ OD, 6″ Free Length 0.192″ Wire Dia, 170.609 lb Max Load, 72.701 lb/in Spring Rate, Music Wire
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.200; Material Grade: Submicron; Maximum Bore Depth (mm): 20.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 39.8000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 3.700; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 4.200; Material Grade: Submicron; Maximum Bore Depth (mm): 15.00; Shank Diameter (mm): 4.0000; Overall Length (mm): 35.2000; Finish Coating: TiCN; Serie
• Ball End Mill: 0.0591″ Dia, 0.0866″ LOC, 3 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 34 ° Helix, AlTiN Coated, Single End