Products

• Chamfer Mill: 5 Flutes, Solid Carbide 3″ OAL, 1/8″ Shank Dia, AlTiN Coated
• Square End Mill: 3/32'' Dia, 3/16'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Spiral Flute, Centercutting, RH Cut, RH Flute, Series 169
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.005″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Micro Boring Bar: 0.0405″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 1/8″ Shank Dia, 1-1/2″ OAL
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.03″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 1/64'' Dia, 13/64'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.116″ OD, 6.5″ Free Length 0.177″ Wire Dia, 168.625 lb Max Load, 81.356 lb/in Spring Rate, Music Wire
• Corner Radius End Mill: 1/8″ Dia, 3/16″ LOC, 0.01″ Radius, 7 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 41 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius & Corner Chamfer End Mill Heads; Chamfer Angle: 45.000; Connection Type: Duo-Lock 12; Centercutting: Yes; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Overall Length: 0.59
• Corner Radius & Corner Chamfer End Mill Heads; Connection Type: Duo-Lock 16; Centercutting: Yes; Flute Type: Helical; Series: Haimer Mill; Number Of Flutes: 8; Overall Length: 1.26
• CNMG642MT TT8020 Carbide Turning Insert 0.728″ Long, 3/4″ Inscribed Circle, 1/32″ Corner Radius, 80° Diamond
• Corner Radius End Mill: 0.2362″ Dia, 0.5118″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 4 Flute, 0.0157″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated
• Corner Chamfer End Mill: 0.7874″ Dia, 1.4961″ LOC, 4 Flute, 0.0236″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated, Centercutting
• Turning Insert: CNMG643RT TT7015, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.7600″ Long, 3/4″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.1969″ Dia, 0.5118″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 1.175″ OD, 9″ Free Length 0.092″ Wire Dia, 20.675 lb Max Load, 3.806 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.7087″ Dia, 2.126″ LOC, 4 Flute, 0.0142″ Chamfer Width, Solid Carbide 4.84 mm OAL, AlTiN Coated, Centercutting
• Turning Insert: CNMG643ML TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.7600″ Long, 3/4″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Corner Radius End Mill: 0.3937″ Dia, 0.8661″ LOC, 0.1″ Radius, 4 Flutes, Solid Carbide 2.87″ OAL, 0.3937″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TQC27
• Grooving Insert: TDAA K10, Solid Carbide Uncoated, Neutral, 0.188″ Cutting Width, Series TDA
• Corner Chamfer End Mill: 0.75″ Dia, 2.25″ LOC, 4 Flute, 0.015″ Chamfer Width, Solid Carbide 5″ OAL, 3/4″ Shank Dia, AlTiN Coated, Centercutting
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.094″ Cutting Width, Series TQC27
• Corner Chamfer End Mill: 0.4606″ Dia, 1.0236″ LOC, 4 Flute, 0.0094″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.315″ Dia, 0.9449″ LOC, 5 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.76 mm OAL, AlTiN Coated
• Grooving Insert: TQCC TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.062″ Cutting Width, Series TQC27
• Screw Machine Length Drill Bit: 0.18″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 205
• Corner Chamfer End Mill: 0.2362″ Dia, 0.7087″ LOC, 5 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.44 mm OAL, AlTiN Coated
• Ball End Mill: 0.0197″ Dia, 0.0276″ LOC, 2 Flute, Solid Carbide 37.5 mm OAL, 3 mm Shank Dia, 20 ° Helix, nACRo Coated, Single End
• Grooving Insert: TQJJ TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.079″ Cutting Width, Series TQJ27
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 5 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated
• Grooving Insert: TQJJ TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.062″ Cutting Width, Series TQJ27
• Corner Chamfer End Mill: 0.7087″ Dia, 1.2598″ LOC, 4 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1/2″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Dovetail Cutter: 4 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Chamfer End Mill: 0.3937″ Dia, 1.1811″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.23 mm OAL, AlTiN Coated
• Dovetail Cutter: 4 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Socket Extensions; Tool Type: Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 9.5700; Material: Steel
• Corner Chamfer End Mill: 0.2362″ Dia, 0.5118″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.28 mm OAL, AlTiN Coated, Centercutting
