Products

• Boring Bar: 0.216″ Min Bore, 3/4″ Max Depth, Right Hand Cut, Solid Carbide 1/4″ Shank Dia, 2-1/2″ OAL, 0.006″ Corner Radius
• Corner Radius End Mill: 0.055″ Dia, 0.275″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Ball End Mill: 0.2969″ Dia, 0.8125″ LOC, 4 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.2969″ Dia, 0.8125″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.031″ Dia, 5/32″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.821″ OD, 7″ Free Length 0.177″ Wire Dia, 78.843 lb Max Load, 24.543 lb/in Spring Rate, Stainless Steel
• DCGT21.50.5RFYS Carbide Turning Insert Absotech Bronze Finish, 0.3031″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 55° Included Angle, Series AC5000S
• Ball End Mill: 0.025″ Dia, 0.037″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Corner Radius End Mill: 0.0236″ Dia, 0.0709″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• DCGT21.50RFYS-AC5015S Carbide Turning Insert Absotech Bronze Finish, 0.3031″ Long, 1/4″ Inscribed Circle, 0.0039″ Corner Radius, 0.0937″ Thick, 55° Included Angle, Series AC5000S
• 1/2″ Head Diam, 3/8″ Shank Diam, 6 Flute 82° Solid Carbide Countersink Bright Finish, 2-1/8″ OAL, 0.15″ Nose Diam, Single End, Straight Shank, Right Hand Cut
• Chamfer Mill: 5 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, Bright/Uncoated
• DCGT21.50.5LFYS Carbide Turning Insert Absotech Bronze Finish, 0.3031″ Long, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 0.0937″ Thick, 55° Included Angle, Series AC5000S
• Engraving Cutter: 1,200 °, 1/8″ Dia, Pointed Uncoated, 0.036″ LOC, 1″ Shank, 1-1/2″ OAL, 3 Flutes
• Corner Radius End Mill: 0.06″ Dia, 5/16″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Jobber Length Drill Bit: 0.368″ Dia, 118 °, Solid Carbide Bright/Uncoated, Right Hand Cut, Spiral Flute, Straight-Cylindrical Shank
• O-Ring: 5.859″ ID x 6.137″ OD, 0.139″ Thick, Dash 257, Viton Round Cross Section
• Square End Mill: 1/2'' Dia, 5/8'' LOC, 1/2'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, ZrN Finish, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 1026 & Alumigator
• Ball End Mill: 0.2969″ Dia, 0.8125″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.375″ Dia, 2 Flute, Solid Carbide 4″ OAL, 3/8″ Shank Dia, 45 ° Helix, ZrN Coated, Single End, Series 2015
• Square End Mill: 3/32'' Dia, 1-1/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 44 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 0.06″ Dia, 5/16″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 35 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/4'' Shank Dia, 2-1/2'' OAL, 5 Flutes, Solid Carbide Single End, AlTiN Finish, 37 ° Variable Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.008″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Turning Insert: VNGA332 AB20, Ceramic Al2O3 & TiCN Finish, Neutral, 0.6540″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.003″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 0.0276″ Dia, 0.0827″ LOC, 3 Flutes, Solid Carbide 37 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 3/32'' Dia, 17/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Turning Insert: VNGA331 AB30, Ceramic Al2O3 & TiCN Finish, Neutral, 0.6540″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VNGA
• Square End Mill: 0.013'' Dia, 0.039'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.04″ Dia, 0.06″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Electromagnet Lock Accessories; Type: Heavy Duty Door Cord; For Use With: Exit Devices; Material: Stainless Steel; Material: Stainless Steel; For Use With: Exit Devices; Type: Heavy Duty Door Cord; Accessory Type: Heavy Duty Door Cord; Type: Heavy Duty Do
• Square End Mill: 0.115'' Dia, 0.345'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.011'' Dia, 0.033'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.031″ Dia, 0.046″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.09″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 36.5 ° Helix, AlTiN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Square End Mill: 0.011'' Dia, 1/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 4 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Milling Insert: KDMB20M0ERGN, KCU15, N/A Finish, 0.7874″ OAW
• Chamfer Mill: 3 Flutes, Solid Carbide 1-1/2″ OAL, 3/16″ Shank Dia, Bright/Uncoated
• Compression Spring: 0.823″ OD, 3.5″ Free Length 0.125″ Wire Dia, 65.649 lb Max Load, 61.576 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.0781″ Dia, 0.125″ LOC, 4 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 3/32'' Dia, 0.279'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.04″ Dia, 13/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 2.056″ OD, 6.75″ Free Length 0.177″ Wire Dia, 95.708 lb Max Load, 23.49 lb/in Spring Rate, Music Wire
• Compression Spring: 2.056″ OD, 3.5″ Free Length 0.225″ Wire Dia, 186.287 lb Max Load, 116.131 lb/in Spring Rate, Music Wire
• Ball End Mill: 0.0313″ Dia, 0.125″ LOC, 2 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, TiCN Coated, Single End
• 29" to 46" Waist Tool Belt
• Ball End Mill: 0.0781″ Dia, 0.125″ LOC, 3 Flute, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Compression Spring: 1.351″ OD, 6.25″ Free Length 0.177″ Wire Dia, 141.942 lb Max Load, 54.499 lb/in Spring Rate, Music Wire
• Square End Mill: 0.04'' Dia, 1/16'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.05″ Dia, 1/4″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Compression Spring: 1.821″ OD, 2.75″ Free Length 278.606 lb Max Load, 306.591 lb/in Spring Rate, Music Wire
• Turning Insert: VNMG331CF T5115, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 35.0 &deg N/A Diamond, Series VNMG
• Combo Drill & Countersink: #11, 1/8″ Body Dia, High Speed Steel Bright (Polished) Finish, 3/64″ Point Dia, 1-1/4″ OAL, Right Hand Cut, Series 595
• Square End Mill: 3/64'' Dia, 0.071'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 3/32'' Dia, 0.139'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 0.045'' Dia, 0.068'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, nACRo Finish, 20 ° Helix, Centercutting, RH Cut, RH Flute
• Horizontal Locker: Padlock Hasp
• Square End Mill: 0.065'' Dia, 0.097'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, RH Cut, RH Flute
• Turning Insert
• Turning Insert: VNGA331 AC503U, Solid Carbide Super ZX Finish, 3/8″ Inscribed Circle, 0.0157″ Corner Radius, 35.0 &deg N/A Series AC503U
• Square End Mill: 0.1'' Dia, 19/64'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Radius End Mill: 0.047″ Dia, 1/4″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.1406″ Dia, 0.22″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 5/64'' Dia, 0.117'' LOC, 1/8'' Shank Dia, 1-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Compression Spring: 1.528″ OD, 2.375″ Free Length 0.162″ Wire Dia, 73.641 lb Max Load, 76.151 lb/in Spring Rate, Stainless Steel
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.87 mm OAL, ZrN Coated, Centercutting
• Document Protectors; Document Type: Sheet Protector; Material: Polypropylene; Color: Clear; For Document Width: 8.5 in; For Document Length: 11 in
• Square End Mill: 9/64'' Dia, 7/32'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 2 Flute, 0.0047″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Square End Mill: 9/64'' Dia, 7/32'' LOC, 3/16'' Shank Dia, 3'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Ball End Mill: 0.1969″ Dia, 0.5118″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Square End Mill: 0.3937'' Dia, 0.8661'' LOC, 0.3937'' Shank Dia, 2.6378'' OAL, 4 Flutes, Solid Carbide AlCrN Finish, 45 ° Helix, Centercutting, Series MXP
• Ball End Mill: 0.1181″ Dia, 0.315″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Ball End Mill: 0.315″ Dia, 0.748″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 2 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, ZrN Coated, Centercutting