• Dovetail Cutter: 2 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Compression Spring: 2.115″ OD, 4.5″ Free Length 0.207″ Wire Dia, 143.961 lb Max Load, 60.7 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 5 Flute, 0.0118″ Chamfer Width, Solid Carbide 2.87 mm OAL, AlTiN Coated
• Dovetail Cutter: 6 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Radius End Mill: 0.0938″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 1/4″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Dovetail Cutter: 2 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Chamfer End Mill: 0.5″ Dia, 1.5″ LOC, 4 Flute, 0.01″ Chamfer Width, Solid Carbide 4″ OAL, 1/2″ Shank Dia, AlTiN Coated, Centercutting
• Milling Insert: NS740, Cermet N/A Finish,
• Dovetail Cutter: 1 °, 1/16″ Cut Dia, 3/32″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2.188″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Combo Drill & Countersink: #00, 1/8″ Body Dia, 118 ™, Solid Carbide AlTiN Finish, 1-1/2″ OAL, Right Hand Cut, Series Combined Drill & Countersinks
• Corner Radius End Mill: 0.0787″ Dia, 0.0984″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Chamfer End Mill: 0.7874″ Dia, 1.4961″ LOC, 4 Flute, 0.0236″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated, Centercutting
• Dovetail Cutter: 6 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• FFX4 XNMU IC808 Carbide Milling Insert TiAlN/AlTiN/TiN Finish, 9.58mm Long x 9.05mm Thick x 7.16mm Wide
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 5 Flute, 0.0157″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated
• Dovetail Cutter: 4 °, 3/32″ Cut Dia, 0.139″ Cut Width, Solid Carbide 1/8″ Shank Dia, 2″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Radius End Mill: 0.4724″ Dia, 1.0236″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.31″ OAL, 0.4724″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Dovetail Cutter: 1 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 4 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated, Centercutting
• Square End Mill: 3/16'' Dia, 0.563'' LOC, 3/16'' Shank Dia, 2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 42 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Dovetail Cutter: 2 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Kyocera PNEG 1106XNTRT00515 CS7050 Grade CVD Ceramic, Pentagon, Negative Rake Angle, Right-Hand Milling Insert for Roughing in (K) Nodular Cast Iron and (K) Gray Cast Iron
• Corner Chamfer End Mill: 0.7087″ Dia, 1.2598″ LOC, 5 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated
• Dovetail Cutter: 6 °, 1/8″ Cut Dia, 3/16″ Cut Width, Solid Carbide 1/8″ Shank Dia, 1.875″ Shank Length, 2-1/2″ OAL, 4 Teeth, Uncoated
• Corner Chamfer End Mill: 0.315″ Dia, 0.748″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 2.52 mm OAL, AlTiN Coated, Centercutting
• Grooving Insert: PENTA17N100P050P IC1008, Solid Carbide TiAlN & TiN Finish, Right Hand, 1 mm Cutting Width, 3 mm Max Depth, Series PentaCut
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• All-Purpose & Utility Hooks; Overall Length (Inch): 2-23/64; Finish/Coating: Gray; Black; Maximum Load Capacity: 44.00; Additional Information: Width: 20 mm; Height:60 mm; Minimum Order Quantity: Aluminum; Type: Recessed Hook; Material: Aluminum; Type: Re
• Grooving Insert: TQJJ TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.094″ Cutting Width, Series TQJ27
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Grooving Insert: YG602, Solid Carbide TiAlN Finish, Neutral, 0.157″ Cutting Width
• Ball End Mill: 0.093″ Dia, 0.074″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, TiB2 Coated, Single End
• Screw Machine Length Drill Bit: 0.147″ Dia, 135 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Straight-Cylindrical Shank
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Screw Machine Length Drill Bit: 0.29″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Grooving Insert: YG602, Solid Carbide TiAlN Finish, Neutral, 0.157″ Cutting Width
• Corner Chamfer End Mill: 0.5512″ Dia, 1.6535″ LOC, 4 Flute, 0.011″ Chamfer Width, Solid Carbide 4.13 mm OAL, AlTiN Coated, Centercutting
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Grooving Insert: YG602, Solid Carbide TiAlN Finish, Neutral, 0.157″ Cutting Width
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 4 Flute, 0.0118″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Grooving Insert: YG602G, Solid Carbide TiAlN Finish, Neutral, 0.157″ Cutting Width