• Ball End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Corner Chamfer End Mill: 0.3937″ Dia, 0.8661″ LOC, 2 Flute, 0.0039″ Chamfer Width, Solid Carbide 2.87 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.4724″ Dia, 1.0236″ LOC, 2 Flute, 0.0047″ Chamfer Width, Solid Carbide 3.31 mm OAL, Bright/Uncoated, Centercutting
• Corner Chamfer End Mill: 0.5512″ Dia, 1.0236″ LOC, 2 Flute, 0.0055″ Chamfer Width, Solid Carbide 3.31 mm OAL, Bright/Uncoated, Centercutting
• Ball End Mill: 0.1575″ Dia, 0.4331″ LOC, 2 Flute, Solid Carbide AlTiN Coated
• Square End Mill: 0.025'' Dia, 1/8'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 4 Flutes, Solid Carbide Single End, TiB2 Finish, 50 ° Variable Helix, RH Cut, RH Flute
• Micro Boring Bar: 6.2″ Min Bore, 20″ Max Depth, Right Hand Cut, YG812 Carbide 1.89″ OAL
• All-Purpose & Utility Hooks; Overall Length (Inch): 3; Finish/Coating: Dull Chrome; Maximum Load Capacity: 44.00; Width (Inch): 3; Minimum Order Quantity: Zinc Alloy; Type: Square Retractable Recessed Hook; Material: Zinc Alloy; Type: Square Retractable R
• Micro Boring Bar: 6.2″ Min Bore, 30″ Max Depth, Right Hand Cut, YG812 Carbide 2.28″ OAL
• Micro Boring Bar: 6.6″ Min Bore, 25″ Max Depth, Right Hand Cut, YG812 Carbide 2.09″ OAL
• Compression Spring: 0.705″ OD, 7″ Free Length 0.092″ Wire Dia, 33.459 lb Max Load, 11.674 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.056″ OD, 9″ Free Length 0.162″ Wire Dia, 74.789 lb Max Load, 12.862 lb/in Spring Rate, Music Wire
• Micro Boring Bar: 6.2″ Min Bore, 35″ Max Depth, Right Hand Cut, YG812 Carbide 2.48″ OAL
• Press Fit Headless Drill Bushing: P, 5/8″ ID, 1″ OD 2-1/2″ OAL, Carbon Steel
• Micro Boring Bar: 6.6″ Min Bore, 15″ Max Depth, Right Hand Cut, YG812 Carbide 1.69″ OAL
• Micro Boring Bar: 6.6″ Min Bore, 40″ Max Depth, Right Hand Cut, YG812 Carbide 2.68″ OAL
• Press Fit Headless Drill Bushing: P, 21/32″ ID, 1″ OD 2-1/2″ OAL, Carbon Steel
• Press Fit Headless Drill Bushing: P, 11/16″ ID, 1″ OD 2-1/2″ OAL, Carbon Steel
• Milling Insert: XDLX 09T308ER-F40 CTC5240, CTC5240, Solid Carbide N/A Finish,
• Milling Insert: XDLX 09T308SR-M50 CTCM245, CTCM245, Solid Carbide N/A Finish,
• Milling Insert: XDLX 09T308ER-F40 CTCS245, CTCS245, Solid Carbide N/A Finish,
• Grooving Insert: GMM3020150R TN90, Cermet Neutral, 3 mm Cutting Width, 20 mm Max Depth, Series KGM
• Compression Spring: 2.174″ OD, 7″ Free Length 0.207″ Wire Dia, 140.256 lb Max Load, 37.121 lb/in Spring Rate, Music Wire
• Compression Spring: 0.881″ OD, 3.5″ Free Length 0.125″ Wire Dia, 61.751 lb Max Load, 52.619 lb/in Spring Rate, Stainless Steel
• Spiral Flute Tap: #1-72, UNF, 2 Flute, Bottoming, 2B Class of Fit, Cobalt, GLT-1 Finish 0.157″ Thread Length, 1.772″ OAL, Right Hand Flute, Right Hand Thread, H3, Series BU51C400
• Clear Double-Sided Acrylic Tape: 1/2″ Wide, 40 mil Thick, Acrylic Adhesive
• Ball End Mill: 0.25″ Dia, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 45 ° Helix, Uncoated, Single End, Series 2014
• Duct Tape: 1/2″ Wide, 4 mil Thick, Aluminum Foil Acrylic Adhesive, 16 lb/in Tensile Strength
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 13.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Dec
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 6-Point; Wrench Size (mm): 3.20; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Decim
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 2.2 mm Cutting Width, 5 mm Max Depth
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 2.5 mm Cutting Width, 5 mm Max Depth
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Inch; Head Type: Offset; Box End Type: 12-Point; Wrench Size (Decimal Inch): 0.4380; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Le
• Grooving Insert: GE 30504, Solid Carbide Uncoated, Neutral, 3.6 mm Cutting Width, 5 mm Max Depth
• Milling Insert: WKK25S, Solid Carbide N/A Finish,
• Compression Spring: 2.115″ OD, 7″ Free Length 0.177″ Wire Dia, 93.153 lb Max Load, 21.652 lb/in Spring Rate, Music Wire
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 6-Point; Wrench Size (mm): 4.50; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Decim