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Chamfer End Mill: 0.6299″ Dia, 1.2598″ LOC, 4 Flute, 0.0197″ Chamfer Width, Solid Carbide 3.66 mm OAL, AlTiN Coated, Centercutting
• Grooving Insert: YG602G, Solid Carbide TiAlN Finish, Neutral, 0.157″ Cutting Width
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Corner Radius End Mill: 0.315″ Dia, 0.748″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2.52″ OAL, 0.315″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Polyimide Film Tape: 1/4″ Wide, 36 yd Long, 3 mil Thick 30 Lb/In Tensile Strength, Acrylic Adhesive, 356 ° F
• Screw Machine Length Drill Bit: 0.18″ Dia, 135 °, Solid Carbide AlTiN Finish, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Compression Spring: 1.175″ OD, 6.25″ Free Length 0.162″ Wire Dia, 93.919 lb Max Load, 44.478 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 1/4″ Dia, 1-1/2″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 38 ° Helix, AlCromax Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 0.07″ Dia, 0.21″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.08″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Corner Radius End Mill: 0.09″ Dia, 0.27″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.08″ Dia, 0.24″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.16″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 1.939″ OD, 9″ Free Length 0.225″ Wire Dia, 139.244 lb Max Load, 40.286 lb/in Spring Rate, Stainless Steel
• Corner Radius End Mill: 0.6299″ Dia, 1.2598″ LOC, 0.12″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.6299″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Ball End Mill: 0.0469″ Dia, 0.125″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Turning Insert: TPMT 09 02 04-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series TPMT-PM
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 4 Flute, 0.0157″ Chamfer Width, Solid Carbide 3.31 mm OAL, AlTiN Coated, Centercutting
• Turning Insert: WPMT 02 01 04-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series WPMT-PF
• Corner Radius End Mill: 0.7874″ Dia, 1.4961″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 4.13″ OAL, 0.7874″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Turning Insert: DCGW2151TN012DA4, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Corner Radius End Mill: 3/8″ Dia, 3/4″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Turning Insert: DCGW3252TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Corner Radius End Mill: 0.7087″ Dia, 1.2598″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 3.66″ OAL, 0.7087″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Turning Insert: TPMT 09 02 08-PM 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series TPMT-PM
• Turning Insert: DCGW3255TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Corner Radius End Mill: 0.1181″ Dia, 0.315″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Stud-Mount Leveling Pads & Mounts; Bolt Thread Size: M12x1.25; Height (Inch): 8.25; Thread Size: TR55x12.0; System of Measurement: Metric; Bolt Length Measurement Type: Overall Length; Thread Size: TR55x12.0; Thread Size: TR55x12.0; Additional Information
• Turning Insert: TPMT 06 T1 04-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Triangle, Series TPMT-PF
• Turning Insert: DCGW2155TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: TPMT 09 02 04-PF 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Triangle, Series TPMT-PF
• Compression Spring: 0.588″ OD, 5.5″ Free Length 0.105″ Wire Dia, 55.816 lb Max Load, 40.697 lb/in Spring Rate, Stainless Steel
• Turning Insert: DCGW3252TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 2.115″ OD, 7″ Free Length 0.207″ Wire Dia, 143.961 lb Max Load, 38.881 lb/in Spring Rate, Music Wire
• Turning Insert: TCGW18151TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Corner Radius End Mill: 0.0787″ Dia, 0.2756″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Ball End Mill: 0.1563″ Dia, 0.5625″ LOC, 3 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 5/16″ Dia, 5/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2.19″ OAL, 5/16″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Turning Insert: TCGW2155TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Square End Mills; Number Of Flutes: 4; End Mill Material: Solid Carbide; End Type: Single; Centercutting: Yes; Chipbreaker: No; Extended Reach: Yes; Shank Type: Straight; Flute Type: Helical
• Turning Insert: CCGW21.51FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Screw Machine Length Drill Bit: 0.0625″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Compression Spring: 0.999″ OD, 8″ Free Length 0.092″ Wire Dia, 24.145 lb Max Load, 5.457 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.3937″ Dia, 1.1811″ LOC, 4 Flute, 0.0079″ Chamfer Width, Solid Carbide 3.23 mm OAL, AlTiN Coated, Centercutting
• Turning Insert: CCGW431FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Screw Machine Length Drill Bit: 0.055″ Dia, 118 °, Solid Carbide Coated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank, Series 206
• Compression Spring: 0.999″ OD, 4.75″ Free Length 0.112″ Wire Dia, 41.068 lb Max Load, 19.016 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCGW32.51FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Double Sided Tape; Material Family: Foam; Length Range: 1 yd. - 5.9 yd.; Width (Inch): 1; Thickness (mil): 62.5000; Adhesive Material: Acrylic; Tensile Strength (Lb./Inch): 140.00; Maximum Operating Temperature F: 380.000
• Turning Insert: TCGW18155FNA4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Corner Radius End Mill: 0.1575″ Dia, 0.4331″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 2.28″ OAL, 0.2362″ Shank Dia, Helix, AlTiN Coated, Centercutting
• Compression Spring: 1.469″ OD, 8″ Free Length 0.162″ Wire Dia, 102.916 lb Max Load, 25.132 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.078″ Dia, 0.062″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Turning Insert: TCGW18151FNA4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Compression Spring: 1.528″ OD, 3″ Free Length 325.946 lb Max Load, 422.401 lb/in Spring Rate, Music Wire
• Back Chamfers; Cutter Head Diameter (Decimal Inch): 0.1150; Included Angle: 90; Number of Flutes: 4; Chamfer Width (Decimal Inch): 0.020; Back Chamfer Material: Solid Carbide; Overall Length (Inch): 1-1/2; Neck Diameter (Decimal Inch): 0.0680; Shank Diame
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Nano Coated, Single End
• Turning Insert: RCMT85MOSN-SM CTCP135, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.4921″ Corner Radius, 0.0 &deg N/A Round, Series RCMT
• Ball End Mill: 0.062″ Dia, 0.05″ LOC, 2 Flute, Solid Carbide 2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Nano Coated, Single End
• Socket Extensions; Tool Type: Non-Tension Socket Flextensions; Extension Type: Non-Impact; Drive Size: 1/4; Finish: Black Industrial; Overall Length (Decimal Inch): 6.5700; Material: Steel
• Turning Insert: CCGW32.51FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• HM90APKT100325PDR 928 Carbide Milling Insert TiAlN Finish, 0.389″ Long x 0.139″ Thick x 0.2661″ Wide
• Turning Insert: CCGW21.5.5FNA3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Compression Spring: 0.881″ OD, 4″ Free Length 0.068″ Wire Dia, 11.893 lb Max Load, 4.852 lb/in Spring Rate, Stainless Steel
• Chucking Reamer: 0.2315″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Turning Insert: RCMT85MOSNSM CTCP115P, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.4921″ Corner Radius, 0.0 &deg N/A Round, Series RCMT
• Turning Insert: CCGW21.51FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• HM90APKT100325PDR 908 Carbide Milling Insert TiAlN Finish, 0.389″ Long x 0.139″ Thick x 0.2661″ Wide
• Chucking Reamer: 0.2335″ Dia, 3″ OAL, 1″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Turning Insert: CCGW432TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Grooving Insert: TDTRU TT7505, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDT-RU (Full Radius)
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Turning Insert: CCGW2155TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Grooving Insert: TDTRU TT5100, Solid Carbide TiN, TiCN, Al2O3 & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDT-RU (Full Radius)
• Corner Radius End Mill Head: 4 Flutes Solid Carbide
• Turning Insert: TCGW18151FNA4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: SNMG431SF T6130, Solid Carbide TiCN & TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 90.0 &deg N/A Square, Series SNMG
• Turning Insert: RCMT85MOSN-SM CTCP115, Solid Carbide TiCN & Al2O3 Finish, Neutral, 0.4921″ Corner Radius, 0.0 &deg N/A Round, Series RCMT
• Grooving Insert: TDTRU TT9080, Solid Carbide TiAlN & TiN Finish, Neutral, 0.315″ Cutting Width, Series TDT-RU (Full Radius)