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 6-Point; Wrench Size (mm): 3.50; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Decim
• Compression Spring: 2.115″ OD, 5.5″ Free Length 0.192″ Wire Dia, 116.813 lb Max Load, 37.172 lb/in Spring Rate, Music Wire
• Milling Insert: WKK25S, Solid Carbide N/A Finish,
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 6-Point; Wrench Size (mm): 6.50; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Decim
• Milling Insert: WSM35S, Solid Carbide N/A Finish,
• Compression Spring: 2.115″ OD, 3.5″ Free Length 0.225″ Wire Dia, 181.406 lb Max Load, 110.23 lb/in Spring Rate, Music Wire
• Compression Spring: 2.174″ OD, 3.5″ Free Length 0.225″ Wire Dia, 176.77 lb Max Load, 104.895 lb/in Spring Rate, Music Wire
• Chamfer Mill: 2 Flutes, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, Bright/Uncoated
• Square End Mill: 0.3937'' Dia, 0.7087'' LOC, 2 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Combination Wrenches; Handle Type: Ergonomic; I-Beam; Tool Type: Metric; Head Type: Offset; Box End Type: 12-Point; Wrench Size (mm): 18.00; Material: Chrome Alloy Steel; Finish: Chrome-Plated; Head Offset Angle: 15; Opening Angle: 15; Overall Length (Dec
• Turning Insert: DCGW2152TN011DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Spiral Point Tap: 1/4-28, UNF, 3 Flutes, Plug, 2B/3B, Powdered Metal, Steam Oxide Finish 3/4″ Thread Length, 2-1/2″ OAL, Right Hand, H3, Series 771
• Turning Insert: DCGW2152TN015GB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• 3/8″ Head Diam, 1/4″ Shank Diam, 6 Flute 82° High Speed Steel Countersink 2″ OAL
• Turning Insert: DCGW3251TN009CB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251SN009CB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Chucking Reamer: 0.43″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Turning Insert: DCGW21.51FN_B3 CTBH41C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW32.52EN_B3 CTBH21C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Chucking Reamer: 0.4355″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute
• Turning Insert: DCGW32.5.5ENB3 CTBH21C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Compression Spring: 0.411″ OD, 7″ Free Length 0.047″ Wire Dia, 8.825 lb Max Load, 2.503 lb/in Spring Rate, Stainless Steel
• Turning Insert: DCGW32.5.5FNB3 CTBH41C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251TN011DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252TN011DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Compression Spring: 1.821″ OD, 9″ Free Length 0.162″ Wire Dia, 62.369 lb Max Load, 13.681 lb/in Spring Rate, Stainless Steel
• CCMT21.52-UM 4425 Carbide Turning Insert Al2O3/TiN/TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0313″ Corner Radius, 3/32″ Thick, 80° Triangle
• Turning Insert: DCGW2151TN009BB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: SPMR 09 03 08 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series SPMR
• Compression Spring: 1.998″ OD, 8″ Free Length 0.162″ Wire Dia, 57.075 lb Max Load, 13.181 lb/in Spring Rate, Stainless Steel
• Turning Insert: DCGW3252SN015FB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Grooving Insert: GDM3020GL TN620, Cermet TiCN Finish, Neutral, 3 mm Cutting Width, 25.5 mm Max Depth, Series KGD
• Turning Insert: SPMR 09 03 04 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0156″ Corner Radius, N/A Series SPMR
• Turning Insert: DCGW3255TN011DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: SPMR 09 03 08-53 4425, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.0313″ Corner Radius, N/A Series SPMR-53
• Drawer Pulls; Handle Diameter: 0.7756; Width (Decimal Inch): 4.8980; Width (mm): 120.00; Length (Inch): 4-23/32; Projection: 1.3; Center to Center: 4-1/64; Thread Size: 3.5 x 20; Finish/Coating: Satin; Material Grade: 304; Minimum Order Quantity: Stainles