• Turning Insert: TCGW21.5.5FNA4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW21.51FN_A4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW2152TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Grooving Insert: TDTRU TT6080, Solid Carbide AlTiNTiAlCrNTiN Finish, Neutral, 0.315″ Cutting Width, Series TDT-RU (Full Radius)
• Turning Insert: TCGW2155TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW18152TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGW18155TN012EA4, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: CCGW2151TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: CCGW431TN012EA3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/2″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: TCGW18152TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Compression Spring: 0.999″ OD, 4.75″ Free Length 0.192″ Wire Dia, 167.453 lb Max Load, 196.217 lb/in Spring Rate, Stainless Steel
• Turning Insert: CCGW432TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/2″ Inscribed Circle, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Press Fit Headed Drill Bushing: Type H, #35 ID, 1/4″ OD
• Turning Insert: CCGW3252TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Press Fit Headless Drill Bushing: P, 61/64″ ID, 1-3/8″ OD 3/4″ OAL, Carbon Steel
• Ring Wrench: 15 mm, 12 Point, Single End
• Corner Radius End Mill: 1/2″ Dia, 5/8″ LOC, 0.12″ Radius, 3 Flutes, Solid Carbide 3″ OAL, 1/2″ Shank Dia, 37 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series 2032
• Turning Insert: CCGW3251TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Ring Wrench: 12 mm, 12 Point, Single End
• Press Fit Headless Drill Bushing: P, 7/8″ ID, 1-3/8″ OD 3/4″ OAL, Carbon Steel
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 3.12; Overall Length (mm): 3.12; Material: Metal; Projection: 1.155 in; Finish/Coating: Brushed Nickel; Maximum Load Capacity: 3.00; Minimum Order Quantity: Metal; Material: Me
• Turning Insert: DCGW2152TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Press Fit Headless Drill Bushing: P, 3/4″ ID, 1-3/8″ OD 3/4″ OAL, Carbon Steel
• Turning Insert: DCGW3251TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Chucking Reamer: 0.197″ Dia, 3.3884″ OAL, 0.9062″ Flute Length, Straight Shank, Cobalt Steel 6 Flute, RH
• Press Fit Headless Drill Bushing: P, 31/32″ ID, 1-3/8″ OD 3/4″ OAL, Carbon Steel
• Turning Insert: DCGW3252TN012DA3, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Press Fit Headless Drill Bushing: P, 15/16″ ID, 1-3/8″ OD 3/4″ OAL, Carbon Steel
• Turning Insert: DCGW2155TN012DA4, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Black Double-Sided Urethane Foam Tape: 1/2″ Wide, 5 yd Long, 31 mil Thick, Acrylic Adhesive
• Turning Insert: CCGW2151TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• White Double-Sided Foam Tape: 3/4″ Wide, 125 mil Thick, Permanent Rubber-Based Adhesive
• Turning Insert: TCGW21.5.5FNA4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• White Double-Sided Foam Tape: 1/2″ Wide, 25 mil Thick, Acrylic Adhesive
• Turning Insert: DCGW32.51FN_A4 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Chucking Reamer: 0.1085″ Dia, 2-1/4″ OAL, 5/8″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Turning Insert: CCGW32.51FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 80.0 &deg N/A Diamond, Series CCGW
• Turning Insert: DCGW32.5.5FNA4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: TCGW21.52FN_A3 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Polyimide Film Tape: 1″ Wide, 50' x 1 mil Thick Non-Adhesive, -40 to 450 ° F
• Turning Insert: DCGW32.5.5FNA4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Compression Spring: 0.823″ OD, 8″ Free Length 0.148″ Wire Dia, 101.794 lb Max Load, 55.473 lb/in Spring Rate, Stainless Steel
• Turning Insert: DCGW21.5.5FNA4 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW32.52FN_A3 CTBH20U, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: TCGW18151FNA4 CTBS10U, Polycrystalline Cubic Boron Nitride Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• TNMG433EMU-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.8661″ Long, 1/2″ Inscribed Circle, 0.0472″ Corner Radius, 60° Included Angle, Series AC5000S
• Compression Spring: 1.939″ OD, 7″ Free Length 182.747 lb Max Load, 80.38 lb/in Spring Rate, Stainless Steel
• Milling Insert: WHH15X, Solid Carbide N/A Finish,