• Turning Insert: DCGW3255SN013DB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW21.5.5FNB3 CTBH41C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2151TN011DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3251SN014EB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW3252SN014EB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Compression Spring: 2.35″ OD, 4″ Free Length 0.207″ Wire Dia, 93.425 lb Max Load, 50.617 lb/in Spring Rate, Stainless Steel
• Turning Insert: DCGW32.51FN_B3 CTBH41C, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2155TN011DB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0079″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Inset Glass Door Hinge: 2 Mounting Holes Steel & Zinc Alloy, Black Finish
• White Double-Sided Polyethylene Foam Tape: 2″ Wide, 5 yd Long, 31 mil Thick, Rubber Adhesive
• Turning Insert: DCGW21.52EN_B3 CTBH21C, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Turning Insert: DCGW2151SN015GB3, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Catches; Type: Ultra Thin Magnetic Catch; Length (mm): 35.00; Height (mm): 2.8000; Width (mm): 12.00; Finish/Coating: Plain; Strike Length: 35.00; Strike Width: 15.00; Magnetic Force: 6.2; Minimum Order Quantity: Stainless Steel; Material: Stainless Steel
• Black Double-Sided Polyethylene Foam Tape: 2″ Wide, 5 yd Long, 31 mil Thick, Rubber Adhesive
• Turning Insert: DCGW3251TN015FB3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 0.0157″ Corner Radius, 55.0 &deg N/A Diamond, Series DCGW
• Recessed Pulls; Overall Width (Inch): 5-33/64; Overall Height (mm): 64.00000; Recess Width: 109.00; Recess Height: 34.00; Recess Depth: 11.00; Center to Center: 126.0000; Thread Size: M4; Finish/Coating: Black; Material: ABS; Polycarbonate; Material: ABS;
• Open End Wrench: Single End Head, 7/8″ 15 ° Head Angle, Vanadium Steel, Manganese Phosphate Finish
• Slide Bolts; Type: Barrel Bolt; Length (mm): 60.00; Width (mm): 26.50; Finish/Coating: Satin; Additional Information: Weight: 50 g; Screw: 2.7 x 16; Counter Plate Size: 14 x 33 x 0.8 mm; Overall Length: 80.3 mm; Minimum Order Quantity: 304 Stainless Steel
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 9.60; Load Capacity: 80 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 6.45; E
• Label Maker Label: White, Polyolefin, 1-1/2" OAW, 5,000 per Roll
• CCMT32.51FG TT5100 Carbide Turning Insert 0.362″ Long, 3/8″ Inscribed Circle, 1/64″ Corner Radius, 80° Diamond
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 9.60; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 6.45; E
• Turning Insert: CCMT32.52WT TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 9.60; Load Capacity: 40 lbs; Rod Diameter (Decimal Inch): 0.236; Tube Diameter: 0.590; End Fitting Connection: Plastic Ball Socket; Compressed Length: 6.45; E
• Turning Insert: CCMT32.52FG TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Lanyards; Material: Nylon; Color: Black; Length (Inch): 36
• Turning Insert: CCMT32.51MT TT8020, Solid Carbide TiCN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• Square End Mill: 1/2'' Dia, 2'' LOC, 1/2'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, Upcut Flute, 37 ° Helix, Centercutting, RH Cut, RH Flute, Series 2030
• Turning Insert: CPMT32.52PC TT9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Combination Wrench: Chrome Vanadium Steel, Chrome-Plated
• Turning Insert: CPMT32.52PC TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0310″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Spiral Flute Tap: M10 x 1.50, DIN & ANSI, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.575″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Spiral Flute Tap: M10 x 1.25, DIN & ANSI, 3 Flute, Modified Bottoming, 6H Class of Fit, HSS-E, Black Oxide Finish 1.575″ Thread Length, 3.937″ OAL, Right Hand Flute, Right Hand Thread, Series PER-893SF
• Impact Socket: 1″ Drive 6-Point
• Turning Insert: CPMT32.51PC TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Turning Insert: TNGA222FN_A3 CTBH40U, Polycrystalline Cubic Boron Nitride TiN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Turning Insert: TNGA222TN012DA3, Polycrystalline Cubic Boron Nitride TiCN Finish, Neutral, 1/4″ Inscribed Circle, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TNGA
• Turning Insert: CCMT32.50.5FA TT5100, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0080″ Corner Radius, 80.0 &deg N/A Diamond, Series CCMT
• 15mm Inside Diam, Headless LM Drill Bushing Liner 22mm Body Outside Diam, 16mm Overall Liner Length
• CCMT32.52FG TT5080 Carbide Turning Insert 1/32″ Corner Radius, 80° Diamond
• Note Pads, Writing Pads & Notebooks; Product Type: Composition Notebook; Paper Color: White; Style of Rule: College; Cover Color: Black Marble; Binding Location: Side
• Clear Double-Sided Polyester Film Tape: 2″ Wide, 8.3 mil Thick, Acrylic Adhesive
• Compression Spring: 1.116″ OD, 9.5″ Free Length 0.148″ Wire Dia, 103.512 lb Max Load, 25.458 lb/in Spring Rate, Music Wire
• Turning Insert: CPMT32.51PC TT5080, Solid Carbide AlTiN & TiN Finish, Neutral, 0.3820″ Long, 3/8″ Inscribed Circle, 0.0160″ Corner Radius, 80.0 &deg N/A Diamond, Series CPMT
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 12.00; Load Capacity: 20 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 8.5; E
• 5/8″ Head Diam, 3/8″ Shank Diam, 3 Flute 82° Cobalt Countersink Bright Finish, 2-1/4″ OAL, Single End, Straight Shank, Right Hand Cut
• Spherical/Ball Casters; Mount: Round; Grip Ring; Wheel Type: Solid Rubber; Swivel: Yes; Wheel Material: Neoprene Rubber; Wheel Width: 1; Brake Type: Pedal; Load Capacity: 125.00; Wheel Shape: Donut; Mounting Height: 2.625; Wheel Hardness Rating: 85 Shore
• Hydraulic Dampers & Gas Springs; Fitting Type: None; Material: Stainless Steel; Extended Length: 12.00; Load Capacity: 90 lbs; Rod Diameter (Decimal Inch): 0.315; Tube Diameter: 0.710; End Fitting Connection: Plastic Ball Socket; Compressed Length: 8.5; E
• Digital & Dial Protractors; Style: Protractor; Measuring Range (Degrees): 360.00; Resolution (Degrees): 0.0500; Accuracy (Degrees): 0.20; Includes: 12 & 14 in Blades; Battery; Instructions; Battery Type: CR2032
• Compression Spring: 2.056″ OD, 4.5″ Free Length 0.207″ Wire Dia, 147.864 lb Max Load, 63.726 lb/in Spring Rate, Music Wire
• Compression Spring: 0.999″ OD, 6.75″ Free Length 0.098″ Wire Dia, 28.66 lb Max Load, 8.104 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.351″ OD, 3.25″ Free Length 0.25″ Wire Dia, 306.286 lb Max Load, 537.526 lb/in Spring Rate, Music Wire
• Compression Spring: 1.528″ OD, 5.25″ Free Length 36.876 lb Max Load, 12.643 lb/in Spring Rate, Stainless Steel
• Ball End Mill: 0.031″ Dia, 0.025″ LOC, 2 Flute, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Corner Radius End Mill: 0.0079″ Dia, 0.0118″ LOC, 3 Flutes, Solid Carbide 42 ° Helix, Bright/Uncoated, Corner Radius End
• Document Protectors; Document Type: Document Frame; Material: Vinyl; Color: Assorted; For Document Width: 9 in; For Document Length: 12 in
• Corner Radius End Mill: 0.06″ Dia, 0.09″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Nano Coated, Corner Radius End, Centercutting
• Square End Mill: 1/32'' Dia, 3/32'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 6 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Ball End Mill: 0.093″ Dia, 0.14″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.125″ Dia, 0.188″ LOC, 4 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Square End Mill: 0.05'' Dia, 0.15'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, AlTiN Nano Finish, 41 ° Variable Helix, RH Cut, RH Flute
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.01″ Radius, 2 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Double Angle Milling Cutter: 90 °, 1/4″ Cut Dia, 1/8″ Cut Width, 1″ Shank Dia, Solid Carbide 2″ OAL, AlTiN Nano Coated, 4 Teeth
• Undercutting End Mills; Mill Diameter (Inch): 1/8; Overall Length (Inch): 3; Radius: 0.0625; Flute Direction: Right Hand; Cutting Direction: Right Hand; Variable Helix: No; Variable Index: No; Neck Length (Decimal Inch): 1.1250; Shank Diameter (Inch): 1/8