• All-Purpose & Utility Hooks; Mount Type: Adhesive Back; Overall Length (Inch): 0.73; Overall Length (mm): 0.73; Material: Plastic; Projection: 0.2 in; Finish/Coating: Plastic; Minimum Order Quantity: Plastic; Material: Plastic; Length (Inch): 0.73; Overal
• Spiral Flute Tap: M4 x 0.70, Metric, 3 Flute, Bottoming, 6HX Class of Fit, HSS-E, TiAlN Finish Right Hand Flute, Right Hand Thread, D4 & D5, Series 4630
• Spiral Flute Tap: M8 x 1.00, Metric, 3 Flute, Modified Bottoming, VC-10, V Finish Right Hand Flute, Right Hand Thread, D5, Series 348Ti
• Square End Mill: 1/4'' Dia, 1-1/8'' LOC, 1/4'' Shank Dia, 3'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 45 ° Helix, Centercutting, RH Cut
• Spiral Flute Tap: M4 x 0.70, Metric, 2-3 P, 6HX Class of Fit, Powdered Metal & High Speed Steel, TiN Finish Right Hand Flute, Right Hand Thread, D4
• Spiral Flute Tap: M2.50 x, 0.45, Metric, 3 Flute, Bottoming, 6HX Class of Fit, TiAlN Finish Right Hand Flute, Right Hand Thread, D3 & D4, Series 4630
• Ball End Mill: 0.047″ Dia, 0.071″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 42 ° Helix, TiB2 Coated, Single End
• Turning Insert: DNMG432ML TT8020, Solid Carbide TiCN Finish, Neutral, 0.6100″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Boring Bars; Boring Bar Type: Micro Boring; Cutting Direction: Right Hand; Minimum Bore Diameter (mm): 7.200; Material Grade: Submicron; Maximum Bore Depth (mm): 40.00; Shank Diameter (mm): 7.0000; Overall Length (mm): 66.0000; Finish Coating: AlTiN; Seri
• Chucking Reamer: 0.085″ Dia, 2″ OAL, 1/2″ Flute Length, Straight Shank, Solid Carbide 4 Flute, RH
• Ball End Mill: 0.02″ Dia, 0.12″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Edge Pulls; Width (Inch): 1-31/32; Depth (Inch): 1-1/2; Thickness (mm): 2.5; Hole Diameter: 3.5000; Distance Between Centers Width: 30.0000; Material Grade: 304; Finish/Coating: Black; Material: Stainless Steel; Material: Stainless Steel
• Micro Boring Bar: 0.0405″ Min Bore, 13/64″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, High Speed Steel, TiAlN Finish 3.25″ OAL, Right Hand Flute, Right Hand Thread, H11, Series TC117
• Jobber Length Drill Bit: 0.413″ Dia, 118 °, High Speed Steel Bright/Uncoated, 5.25″ OAL, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• Spiral Flute Tap: 1/4-20, UNC, 3 Flute, Semi-Bottoming, High Speed Steel, TiAlN Finish Right Hand Flute, Right Hand Thread, H7, Series TC117
• Ball End Mill: 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Ball End Mill: 0.06″ Dia, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 7.50; Load Capacity: 60 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 5.5; Ex
• Ball End Mill: 0.118″ Dia, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Amorphous Diamond Coated
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 7.50; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 5.5; Ex
• Milling Insert: LNHU120608-F57T WSP45G, WSP45G, Solid Carbide N/A Finish,
• Ball End Mill: 0.1875″ Dia, 0.285″ LOC, 6 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 36 ° Helix, AlTiN Nano Coated, Single End
• Compression Spring: 2.056″ OD, 4″ Free Length 0.207″ Wire Dia, 106.065 lb Max Load, 63.14 lb/in Spring Rate, Stainless Steel
• Micro Boring Bar: 0.0225″ Min Bore, 0.1″ Max Depth, Right Hand Cut, Solid Carbide 3/16″ Shank Dia, 1-1/2″ OAL
• Spiral Point Tap: BSP, 3 Flutes, 3 to 5, HSS-E, Steam Oxide Finish 100 mm OAL, Right Hand, Series 5731
• Swivel Top Plate Caster: Thermoplastic Rubber, 5″ Wheel Dia, 1-1/4″ Wheel Width, 298 lb Capacity, 6-1/8″ OAH 2.875″ Plate Length, 3.63″ Plate Width, Rollock Brake
• Corner Radius End Mill: 0.0787″ Dia, 0.0984″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0984″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Corner Radius End Mill: 0.0984″ Dia, 0.1181″ LOC, 2 Flutes, Solid Carbide 20 ° Helix, nACRo Coated, Corner Radius End
• Square End Mill: 1/2'' Dia, 1'' LOC, 1/2'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: DNMG432ML TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.6100″ Long, 1/2″ Inscribed Circle, 0.0310″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG
• Spiral Flute Tap: 5/8-18, UNF, 4 Flute, Bottoming, 2BX Class of Fit, HSS-E, Slidur Finish Right Hand Flute, Right Hand Thread, H5 & H6, Series 4655
• Turning Insert: DNMG431MT TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.5940″ Long, 1/2″ Inscribed Circle, 0.0160″ Corner Radius, 55.0 &deg N/A Diamond, Series DNMG