• Corner Radius End Mill: 3/16″ Dia, 3/8″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2″ OAL, 3/16″ Shank Dia, 45 ° Helix, ZrN Coated, Corner Radius End, Centercutting
• Ball End Mill: 0.031″ Dia, 0.25″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Ball End Mill: 0.156″ Dia, 0.234″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.1875″ Dia, 0.281″ LOC, 3 Flute, Solid Carbide 4″ OAL, 3/16″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Ball End Mill: 0.125″ Dia, 0.188″ LOC, 2 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 30 ° Helix, Uncoated, Single End
• Duct Tape: 1/2″ Wide, 3.5 mil Thick, Copper Foil Acrylic Adhesive, 25 lb/in Tensile Strength
• Corner Radius End Mill: 0.062″ Dia, 3/32″ LOC, 0.01″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Corner Radius End Mill: 0.031″ Dia, 3/64″ LOC, 0.005″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 34 ° Helix, AlTiN Coated, Corner Radius End
• Square End Mill: 13/64'' Dia, 5/16'' LOC, 1/4'' Shank Dia, 4'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• CCMT432-PM5WAK20 Carbide Turning Insert TiCN/Al2O3/TiN Finish, 12.9mm Long, 1/2″ Inscribed Circle, 1/32″ Corner Radius, 80° Diamond, Series Tiger-tec
• Turning Insert: TCGT18152FNA3 CTDPD20, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0315″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• Chucking Reamer: 0.0595″ Dia, 1.6942″ OAL, 0.3546″ Flute Length, Straight Shank, Cobalt Steel 3 Flute, RH
• Turning Insert: TCGW18155FNA4 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0079″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGW
• Turning Insert: TCGT18151FNA3 CTDPS30, Polycrystalline Diamond Uncoated Finish, Neutral, 0.0157″ Corner Radius, 60.0 &deg N/A Triangle, Series TCGT
• O-Ring: 1.62″ ID x 2.19″ OD, 1/4″ Thick, Viton Round Cross Section
• UHMW Film Tape: 1/2″ Wide, 5 yd Long, 15.2 mil Thick 55 Lb/In Tensile Strength, Rubber Adhesive, 225 ° F
• Screw Machine Length Drill Bit: 0.6094″ Dia, 130 °, Cobalt Bright/Uncoated, Right Hand Cut, Parabolic Flute, Straight-Cylindrical Shank, Series A920
• Turning Insert: CNMG643MT TT9225, Solid Carbide TiCN, Al2O3 & TiN Finish, Neutral, 0.7600″ Long, 3/4″ Inscribed Circle, 0.0470″ Corner Radius, 80.0 &deg N/A Diamond, Series CNMG
• Chucking Reamer: 7/16″ Dia, 7″ OAL, 1-3/4″ Flute Length, Straight Shank, High Speed Steel 6 Flute, RH
• Compression Spring: 2.233″ OD, 9.5″ Free Length 0.225″ Wire Dia, 121.973 lb Max Load, 30.069 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TDAA K10, Solid Carbide Uncoated, Neutral, 0.197″ Cutting Width, Series TDA
• Milling Insert: WKP35S, Solid Carbide N/A Finish, 1/8″ Insert Thick,
• Corner Radius End Mill: 1/16″ Dia, 1/4″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Press Fit Headless Drill Bushing: P, 5/8″ ID, 3/4″ OD 5/16″ OAL, Carbon Steel
• Corner Radius End Mill: 3/64″ Dia, 3/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Press Fit Headless Drill Bushing: P, 9/16″ ID, 3/4″ OD 5/16″ OAL, Carbon Steel
• Corner Radius End Mill: 1/16″ Dia, 1/4″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Press Fit Headless Drill Bushing: P, 5/8″ ID, 3/4″ OD 7/8″ OAL, Carbon Steel
• Polyester Film Tape: 3/4″ Wide, 72 yd Long, 3.3 mil Thick 50 Lb/In Tensile Strength, Silicone Adhesive, 400 ° F
• Corner Radius End Mill: 5/64″ Dia, 5/16″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/32″ Dia, 3/8″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Corner Radius End Mill: 3/8″ Dia, 1″ LOC, 0.09″ Radius, 3 Flutes, Solid Carbide 2-1/2″ OAL, 3/8″ Shank Dia, 35 ° Helix, ZrN Coated, Corner Radius End, Centercutting, Series CoroMill Dura
• Corner Radius End Mill: 3/32″ Dia, 3/8″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Square End Mill: 9/32'' Dia, 1/2'' LOC, 5/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Square End Mill: 17/64'' Dia, 1/2'' LOC, 5/16'' Shank Dia, 2'' OAL, 4 Flutes, Solid Carbide Single End, AlTiN Finish, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Chamfer Mill: 0.125″ Dia, 4 Flutes, Solid Carbide 3″ OAL, 1″ Shank Dia, AlTiN Coated